Repair and Maintanence works at Vijayapuram and Anna Nagar Toilet in Pollachi Municipality

Removal of existing damaged old plaster surface including all labour charges and clearing away from the site etc complete as per std specification (W-0104)

Plastering with cement mortar (1:5) Mix (one cement & five P-sand) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT

Plain Cement Concrete 1:4:8 (one cement four Parts of crushed stone M-sand and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification (The crushed stone sand to be used on cocrete work shell conform to gradation as per IS :383-1970 )

Plain Cement Concrete 1:2:4 (one cement, two Parts of crushed stone M-sand and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification (The crushed stone sand to be used on cocrete work shell conform to gradation as per IS :383-1970 and aiso as per IS 456-2007)

Paving the floor with design Antiskit ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement & Three P-sand) thick laid in-situ and pointed with same coloured cement mixed with colouring pigments (The crushed stone P-sand to be used in base mortar shell confom to gradation as per IS 1542-1977)

Supply and fixing of MS Steel doors with double shutter steel door frames made out of M.S angles of size 40x 40 x 6mm and shutter made out of MS angle of size 35 x 35 x 5mm MS equal angle frame as horizontal and vertical and the shutter frame to be strengthen by stiffer using MS flat of size 30 x 6mm, 2 Nos horizontal and 3 Nos diagonal with covered with 18 gauge MS sheet to be wide with frame neatly with the required tower bolts, al drops handles looking arrangement and handles etc, including fixing the shutters should be painted with one cost of redefined primer and transporting top the site etc, The rate is including of dismantling the masonry or making the holes in columns beams etc, etc/,, wherever necessary to the exit required with power drill and redoing the same to the original condition etc, completed as per standard specification.

Supply and fixing in position of Indian Water Closet of Size 580x440mm white gazed earthen ware of approved quality with ‘P’ or ‘S’ trap conforming to IS 2556 –part-xii with sand cushion and forming flooring alround the closet using 40mm metal jelly in cement concrete 1:5:10 mix 100mm thick and finishing the top to required slope and including giving necessary connection to PVC soil pipes by dismantling brick masonry, reinforced cement concrete roof/ floor slab and making good the disturbed portion to original condition with out leakages etc complete complying with standard specifications and as directed by the departmental officers. [ the water closet should be got approved by the municipal engineer be fore use ] where ever necessary

Terrace flooring with Hydraulic pressed tiles of size 20x20x2cm lain in CM 1:3 [one cement, Three sand] 12mm thick mixed with water proofing compound conforming to L.S at 2% by weight of cement used and the top pointed with same mortar mixed with red oxide to the full depth of tiles including cost and conveyance of all materials and all labour charges etc., complete as per standard specification and as directed by the departmental officers.

Supply and fixing of single box type 4’ x 40W fluorescent fitting complete with copper choke ,condenser starter lamp with TW round block on wall or ceiling with tube with PVC unsheathed leads from terminal to the fitting tube light etc., complete (SD 88)

Wiring with 2x1.5sqmm(22/0.3) PVC insulated unsheathed SC. Cu.Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A F.T. switch inflush with wall, covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light / fan point (For electronic regulator) (5 Points Per Coil) SD 22

Supply and fixing of 2000 litr HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixibng of the G.I pipes and specials for ppe connection works including cutting, threading and fixing charges etc. 2000 litr sintex tank

PVC Specials

Supply and delivery of UPVC Pipe (Un-Plasticized Polyvinyl Chloride) UPVC used for commercial applications operate and designed to handle higher water pressure (Schedule-80)(M-1084)

UPVC Tea (M-1123)

UPVC Elbow (M-1117)

UPVC Coupling (M-1140)

PVC Screw Down Tap Heavy Type 20mm dia (M-0510 )

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.