IMPROVEMENT TO SMQ COMMUNITY CENTRE AND REWIRING AT CERTAIN LOCATIONS AT AF STN DIGARU.

Amount

S & F Anodised aluminium snap grid frame work size of grid 605 x 605mm for false ceiling complete all as specified and directed.

S & F hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

M & L for providing Gypsum board 12 mm thick in ceiling fix with screw including preparation of new ceiling surfaces and applying two coat on oil bound distemper over a coat of 1 mm thick wall care putty complete all as specified and directed.

S/F 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jamps, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S&F aluminium anodised frame for doors, windows, ventilators including joining cleat for ficing of powder coated (min thickness 50 microns) complete all as specifed and directed.

S & F Anodised aluminium power coated door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete complete all as specified and directed.

S&F Aluminium anodised powder coated window shutter, fixed type without sash bar, alumn section section weighing 0.55 kg per mtr incl necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws,incl suitable locking systems etc complete all as specifed and directed

S & F aluminium powder coated Grill (DECO grill, DG 103 of 7.5 mm thick of M/s ELESAR, M/S Royal Grill, M/S National Grill Associated Profiles & Aluminium Ltd.) fixed with suitable 'F' section(No. 8584)15.30 x 23.40 x 1.40mm(minimum), fabricated and riveted to aluminium windows/ventilator complete all as specified and directed.

S & F aluminium anodised XPM jali, 24 gauge nominal dia of wire and average width of aperture 1.40mm, conforming to IS-665 and fixed as in aluminium door/window shutter complete all as specified and directed .

M/L for Brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in CM (1:4) complete all as specified and directed.

M&L Reinforced cement concrete (nominal mix) type B1 (1:2:4) (using 20 mm graded aggregate) as in beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified and as directed.

S&F Formwork to sides of beam ,posts, struts, piers, columns and stanchions complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L plastering in cement and sand mortar 1:4, 15 mm thick on brick work or concrete surfaces of walls including surfaces even & smooth without using extra cement complete all as specified and directed.

M&L Preparation of new plaster surfaces in walls and applying two coat of Oil Bound Distemper over a coat of alkaline resistant primer over and including a coat of putty/POP to plumb the existing surface, (around the newly done window frames) including touching of bad/ dark patches complete all as specified and directed.

M&L for preparation and two coats of synthetic enamel paint on old treated surfaces of steel over 10cm in width or girth not otherwise described complete all as specified and directed.

S&F 20mm dia aluminium decorative type curtain rod complete all as specified and directed.

S&F aluminium decorative type brackets suitable for 20mm dia curtain rod complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6 Type C2 using 20 mm graded aggregate as in plinth protection complete all as specified and directed.

Material and Labour for point wiring with FR PVC insulated unsheathed, stranded copper conductor cable single core 1.5 Sqmm for one light point controlled by one way switch incl one PVC insulated, unsheathed single core stranded/solid copper conductor cable of size 1.0 Sqmm for continues earth wire drawn in and including PVC heavy duty casing capping 20/25 mm width complete with all accessories including sheet metal MS box of suitable size of 1.2mm thick or PVC rectangular switch board of suitable size incl 3.0mm thick laminated sheet cover and fixed with brass screws, cap washers etc to be fixed flushed on wall including white washing/colour washing / distempering to match the disturbed surfaces as directed by Engr-in-charge.

All as per item No. 22 above but for one fan point controlledby one switch complete all as specified and directed.

All as per item No. 22 above but for one 6 pin multi purpose 5 Amps socket out let independent complete all as specified and directed.

All as per item No. 22 above but for one 15 Amps switch socket out let independent but using PVC insulated, unsheathed stranded copper conductor cable of size 2.5 Sqmm and 1.5 Sqmm for earth continuity conductor for one 3 pin 5/15 Amps switch socket out let independent complete all as specified and directed.

Supply and fixing switch piano flush type, single pole, one way, 5 Amps 230 Volts complete all as specified & directed.

Supply and fixing switch socket combination 5 Amps 2/3 pin flush type complete all as specified and directed.

Supply and fixing ceiling rose, surface bakelite 65x50 mm three terminal complete all as specified and directed.

S&F LED 12 W recess mounted type pressure die-cast aluminium luminaire powder coated white finish in round profile with optimized heat sink for efficient heat dessipation and separate replaceable electronic driver complete all as specified and directed. Make- Havels / HPL / Bajaj / Philips.

S&F LED 12 W recess mounted type of 740 mm x 740 mm botton opening clean room for hygeinic facilities complete all as specified and directed. Make- Havels / HPL / Bajaj / Philips.

S & F of MCB SPN DB 8 way made of sheet steel phos phatised, powder painted with bus bar, neutral link, earth bar and Din rail 230 Volts with double door complete all as specified and directed. Make- Havells/ Indoasian / HPL / Standard.

Supply, fixing, connection and testing MCB SPN/isolator DP 240 Volts, 'C' series, breaking capacity 10 KA of rating 6-32 Amps complete all as specified and directed. Make- Havells/ Indoasian/ HPL/ Standard

Supply, fixing, connection and testing MCB SP/ Isolator SP 6-32 Amps complete all as specified and directed. Make- Havells / Indoasian / HPL / Standard.

M&L sub main wiring with two single core multistranded copper cable of 4.0 Sqmm & one solid copper cable of 2.5 sqmm for continuous earth wire both PVC insulated & unsheathed drawn through and including PVC heavy duty casing capping 20/25 mm width complete with all accessories or to be fixed on wall respectively including white washing/colour washing/distempering to match the disturbed surfaces complete all as specified and directed.

Taking out carefully copper/aluminium point wiring including existing conduit /PVC Cassing capping(light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

Material and Labour point wiring in pvc conduit of sizes 20 MM dia concealed with FRLS PVC insulated unsheathed, stranded copper conductor single core 1.5 Sqmm cable for one light point controlled by one one way with all accessories, junction box etc incl one FRLS PVC insulated, un sheathed Single core stranded/solid copper conductor cable of size 1.5 Sqmm for continues earth wire connected to main earth dolly , including matching the disturbed surface with cement work and white washing/colour washing/distembering to match the disturbed surfaces, and also including chase cutting as per direction of Engr-in-charge. Note- After the wiring all light fitting fixing the same location.

One light / fan point controlled by one switch.

3 pin 5 amps socket outlet on independent board.

All Per itms No 36 above but with cables of size 2.5 sqmm for phase,neutral and 2.5 sqmm for earthing for 3 pin 15 amps socket outlet on independent board complete all as specified and as directed.

S & F switch piano type flush single pole one way 5 Amp switch complete all as specified and as directed.

S &F Switch socket out let 2 in 1, 3pin 5A complete all as specified and as directed.

Supply and fixing switch socket combination 5A/16,5 in 1 complete all as specified and as directed.

M/S TRADE CENTRE

M/S B.H. ENTERPRISE

Ms N D Enterpise

M/s Rawat Enterprises

M/s Dhruv Enterprises

M/s Capital Traders

M/S Vimal Enterprise