PROVN OF SQUASH COURT AND ASSOCIATED INFRASTRUCTRE AT AF STN ARJANGARH UNDER GE AF GURGAON

Amount

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/Disintegrtated rock complete all as specified.

Excavating in trenches, n exc 1.5 m wide and exc 1.5 m in depth but n.exc 3.00 m; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/Disintegrtated rock complete all as specified.

M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling & mass concrete, sub base complete all as specified.

M&L for providing reinforced cement concrete (M-25) Design Mix using 20 mm graded stone aggregates as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified.

M&L for providing reinforced cement concrete (M-25) Design Mix using 20 mm graded stone aggregates as in Columns, pillars, piers, posts and struts complete all as specified.

M&L for providing reinforced cement concrete (M-25) Design Mix using 20 mm graded stone aggregates as in Slabs supported on walls,beams and columns in floors,roofs, complete all as specified.

M&L for providing reinforced cement concrete (M-25) Design Mix using 20 mm graded stone aggregates as in Beams, cantilevers, bressummers, lintel over 1.5 span complete all as specified.

M&L for providing reinforced cement concrete (M-25) Design Mix using 20 mm graded stone aggregates as in Chajjas complete all as specified.

M&L reinforced cement concrete M 20 type B1 1:2:4 (20mm graded agg ) Chullah hoods; stairways (except spiral staircases) including steps (square or spandril), string pieces, carriages, etc., complete, any section straight or winding, but excluding landings; RCC water tanks upto 1500 litres etc complete all as spd and directed.

Use of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter (rough finished surface) complete all as specified.

Use of formwork to sides of pillars,posts, struts, piers, columns and stanchions (square/rectangular/polygonal) rough finished surface complete all as specified.

Use of formwork to sides of pillars,posts, struts, piers, columns and stanchions (circular) fair finished surface complete all as specified.

Use of formwork to soffits of suspended slabs such as roof slabs, floorslabs, landings and similar work not exceeding 200 mm thick rough finished in flat surface complete all as specified.

Use of formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers,lintels, cantilevers, shelvesincluding supports,overhangs,etc. also splays between floors in rough finished flat surfaces and etc complete all as specified.

Use of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete rail ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizon tal or sloping and similar work exc 10cm but n exc 20cm wide (rough finished surface) complete all as specified.

Formwork to,rough finished surfaces of flat concrete, staircases with sloping or stepped soffits including risers and stringers including landings,etc complete all as spd and directed.

M&L for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified.

All as per item No. 17 above but 5 mm dia & over upto & including 10 mm dia in stirrups,spacers and binders, complete all as specified.

M & L modular bricks in cement mortar 1:6 with Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in etc complete all as spd and directed.

M&L for rendering 15 mm thick in cement mortar (1:6) on brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified.

M&L for 15 mm thick plastering in two layers (10+5) mm in cement mortar (1:4) on brick or concrete surfaces including rendering on fins, fascias, chajja, parapets etc and finishing the surfaces even and fair (without using extra cement), top layer shall be with WPC as per manufacturer's instruction and complete all as specified. Note: WPC shall be measured and paid separately.

M&L rendering 10mm thick in cement mortar (1:3) as in ceilings finished even and smooth (without using extra cement) complete all as specified.

Preparation of new plastered wall surface and applying two coats of synthetic enamel paint over priming paint plaster coat complete all as specified and directed by Engineer-In-Charge.

M & L for Painting lines, dashes, arrows, letters, on wall surfaces and the like n exc 10cm wide with road marking paint, white or golden yellow etc completed all as spd and directed.

M&L for preparation of newly plastered or unplastered/undecorated surface of wall and applying (a) 2 coats of damp proofing chemical of approved make i.e Asian or equivalent to achieve moisture resistance surfac. (b) Two coats of luxary emulsion paint with one coat of primer over a coat of wall putty complete all as specified.

M&L for preparation of newly plastered or unplastered/undecorated surface of ceiling and applying two coats of oil bound distemper over one coat of primer complete all as specified

M&L Preparing of new surface of wall and applying two coats of exterior emulsion paint over a coat primer on walls complete all as specified and directed by Engineer-in-charge. complete all as specified and as directed by Engineer-in-Charge .

Supply only intergral water proofing compound ISI Marked complete all as specified.

M&L for Hardcore (broken stone or boulders) of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete.

M&L for 75 mm thick cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregates) as in sub base of flooing etc complete all as specified.

M&L for cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregates) 100 mm thick as in flooring etc and finishing the sureface even and smooth using extra cement ,complete all as specified.

M&L for screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:4) for bedding of tiles complete all as specified.

M&L 10 mm thick rendering in cement mortar (1:3) on vertical surfaces for backing of tiles/granite etc complete all as specified.

M & L for Granite (of any type) 18-20mm thick machine cut as in flooring , steps , bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polish etc completed all as specified.

M & L for 20mm thick Granite (of any type) tiles machine cut, in skirting/dado,riser of stps laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing etc completed all as specified.

S & F for Anodised aluminium snap grid frame work for false ceiling all as specified, etc complete, as specified and directed.

S & F for Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, etc complete, as specified and directed.

M & L for 12 mm thick, Perforated particle board/tiles for insula-tion and accoustic purposes,60x60 cm in size, fixed with nails to timber framework or with staples on snap grid, etc completed all as specified.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft/disintegrated rock. Complete all as specified

M&L 100 mm thick PCC 1:4:8 tybe D-2 using 40mm stone aggregate as in subbase. Complete all as specified

M&L for providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding/laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling joints with sand andcutting of paver block as per required size and pattern, finishing and sweeping extra sand. Complete all as specified

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregates) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick with soft/loose soil etc complete all as specified.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified.

M&L for Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified.

M&L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified.

M&L for 15 mm thick plaster in cement mortar (1:4) mixed with water proofing compound on roof slabs finished even and smooth without using extra cement complete all as specified. Notes : WPC shall be measured and paid seperately.

M&L for water proofing treatment with APP (Atactic Polypropylene) modified polymeric prefabricated five layer membrane over roof consisting of cleaning of concrete or plaster surface of roof & parapet walls and applying evenly a bitumen primer confirming to IS 3488 @ 0.40 Kg per sqm laid using buten torch and sealing all joints of APP modified polymeric water proofing membrane minimum weight 3.6 kg/sqm reinforced with non woven polyester fabric (weight not less than 160 grams per sqm) unrolled and bonded to substrata with logitudinal and end laps 100 mm and 150 mm respectively as per manufacturer's instructions incl two coats of water proofing paint with aluminium finish on top complete all as specified.

M&L for providing for stainless steel angle with diffuser glazing window including all fitting etc with laminated toughened glass fitted with stainless steel spider fittings (2way/4way) splice plate, fin plate routel and stainless steel fastener etc with 12 mm thick glass support finish complete all as specified and as directed.

M&L for providing for frameless glazing door including all fitting of shutter i.e handle, lock hinges etc with laminated toughened glass fitted with stainless steel spider fittings (2way/4way) splice plate, fin plate routel and stainless steel fastener etc with 12 mm thick glass support finish complete all as specified and as directed.

M & L for providing for 18/19 mm thick frameless fixed toughened glass , fixed at top and bottom including all fittings of stainless steel, stainless steel fastener etc , complete all as specified and as directed.

S & F for Powder Coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing, etc complete, as specified and directed.

S & F for Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, etc complete, as specified and directed.

1. M&L for Maple wooden flooring for squash court using 20-21 mm thick hard wood flooring fixed over frame of wooden runner (European fir/spruce/pine wood) of size 70 mm X 45 mm throughout the length fixed on the botttom side with 18 mm thick EPDM air coushioning pads by nails through the two wings at 350 m c/c. A 6 mm thik polyethylene fils as vapour barrier will be placed on the leveled Concretre sub-floor before laying the under frame. The runners having air cell cushioning pads will be placed on the vapour barrier in perfect level at 350 mm c/c in one direction. The surface boards will be screwed to the runners through the tongue only and will lock the screwed tongue by the groove of the adjoining boards. The ends of the boards will be locked by inserting the wooden fingers through the edge grooves and fixed with suitable adhesive of brand Pidilite Fevicol SH or equivalent. An expansion gap of 10 to 15 mm will be left open between the wooden flooring and the surrounding tiled area/wall. 2. After construction of the floor will be machine sanded in uniform level and finished with non-skid IMPORTED water based lacquer. Game line marking will be carried out in required colors before applying the finish coat. Specifications of wooden flooring is as follows:- (i) Moisture Content % - 7-12% (ii) Density Kg/Cum - 670-700 (iii) Specific gravity - 0.56-0.63 (iv) Relative Hardness - 1450 min (v) Compressive strength (in psi) - (a) Parallel to grain - 4020-7830 (b) Perpendicular to grain - 640-1479 (vi) Shear Strength (in psi) (a) Parallel to grain - 1460-2330

E/M SCHEDULE

S & F sub main wiring for circuit of size 2.5 sq mm 2 core (FRLS) alongwith earth wire of 2.5 sq mm single core of FRLS PVC insulated unsheathed cable, 1100 volts grade with multistranded copper conductor including PVC conduit (conealed wiring) of suitable size complete all as specified and directed by Engr-in-Charge. (For light/fan/5 Amps socket point)

S & F sub main wiring for circuit of size 4.0 sq mm 2 core (FRLS) alongwith earth wire of 4.0 sq mm single core of FRLS PVC insulated unsheathed cable, 1100 volts grade with multistranded copper conductor including PVC conduit (conealed wiring) of suitable size complete all as specified and directed by Engr-in-Charge. (For 15 Amps and AC Point)

S & F sub main wiring for circuit of size 6 sq mm 2 core (FRLS) alongwith earth wire of 6 sq mm single core of FRLS PVC insulated unsheathed cable, 1100 volts grade with multistranded copper conductor including PVC conduit (conealed wiring) of suitable size complete all as specified and directed by Engr-in-Charge. (FOR SPN DB's )

Supply and fixing TPN DB's 8 way vertical type 415 V, factory made IP 43 protection class metal double door with 200 Amps rating Bus Bar 240/230 Volts, Neutal link, earth bar and Din Rail, provn for fixing of 01 No MCCB 100 Amps as incomer and fixing of MCB/iSOLATOR/RCCB etc complete all as specified and directed by Engr-in-charge

Supply and fixing MCCB 100 Amps, 3 Pole, 16 KA, fixed type, suitable to be fixed in 4 way TPN DB complete all as specified and directed.

S & F MCB DB double door SPN 12 Way, 240/230 Volts with 200 Amps rated copper bus bar complete all as specified and directed.

S & F MCB SP 6-32 Amps, 10 KA, 'B' Series complete all as specified and directed by Engr-in-charge

S & F MCB SPN 40 Amps, 10 KA, 'B' Series (for SPN DB 12 way) complete all as specified and directed by Engr-in-charge

Supply and fix single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fix heavy duty single phase, steel body exhaust fan 450 mm sweep, 900 RPM complete with shutter and louvers and exhaust fan shall be fixed with suitable size of buzzer bolt/hold fastener as approved by Engr-in-charge complete all as specified and directed.

Supply and fixing wall fan 400 mm sweep, 240 Volts, AC, 3 speed, metal blades for high air thurst and metal body heavy duty complete with suitable clamps for wall mounting complete all as specified and directed. Make : Almonard/Compton/Bajaj

Supply and fixing LED bldg security light fitting 35 watts 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including suitable size of GI bracket for mouting of security light to be bend as required shape, pipe bracket shall not be less than 1.2 Mtr length and suitable size 02 Nos MS clamps and nuts and bolts.

S&F socket outlet 6A-2/3 Pin combined 2 module modular type complete all as specified and directed.

S&F socket outlet 6A/16A-2/3 pin combined 2 module modular type complete all as specified and directed.

S&F switch 6 amps modular type one one way complete all as directed.

S&F switch 16 amps modular type one one way complete all as directed.

S&F metal flush box 3 module all as specified and directed.

S&F metal flush box 6 module all as specified and directed.

S&F metal flush box 8 module all as specified and directed.

S&F for white cover plate with frame, 3 module all as specified and directed.

S&F for white cover plate with frame, 6 module all as specified and directed.

S&F for white cover plate with frame, 8 module all as specified and directed.

Supply and fix ceiling rose three terminal all as specified and directed.

M&L for earthing to switch gear/MCB DB with mild steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) connected to galvanised earth lead wire 4.0 mm dia by means of galvanised iron nuts, bolts and washer, earth lead connected to eqpt as directed, earth plate surrounded with adequate quantity of charcoal dust mixed with common salt to a packed thickness of 15 cm all around the plate including necessary earth work, PCC chamber and reinforced PCC cover made by PCC 1:3:6 type C-1 as in pit chamber and RCC pit cover 50 mm thick precast RCC 1:2:4 type B-1 duly reinforced with 6mm dia MS bar at 150mm c/c both ways with 10 mm dia MS round bar as handle, 20 mm bore GI pipe medium grade for watering and 15 mm dia GI pipe light grade for protection of earth lead up to 7.5 mtr with funnel, wire mesh etc with and including testing complete all as specified and as shown in electrical plate No 3 of MES sch Part I. (for TPN DB)

Earthing continuity conductor or main earthing lead of size 4 mm dia galvanised iron or steel wire, fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed or any other indicated situation for loop earthing etc complete all as specified andd directed.

Supplying, laying, testing and connecting in repair GI Tubes, 40 mm dia bore medium grade with all fitting laid in trenches, floor or under road crossing complete all as specified and directed.

Supplying, laying, testing and connecting in repair GI Tubes, 25 mm dia bore medium grade with all fitting laid in trenches, floor or under road crossing complete all as specified and directed. Make Shall Jindal/TATA

Supply and fix gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete of size 25mm

M&L for cutting existing water pipe 100mm dia CI/DI/GI and inserting "T" 100 x 100 x 40 mm by means of MS clamps or threading of exsiting both ends or by means of lead wool joint complete all as specified and directed by Engr-in-Charge.

Excavation of soft/loose soil in trenches not exc 1.5 meter wide & not exc 1.5 mtr in depth: for foundationetc or for manholes, laying of pipe in any type of soil and getting out complete all as specified

Returning, filling in excavated approved soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Supply, laying and testing cable XLPE insulated, screned, PVC bedded galvanized steel strip or wire amoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 70 sq mm 3.5 core (from existing panel to proposed bldg TPN DB 8 WAY)

M & L for Earthing to OH/Sub stn with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to main earth lead GI wire 4 mm dia by means of bolts, nut, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.5 of MES Schedule pt-I 1991, GI earth lead wire protected by GI pipe 15mm dia light grade and connected to earth test point including excavation in any type of soil,returning filling, disposal of soil, providing charcoal dust and common salt upto top edge of earth plate, construction of PCC pit with RCC cover, funnel, watering pipe of 20mm dia GI light grade and provision of earth test point including testing on completion complete Note : Main earth lead beyond 7.5 meter including protection pipe of suitable size shall measured and paid saperatly.

Supply and fixing steel tubular pole, swaged, complete with cast iron base plate, finial taper plug, bolts, nuts, washer and screws including painting with two coats of aluminium paint over one coat of red oxide primer on all exposed surfaces and tarring with black bituminous paints to portion embedded in PCC including numbering of poles with two coats of synthetic enamel paints, type 410-SP-31 (9 meter long) complete all as specified and directed by Engr-in-charge

Supply, laying and testing cable XLPE insulated, screned, PVC bedded galvanized steel strip or wire amoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 sq mm 4 core (for street lights poles) Note for item No. 3&4. 1. The rate quoted by the contractor deemed to be inclusive of suitable size aluminium lugs at any required length at both ends of cable. 2. Suitable size of cable chromium plated stainless steel grands etc.

Cutting existing road surfaces or hard standing 0.45 mtr depth and 0.3 mtr width (22 CM thick comprising bituminous topping) for laying of pipes/cables and making good to the disturbed surfaces to match with existing complete all as specified and directed. Note : Rate quoted by the contractor deemed to be inclusive of PCC 1:2:4 to be required to making good the disturbed surface to match with existing.

M & L for GI tubing (light grade) with all necessary fitting laid in trenches/under road crossing, or fixed on poles/walls/under floor etc complete all as specified and as directed for the following sizes:-

a) 40 mm dia bore

b) 50 mm dia bore

M & L for Horizontal drilling hole at a depth upto 1 mtr below the normal ground level of suitable size to insert pipe upto 40-100 mm dia across the road across the horizontal position at different location complete all as specified and as directed.

M & L for dry sand cushioning to underground cables with 8cm thick before laying of cables and 15cm thick after laying and stretching of cable all as specified and directed .

M & L for Old size sub class ‘B’ bricks, laid in trenches as cable covers complete all as specified and directed.

S & F pole box for street light dust and vermin proof with hinged door and locking arrangement make Sintex model GSJB 3020 complete with 4 way connector 2 Nos. of capacity 60 amps incl one MCB SP C series 06 amps 10 KA capacity for Security light connection with flexIble wire 3 core 2.5 sqmm with suitable size of PVC conduit and including suitable clamps & suitable size brass chrome plated glands-02 nos at bottom for cable entry and exit complete all as specified and as directed. Make shall be : Sintex/National/BCH.

M&L Cross-arms, Bracings, Supports, Clamps and Back Plates fabricated from Structural Steel Sections including Nuts, Bolts, Washer, welding, bending cold or hot, drilling holes for Bolts, in any shape or size as indicated/ directed and inclusive of one coat of Aluminium Primer one Under Coat and One Finishing Coat of Aluminium Paint, complete all as specified and as directed. (for loop boxes and fixing of GI pipe with pole)

Supply and fixing LED street light fitting 70 watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrision resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Suuply and fixing street light brackets made out of GI tubing light grade, 40 mm bore 1200 mm long bent to shape at 120 degree, fixed on pole by providing MS clamp made up to flat iron 50 x 6 mm including nuts and washer of suitable size, complete.

Material and labour for cement concrete in foundations, filling and mass concrete Type D2 1:4:8 (40 mm graded aggregate) incl form work complete all as specified and directed.

Material and labour for coping to poles with PCC Type B1, 1:2:4 (20mm graded aggregate incl form work complete all as specified and directed.

Goyal Enterprises (BID ID -3342672)

sumit associates (BID ID -3341785)

Parveen Builders (BID ID -3341414)