Construction work of C.c. Road and Drai From ambedkar park to Dangwale baba Mandir Ward 52. File No. 269/26X3/6.

Brick work in C.M 1:5 mix including all labour charges etc complete

Dismantling of existing structures by manual means comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead upto 1000 meter and as per relevant clauses of section-200in. Concrete Plain Cement Concrete Grade M-15 & M-20

Stone Masonry Rubble stone masonry in cement mortar.

Transportation By Mechanical means including loading, unloading and stacking Excavated Earth upto 3 km

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth upto 50 m and lift upto 1.5 m, disposed soil to be levelled and neatly dressed.

Earth work in excavation for drains by mechanical means / manual means (exceeding 30cm in depth.) including ramming of bottom, dressing of sides, disposal of excavated earth including of all lift and lead upto 50m. Disposed earth to be levelled and neatly dressed.Ordinary rock

Construction of granular sub-base, spreading in uniform layers with motor grader on prepared surface, mixing by Mix in Place Method at OMC and compacting with vibratory roller of 80-100 KN Static weight to achieve the desired density, including all lifts and lead complete in all respect as per Section-400 of the specifications. By Mix in Place Method Grading I

Construction of Dry Lean Cement Concrete Sub- Base Over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 26.5mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per Table 600-1 of the specifications, cement content not to be less than 150 Kg/Cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 MPa at 7 days, mixed in a batching plant, transported to site, laid with paver with electronic sensor/mechanical paver, compacting with 8-10 tonnes vibratory roller, finishing and curing and as per Section 601 of specifications. Deduct from Item No 6.1 above if paver with electronic sensor/ mechanical paver, is not used and laying is done by any other method.

Providing and Laying Cement Concrete Grade M-20 with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate / screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, including cutting of joints @ 4 to 5 m interval and filling it with hot applied bituminous sealant (without dowel bars) (max. thickness 20 cm).

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level. Cement concrete grade M-10 (Nominal Mix) with 40 mm maximum size of stone aggregate