Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.0 LAccepted-Finance H 11 HOUSING BOARD UNIT MADHAYANKUTTAI P O METTUR DAM 636452 | METTUR DAM | SALEM | TAMIL NADU | 636452 | ₹2.0 L | L1 | Accepted-Finance L1 |
| Rank | Bidder | Total Amount |
|---|---|---|
| L1 | KPRABHAKARAN ENGINEERING CONTRACTOR Bid ID 1600602 | ₹2,00,915 |
| Sl No | Description | Qty | Unit | KPRABHAKARAN ENGINEERING CONTRACTOR L1 |
|---|---|---|---|---|
| 1.00 | Charges for Disconnection of power cable, Decoupling, releasing the motor from its bed, shifting to repair bay. | 1 | Nos | 5,420 ₹5,420 |
| 2.00 | Charges for Dismantling of the motor pulley discs and pulley sleeve (12 Groove belt pulley) | 1 | Nos | 8,850 ₹8,850 |
| 3.00 | Charges for Dismantling of the motor’s air cooler, fan hub, end covers, and threading out the rotor. | 1 | Nos | 14,330 ₹14,330 |
| 4.00 | Charges for Overhauling of coolers : Checking and cleaning of cooler tubes. | 1 | Nos | 5,490 ₹5,490 |
| 5.00 | Charges for Overhaul of Stator: cleaning the stator windings, checking and tightening of loose wedges in the stator by inserting additional glass textolite liners and replacing all damaged wedges by new one and spraying one coat of Dr.Beck insulation varnish, drying out, & stator pre heating. | 1 | Nos | 15,340 ₹15,340 |
| 6.00 | Charges for Overhaul of Rotor : Cleaning & inspection of the rotor, checking the position of stampings, cleaning the corroded parts, inspection of winding bars, soldered end winding and spraying one coat of Dr.Beck insulation varnish in rotor and drying out. | 1 | Nos | 9,260 ₹9,260 |
| 7.00 | Charges for Releasing the DE bearing, Cleaning, checking and refixing with new one if found necessary or fixing the old bearings is found healthy (Bearing will be provided by TNPGCL) | 1 | Nos | 7,470 ₹7,470 |
| 8.00 | Charges for Releasing the NDE bearing, cleaning, checking and refixing with new one if found necessary or fixing the old bearing is found healthy. (Bearing will be provided by TNPGCL) | 1 | Nos | 7,470 ₹7,470 |
| 9.00 | Charges for Assembling the motor after threading in the rotor, fixing end covers, providing rubber gasket and fixing cooler unit. | 1 | Nos | 14,330 ₹14,330 |
| 10.00 | Charges for Fixing motor pulley sleeve, pulley discs in complete shape. | 1 | Nos | 8,850 ₹8,850 |
Updated dates
Tender Value
Refer Docs
EMD Value
₹1,800
Closing Date
19 Feb 2026, 2:00 pmClosed
CHIEF ENGINEER/MTPS-I
CHIEF ENGINEER MTPS-I METTUR DAM
MTPS-I ES Circle EM-II SD III Releasing Dismantiling inspection complete overhaul and bearing replacement of any one 225KW 6.6KV,HT motor Kirloskar make in AHPH stage I and any one 200KW crompton make 190KW Siemens Make HT Motor in AHPH Stage II in t
2026_EB_654569_1
CE-MTPSI-SE-ES-EM2-OT136-25-26
Open Tender
Electrical Works
20 days
MTPS-I/METTURDAM
As per tender specification
4 documents required · 4 mandatory
₹0
₹1,800
Yes
20 Feb 2026
10 Feb 2026
19 Feb 2026
10 Feb 2026
19 Feb 2026
10 Feb 2026
Charges for Disconnection of power cable, Decoupling, releasing the motor from its bed, shifting to repair bay.
Charges for Dismantling of the motor pulley discs and pulley sleeve (12 Groove belt pulley)
Charges for Dismantling of the motor’s air cooler, fan hub, end covers, and threading out the rotor.
Charges for Overhauling of coolers : Checking and cleaning of cooler tubes.
Charges for Overhaul of Stator: cleaning the stator windings, checking and tightening of loose wedges in the stator by inserting additional glass textolite liners and replacing all damaged wedges by new one and spraying one coat of Dr.Beck insulation varnish, drying out, & stator pre heating.
Charges for Overhaul of Rotor : Cleaning & inspection of the rotor, checking the position of stampings, cleaning the corroded parts, inspection of winding bars, soldered end winding and spraying one coat of Dr.Beck insulation varnish in rotor and drying out.
Charges for Releasing the DE bearing, Cleaning, checking and refixing with new one if found necessary or fixing the old bearings is found healthy (Bearing will be provided by TNPGCL)
Charges for Releasing the NDE bearing, cleaning, checking and refixing with new one if found necessary or fixing the old bearing is found healthy. (Bearing will be provided by TNPGCL)
Charges for Assembling the motor after threading in the rotor, fixing end covers, providing rubber gasket and fixing cooler unit.
Charges for Fixing motor pulley sleeve, pulley discs in complete shape.
Charges for Painting two coats with D.A grey enamel paint. Total area of the motor is 15m2.
Charges for Shifting the motor to its bed, connection of power cable, alignment, coupling the motor with pump and trial run
Charges for disconnection of power cable, Decoupling, releasing the motor from its bed, shifting to repair bay
Dismantling of the motor pulley, fan hub, end covers, cleaning and threading out the rotor.
Overhauling of coolers: Dismantling of motor air cooler and Checking & cleaning (Applicable for 200 KW motor )
Overhaul of Stator: cleaning the stator windings, checking and tightening of loose wedges in the stator by inserting additional glass textolite liners and replacing all damaged wedges by new one and spraying one coat of Dr.Beck insulation varnish, drying out, & stator pre heating.
Overhaul of Rotor: Cleaning & inspection of the rotor, checking the position of stampings, inspection of winding bars, soldered end winding and spraying one coat of Dr.Beck insulation varnish in rotor and drying out.
Releasing the DE bearing Cleaning, checking and refixing with new one if found necessary or fixing the old bearings if found Healthy. (Bearing will be provided by TNPGCL)
Releasing the NDE bearing cleaning checking and refixing with new one if found necessary or fixing the old bearings if found healthy. (Bearing will be provided by TNPGCL)
Assembling the motor after threading in the rotor, fixing end covers & pulley.
Shifting the motor to its bed, connection of power cable, alignment, coupling, and trial run.
Charges for painting the motor with two coats of DA grey colour synthetic enamel paint. Total area of motor is 18m2
D.A. Grey paint (3 Ltrs./ motor)
Dr.Beck Insulation varnish (2 Ltrs./ motor)
Cost of Consumables
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.79 MB
BOQ_784880.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid