WBPHED /EE/AMD/NIeT-02 of 2024-2025/6

Amount

Supply and Delivery of Following Materials at site:-

3 Core X 10 Sqmm Aluminum Armored, XLPE insulated 1.1 K.V. grade cable, conforming to IS 7098(I) as per direction of EIC. (Make:- Gloster/ or any approved make. ) ( N.B : Manufacturer's test certificate have to be submitted at the time of delivery.)

3 Core X 6 Sqmm 1.1 KV Grade flat submersible copper conductor cable as per IS:7098(Part-I). (Make:-Gloster/ or other approved make. )

Withdrawing of submersible pumping machineries from old river bed Tube Well along with Column pipe after disconnection of all pipe line and power line connection with the help of Derrick and Chain Pulley arrangement by engaging skilled technician as per direction of EIC.

10 HP S/M P/M.

Lowering of Submersible pump Motor set along with 80 mm dia Column pipe part by part in the existing Tube Wells with an arrangement of Derrick and Chain Pulley arrangement, making Pipe line connection etc.all complete as per direction of EIC.(Pump Supplied Departmentally)

10 HP S/M P/M.

Carrying of 200 mm dia DI pipe( length 20 ft.) from Searsole Boosting Station to the Ballavpur Low Lift Pump House premises by using hired vehicle, this cost also include loading and unloading labour charges, as per direction.(Approx 13 KM)

Laying of 200 mm dia DI pipe after cutting concrete/earth and removing dedris near lighting kiosk towards Damodar river, then placed it in proper position, in between ends of concrete road, then filling gap by plain cenment concrete, surface finishing of road, So all RBTWs cable from Low lift run through this pipe so no chance of damaged all work should be done as per direction of EIC.

Laying of 3 Core X 10 Sqmm Al. Ar. Cable along the length of collecting line including fixing with supplied GI Wire at a suitable interval so as to prevent sagging of cable complete as per direction of EIC.(RBTW to upto river bank).

Laying of three cable of 3 Core X 10 Sqmm in an underground trench in single tier formation (horizontal) the trench size : 915 mm x 760 mm average depth with brick protection on the top of each cable with 8 nos. bricks per Mtr. and 4 nos. bricks per mtr. as separator between the cables including filling the space between the bricks and cables and also the trench with shifted soil, levelling up and restoring surface duly rammed.

Laying of one No. of 3 Core X 10 Sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

Making straight through joint between existing motor cable 1.5/2.5 Sqmm and 3 Core X 6 Sqmm submersible copper flat cable for extension of motor cable up to required lengh by supplying necessary seal kit to make joints leak proof all complete as per direction.

Making straight through joint of 3 core 10 mm2 Al Ar Cable with submersible flat cable by supplying Ferrul , rubber and other necessary materials to make the joint leak proof (with out kit).

Finishing the end of 3 core 10 sqmm XLPE armoured cables by crimping method incl. supplying and fixing solderless socket, tapes, anticorrosive paste & jointing materials.

Supply of following materials at site for panel repairing:-

0-600 Volt measuring range, moving coil analog type volt meter size 96 mm X 96 mm X 40 mm.(Make-AE, Model No-SMC-72)

0-40 Amp measuring range, moving coil analog type Ammeter size 96 mm X 96 mm X 40 mm.(Make-AE, Model No-SMC-72)

Lamp blocks with integraded RED LED lamps.(Make-ABB, Model No-MLBL-07R/YN)

150 Amp Star terminal.(Make-Kothari)

Jungle cutting, cleaning compound premises or shrubs, plants, jungles etc. by cutting and removingas directed.(Specific permission of Engineer in Charge prior to execution will be necessary)(To cleaning cable laying route)

Add. GST@18%

Add. Cess@1%

M/s. SOMA ENTERPRISE

EASTERN INDIA SALES AND SERVICE