Renovation of Tehsildar Residence at Sunni Distt. Shimla H.P

Demolishing RCC work manually / by mechanical means including stacking of steel bars and disposal of unservicable material with in 50 meters lead as per direction engineer-in-charge.

Demolishing brickwork manually /by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50m lead as per direction of Engineer-in-charge

Dismantling tile work in floors and roofs laid in cemnet mortar including stacking material within 50 meters lead.Including carriage of material upto all leads and lifts as per the direction of Engineer-in-Charge.

Dismanting doors , window and celerstory windows (steel or wood) shutter incluidng chowkhats architrave, holdfasts etc. complete and stacking within 50 metere leasd : of area beyond 3 sq metres.

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundatior trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m, Including carriage of material upto all leads and lifts as per the direction of Engineer-in-Charge.

Providing and laying mechanically mixed and vibrated cement concrete 1:6:12 (1 cement: 6 sand: 12 graded stone aggregate 40 mm nominal size) and curing complete including cost of form work in foundation and plinth.

Centering and shuttering including strutting, propping etc. and removal of form for:

Foundations, footings, bases of columns, etc. for mass concrete

Columns, Pillars, Piers, Posts and Struts.

Lintels, beams, plinth beams, girders, bresumes and cantilevers.

Suspended floors , roofs landings , balconies and access platform

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.

All works upto plinth level

All works above plinth level upto floor V level

Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. (5.22.1) Mild steel and Medium Tensile steel bars

Stone soling/boulder filling dry land packed in under floor as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

1:4:8 (1 Cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size)

Half brick masonry with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.

Providing and laying 15mm (fifteen milimetre) cement plaster in single coat on the fair side of brick/concrete/stone wall for interior plastering upto floor all level including arises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (Eighty milimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement: six sand) including carriage of materials with in all leads, lifts and other incidentals as per the directions of Engineer-in-Charge. Fair Side

Applying birla white wall care putty over plaster surface after throughly brushing the surface free mortar dropes, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete.

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.

Providing and laying Mat finished vitrified tiles 60x60 cm in size (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete.

Providing and laying Ceramic glazed floor/wall tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), Jointing with grey cement slurry @3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including IS1 marked M.S pressed hurt hinges bright finished of required size with necessary screws. Second class deodar wood 35 mm thick

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per 15 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete 150x10 mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete 125 mm

Providing and fixing 0.60 mm thick plain prepainted steel sheet roofing, with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating ic fixing with prepainted iron Jor L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesorices as required as per the direction of Engineer-in-charge.

Providing and fixing M.S. BP Sheet 1 66mm to 2.00 mm thick in eaves board/facia/soffits ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely)/F M.S BP sheet 1.66mm to 2.00mm thick in eaves board Facia/Soficta/Ceiling including cutting fixing and welding to steel roof member and applying a coat of Red Ical primer complete.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Trusses and trussed purlins in buildings

Providing wood work in trusses, purlins, rafters, pests, post plates, wall plates and the like wrought framed, hoisted and fixed in position. 2nd class deodar wood.

Providing and fixing to wall ceiling and floor galvanized mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floors as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete 25 to 40 mm nominal bore

Providing and fixing viterious china wash down (European type WC pan) Cat no. 20049 with integral part or strap including jointing the trap with soil pipe in cement mortar 1:1 EWC in white shade of Hindware or its Anglo Indian universal closet

Providing and fixing 10.00 Itr (ten litre) capacity PVC low level flushing cistern Hind ware sleek ultra design No 186575 size 42 X 39 X 14 cm (forty two into thirty nine into fourteen centimetre) or equivalent with a pair of brackets with fittings such as lead valve, syphon, 15mm nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and overflow pipe, 40mm (forty milimetre) dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow) pipe to be measured and paid for separately including carriage of materials within all leads and lifts.

Providing and fixing plastic seat cover solid hollow for wash down water closet with C.P brass hinges and rubber buffers

Providing and fixing PVC 'P' or 'S' trap for water closet (squatting pan) including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete.

Providing and fixing 8 mm dia C.P/S.S. Jet with flexible tube upto 1 metre long with S.S.triangular plate to European type WC. of quality and make as approved by Engineer -in-charge.

Providing and fixing wash basin of size 55 X 40 cm of viterous China Hind ware IS marked IS No. 2556 or equivalent wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting including carriage of materials within all leads and lifts:-

Providing and fixing 600mm x 450 mm (six hundred x four hundred fifty millimetre) beveled edge mirror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 15 mm (Fifteen millimetre) dia C.P. Brass pillar tap with Capstan head 15 mm dia of Jaguar as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals..

Providing and fixing 15 mm (Fifteen millimetre) dia CP Brass angle cock as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing & fixing 32 mm dia, PVC waste pipe for wash basin or sink including check nut including carrage of material within all leads and lifts-

Providing and fixing high pressure uPVC spigot and socket waste and ventilating pipes including fixing with approved adhesive etc. complete 110 mm dia

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of materials within all leads and lifts:- 110 mm X 90 mm.

Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete including carriage of materials within all leads and lifts:-