ADDN ALTN TO BLDG NO P912 ETF AND P985 OF NAI AND PROVN OF HUME PIPE CULVERT AND APPROACH PATH TO BLDG NO P1252 AT NAVAL STATION KARANJA

Amount

Notes : - (i) (A) SO (K)/04/2025-26/LBW & (B) SO (K)/04/2025-26/LBW (E) Job No SO (K)/01/2025-26/MINOR WORKS (ii) Please refer schedule 'A' notes before quoting the tender. (iii) Amount of Schedule of Credit shall be deducted off line by the department.

COMMON ITEMS OF JOB (A) & JOB (B) (as per Appendix A to BOQ)

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 sqm on plan and not exceeding 1.5m depth in any type of soil etc complete all as specified and directed

Returning, filing in, excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm etc complete all as specified and directed

Removal of excavated soil not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting points etc complete all as specified and directed

M&L for rendering 15mm thick on fair faces of brick/concrete surfaces in cement mortar (1:4), finished even and smooth without using extra cement (WPC to be measured and paid separately) complete all as specfified and directed.

M&L for three coats of white wash on newly plastered surfaces of wall and ceilings including preparation of surface complete all as specfified and directed.

ITEMS FOR JOB 'A'

Demolition of pre-cast concrete block walling , built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings dressed stone work and pre cast concrete articles complete all as specified and directed.

M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150 mm bore of pipe with cement concrete 1:3:6 type D-2 using 40mm graded stone aggregate complete all as specified and directed.

M&L for reinforced concrete pipes, class NP-3, laid and jointed with collars of 150 mm bore of pipe complete all as specified and directed.

M&L for Pre-cast cement concrete Tyep B1 (1:2:4) using 20 mm graded stone aggregate block masonry with solid blocks, exc. 10 m in width and setting in CM 1:4 complete all as specified and diretced

M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished ,and reforming benching as required for 150 mm internal dia of pipe complete all as specified and directed.

Demolition of Cement concrete of any description and in any position complete all as specified and directed.

M&L for 40 mm thick PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in bedding layer for laying & fixing floor as in levelling course complete all as specified and directed.

M&L for 100mm thick cement concrete type B-2 1:2:4 using 40mm graded crushed stone aggregate as in path/floor finished even and smooth without using extra cement, laid in alternate panels of size not exc 4 sqm each including bitumen filling in joints complete all as specified and as directed.

M&L for glazed ceramic coloured tile 350x250x7 or 450x350x7mm size ( Desinger concept tiles matching with exisitng tiles) as in walls set and jointed in neat cement slurry over & including 10mm thick recuing in cement mortar (1:4) and pointed in coloured cement to match for work on vertical surface etc including dismentlling of old tile complete all as specified and as directed.

M&L non skid ceramic coloured tile 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 Square but not exceeding 0.18 Sqm in floor over & including 20mm thick screed bed in cement motar 1:4, set and jointed in neat cement slurry and pointed in coloured cement to match the tile including dismantling of old tile complete all as specified and as directed.

M&L non skid ceramic coloured tile 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.18 Square but not exceeding 0.36 Sqm in floor over & including 20mm thick screed bed in cement motar 1:4, set and jointed in neat cement slurry and pointed in coloured cement to match the tile including dismantling of old tile complete all as specified and as directed.

M&L non skid ceramic coloured tile 7 to 8mm thick (square/rectangular area of each tiles exceeding 0.18 Square but not exceeding 0.36 Sqm in skiting/dados set and jointed in neat cement slurry over and including 10mm thick rendering in cement mortar (1:4) and pointed in coloured cement to match for work on vertical surface etc including dismantling of old tile all as specified and as directed..

M&L for 2mm thick polymer natural / synthetic anti static flooring fire retardant compression moulding conductive flooring having electrical residence floor surface to earth between 50 kilo Ohms to 2.5 mega Ohms measured with wet electrode in accordance with details contained in STEC pamplet No 7, fixed over and including copper strips grid work using 50mm x 0.5mm thick forming 0.9sqm grid, joints of copper strips, brazed on the existing surface including cleaning & preparation of surface by passing with the suitable adhesive. The copper grid provided with diagonal earthing. The earthing resistance shall not exceed one ohm. The copper strip work shall be fixed to the existing floor at the 0.6m to 0.9m all as specified and as per manufacturer instructions including removing existing PVC flooring. complete all as specified and as directed.

M&L Chequered cement concrete tiles 300x300x25mm thick, set jointed and pointed in near cement slurry in floors with gray cement and pigments in any colour machine preassed glazed , over cement screed bed 20mm thick cement motor 1:4 including dismentling old tile all as specified and as directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) not exceeding 1.5 Square Metre each , removing from the site including cutting holes required for taking out existing hold fast etc. complete all as specified and as directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exceeding 1.5 sqm not exceeding 4.0 Square Metre each , removing from the site including cutting holes required for taking out existing hold fast etc. complete all as specified and as directed.

M&L for Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms and like incement mortar (1:4) including pointing in white cement (1:2) usingmarble dust with admixture of pigment to match with marble shade over & including 20mm thick screed bed or bedding layer of mortar in CM 1:6 complete all as specified and directed.

M&L for Granite 18 to 20mm thick on vertical surfaces such as skirting, dado, steps, wash basin table top, flooring, kitchen slab, machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing over and including rendering 20 mm thick back coat in CM (1:3) complete all as specified and directed

M& L for Providing edge moulding to 18-20mm thick marble stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and directed

M& L for Providing edge moulding to 18-20mm thick granite stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and directed

M&L for 40mm thick Cuddapah Stone slabs polished, set and jointed in cement and stone dust mortar 1:3 and pointed in cement mixed with approved pigment to match (used as support to granite/marble stone slab in Kitchen Platform) complete all as specified and directed

Taking down cement plaster on brick walls or stone walls etc including raking out joint, hacking for key, scrubbing down with water etc including removing debries to a distance max upto 500m complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces of walls in cement mortar 1:6 finished even and smooth (with out using extra cement) complete all as specified.

M&L for rendering 5 mm thick on ceilings in cement mortar 1:3 and finishing the surface even and smooth without using extra cement complete all as specified.

M&L for applying 1mm thick wall care putty on new or old plastered surface after preparation of smooth surface with sand paper and & M&L for applying two coats of oil bound distemper on walls complete all as specified and as directed.

Complete removal of existing treatment from old decorated plastered surfaces of walls by Vacuum based sanding machine, removal of nails etc & filling cracks/hole with putty, applying wall care putty upto 2 mm thick (multipurpose mixer shall be used for uniform and M&L for proper mixing of putty) and applying two coats oil emulsion distemper white or coloured over a coat of approved primer by auto roller complete all as specified & directed.

S&F for aluminium door/window/ventilator/partition, made out of extruded powder coated aluminium sections, with sliding or openable shutters including frame & necessary jointing cleats, glazing clips, powder coated aluminium snap beading,screws etc, complete and also including powder coated aluminium fittings such as stainless steel hinges, tower bolts, hooks & eyes, peg stays and handles, concealed star lock for aluminium window, Mortice lock vertical type size 100mm 04 lever for door, rubber beading suitable for fixing 4mm / 5mm thick glass in aluminium window/ doors including connected items,with and including making good to the disturbed portion complete all as specified and directed.

S&F 4mm thick sheet glass ordinary quality black glass colour, white,frosted or multicolour fixed in aluminium window/Door/Partition includin rubber beading in squarearea n exc 0.5 Sqm in each pane complete all as specified and as directed

S&F 4mm thick sheet glass ordinary quality black glass colour, white,frosted or multicolour fixed in aluminium window/Door/Partition includin rubber beading in square area exc 0.5 Sqm in each pane complete all as specified and as directed

S&F of 9mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination fixed with screws to timber frame work complete all as specified and directed

S&F for aluminium anodised grill of (design DG 104 pattern) made out of 10mm dia rod fixed with and including standard aluminium frame of F section of size 23.40mmx15.30mm & 1.4mm thick all as per manufactures instructions complete all as specified & directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made, complete all as specfified and directed.

S&F to existing door frames Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and as directed.. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple complete all as specfified and directed.

S&F Stainless steel butt hinges size 100 mm for fixing WPC/PVC Door Complete all as specified and as directed.

S&F 200 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed .

S&F 150 mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

Taking down and Refixing of GI tubing/CPVC 20 mm dia after cleaning of pipe with all fittings and fixed complete to walls and ceiling or laid on floors complete all as specfified and directed..

Taking down and Refixing of GI tubing/CPVC 25 mm dia after cleaning of pipe with all fittings and fixed complete to walls and ceiling or laid on floors complete all as specfified and directed..

S&F CPVC water tubing outer dia 20mm bore pipe, SDR 11 including provision of all fittings and connected completed in concealed and surface, along with primer & slovent cement for joint as per ASTM D 2564, pipe material shall be as per ASTM D 1785, fitting/ flanges shall be as per ASTM D2467, including taking down old Pipe complete all as specfified and directed.

S&F CPVC water tubing outer dia 25mm bore pipe, SDR 11 including provision of all fittings and connected completed in concealed and surface, along with primer & slovent cement for joint as per ASTM D 2564, pipe material shall be as per ASTM D 1785, fitting/ flanges shall be as per ASTM D2467, including taking down old Pipe complete all as specfified and directed.

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specfified and directed.

S&F PVC (SWR) floor trap plain with grating incl jointing with solvent cement 75mm bore complete all as specfified and directed.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, of size 580 mm x 440 mm white with integral foot rest complete including provn of cement concrete bedding and connection to trap, outgoing flushing pipe, anti syphonage pipe,CI trap 100 mm Bore of pipe etccomplete all as specfified and directed.

S&F in repairs white vitreous china wash down water closet pan (Pedestal pattern) with and including P or S trap, including plastic seat cover closed pattern, fixing bolt etc complete all as specified and directed.

S&F in repairs Vitreous China Half stall urinal White complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed

S&F in repairs to Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specfified and directed.

S&F in repairs to 15 mm bib cock two way with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe and fixed in repairs complete all as specfified and directed.

S&F in repairs PVC flushing cistern of 10 ltrs capacity including flush pipe PVC connection etc complete all as specified and directed.

S&F in repairs Vitreous china wash basin white , flat back size 550 X 400 mm including brackets including cutting for and pinning in ends of brackets or erecting stand including PTMT 32mm waste coupling and waste pipe complete all as specfified and directed.

S&F in repairs 15 mm bore Pillar tap cast copper alloy fancy type with capstan heads, chromium plated Fancy type screwed down high pressure with long screws shanks and nut complete all as specified and as directed.

S&F in repairs 15 mm bib taps cast copper alloy, screwed down high pressure chromium plated screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15 mmAngle valve stopcock cast copper alloy, screwed down high pressure chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs Tubular towel rail made of brass chromium plated , 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repairs brass chromium plated shower rose 125mm size including shower arm complete all as specifed and directed

S&F in repairs for 5.5 mm thick and 120mm wide sheet glass shelf assembly with chromium plated bracket guard and railing 500mm long complete all as specified and as directed.

S&F in repairs of soap dish fancy type chromium plated fixed in wall complete all as specified and as directed.

S&F in repairs 15mm bore Concealed stop cock or angle valve cast copper alloy ,chromium plated, fancy type, screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe complete all as specfified and directed.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as specfified and directed..

S&F in repairs PTMT waste pipe 31/32 mm bore 80 cm long complete all as specfified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid on wall or in trenches or in floors complete all as specfified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid on wall or in trenches or in floors complete all as specfified and directed.

S&F PVC (SWR) bends ISI marked any radius of 110 mm bore complete all as specified and directed. M

S&F PVC (SWR) bends ISI marked any radius of 75 mm bore complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe with access door complete all as specified and directed.

Taking down carefully copper /aluminium point wiring (light, fan socket or power) through stove enamelled steel conduit/pvc conduits including complete fittings such as switches, ceiling roses, pendants, regulators, sockets,, switch sockets, electrical fittings etc removing and making good disturbed surfaces of walls/ceiling etc, complete all as specified and as directed.

M&L fort concealed point wiring with 1.5 Sqmm single core, multi stranded copper conductor 1100 V grade, ISI marked , PVC insulated unsheathed cable (with approved colour code) FRLSH cable in CONCEALED PVC , ISI marked including all accessories, with PVC 1.5 mm multi stranded insulated unsheathed FRLSH copper wire, of green colour for continous earth, with & including sunken box made out of suitable thick and not less than 60 mm in depth GI/MS/ pressed steel terminal box to be concealed in wall, duly painted including laminated hylum/maonite sheet cover thickness 3mm for mounting of fittings like switches, sockets, fan regulators etc. fixed with galvanised screw and cup washer of the following complete all as specified and directed. Note : Wiring to be done as per approved colour code.

One light /fan/ call bell point controlled by one switch

One 5 pin socket outlet 5 Amps on independent board

One 5 pin socket outlet 5 Amps on same board

All as per BOQ Serial item No item No 2.68 above but with 2.5 sqmm multi stranded copper conductor 1100 volts grade FRLSH PVC insulated sheathed cable with FRLSH PVC 2.5 Sqmm multi standard insulated unsheathed copper wire for continues earth on independent board.

S&F ceiling rose PVC/polycarbonate, isolated body surface Bakelite 65mm dia three terminals complete all as specified and directed.

S&F in modular step type fan regulator 120 watt ,AC, 220V, 50hz complete all as specified and as directed.

S&F in modular switch 1 module 6 amp one way ISI marked complete all specified and directed.

S&F in modular switch 1 module 16 amp one way complete all specified and directed.

S&F in modular socket 2 module universal type 5/6 amp one way complete all specified and directed.

S&F in modular socket 2 module universal type 6/16 amp one way complete all specified and directed.

S&F in modular bell push 6A 1 module complete all as specified and directed

S&F in repairs Bell buzzer, ding dong AC,230V, 50hz single pole complete all as specified and directed

S&F in repairs modular cover plates with frame up From 1 /2 to 3 module as per site requirements complete all as specified and as directed.

S&F in repairs modular cover plates with frame up from 4 to 12 module as per site requirements complete all as specified and as directed.

S&F in repairs modular metal flush box from 1/2 to 3 modules complete all as specified and directed.

S&F in repairs modular metal flush box as per site requirements from 4 to 12 modules complete all as specified and directed.

M&L for Sub main wiring with two runs of single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor FRLSH cable of 6.0 Sqmm (with colour code), drawn in andt including non metallic rigid PVC conduit of 25mm dia/casing capping/suitable size, including one run of PVC insulated unsheathed, multistranded copper conductor FRLSH cable of 6.0 Sqmm (Green colour) as contineous earth conductor cable connected to earth dolly in surface/ recess complete including taking down complete all as specified and as directed.

M&L for Sub main wiring with FOUR runs of single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor FRLSH cable of 10.0 Sqmm (with colour code), drawn in and including non metallic rigid PVC conduit of 32mm dia/casing capping/suitable size, including one run of PVC insulated unsheathed, multistranded copper conductor FRLSH cable of 10.0 Sqmm (Green colour) as contineous earth conductor cable connected to earth dolly in surface/ recess complete including taking down complete all as specified and as directed.

S&F LED building security light fitting with suitable size bracket/angle with three core flexible wire to fit security light of 45 w IP 66 protection LED including taking down complete all specified and directed.

S&F LED batten with 20/22W LED tube light approx four feet in wall/surface connecting with all required accessories like PVC box base,flexible cable from ceiling rose etc Surface and wall mounted LED batten, Engineering plastic batten with accessories including taking down complete all as directed and specified.

S&F double door MCB DB made out of 18SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts, 100 Amps rated bus bar 12 way, double door open able, concealed on wall including taking out old unsv MCB DB any size/type complete all as specified and as directed..

S&F double door MCB VTPN DB, 4 WAY made out of 18SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP, 240 volts, 100 Amps rated bus bar , concealed on wall ,including taking out old unsv MCB DB any size/type complete all as specified and as directed..

S&F in repairs 6 to 32 AMP MCB single pole 240 V 10 KA (C-Series) complete all as specified and directed.

S&F in repairs SPN 32 AMP MCB DP 240 V 10 KA (C-Series) complete all as specified and directed.

S&F in repairs LED recess/surface mounted 2x2 luminarie 36w fitting, 220 V, AC,50HZ suitable surge protection, high power factror,driver etc complete including flexible wire and connected accessories complete all as specified and as directed.

S&F in repairs LED batten 10w, 2 feet with LED tube light 220V,AC,50HZ in wall/surface connecting with all required accessories like flexible cable from ceiling rose etc complete all as specified and as directed.

S&F in repairs MCCB 4 pole, thermal magnetic release range 100 Amps of breaking capacity 16 kA, 415 Volts, 50 Hz, complete all as specified and as directed.

M&L for earthing complete with GI earth plate electrode of size 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below the normal ground level connected with GI strip 32 x 6 mm by means of bolts, nuts, check nuts & washers of galvanished iron steel including necessary excavation and earth work in any type of soil, removing surplus soil to a distance not exc 50 m, with and including PCC chamber in PCC (1:2:4) , type B1, using (20 mm graded stone aggregate), mild steel angle iron frame made out of MS angle iron of size 40x40x6 mm thick duly painted with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer hinged with and including 6mm thick CI cover with handle, watering arrangement with funnel internally secured with wire mesh with 20 mm dia medium grade pipe for watering ,40 mm dia light grade GI pipe for lead protection in & including alternate layers of charcoal dust and common salt complete all as shown in electrical plate No 3 of SSR Part-1(2009) connected to earthing test point all as specified and indicated including testing on completion NOTE: (i) The earth chamber shall be constructed 0.50m away from the edge of earth pit and the cost of the same is deemed to be included in quoted unit rate. (ii) GI Strip and protection pipe upto 7.5m is deemed to be included in the quoted unit rate. (iii) GI watering pipe upto 1.2m s deemed to be included in the quoted unit rate.

S&FGI strip of 32x6mm on wall/surface for conductors or as earth continuity conductor including taking down existing strip any type complete all as specified and as directed.

ITEMS FOR JOB 'B'

Demolition of stone/brick masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings dressed stone work and pre cast concrete articles complete all as specified and directed.

Excavating over areas, n exc 1.5 m deep and getting out in hard dense soil complete all as specified and directed

Excavating over areas, exc 1.5 m deep but n exc 3 m and getting out in hard dense soil complete all as specified and directed

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 sqm on plan and not exceeding 1.5m depth in soft/disintegrated rock etc complete all as specified and directed

Removal of excavated Rock not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting points etc complete all as specified and directed

M&L for cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation complete all as specified and as directed

M&L for cement concrete type B-2, 1:2:4 using 20mm graded stone aggregate as in base for Hume Pipe complete all as specified and as directed

Supply & laying 1000mm dia NP2 Class R.C.C. Hume pipes with Collar joints conforming to IS 458:2003 and laid on approved bedding as per IS 783:1985 (reaff. 2010) including jointing the pipes and filleting with hemp and stiff mix of cement mortar 1:2, etc. complete as specified & as directed .

M&L for formwork to sides of concrete foundations, footings, columns, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter with rough finished surface

M&L for REINFORCED CEMENT CONCRETE WORK(Design Mix) Type M-30 as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified and directed

M&L for REINFORCED CEMENT CONCRETE WORK(Design Mix) Type M-30 as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed

M&L for formwork to Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter rough finised complete all as specified and directed

M&L fo Mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending etc and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips, complete all as specified and directed

M&L fo Mild steel TMT bars 5 to 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending etc and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips, complete all as specified and directed

M&L for pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width in type B1 (1:2:4) and setting in mortar (1:6) complete all as specified and as directed

M&L for walling of random rubble, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar 1:6 all as specified and directed.

All as per BOQ Serial item No 3.16 above but except stone. Note:- stone obtained from BOQ Serial item No 3.01 above shall be reused.

M&L for raised pointing to random or polygonal rubble masonry uncoursed or brought upto course in CM (1:4) complete all as specified and directed.

Supply only liquid water proofing compound mix cement concrete/cement plaster as per manufacture instruction complete all as specfied and directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specfied and directed.

Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5m high from base complete all as specfied and directed.

Rolling and consolidation of formation surfaces in cutting and filling with power roller excedding 8 tonnes but not excedding 12 tonnes including watering consolidating to required level ,gradient camber etc complete all as specfied and directed.

M&L for Soling (or sub base) 150 mm thick with 63 to 75mm graged aggregate quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber complete all as specfied and directed.

M&L for WBM 100mm thick (compacted thickness), with coarse aggregates of grading 1 (90 to 40mm size), spread, rolled and consolidated to gradient and camber required i with granite, trap stones etc complete all as specfied and directed.

M&L for hard core of broken stone of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface Complete all as specified and directed

M&L for Sand filling under floor/pavement or in foundation including watering and consolidation complete all as specified and directed

M&L for machine pressed precast concrete inter locking paver block (Reflective type)in any shape and size confirming to IS-15658-2006 of 80 mm thickness M-40 grade with grey cement and pigment complete all as specified and directed

M&L for precast cement concrete in type B-1, 1:2:4 (20 mm graded aggregate) as in Kerb stone including weathering,slightly rounded or chamfered angles including form work fixed in cement mortar 1:4.(Size of kerb stone complete all as specified and directed

M&L for Providing, cement concrete of 1:2:4 type B0 (12.5mm graded aggregate ) in lintels upto 1.5m clearspan, cills, steps; seismicand other similar bands,plinth courses, string courses,lacing courses, parapets andrailings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs not provided for in Item 04028, water troughs and the like includingweathering, slightly rounded or chamfered angles and throating, complete all as specified and directed

M.K Enterprises (BID ID -3430040)

Pheonix Engineers & Contractors (BID ID -3433136)

Mahadev Enterprises (BID ID -3430028)

pk Enterprises (BID ID -3429413)