Construction work of road and interlocking work on both sides from Shiv Mandir to house no. B-312 In ward no. 09 Patel Nagar II

Scraping of old panted surface including disposal of all scraped material to a distance of 30meters as directed by the Engineer-in-charge as per UPPWD SOR-2023 s.i.No.772.

Construction Of Granular Sub Base By Providing well Graded Material Spreading In Uniform Layers With Tractor mount Grader On Prepared Surface, Mixing by Mix In Place Method Tractor With Rotavator at OMC, and Compacting With Three wheel 80-100 KN Static Roller To Achieve The Desire Density, Complete as per Clause 401. As per MORD Analysis.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with Three wheel 80-100 KN Static Roller in stages to proper grade and camber, applying and brooming,requisite type of screening/binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density as per Clause 404.

Providing and applying of Primer coat with Bituminous emulsion (SS-1) on prepared surface base including cleaning of road surface and spraying primer at the rate of 0.70 Kg/ sqm using mechanical means as per Technical specification Clause 502.

Providing and applying of tack coat t with Bituminous emulsion (RS-1) on prepared bituminous surface cleanined with hydrolic broom using emulsion pressure distributor at the rate of 0.25 Kg/ sqm using mechanical means as per Technical specification Clause 503.

Providing and laying bituminous Macadam (Grading-2) with higher capacity hot mix plant using crushed aggregatesof specified grading premixed with bituminous binder (VG-30) @ 3.40percent of mix and filler transporte site ,laid over a previously prepared surface with paver finisher to the required grade ,level and alignment , and rolles as per clause 501.6 and 501.7 to achieve the desired compaction as per MoRTH specification No 504 complete in all respect Adjustment for bitumen shall be done as per job mix formula and E-in -C letter No2651 Dt 27-07-12 for proper completion of work as per direction of engineer -in- charge including all labour T&P, taxes , labour cess etc. complete.

Providing and laying bituminous concrete(Grading-2) with hot mix plant using crushed aggregates from approved quarry of specified grading premixed with bituminous binder (VG-30) @ 5.40 per cent of mix and filler transporting the hot mix to work site ,laying with bituminous a hydrostatic paver finishing to the required grade , level and alignment , rolling with smooth wheeled , vibratory and tanden rollers to achieve the desired compaction (ref to Mort&H Specification No 509)Adjustment for bitumen shall be done as per job mix formula and E-in -C letter No 2651 Dt 27-07-12 for proper completion of work as per direction of engineer -in- charge including all labour T&P, taxes ,labour cess etc complete.

Providing and laying of hot applied thermo plastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per square area thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC :35 .the finished surface to be leved uniformand free from streaks and holes Rates are inclusive of all taxes royality etc all T&P / machines material and labour equrired for proper completion of work. SI No. 19.01 new Item.

Brick Eding on both side of the Road of M-150 Bbricks 7 cm wide. 11 cm deep laid with Mud Mortar including labour & supply of bricks finished to the required Template and in proper alignment and also including dressing and Ramming the excavated earth as directed by the Engineer- in-charge as per UPPWD SOR-2022 S.I.No.765

M-150 Brick work with 1:4 cement &coarse sand mortor in foundation and plingth including supply of all material, labour t&p etc . required for proper completion of work . as per UP.P.W.D.SOR-2022 S.I. No-305 (a).

12 mm thick plaster over wall of 1:4 cement & coarse sand mortar including supply of all materials, labour and t&p etc. as per UP.P.W.D.SOR-2022 S.I.No. 584.New item.

P/Laying of cement concrete with 20 mm gauge stone ballast, coarse sand & cement in the proportion of 1:1.5:3 including supply of all materials, labour. Tools& plants etc. required for proper completion of work. As per UP.P.W.D.SOR-2022 S.I.No. 279(b).

Supply and laying of Grey Colour Precast cement concrete I-shaped interlocking Paver blocks ISI Marks confirming to S 15658-2000 with top layer of minimum 8 mm thickness having Plan dimensions 200 (160+120) mm of O.P.Cement smooth high gloss finish skid resistant manufactured from rubber moulds through vibro compression mechanism. The compressive strenght of Paver shall not be less than 30Mpa(M-30) and weight 5 Kg per No. and including cost of materials with a blanket layer of 4 cm thik fine sand layer materials,labour and T&P etc required for proper completion of work as directed by the Engineer -in-charge. Rate approved by S.E.R.E.D.Meerut.

Supply and laying of Precast cement concrete 80 mm thick Rubbar Moulded Red/Yellow colour I-shaped interlocking Paver blocks ISI Marks confirming to S 15658-2000 with top layer of minimum 8 mm thickness having Plan dimensions 200 (160+120) mm of O.P.Cement smooth high gloss finish skid resistant manufactured from rubber moulds through vibro compression mechanism. The compressive strenght of Paver shall not be less than 30Mpa(M-30) and weight 5 Kg per No. and including cost of materials with a blanket layer of 4 cm thik fine sand layer materials,labour and T&P etc required for proper completion of work as directed by the Engineer -in-charge. Rate approved by S.E.R.E.D.Meerut.

R.C.C. work with cement, coarse sand and 20 mm gauge approved stone grite in proportion of 1:1.5:3 in R.C.C. columns excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 .W.G.G.I binding wire and centering and shuttering and supply of all materials and labour and T&P etc. as per UP.P.W.D.SOR-2022 S.I.No.284 New Item.

M.S. ( Tor steel or plain) in plain work such as R.C.C. Work Iincluding cutting bending to proper shape complete including supply of all materials, labour T&P etc. required for proper completion of work As per UP.P.W.D.SOR-2022 S.I.No.504.

Supply and fixing of M.S sign board.of prescribed size 1.20m *2.75 m with angle 40*40*6 mm iron angle and 1 mm thick ms iron sheet including painting and letter writing complete.approved rate as per S.E.R.E.D. Meerut.

Deduction-5% for Competitive Price Efficiency

Add GST 18% Rs