SPECIAL REPAIR TO BUILDING NO P56 AT AF STATION GWALIOR AND PROVISION OF CERTAIN BR WORKS IN LIVING IN AREA AT AF STATION GWALIOR

Amount

Demolition of old PCC in ground floor & pavings (including floor tile ) n.exc 15 cm thickness below or above GL, including removing excavated material n exc 2.5 KM distance and depositing where as directed, complete all as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding & removing serviceable material to store and rubbish off the premises complete all as directed.

M&L for premium quality non skid coloured ceramic floor tiles 7- 8 mm thick (square/ rectangular) area of each tiles exc. 0.06 sqm but not exc. 0.11 sqm, in floors etc set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed in Cement Mortar (1:6 ) complete all as specified .

M&L for premium quality glazed ceramic tiles 450x300 x 6-7mm thick coloured on vertical surfaces such as skirting/dados etc, set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 10 mm thick in Cement Mortar 1:4 on wall complete all as specified .

M&L for 25 mm thick PCC 1:2:4 mix, type B0 (using 12.50 mm graded stone agg) as in sub base of floor finishing the surface even and rough to receive tiles etc complete all as specified.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar and removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for granite of 18mm to 20mm thick (of any type) work (table rubbed/moulding and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20mm screed bed in Cement Mortar 1:4 all as specified.

M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed. Note:- The size of kota stone slab not less than 550mmx550mm (cut size except the location where balanced.)

Grading existing kota stone flooring/skirting with stones and washing down with water and finally polishing to surface to entire satisfaction of GE.

S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest and 'S' or 'P' traps(cast iron 100mm bore) (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc complete all as specified in SSR and complete all as specified.

Supply and fix in repairs of PVC flushing cistern 10 ltr capacity valve less symphonic action type low level with and incl ball valve float & handle, waste pipe & fixing accessories to wall complete all as specified.

S&F in repair vitreous china counter top clair wash hand basin, white, flat back, size 550 x 400mm including 32mm dia brass waste coupling, fitting and PVC waste pipe 32mm dia complete all as specified and directed. Note : Rate quoted under this item deemed included fixing of taps, waste fittings and union, plug and chain and connecting up to supply pipes, wastes or traps etc.

S&F vitreous china urinal half stall type urinal complete including providing and fixing plugs bedding urinal against wall in CM 1:2 securing urinal to plugs with & including 60 mm brass screws pointing around urinal back in cement fixing automatic flushing cistern with brackets flush pipe grating and union for discharge pipe complete all as specified and directed.

S & F in repair 15 mm dia Bib taps, cast copper alloy, fancy type with capstan heads ,chromium plated, screwed down , screwed for iron pipe or for brass ferrule and fixed, complete all as specified.

S & F in repair 15 mm dia fancy type angle/stop cock, cast copper alloy, with chromium plated, screwed down , high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed, complete all as specified.

S&F in repair 15 mm bore stop valves, fancy type, chromium plated, cast copper alloy, long shank and cup (concealed type) screwed down, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified and directed.

S & F in repair, fancy type pillar tap 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed, complete all as specified and as directed.

S&F in repairs PVC connections 15mm size of PTMT of 450mm long. complete all as specified.

S&F in repair gunmetal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, for 20mm bore complete all as specified and directed.

S&F in repair brass, chromium plated tubular towel rail, 20 mm dia, D type, 60 CM long between flanges, fixed with rawl plugs complete all as specified.

S&F in repair coloured powder coated Darpery Rod of aluminum 25mm inner dia with supportys on coloured powder coated aluminum decorative type desinge and pattern approved by GE including decorative brackets both ends complete all as specified.

Supply and fixing of rubber beading 40mm strip in bottom of door complete all as specified and directed.

S&F in repair 15 mm bore brass chromium plated shower rose 125mm size with arms, with or without swivel joints and fixing to steel pipe or union complete all as specified and as directed.

S&F 5mm thick bevelled edge best quality looking mirror of size 600x450 mm with 30 mm PVC beading all around the glass, mounted over 3mm thick PVC sheet or 6mm thick AC bldg board, complete all as specified and directed.

S&F in repair stainless steel grating doom 100mm dia with waste hole fixed in cement complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing of serviceable pipes and unserviceable pipe removal from site of work complete all as directed.

All as per item No 26 hereinbefore but 20mm bore. Complete all as directed.

All as per item No 26 hereinbefore but 25mm bore. Complete all as directed.

Re-fixing of old serviceable steel GI tubing, 15mm bore and connections in new or old position (walls, ceiling, floors etc) with and including all new fittings complete all as directed. (Note :- Serviceable pipes shall be otained from Srl item No 26 hereinbefore for re-use)

All as per item No 29 hereinbefore but 20mm bore GI pipe complete all as directed. (Note :- Serviceable pipes shall be otained from Srl item No 27 hereinbefore for re-use)

All as per item No 29 hereinbefore but 25mm bore GI pipe complete all as directed. (Note :- Serviceable pipes shall be otained from Srl item No 28 hereinbefore for re-use)

S&F for GI tubing 15mm dia bore medium grade with and including all fittings ISI marked and fixed to wall, floor and ceiling etc complete all as specified.

All as per item No 32 hereinbefore but 20mm bore complete all as specified and directed.

All as per item No 32 hereinbefore but 25mm bore complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. and segregation serviceable bricks, keep them staking for re use complete all as directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 etc,complete all as specified.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 etc,complete all as specified.

Taking down old cement / lime plaster on brick or concrete surfaces etc including racking out joint, hacking for key screbbing down with water etc.complete all as directed.

M & L for rendering 15 mm thick in Cement Mortar 1:6 on fair faces of brick wall finished fair & even complete all as specified and directed.

M & L for rendering 15 mm thick in Cement Mortar 1:4 on fair faces of brick wall finished fair & even complete all as specified and directed.

M&L for 15mm thick plastering on fair faces of brick wall in CM (1:4), surface finished even and fair with using extra cement complete all as specified and directed.

M&L for 10mm thick rendering on fair faces surface in cement plaster (1:3) as in ceiling and fininshed surface even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15 mm thick in Cement Mortar 1:4 on fair faces of brick wall mixing of WPC as per manufacturer's instruction finished fair & even complete all as specified and directed. NOTE:- WPC shall be measured and paid seprately under suitable item.

M&L for preparation of newly plastered or brick wall surfaces and applying two coats of oil bound distemper over a coat of wall care putty and primer on walls complete all as specified.

M&L for three coats of white wash on new ceiling surfaces including preparation of surfaces complete all as specified and directed.

M&L for preparation of newly plastered or brick wall surfaces and applying two coats of exterior weather proof paint over a coat of wall care putty and primer on walls complete all as specified.

M&L for preparing old decorated plastered or unplastered surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot and applying one coat of white wash complete all as specified and as directed.

M&L for preparation of newly plastered surfaces on walls and apply two coats of oil emulsion distemper over a thin layer of wall care putty complete all as specified and directed.

M&L for preparing old/newly plastered or unplastered surfaces of wall and applying two coats of exterior emulsion paint (Ace paint from Asian Paints or other equivalent brand from Berger/ Shalimar Paints) over and including one coat of primer complete all as specified and directed.

M&L for preparing old decorated plastered or unplastered surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot and applying one coat of white wash complete all as specified and as directed.

Taking down old chowkhat or frames with shutters (without taking off shutters from the frame) not exc 1.5 Sqm each and remove materials from site of work complete all as specified and directed.

Taking down old chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but not exc 4.0 Sqm each and remove materials from site of work complete all as specified and directed.

S&F for pressed steel frames of size 165x60mm made out of 1.25mm thick mild steel sheets for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate complete all as specified and as directed.

M&L for PCC (1:2:4) type Bo (using 12.5mm graded stone aggregate) as in filling to hollow sections of pressed steel door frame etc including necessary form work as required complete all as specified and directed.

S&F for factory made plain framed paneled shutter 35 mm thick IInd class HW (any number & Panels) with lock rail and panel of 9 mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both face, the size of rail and style kiln seasoned and chemically pressure treated complete all as specified and directed.

S & F for factory made 35 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter , divided into squares with plain chamfered rounded, mitered and rebated sash bars complete all as specified.

M&L for applying two coats synthetic enamel paint over one coat of pink primer on new wooden surface of any description not otherwise described over 10 cm width or girth complete all as specified.

S&F for solid PVC door frame of size 50mm x 47 mm made out of 5mm PVC sheet with wood grains printed on if reinforced with MS square tube incl 75mm long MS screws for fixing to walls all as per specified in SSR complete all as specified and directed .

S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel’ having a PVC sheet strip’ of 20mm width stuck inside with solvent cement for stiles and both side prelaminated PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the fame at site as per specification & drawing. complete all as specified .

S&F stainless steel butt hinges of size 100 mm, medium weight, cold rolled mild steeland fixed complete all as specified and directed.

S&F for 150 mm long aluminum anodized barrel tower bolts of extruded section & fixed complete all as specified and directed.

S&F for 150 mm long aluminum handles cast type anodized complete all as specified and directed.

S&F for 250 mm long Aluminium anodised , sliding door bolt with hasp , staples (bolt type) and fixing clipsof sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified .

S&F 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate in wooden/steel frame by welding or screwing complete all as specified and directed.

Supply and fix galvanized mild steel wire cloth 0.56 mm nominal dia of wire and avg width of a-pertare 1.18 mm fixed with tinned tacks or galvanized wire staples complete all as specified .

Supply and fix in repair galvanized mild steel wire cloth 0.56 mm nominal dia of wire and avg width of a-pertare 1.18 mm fixed with tinned tacks or galvanized wire staples complete all as specified .

S&F 4 mm thick figured glass, square or rectangular n. exc 0.5 sqm in each pane and fixing to aluminium window, ventilator, shutter complete all as specified and as directed.

S&F 4 mm thick sheet glass ordinary quality, square or rectangular n. exc 0.5 sqm in each pane and fixing to aluminium window, ventilator, shutter complete all as specified and as directed.

M&L for providing cement concrete 1:3:6 Mix, type C1 (using 20 mm graded stone aggregate) as in concrete block for hold fast and similar works including necessary form work complete all as specified and directed.

M&L for mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to grade Fe.290. complete all as specified.

M&L for applying two coats of synthetic enamel paint over old painted steel/iron surfaces exceeding 10cm width or girth including preparation of old steel/iron surfaces complete all as specified

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel/iron surfaces not exceeding 10cm width or girth.complete all as specified.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for precast RCC 1:2:4 mix, type B1 (using 20 mm graded stone aggregate) as in landing, cover slab (for manholes), chulla hoods, chajjas, water throughs, managers shelves and similar articles with plain faces incl necessary form work complete all as specified and directed.

M&L for 10 mm dia and over mild steel TMT bars , cut to length, bent to shape required, including cranking, bending for slab , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

S&F including fabricating of aluminium powder coated having minimum thickness of powder coating 50 micron for door / window/ ventilator frame, shutters & partition including necessary joining cleats, glazing clips, aluminium snap beading having minimum wt 100gm/RM, rubber neoprene gasket, screws, dash fasteners, rawel plug for fixing of screw in wall or floor etc., aluminium sections as approved by GE complete all as specified and directed. Note : - (i) Builders Hardware shall measured and paid separately under respective item of Schedule 'A' . (ii) Only weight of aluminium section shall be measured and paid. No claim what so ever shall be entertained by the Govt on this account. (iii) Thickness of section shall not be more than 2mm.

S&F for aluminium grills of size exc 5mm x 7.5mm and aperture n. exc 80mm incl fixing with aluminium hannel 1mm thick with steel screw and tint match with existing complete all as specified.

Taking down old cement plaster from conc surfaces incld APP mambrane and remove materials from site of work. Complete all as directed.

M&L for 10 mm thick screed bed on fair face of PCC padding in cement mortar 1:3 finished even and fair complete all as specified.

Demolition of cement concrete of any description and if any position not otherwise specifically provided for and removing the dismantled material to a distance upto 1.50 KM and depositing where directed by the Engineer-in-Charge.

M&L for PCC 1:2:4 type B-1 using 20 mm gradred stone aggregate as in roof kerbs or mud spots, rounded or chemfered on edges complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm gradred stone aggregate as in roof padding as in levelling course to maintain the true roof slope finished even and fair without using extra cement complete all as specified and directed.

M&L for applying one coat of cold applied bituminius primer over cleaned surface @ 0.30 Ltr per sqm and one coat of polymeric modified bitumen 85/25 @ 1.2 Kg/Sqm over bituminius primer then followed by APP modified five layer polymeric mambrane 3 mm thick minimum weight 3.5 Kg per Sqm reinfored with polyster non woven fabric (weighting not less than 150 Gm per Sqm) manufactured by M/S STP LTD or its equivelant or IWL or M/S Torchtaro Membranes & Bitumen Products Pvt Ltd laid as per the maufacturer's instruction with side over lap of 75 mm and end over lap of 100 mm and applying one coat of polymericcc modified bitumen 85/25 @ 1.20 Kg per Sqm finally finished with two coats of aluminium paint @0.20 Litre per sqm for each coat complete all as specified and directed.

M&L for cutting out cracks to V section in existing roofs or terracing, clening out, wetting, grouting with cement and sand slurry 1:3 complete all as specified.

M&L for 75 mm thick PCC 1:3:6 type B1 (using 40mm graded stone agg) as in plinth protection/foot path laid in alternate bays on concrete surfaces finished even and smooth with using extra cement including necessary construction joints complete all as specified and directed.

Supply only integral water proofing compound (Powder type) complete all as specified and directed.

Taking down eaves gutters and rain water pipes of only size/ pattern with all the fittings and remove materials from site of work. Complete all as directed.

S&F for 110 mm borePVC (SWR) pipes single socketed, in any length with rubber ring joints and jointed with adhesive and laid in floors/ trenches. Complete all as specified.

All as per Srl item No 75 hereinbefore but fixed along walls. Complete all as specified.

S&F for 100 mm bore PVC (SWR) bends and fixed in position with adhesive. Complete all as specified.

S&F for 110 mm bore PVC (SWR) branch piece double Y and fixed with adhesive. Complete all as specified.

S&F for 110 mm bore PVC (SWR) single T and fixed with adhesive. Complete all as specified.

S&F for 110 mm bore PVC (SWR) vent cowl. Complete all as specified.

S&F for 75 mm bore PVC (SWR) bends and fixed in position with adhesive. Complete all as specified.

S&F for 75 mm bore PVC (SWR) branch piece double Y and fixed with adhesive. Complete all as specified.

S&F for 75 mm bore PVC (SWR) single T and fixed with adhesive. Complete all as specified.

S&F for 75 mm bore PVC (SWR) floor trap plain with grating including joint with adhesivs Complete all as specified.

S&F in repair rotational moulded polyethylene water storage tank, double layer construction, ISI mark (cylindrical vertical with closed top) hoisted and fixed in position with and including 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings, of capacity 1000 Ltrs complete all as specified and as directed.

S&F ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipes or brass ferrule and fixed of size 20 mm (Minimum weight 210 Gram) complete all as specified and as directed.

M&L, for cement concrete 1:5:10 using 40mm graded brick agregate as in filling under sunken floors etc Complete all as specified.

M&L for 10mm thick cament plaster on fair faces of RCC slab in CM (1:3), surface finished even and fair without using extra cement including mixing of WPC as per manufacturer instrucction complete all as specified and directed. Note : WPC shall be measared and paid separately.

M&F for applying evenly a tack coat of industrial bitumen 85/25 @ 1.20 kg/ Sqm including cleaning the surface. Complete all as specified.

Excavation in trenches in soft/loose soil n exc 1.5 M wide & n 'exc 1.5 M in depth as in foundation etc and getting out in soft/loose soil complete all as specified and as directed.

Demolition and breaking up of 75/110 mm bore PVC/CI pipes fixed along walls/floors etc complete all as specified and directed.

Returning & filling- in soil including spreading, levelling watering and well ramming in layers not excd 25 cm thick each complete all as specified and as directed.

Removing excavated material to a distance exc 0.50 Km but not exc 1.5 km and depositing where directed at a level not exceeding 1.50 meter above the starting point complete all as specified and directed.

M&L for 150 mm dia internal SGSW pipes Gde 'A' quality laid in trenches jointed in CM 1:1 and tested after the pipes are laid and jointed complete all as specified and as directed.

M&L for concrete bed to pipes in PCC (1:3:6) type C2 (using 40mm graded stone aggregate) including packing under and haunching against the sides of pipes after they are laid to slope and tested for 150 mm bore sewer pipe line complete all as specified and directed .

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling, mass concrete etc complete all as specified.

M&L for precast RCC jallies measured solid, including all mouldings and set in CM (1:4) of 50mm thick size complete all as specified and directed.

M&L for mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming complete and all as specified and directed.

M&L for RCC (nominal mix) Type B1, 1:2:4 (using 20mm graded stone aggregates) as lintel over 1.5m span complete all as specified and directed.

M&L for formwork for rough finish to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated conforming to Fe-290 (Gde-E-165) complete all as specified and as directed. Note : The rates quoted allow for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete.

M&L for Mild steel work galvanised steel wire as cloth drying wire 2.40mm dia and tied to steel work complete all as specified.

M&L machine made chequered cement concrete tiles 20cm x 20cm x 25mm thick, set and jointed and pointed in neat cement slurry with grey cement and pigment in floorsn over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

Dismantling old plain or corrugated Asbestos cement sheeting in roof coverings etc and remove materials from site of work complete all as directed.

M&L for Pre-painted galvalume alu. Zinc coating GI based corrugated steel sheet 0.50 mm thick (total coated thickness) of any colour having tensile strength 550 M pa minimum yield strength as in roof covering fixed using hot dip galvanized self drilling and self tapping screws neoprene and EPDM washers. (Note : minimum, yield strength 550 Mpa with hot dip alloy of 55% Aluminium, 43.5 %zinc, 1.5% Silicon and finished with resin coat on both surfaces)

All as per item No. 118 here in before but plain sheet.

M&L for 60mm thick machine pressed,coloured, glossy finish(rubber moulded) precast cement concrete interlocking pavers/ tiles Grade M-35 made with grey cement and pigment any size ,pattern and shape as approved by GE, laid dry over and including 50 mm thick sand cushion in patterns with different colour paver block /tiles complete all as specified and directed.

M&L for plain cement concrate1:2:4 type B-2 (using 40mm graded crushed stone aggregates) as in foundaion filling and mass concrete etc, complete all as specified.

Excavating in post holes (or similar holes) in soft/ loose soil, each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance n.exc 50 m and making good surface complete all as specified and directed.

M&L preparation of newly plaster surfaces and applying two or more coats of 100 % premium acrylic emulsion paint having VOC less than 50 gm/ltrs and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 ltrs/10 sqm over and including priming coat of exterior primer applied @ 0.90 ltrs/10 sqm over new surfaces etc all as specified and directed.

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint over a coat of alkali resistant primer of approved shade/tint complete all as specified.

M&L for 40 mm thick cement concrete 1:2:4 thpe B1 using 20 mm graded stone aggregate finishing cement concrete surface even and smooth without using extra cement etc all as specified and directed.

M&L for cement concrete 1:2:4 type B1 using 20mm graded stone aggregates like rounded and chamferred on edges complete all as specified & directed etc .

M&L for dholpur stone base 300mm wide of thickness not less than 35-40 mm etc,over and including 15mm thick screed bed or bedding layer in cement mortar(1:4) complete all as specified.

S&F Dholpur sand stone jallies 30 mm thick machine cut edge,uniform colour ( Each stone jallies of size 3' x 2') fixed in between the post with suitalble locking and jointing arrangement and of design as approved etc, complite all as specified.

S&F Dholpur sand stone carving post of section not less than 3''x3'' of design as approved be GE of length 0.70m to 1.00m fixed in base stone by providing a recess for locking arrangment complete all as specified and directed.

Surface dressing not exceeding 15cm deep in soft /loose soil complete all as specified.

Taking down carefully existing unserviceable aluminum point wiring of any description & in any position with and including pvc/steel conduit all fitting, accessories & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings call bell, lamp holders etc and making good the disturbed surface of walls, floors, ceiling etc to match with the existing surfaces complete all as directed. NOTE: Old fittings/fixtures/accessories like switch, sockets, lamp holders, regulators etc found in serviceable condition shall be removed carefully for reuse in the work and shall be paid for separately under appropriate item of Schedule `A’.

Material and labour for point wiring for one light point or one fan point controlled by one switch with using 1.5 Sqmm (nominal area) stranded copper conductor cable FR, single core, PVC insulated & unsheathed cable, 1100 volts grade in and including concealed PVC conduit (Medium grade) of suitable size not less then 20mm dia all as directed with using new sunken type pressed steel box/terminal boxes of suitable size, 2mm thick duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings/junction boxes with and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor cable FR single core. PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed.

NOTE : (i) The quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing colour of surface. The portion of point wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using PVC rawl plugs and provision of 8covering sunken boards/terminal boxes / junction boxes of any shape and size with 3mm thick laminated sheet fixed with suitable GI screws and cup washers) (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of BOQ (Make of Cable/wire:- : Havells /Finolex/Polycab/Grandlay Make of PVC Conduit:-Finolex/Ess Ess Kay Engineering/Kalinga/Asian/Jindal, Make of Laminated Sheet:-/Hylam/National)

All as per item No 132 hereinbefore but point wiring for 5 pin switch socket outlet combination, 5/6 Amps on independent board.

All as per item No 132 hereinbefore but point wiring for one 5 pin socket outlet, on same board .

All as per item No 132 hereinbefore but point wiring for one six pin socket outlet, 15/5 Amps (independent board) controlled by one switch with using 2.5 Sqmm (nominal area) stranded copper conductor.

M & L for switch flush type single pole one way 5 Amps, 240 volts, white ivory finish complete all as specified. (Make :- Anchor(Panta)/ Cona/ Leader)

Refixing switch flush type single pole one way 5 Amps, 240 volts, white ivory finish complete all as specified. (Make :- Anchor(Panta)/ Cona/ Leader)

S&F switch socket combination multi purpose, 5 Pin 6 amps, flush typeWith Indicator complete all as specified and directed.Make:-Cat part No 2216 of cona or equivalent of Leader/ Anchor(Panta).

S&F for switch socket combination multi purpose, 6 Pin 6/16 amps, flush typeWith Indicator complete all as specified and directed. Make:-Cat part No 2711 of cona or equivalent of Leader/ Anchor(Panta).

M&L for socket outlet 2 in 1, 5 pin, 6 Amps, 240 volts flush type white ivory finish complete all as specified.Make :- Anchor(Panta) , Cona , Leader

M&L for ceiling rose surface Bakelite three terminal, 18 x 50 mm complete all as specified. (Make :- Anchor(Panta) , Cona , Leader)

M&L for lamp holder insulated body with back plate for batten fitting complete all as specified. (Make :- Anchor(Panta) , Cona , Leader)

S&F for step type electronic fan regulator single phase ,230 volt, 100/120 watt . Complete all as specified. (Size of PT switch ) Make:-Cat part No 3211 of cona or equivalent of Leader/ Anchor(Panta).

Supply & Fix for decorative slim linear LED T5 AL batten tube light fitting 01x20 watt light with co extruded polycarbonate body, environmental frendly, energy efficient ready to use pack with all accessories and connecting the same to ceiling rose with using copper conductor 50/0.02 flexible PVC sheathsd and fixing arrangement for fixing the light fitting to wall/ roof surface complete all as specified. (Make-Havell's Cat Part No LUMILINEBS20WLED865SPCWH/Surya Cat No -SLEBT -20 /CG cat No -LCTL 18 CDL)

S&F for LED mirror light complete with lamp all as specified. (Make : Havells Cat part NoHavells Cat part No LUMILNEBS9WLED865SPCWH/Surya Cat part No -SLE-BT-10/ CG Cat part No -LCTL-9 CDL )

S&F Street/ Security light fittings LED 15 Watt, new generation energy saving & enviromental friendly long life versatile pressure die cast aluminium IP66 roadway luminaire with high power LED as light sourcewith acrylic cover suitable for pipe of dia 40 mm (maximum) with and including GI bracket made out of 40 mm dia light grade GI pipe of length 1.20 including necessary nuts, bolts washers and wire of suitable lenght for connection complete all as specified and directed. Make;Havells Cat part No - ENDURAPEARLSL15WLED757SASYTOPC /Surya Cat Part No -SLRUL 15W IP 66LXN/CG cart part No -LSTS-15CDL.

M&L for sub main wiring using two single core PVC insulated, unsheathed stranded copper conductor cable FR of size 6.0 Sqmm of voltage rating upto and including 1100 Volts grade in and including concealed PVC conduit, med grade of size not less then 25 mm bore along-with one run of PVC(green colour) insulated , unsheathed, stranded copper conductor of size 6 Sqmm as earth continuity conductor cable FR all as specified and directed including taking down old submain wiring with any type of conduit. Complete all as specified. (NOTE : Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit.) incl taking out old sub main wiring with any type of conduit. (Make of Cable/wire:- : Havells /Finolex/Polycab/Grandlay Make of PVC Conduit:-Finolex/Ess Ess Kay Engineering/Kalinga/Jindal, Make of Laminated Sheet:-/Hylam/National)

All as per item No 148 hereinbefore but 4 Sqmm and 4 Sqmm earth wire with PVC conduit 20mm dia med grade

M&L for single pole and neutral enclosure with a two pin and earth plug and socket complete in metal clad board (Industrial type) with one single pole MCB of capacity 20 Amps, 240 Volts complete fixed on wall by provisioning of suitable sizes of MS strips, nuts, bolts and washers all as specified. (Make:ABB/Schneider/Legrand)

NOTE:- Site clearance of materials- All demolished material obtained from dismantling/demolition items shall be deposited at place shown by Engr-in-charge properly spread and levelled and site to be cleaned to the entire satisfaction of Engr-in-charge otherwise panel recovery to a sum of Rs. 10000.00 be deducted from dues without any prior intimation.

M/S YOGANSH CONSTRUCTION CO.

anand enterprises

M/s. Ravi and brothers

J.N.R. Engineers and Builders

M/s Kishan Construction Company

SHRI RAM CONSTRUCTION

YASH DEVELOPERS AND CONSTRUCTION COMPANY