Annual repair of Haryana Government Housing Complex at Shalimar Bagh, Delhi Year 2020-21

Amount

Removing door and windows (wood and steel) with chowkats by making Recesses in walls when the wall is not to be dismantled [HSR 8.18] (a) Door

(b) Window

Scraping White wash and colour wash (HSR-8.32(a)

Dismantling white or coloured glazed tiles (to be carefylly removed) HSR-8.38)

Providing and applying two coats white cement based putty over plastered surface and grinding the surface smooth with sand paper to get an even and smooth finish including cost and carriage of all material, labour charges, scaffolding, sundries etc. complete (J.K/Birla make) (HSR-16.81)

Cement concrete 1:1½:3 with stone aggregate 20mm nominal size in pavemnets, roads, taxi-tracks and runways, lay to required slope camber, inclulding consolidation, finishing complete . [HSR 10.132 + 10.95 (a)]

Terracing terracing with one layer of tiles, 22.86 cm x 11.43 cm x 3.81cm laid dry over a layer mud mortar including grouting with cement sand mortar :3 and top surface to be left clean. [ HSR 13.14]

Cement concrete 1:2:4 gola 10 cm x10 cm quadrant along junction of roof with parapet wall finished smooth, where specially specified [HSR 13.64]

Providing & fixing PVC Rain Water pipe 6 kg. Pressure of ISI mark in cement mortar during masonry work. [HSR 13.89(a)] (a) 100 MM dia PVC pipe 6 kg. Pressure

Providing and fixing PVC Bend ISI Mark [HSR 13.90(a)] (a) 100 MM dia PVC Bend

Conglormerate floor 25 mm thick cement concrete topping 1:2:4 [HSR 14.8]

18mm thick gray polished skirting or dado consisting of bottom layer of 15mm thick cement sand plaster 1:3 and finished with 3mm thick topping of neat cement rubbed and polished including rounding off junction with floors. [HSR 14.18]

Providing marble stone flooring 17mm and above thick slab including matching grains of marble laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of marble including rubbing and polishing . [ HSR 14.49 ] (a) (i)

Providing and laying marble stone 17mm and above thick in risers of step, skriting, dado, pillars and wall lining including matching the grains of marble slab in any pattern specified laid on 12mm thick cement coarsed sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of marble including rubbing and polishing including labour for fixing cramps, pins and dowels etc. [ HSR 14.52 ] (a) (i)

P/L Kotah stone flooring in any pattern as specified over a base of 12 mm thick cement mortar . [HSR 14.62]

Kotah stone 20 mm thick in skirting riser of steps, dados, pillars and wall facing (lining) in any pattern as specified laid on 12 mm thick cement coarse sand plaster 1:3 laid and jointed with neat cement slurry,complete. [ HSR 14.66 ]

Providing and fixing ceramic & Glazed tiles / vitrified tile / of any size of approved make in floors/dados,laid in any pattern as specified over base of 3 mm thick adhesive of reputed brands such as Pidilite,Laticrete,Ferrouscrete & Valendure as per IS specification 15477-2004 using 5 Kg .adhesive slurry mixed with pigment to match the shade of tiles including cost of tiles. [HSR 14.97] Vitrified tiles of any size

Providing and fixing Ist quality ceramic glazed wall tiles confirming to I.S. 15622 (thickness to be specified by the manufacturer of approved make in all color, shade except Burgundy bottle green, Black of any size is approved by the Engineer-in-Charge in skirthing risers of steps and dados over 12mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cemnt mixed with pigment of matching shades complete. (b) Size of ceramic Glazed tiles 300 x 450mm [HSR 14.92(b)]

12mm thick cement plaster 1:6 complete. [ HSR 15.7]

Rough cast exterior cement plaster on walls with mixture sand and graveel or curest stone greated from 2.36 mm to 12mm [ HSR 15.18]

Painting one coat with synthetic enamel paint in all shades on old wood work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint. [HSR 16.7]

Distempering with washable oil bound distemper ( of approved brand & manufacture ) one coat on old distempered work. [ HSR 16.59 ]

Distempering with washable oil bound distemper (of approved manufacture) two coats on old distempered work. (HSR-16.60)

Providing and fixing 0.5mm thick aluminium sheet , including the cost of necessary screws etc., complete. [ HSR 17.87 ]

Factory-manufactured panelled door or glazed window, shutters of commercial hard wood, such as hollock, champ, chikrassy and chaplash, etc., (non -coniferous timber other than teak, conforming to I.S. spcification No. 1003, kiln-seasoned), with 100 mm wide vertical styles, (b) 35 mm thick[ HSR17.90(b)]

Factory-manufactured wire gauge door and window shutters of commercial hard wood, such as hollock, champ, chikrassy and chaplash, etc., (non -coniferous timber other than teak, conforming to I.S. spcification No. 1003, kiln-seasoned), with 100 mm wide vertical styles, ur for fixing the same in position).[HSR17.92( ii )]

Factory-manufactured solid flush door shutters, with block board core as per I.S. No. 1659-1969 bonded with water proof type phenol formaldehyde synthetic resin, hotpressed, conforming to I.S. 2202 part I and II, fixed in position, including iron hinges, screws, chocks/cleats and stops etc., (excluding the cost of any fittings other than specified above, but including labour for fixing the same in position. [HSR 17.93]

Supplying and fixing glass panes including special metal sash putty, of approved make(b) Glass Panes 4 mm thick. Exceeding 40 sqdm area [HSR 18.30(b)]

Pressed steel sheet frames (chowkats), consisting of 2 mm thick steel sheet of the specified sections, including iron lugs (hold fasts), iron hinges, conforming to P.W.D. specifications, including bolts for fixing stops, locknotch, provision for receiving tower bolts, and finished witnone coat of ready mixed paint etc. [HSR 18.34(a)] (a) Door and window frame of size 89 mm x 50 mm with 40 mm wide single rebate

Providing and fixing M S angle and T-iron Frames for door, window and ventilator including iron hold fast, butt hinges of I.S.I mark fixed in positon with machine screws and duly welded including all other suitable locking arrangements provided and welded [HSR 18.35]

Grinding & Polishing of exitsing marbal flooring as per requirement of Engineer-in-Change.[NS 1]

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.[DSR 17.92]

Providing and fixing anti skid tiles of any size in floor laid in any pattern as specified over base on 3mm thick adhesive of reputed brands such as pidilite, laticreto, ferrouscrete & Valendure as per I.S. specification 15477-2004 using 5 kg adhesive per Sqm area of tiles and jonted with white cement slurry mixd with pigment outmatch the shade of tiles including cost of tiles [NS 2]

Vikas Sharma Contractor