Creation of Sub Stations along with HT/LT Lines for providing dedicated Power Supply to PHE Site at Bakhatpur-II

Amount

Laying of 11KV Line on 9 Mtr Long ST Poles for PHE Station at Bakhatpur-II on Turnkey Basis by way of Supply, Erection/Installation, Testing, commissioning etc of the following material(except S.no.1.01):-

9.0 Mtr Long ST Poles(410SP33) (Poles are lying at Tandi and as such only carriage and erection charges are to be quoted)

GI V-cross arm with top bracket including clamp

GI Channel X-arm, MS. angle, including clamps and braces

30mm² ACSR weasel Conductor

11KV Polymeric Composite Pin Insulator 12KV ,5KN Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm

Galvanized Nuts and Bolts

11KV Polymeric Composite disc Insulator 12KV ,Min. failling load 45 KN,

Galvanised Stay Set with 50x8mm stay clamp, guy insulator(2Nos.), anchor plate (200 x 200 x 6 mm), nut-bolts, 2 Nos turn-buckles, 1.8m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete

11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type

Anti Climing Devices

Danger plates

Red Oxide

Aluminium paint

Cement bottoming 1,2,4 Mix as per REC standred 0.5 Cum/ pole

Pole Earthing complete by GI Pipe of 40mm or GI Rod 20mm, 2.5Mtr Long throigh GI Strip of 25X3mm to each Pole

Creation of 100KVA Sub Station for PHE Station at Bakhatpur-II on Turnkey Basis by way of Supply, Erection/Installation, Testing, commissioning etc of the following material(except S.No.2.06)

11/0.433KV, 100 KVA( Al wound) , 3-phase Distribution Transformers with Bimetallic Terminal Connectors, Energy Efficiency Level-2.

Gapless Surge Arrestor,9 kV ,10 kA ,LA with polymer housing, Stn. Type

11kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type

11 KV Horn Gap Fuse Set 3 Phase 200A

185 mm² Single-Core Cable,1.1KV Grade, PVC Insulated Stranded Conductor FRLS type

9Mtr ST Pole (SP410-SP33) (Poles are lying at Tandi and as such only carriage and erection charges are to be quoted)

11kV Polymeric composite Disc Insulator 12kV,min failing load 45KN, Lightening Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

GI Channel/Angle/Flat of sizes including clamps( Sizes and quantity as per Drawing No. F-2 of REC Construction Standards)

Galvinized Nuts and Bolts.

Earthing of substation -Earthing by GI Pipe 40mm or GI Rod 20mm 2.5 Mtr Long through GI Strip of 50 X 6 mm for Neutral earthing, 25 X 3mm for 2 Nos. Transformer body earthing as per J-2 REC Drawing. 1 No. LA Earthing 1 No. G.O Earthing Note:- For LA Earth 1 Pipe shall be kept seperatly

GI barbed wire for aniclimbing

11KV Polymeric Composite Pin Insulator 12KV ,5KN Lighting Impulse 75KV Positive and 80KV Negative, creepage distance 320mm

Pre fabicated LT switch

Galvanised Stay Set with 50 x 8 mm Stay Clamp, Guy Insulator (2 Nos), Anchoring Plate (200 x 200 x 6 mm), Nut & Bolts, 2 No Turn Buckle, 1.8m long, 16 mm diameter solid Stay Rod & 7/3.15 mm dia stranded wire complete

LT Prodigy Meter

Cement bottoming 1,2,4 Mix as per REC standred 0.5 Cum/ pole

Red Oxide

Aluminium paint

Sundary Items like Aluminium Bus Bar,Aluminium Lugs,Jumpers,Binding tapes etc

Danger Plate with Clamps

Laying of LT Line on 8 Mtr Long ST Poles(3Phase 4 Wire) for PHE Station at Bakhatpur-II on Turnkey Basis by way of Supply, Erection/Installation, Testing, commissioning etc of the following material (except S.No.3.01)

8.0Mtr ST Pole(410-SP-15) (Poles are lying at Tandi and as such only carriage and erection charges are to be quoted)

GI Mukki clamps for Shackle insulator

16 KN Polymer Shackle insulator

Galvanized Nuts and Bolts

ACSR Weasel Conductor

Danger Plates with clamps

Red oxide Paint

Alm.Paint

Cement Bottoming 1:2:4 mix as REC Standrd

M/S MAHALAXMI ENTERPRISES

M/S SUKRALA ELECTRICAL WORKS