Execution of work under Minor Civil and Electric Work (Conservation of Ancient Monument) To Structural repair and Construction of Dwarf wall around at Jarai ki Mariha.

Earth work in excavation by manual means in foundation of boundary wall (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (ordinary rock)

Providing and laying cement concrete 1:4:8 (1 cement: 4 coarse sand: 8 stone aggregate of 20 mm nominal size) in foundation of boundary wall including ramming compacting and curing etc complete.

Random rubble masonry with cement mortar 1:6 (1 cement: 6 coarse sand) in foundation and plinth of boundary wall including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) upto plinth level etc complete.

Providing and laying in position specified grade of reinforced cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) in plinth of wall excluding the cost of centering, shuttering, finishing and reinforcement etc complete.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars.

Form work of cantering and shuttering including strutting, propping etc and removal of form for roof height of 3 mtr height including labour and material etc complete for Plinth beam.

Coursed rubble masonry of boundary wall in cement mortar 1:6 (1 cement: 6 coarse sand) with hard stone (first sort) in superstructure above plinth level etc complete.

Supply and fixing of MS grill fencing on the boundary wall for safety and security of the site with MS angle 40x40x5mm vertical post and same size angle horizontal support of top middle and bottom for adjoining the frame 12 mm dia bar with arrow headed on top and placed vertically at a distance of 100 mm c/c and fixed together by nut bolt etc complete as per design/drawing attached. (Grill Panel size 2.00x1.50 mtr).

Supply and fixing M.S. Gate with two leaf with angle iron 40x40x5 mm, flat iron 40x5 mm and 12 mm dia bars with arrow headed on top and placed vertically at a distance of 100mm c/c fabricated as per design/drawing attached including all the supply of materials fabrication and fixing of the same. Required proper completion of work at the site. (Size 2.00 x 1.80 mtr)