Providing and laying Interlocking tiles and drain work in Village Salempur Gurjar, Greater Noida

Excavation in foundation in ordinary soil (Loam clay or sand) including lift upto 1.50 M and lead upto 30.00M and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer incharge upto a distance of 30m from the foundation trenches (where machine con not reach/move) (SOR/251 (A)/4.1.1)

Cartage of earth or fly ash when added to schedule item no. 253 : IInd Km. and beyond (SOR-20/261(b))

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads. Transporting to site, spreading, grading to required slope and compacted to meet requirement of Table No 300-2: lead upto of 5.00KM (MORTH--20/305/3.18)

Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks.(DSR-18/11.2)

Cement concrete with 4cm gauge Approved stone ballast coarse sand & cement in the proportion of 8:4:1 including supply of all materials labour tools & Plants etc required for proper completion of the work

8:4:1 (1 Cement 4: Coarse sand :8 graded stone aggregate 40mm nominal size) (SOR-20/281/5.08)

Providing and laying 80mm thick ISI mark Factory made cement concrete interlocking Paver block made by block making machine with strong vibratory compaction of approved size, Zig Zag shape, laid in grey colour of M-40 and pattern over and including average 50mm compacted bed and fine sand and filling the joints with fine sand all complete as per direction of engineer-in-charge with GNIDA/A.R.

M-150 brick work in 1:6 cement & fine sand 1.25 FM mortar in foundation and plinth including supply of all material labour and T&P etc required for proper completion of the work. (SOR-20/303) same as item no 303 but in 1:4 one cement & four fine sand of 1.25 F.M. mortar. (SOR-20/305) Same as item no 305 but in 1:4 one cement & four coarse sand of 2.20 F.M. mortar. (SOR-20/305(A))

12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) (DSR-18/13.4.2)

Cement concrete with 4cm gauge approved stone ballast, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. (SOR-20/279) Same as above item no 279 but with 2cm gauge stone grit instead of 4cm gauge stone ballast. (SOR-20/279(a)

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. (DSR-18/10.25)

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. (DSR-18/10.25.2)

Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Raising depth of manhole to be paid separately) :(DSR-18/19.26)

Circular manhole 140 cm dia with circular cover 600 mm dia of grade EHD - 35 (DSR-18/19.26.4)

Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91 m to 1.67 m: With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (DSR-18/19.10.1)

Labour cess and GST will be paid extra as per Govt. orders.