Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.1 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹45.2 L+₹1.1 L (2.51%)Rejected-Finance 46 HUSENI LAKDA BAZAAR 242 BELLASIS ROAD MUMBAI 400008 | MUMBAI | MAHARASHTRA | 400008 | L2 | Rejected-Finance Not Reasonable | |
| 3 | L3₹45.6 L+₹1.5 L (3.32%)Rejected-Finance TRIVANDRUM | L3 | Rejected-Finance Not Reasonable | |
| 4 | L4₹46.2 L+₹2.1 L (4.71%)Rejected-Finance NOT AVAILABLE | L4 | Rejected-Finance Not Reasonable | |
| 5 | L5₹47.8 L+₹3.7 L (8.39%)Rejected-Finance ROOM NO D 297 PART III GANESH MURTI NAGAR CUFF PARADE ROAD COLABA MUMBAI 400005 | MUMBAI | MAHARASHTRA | 400005 | L5 | Rejected-Finance Not Reasonable |
Tender Value
₹49.9 L
EMD Value
₹99,800
Closing Date
28 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Saurabh Gupta,EE
GE (W) Colaba, Mumbai
ADDITION/ALTERATION TO EXISTING SEWAGE SYSTEM , RANGE AND SPL REPAIR OF BLD NO P 4F OF NCC OFFICER SERVENT QTRS UDER GE (W) COLABA ,MUMBAI
2022_MES_549587_1
8679/E8
Open Tender
Civil Works
Item Rate
180 days
GE (W) Colaba
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE (W) Colaba, Mumbai
₹99,800
Yes
14 Oct 2022
2 Sept 2022
30 Sept 2022
2 Sept 2022
28 Sept 2022
15 Sept 2022
Amount
Excavating in trenches n exc 1.5 m width and n exc 1.5 m depth and getting out in hard dense soil all as specified and directed.
All as per item no 1 above but depth exc 1.5 m all as specified & directed
Supply and laying in repairs reinforced concrete pipes, class NP2, 200 mm dia laid and jointed in cement mortar with collars all as specifed and directed.
S&F in repairs for providing, lowering and laying HDPE DWCPE (SN8) pipes as per IS : 16098 of 2013, 150 mm internal dia, laid and jointed with and including elastomeric sealing 'O' ring as per manufacturer's instructions all as per specified and directed. Note - The rate quoted includes laying of pipes in level or to falls in trenches, etc. on concrete bed or directly on hard ground as indicated and making joints and testing as specified.The quoted rate also includes for all necessary extra joints, waste, and cutting etc.)
S&F in repairs for providing, lowering and laying HDPE DWCPE (SN8) pipes as per IS : 16098 of 2013, 200mm internal dia, laid and jointed with and including elastomeric sealing 'O' ring as per manufacturer's instructions all as per specified and directed. Note - The rate quoted includes laying of pipes in level or to falls in trenches, etc. on concrete bed or directly on hard ground as indicated and making joints and testing as specified.The quoted rate also includes for all necessary extra joints, waste, and cutting etc.)
M&L PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate for concrete bed to 150 MM dia drain pipes including packing under and for hauching against the sides of pipes after they are laid and tested all as specified and directed. Note :- The rates include for any necessary shuttering and supports to concrete and for laying beds to falls.
M&L PCC 1:3:6 type C-2, using 40 mm graded crushed stone aggregate for concrete bed to 200 mm dia drain pipes including packing under and hauching against the sides of pipes after they are laid and tested all as specified and directed. Note :- The rates include for any necessary shuttering and supports to concrete and for laying beds to falls.
Demolition of reinforced cement concrete in any position (reinforcement cut as required to facilitate demolition) and removing rubbish to a distance nexc 50m at low lying area all as specified and directed
Dismantling ceiling boards (Fibre/Pulp/Plywood) any thickness including cover fillets all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and directed.
M&L PCC 1:4:8 type D2 using 40mm graded crushed stone stone aggregate in foundations, filling and mass concrete all as specified and directed.
M&L PCC 1:2:4 type B0 (using 12.5mm graded crushed stone aggregate) on lintels up to 1.5m clear span, cills, steps, seismic & other similar bands, plinth course, string course, lacing course, parapets & railing up to 60cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in items 159, water trought & the like including weathering, slightly rounded or chamfered angles & throating all as specified and directed.
M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 including demolition of brick work including all quoins, arches, Pillars etc. but excluding ashlar facings built in cement mortar all as specified & as directed.
M&L brick work with fly ash modular building bricks having standard size built in CM 1:3 complete including demolition and removing rubbish out side MD land all as specified & as directed.
All as per item No 14 above but except bricks with old size sub class 'B' bricks (obtained from demolition) straight curved on plan exceeding 6 metre mean radius built in CM 1:4 for cracked wall of manholes, septic tank, soak pits all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in any type of soil all as specified and directed.
Removing excavated material outside MD land exc. 1.50 km but n exc. 15 km and depositing where directed.
M&L rendering 15mm thick in cement mortar 1:4 on brick or concrete masonry walls, finished surfaces even and fair without using extra cement and using 2 % water proofing all as specified and directed. Notre- (i) WPC shall be measured and paid for separately as 'Supply only'.
Supply only integral water proofing compound powder
M&L PCC 1:2:4 type B2 using 40 mm graded crushed stone aggregate in , benching, rounded or chamfered on edges including necessary formwork all as specified and directed.
M&L PCC 1:2:4 type B1 ( using 20 mm graded crushed stone aggregate ) as in copings & in drains etc including necessary formwork & moulds all as specified and directed
M&L hardcore of gauge exc. 63 mm, of broken stone or boulders deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed.
M&L 75mm thick PCC 1:3:6 type C2 using 40mm graded crushed stone aggregate as in floors, plinth protection, finished surfaces even and fair) laid in panels including joints filled with sealing compound grade 'A' all as specified and directed.
S&F in repair 900mm x 600mm FRP manhole cover of 12.50 ton loading capacity with frame over manhole coping concrete all as specified and directed. Make : Everlast or equivalent
M&L precast RCC 1:;2:4 type B1 using 20 mm graded crushed stone aggregate, set in cement mortar (1:6) in landing, cover slab (for manholes etc.) and similar articles with plain faces all as specified and directed.
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required, internal dia of pipe 150mm all as specified and directed.
Material and labour for MIXED CEMENT CONCRETE DELIVERED ON BUNKER M30 grade, type 1, 1:11/2:3 (20 mm graded aggregate) as in flooring and all other similar works all as specified and directed.
M&L earth filling in floors etc. spreading and leveling in layers, well ramming including watering as required all as specified and directed.
M&L mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips and including welding has to be done with minimum 20 cm over lap for new and old of any height all as specified and directed.
M&L mild steel TMT bars of any dia in stirrups, spaces and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and as directed
M&L, reinforcement with TMT bars 6 to 8mm dia, cut to length, bent to shape required includingcranking,bending sprirallyand binding with and includingmild steel wire (annealed) not less than 0.90 mm dia all as specified and directed.
S&F hard drawn steel welded wire fabric mesh 100 x 100 x 3mm dia cut to lengths bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied anchored over 3 to 4 inch long iron nails at a distance of 0.6 m in both direction and fixed in walls / reinforcemnt weight not less than 1.37 Kg/Sqm but not exc 4 kg per sqm for fixing and for bracing, supporting or otherwise holding firmly in position so that the placing and ramming of concrete will not displace it. The rates include for straightening, raking or circular cutting and waste. Rates also include for straightening where reinforcement is supplied in rolls/coil.
M&L RCC work as in columns, beams, slabs, chajja, railing in M30 (Design Mix) using 12.5 mm nominal size crushed stone aggregate all as specified and directed.
Providing and fixing special water tight centering and shuttering including bolting, strutting, propping etc. so as to withstand a pressure of 0.1 Mpa including removal of form at all locations including beams, columns, slabs, walls, foundations, footings, landings, stairs, balconies etc or in any similar work all as specified and directed.
M&L 20-25 mm average thick Ready Mix Plaster in multi layer of make / brand - ACC's Accoplast / CK Birla's Aerocon / Speed Dry Mix's Ecoplaster / Magic Plast / Build well, mixed with liquid water proofing compound on other than fair faces of brick wall or concrete surfaces and including taking down existing plaster all as specified and directed.
M&L for 12 MM Thick ready mix plaster in single layer on brick wall or concrete surfaces including making groove of appropriate size, on other than fair faces of concrete/brick surfaces (internal surface) and finished surface even & smooth without using extra cement including taking down existing plaster all as specified and as directed. Name of Manufacturer: M/s ACC acopalst/CK Birla Aerocon/Premier Floor to Roof Materials pvt. ltd/ M/s Walplast Products pvt. ltd/ M/s Ultratech Cement Ltd/M/s Sound buildcare pvt. Ltd/ or other approved equivalent make.
Material and labour for preparing newly plastered surfaces of walls / ceilings by scrapping / rubbing and applying two coats of Anti-fungal, Dust resistant, Water repellant, Crack-bridging, weather proof type (Ist quality), Exterior Acrylic Emulsion paint (100% Acrylic) Base coat of Apex ultima of Asian Paints, protek duralife and top coat of Apex Ultima protek, over a coat of "Trucare" exterior wall primer, through authorized applicator only complete all as specified and directed. Make: Asian Paints / Berger Paints ( Weather Coat All Guard) / Nerolac (Excel Top Guard) / Dulux Paints ( Dulux Weather shield Max), sample as approved by GE.
M&L for preparation of newly plastered brick/concrete surfaces and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 3mm thick (minimum) Biral white wall care putty including rubbing with sand paper through authorised applicator of paint manufactures only of approved shadeall as specified and directed. Make:-"Tractor Uno" of Asian paint/'JAdoo' of Berger paint/ Nerolac beuty of Nerolac paint/as approved by GE
M&L for dark or light ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 including dismantling all as specified and directed.
M&L for dark or light shade ceramic tiles 10 mm thick cut to size (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm on vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles laid over and including 10mm thick rendering or backing layer in cement mortar 1:4 including dismantling all as specified and directed.
M&L anit skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles & including dismantling as specified and directed. Make : Johnson / Kajaria / somany
M&L coloured glazed digital ceramic wall tiles joint free 300x450x7mm / 300mm x 600mm x 7mm thick in vertical surfaces such as skirting and dados set and jointed in neat cement slurry pointed in white cement mixed with pigment to match the shade of tiles & including dismantling all as specified and directed. Make : Johnson / Kajaria / somany
M&L heavy duty durable parking tiles exc 0.16 but n exc 0.36 sqm area with 12-14 mm thick colour in floors etc. with and including 50 mm thick bedding layer of CM ( 1:6), set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles including dismantling all as specified and directed by Engineer in charge. Make : Johnson / Kajaria / somany
M&L non skid ceramic coloured/ designer joint free tiles, 7 to 8 mm thick (square / rectangular ) area of each tiles exceeding 0.11 sqm but n exc. 0.18 sqm , in floor etc. set and jointed in neat cement slurry and pointed in colour cement to match shade of tiles and laid over & including 15 mm thick screed bed in CM 1:6 including dismantling all as specified and directed
M&L coloured, digital glossy/matt finish outdoor ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm/600x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick rendering in CM 1:4 & including dismantling all as specified and directed by Engineer-in-Charge Make - (Make-Varmora(GL-1001 to 1032 of any type ) /Johnson/ Kajaria or equivalent)
Demolition of stone slabs and tiles of any description or thickness in floors, aprons, dados etc laid, bedded and pointed in any mortar and removal of rubbish off the site all as specified & directed.
M&L for granite (of any colour) 20 mm thick machine cut, pre polished, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone as in kitchen platform, flooring , window cill, wall cladding including 15 mm thick screed bedding in cement mortar 1: 4 and all other similar works all as specified and directed.
M&L for machine cut cudappah stone slab 20-25mm thick including 20 mm thick cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing all as specified and directed.
M&L machine cut kota stone slab for flooring 20-25mm thick including 20 mm thick cement screed base laid in floor and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing all as specified and directed.
M & L machine cut kota stone slab for flooring 20-25mm thick including 15 mm thk cement screed base laid as in skirting and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing all as specified and directed.
M&L providing cement concrete 1:4:8 type D2 using 100mm graded crushed stone aggregate and similar work all as specified and directed.
S&F machine pressed rubber moulded coloured precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60 mm thickness , M -35 grade with grey cement and pigment bedded and laid over with joint filled all as specified and directed
M&L sand filling under floors or in foundations including watering and consolidation all as specified & directed .
S&F GI tubing 15mm bore medium grade with all fittings and fixed to wall and ceiling or laid in floors including taking down all as specified and directed
S&F GI tubing 20 mm bore medium grade with all fittings as IS 1239 (PART 1) : 2004 and fixed complete to wall and ceiling or laid in floors complete with taking down all as specified and directed Make: Jindal / Tata / Swastik
Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n exc. 10cm girth all as specified and directed.
S&F in repair vitreous China Urinal, half stall type white including Urinal spreader of CP, PVC waste fittings 32mm size, PVC connection of 15mm size with PTMT nuts of length 450mm long including bracket all as specified and directed by Engineer-in-Charge. Make: Jaquar/PARRYWARE/CERA
S&F in repair chromium plated urinal valve auto closing system with in-built control cock all as specified and directed. Make: Jaquar, cat part No. 077
S&F in repairs white vitreous china wash down water closet pan (pedestal pattern) with PVC white seat cover soft closing with mild steel chromium plated or aluminised hinging device including connection to drowm pipe PVC connection and flushing pipe all as specified and directed. Make :- Jaquar ESSCO Cat Part No. ECS-551PN (P-Trap) or Equivalent in Parryware, Grohe
S&F as in repair 15 mm bore fancy type 2-in-1 bib taps long body cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule with wall flange all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 203 or Equivalent of Jaquar/ Cera.
S&F toilet paper holder, brass chromium plated all as specified and directed. Make Cat No CAN-1153N of Jaquar, Ess Ess/ Marc/ Kohler
S&F in repair corner glass shelf 200 mm(brass brackets) all as specified and directed. Make Jaquar Cat Part No -ACN 1173 /Cera or Equivqlent make complete all as specified.
S&F in repairs PVC (SWR) floor trap 75 mm, plain with CP grating with hole including joining and solvent cement all as specified and directed.
M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement all as specified and directed
S&F UPVC pipes, 50mm external dia, type-B, ISI marked (IS:13592) single socketed in any length with rubber ring joints, and UPVC bend, fixed to walls with PVC clips or under floors as SWR pipes including cutting, chasing, pinning and making floor good with existing one all as specified and directed.
S&F in repair 15 mm bore, brass chromium plated, fancy type health faucet with SS connection pipe 1.25 mtr long all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 232D or Equivalent of Jaquar/ Cera.
S&F in repairs of vitreous China squatting pan, ' Orissa patteren, size 580 x 440 mm white, with integral footrests (excluding flushing cisteren and flush pipe) including taking down of existing squatting pan all as specified and directed. Make : Cat Part No S3010104 of Cera or Equivalent in Hindware / Parryware
S&F in repairs vitreous china wash hand basin 550X 400mm (flat ball type) any size incluidng cutting for and pinning in ends of brackets and fixing of supply and waste water pipe fixed all as specified and directed.
S&F in repairs 10 litre capacity PVC low level flushing cistern with all accessories fixed with WC including syphone pipe, PVC flushing pipe of size all as specified and directed.
S&F in repair 15 mm bore fancy type angular valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 204 or Equivalent of JAQUAR/cera/PRAYAG
S&F in repair 15 mm bore fancy type concealed stop cock (regular body) cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 206 or Equivalent of JAQUAR/cera/PRAYAG
S&F in repairs PVC connection 15mm size PTMT nuts of length 600 mm all as specified & directed .
S&F in repair 15 mm bore fancy type bib taps cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule all as specified and directed. Make:- ESS ESS CROMA Cat Part No C 202B or Equivalent of JAQUAR/PRAYAG
S&F in repair fancy type CP towel rail 61 cm long all as per specified and directed. Make:- ESS ESS CROMA Cat Part No C 412 or Equivalent of JAQUAR/PRAYAG
S&F in repair CP Towel Ring all as per specified and directed. Make:- ESS ESS CROMA Cat Part No C 413 or Equivalent of JAQUAR/PRAYAG
S&F in repair CP soap dish all as per specified and directed. Make:- ESS ESS CROMA Cat Part No C 414 or Equivalent of JAQUAR/PRAYAG
S&F 15 mm bore overhead shower 250 mm dia single flow (ABS body chrome plated with grey face plate) with rubit cleaning system including shower arm 381 mm long (cat part No-SA 106 /108 Of ESS ESS Croma) Square shape with wall flange all as specified & directed. Make:- ESS ESS CROMA Cat Part Not FR 208 or Equivalent of JAQUAR/PRAYAG
S&F in repair 15 mm bore piller taps cast copper alloy,with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed shank and fly nuts. Make:- ESS ESS CROMA Cat Part No C 201 or Equivalent of JAQUAR/cera/PRAYAG
S&F in repair Kitchen sink laboratory type made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement morter to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm and bowl size 410mm x 330mm x 160mm (or nearest size as per Cat Part specified) all as specified and directed. Make : Blue Star Model No SBSD-___ or equivelant of Nirali / Prayag
S&F in repair Kitchen stainless steel plate rack (24" x24" x10") including necessary fixing / fittings & making good the existing surfaces all as specified and directed. Make Prayag Cat No P-310 or equivalent or Nirali
S&F 1000 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm bore ball valve high presure with polythene float and fly nut epoxy coated aluminium rod, tank nipple complete, screwed for iron pipe or brass ferrule all as specified in SSR Part I all as specified and directed.
M&L in repair 75 mm dia PVC (SWR) multi floor trap with grating including jointing with solvent cement all as specified and directed.
S&F UPVC pipes out side dia 16 mm of pressure rating 10 Kgf/Sqcm, spout pipe fixed in floors etc complete all as specified and directed
Taking down Chowkhats and shutters of windows/ventilators/door of any size including all fittings and fixtures all as specified and directed.
Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making, provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge. Note : (i) Glass panes will be measured & paid separately . (ii) The quoted rate shall be inclusive of cost of rubber beading and glazing clips, hionges, handle. However it will be not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate.
S&F sheet glass, ordinary quality, 5.5 mm thick, plain or frosted on one side and glazed with oil putty or fixed with rubber beading in square exceeding 0.5 Sqm in each pane or as required all as specified and directed.
S&F of stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm of approved design and fixed with aluminium windows all as specified and directed.
S&F in repair 20 mm dia aluminium alloy decorative type curtain rods to be fitted with stainless steel bracket and all other connected works all as specified and directed .
S&F curtain rod stainless steel side brackets of approved quality all as specifed and directed.
S&F 40 mm thick flush shutters, solid core construction, with block board core and ply wood face panels, both faces is covered with decorative face Laminate both side with including 5mm thick teakwood lipping all around / frame to match on both side with supply & fixing stainless steel 7.5 inch Mortice 7 lever door lock, double action with handle all as specified & directed.
S& 18mm thick UV coating, MDF board exterior grade, both side laminated with any colour anti fungal, moisture resistence, anti borer, as per IS 14587 for kitchen/cupboards shelfs fixing with 1st class hard wood lipping/beading etc. complete all as specified and directed. NOTE:- Sample as approved by GE . Make:- Action tessa/Greenply/ Century
S&F 35mm thick flush shutter, solid core construction with block board core and one side lamnaite and one side with different colours matt finish of wooden colour solid panel decorative type on both side all as specified and directed.
S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing all as specified and directed.
S&F 2nd class HW Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed.
M&L for preparation of new wood or wood based surfaces, of any description, not otherwise described over 10 cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.
S&F 2nd class hard wood 35mm thick Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securing gauge, etc sizes of member of shutter as specified SSR part-I Section 8 clause 8.24 (a) and fitted to chowkhats all as specified and directed.
S&F aluminium anodised 200 mm barrel tower bolts of extruded section all as specified and directed.
S&F aluminium anodised 75 mm barrel tower bolts of extruded section all as specified and directed.
S&F aluminium handle 200 mm cast type anodised all as specified and directed
S&F aluminium handle 150 mm cast type anodised all as specified and directed
S&F door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring of size 150 mm, fixed all as specified & directed .
S&F in repair 100 mm size butt hinges, medium weight, cold rolled mild steel all as specified and directed.
S&F in repairs for door bottom sealing strip guard/door gap file/door strip any colour fixed all as specified (minimum wt. 90gms) all as specified and directed.
S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified and directed.
Demolition and breaking up drain pipes 75 mm dia (Salt glazed ware,AC, PVC or reinforced concrete) set in cement mortar all as specified and directed
Demolition and breaking up drain pipes 110 mm dia (Salt glazed ware, AC, PVC or reinforced concrete) set in cement mortar all as specified and directed
S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls including stack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays all as specified and directed.
S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls ncluding stack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays all as specified and directed.
S&F 20mm bore gate valve with iron wheel head screwed both ends for iron pipe all as specified and directed
S&F110mm bore PVC (SWR) plain bend any radius all as specified & directed.
S&F 75mm bore PVC (SWR) plain bend any radius all as specified & directed.
S&F 110mm bore PVC junction single `T' equal or unequal all as specified & directed.
S&F PVC 110mm bore vent cowl all as specified and directed.
S&F mild steel as in hold fasts including necessary bolts etc. all as specified and directed
Dismantling of wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.
S&F framed work such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, windows, balcony in ground floor, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to FE 290 Gde -E-165 all as specified and directed.
S&F joist, channel, angle, tee sections & MS flats fixed independently, without connection plate, etc. (cut to ordinary lenghts i.e. within 20mm of the length indicated) for purlins fixed to wooden rafters and all other similar works conforming to Fe 410-W (Gde-E-250) quality-A all as specified and directed including old existing wrought iron work.
Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance n exc 50 m and making good surface all as specified and directed
M&L providing cement concrete 1:3:6 type C1 using 20mm graded crushed stone aggregate as in embedding of post all as specified and directed..
S&F rolled mild steel in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde- E- 250) quality A complete all as specified & directed .
S&F MS plate (chequerred) 5mm and over as in manhole cover fixed to angle iron frame with three Nos of hinges and 150mm handle. all as specified and directed.
S&F Mild steel screw bolts (machine made) diameter of neck 5 to 10 mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long all as specified and as directed.
S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 all as specified and directed.
M&L for preparation of new steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of epoxy paint over two coat of epoxy primer all as specified and directed. Make : Asian paints PPG / Berger protective coating or equivalent
Supply & fix in repairs pre-painted galvalume aluminium zinc coating GI based trapezoidal profile roofing sheets 0.50 mm thick of any colour/length having tensile strength of 550 MPA as in roof coverings /cladding having effective & overall width 1015 mm &1072 mm respectively, profile height 28.5 mm and centre to centre distance between ribs 203 mm fixed with self tapping screws as directed by manufacturer on wooden/steel members including scafoldings of any height all as specified and directed. Note : Rate should be inclusive of any overlapping. GI sheet should have a minimum over lapping of 10 cm while fixing in case of roof covering.
Supply & fix in repairs pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPA as in roof coverings /claddings to wall, fixed with self tapping screws including scafoldings of any height all as specified and directed.
Bringing approved earth (as approved by Garrison Engineer ) from sources outside defence land including cost of royalty if any, transportation, taxes if any etc, and forming embankment with soil including raising earth spreading in layers not exc 30 cm thick, watering, ramming/ rolling and finsihed to required size and shape etc, not exc 1.5 m high from base. Note : (i) Earth shall be supplied by contractor, from out side of MOD land, at his own arrangement, (ii) While forming embankment by earth filling, top 300mm layer earth shall be leveled stone free surface (iii) With reference to clause 3.6 of MES schedule Part-II on serial page No. 18, it is clarified that measurement, traverse of filled earth after consolidation and 10% deduction shall be made from measured and calculated volume to allow for increase in bulk
M&L for powder coated aluminium snap grid having a size of 605mm x 605mm and sections incorporated in frame work shall conform to IS 733, IS 737 and IS 1285 and snap grid frame work shall be fixed to ceiling with supporting hanger 6mm dia mild steel rod, J bolts with necessary bolts, nuts and washers all as per manufacturer's instruction. The main & cross tees shall be jointed at junction/crossings with anodized aluminum angle bracket of size 19.05mm x 19.05mm x 1.45mm, weighing 0.14 Kg per RM, fixed with suitable mild steel, bolts nuts and washer all as per manufacturer's instruction, the snap grid shall be supported at ends all along the wall with anodized aluminum angle of size 38mm x 25mm x 2.18mm, weighing 0.358 Kg per running meter all as specified and directed.
M&L 8mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous materials reinforced with cellulose fibre for fixing for 605x605 mm grids all as specified & directed .
M&L RCC 1:11/2:3 A1 (using 20mm gradded crushed stone aggregate) as in rafts, footings, foundation beams, plinth beams, base for columns etc and mass concrete all as specified & directed .
M&L RCC 1:11/2:3 A1 (using 20mm gradded crushed stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span all as specified & directed .
M&L RCC 1:11/2:3 A1 (using 20mm gradded crushed stone aggregate) as in in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified & directed .
M&L 25 mm thick damp proof course in CM (1:2:4) type B0 (using 20mm gradded crushed stone aggregate) mixed with integral water proofing compound @3% by weight of cement with nessery formwork, and and applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sqm of surface area
M&L for writing letters or figures (Block, Roman, Itallic or Indian) exc 30cm high of any colour and paints including necessary scaffoldings at any height all as specified and directed.
S&F SS 304 grade metal letters of height 200mm with PU paint to match the logo colours, mirror polish finish, anti rust and including necesssary arrangements to fixing in walls, using scaffoldings at any height all as specified and directed.
S&F 4mm thick panel of any type, pattern and shape aluminium composite panel (ACP), aluminium thickness of 0.5mm, front side finish of aluminum roll coated with plain / coloured / wooden texture PE / PVDF, core material of Non-toxic polyethylene, Macromolecular lamination film, Rear side of Aluminum coated with primer and including frame work using of Fasteners, including concealed screws, nuts, bolts and other items required for connecting aluminium to aluminium / steel / wooden / ply board, Blind rivets all fixing anchors, brackets and similar attachments used in the erections, shall be of aluminium, non-magnetic stainless steel, zinc coated steel, for fixing in both internal / external wall cladding complete weather proofing sealant of a polyurethane elastic joint / structural silicone sealant / pre-formed gaskets to the Horizontal & Vertical Joints in the Aluminium cladding / facade as per manufacturer's instructions all as specified and directed. Note : 1. The unit rate quoted is deemed to be inclusive of all necessary fixing acceserries mentioned in the description of work and scaffolding works at any height for installation. 2. For payment purpose panels areas will be measured on one side only.
M&L for stainless steel grade 306 decorative designer railings, staircase, covers, sitting place, shed etc. (design and pattern as approved) made out of SS pipes mirror or wire brush finish, SS flats (plane or chequered) & SS plates cutting to desired shape ,1D Finish etc. complete with and including required cutting, notching organ welding, riding and drilling counter sunk holes, as required and bending to required shape by mechanical means in factory as per site requirement without forming wrinkles and butting and buffing / polishing fixing with necessary nut bolts and fixtures and filling the holes with mircroconcrete complete all as directed by Engineer-in-Charge Make : Jindal stainless Ltd., SAIL, TISCO, POSCO etc.
Material & Labor for point wiring (concealed type) with 1.5 sq mm, PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including rigid non-metallic PVC heavy duty conduit (ISI mark), 19/ 20 mm dia suitable size including cutting chases for conduits, sinking for concealed boxes and for concealed conduit wiring with all fittings and accessories including with and fix conecaled 1.2 mm thick pressed steel sunken box and fix conecaled 1.2 mm thick pressed steel sunken box and with including lamineted sheet cover for fixing switch socket and unsheathed (FRLSH) single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly and making good to the disturbed surfaces to match the existing surfaces complete (fill up cement in gaps, finishing with putty and apply two coats of paint, match with existing colour in disturbed surface area), as per IS specification and as specified in SSR Part-I complete for one light point / Exhaust fan / wall fan controlled by one switch, 1 way 6/10 amps, 1 module along with taking down old unserviceable point wiring including all fittings and fixtures such as switches, pendant, lamp holder, regulators, switch socket outlet, bulk head fittings, tube light fittings etc all as specified & directed . Make of Cable : Anchor / Havells / Polycab
All as per serial no.140 here-in before but for One ceiling fan by one switch & regulator
All as per serial no.140 here-in before but for One 3 pin socket point 5 Amps on independent board
All as per serial no.140 here-in before but for One 3 pin socket point 5 Amps on same board
All as per srl item no 140 here-in-before but for one socket point 15 Amp with 2.5 sq mm PVC unseathed FRLS wire along with 2.5 sq mm green colour wire as earth contuinity conductor connected to common earth dolly complete all as specified & as directed by engr-in-charge.
S&F Switch piano, flush type single pole, one way 5 Amp all as specified & as directed
S&F Switch piano, flush type single pole, one way 15 Amp all as specified & as directed
S&F socket 2/3 pin 5 Amp all as specified & as directed.
S&F socket 6/16 A 2/3 pin all as specified & as directed.
S&F stepped type electronic fan regulator 450 watt flush type on the existing phenolic laminated sheet etc all as specified & as directed. Make: Anchor, Fine, SSK
S&F ceiling rose surface bakelite 65 x 50 mm two to three terminals all as specified and as directed.
S&F in repair 20 watt LED, 4 feet long fixed on pvc square for mounting the fittings and electrically connecting with three single core 23/0.0076. PVC insulated multi strandard copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) and one for earthing all as specified and directed Make:Havells Model No :E-Lite LED Pride Plus Neo Cat pat NO : LHEXACP7IN1W020 / Osram / Philips/ Wipro.
S&F in repairs surface mounted 9/10 watts LED tube light fitting, mirror light fitting with lamp and connecting up with copper 3 core flexible cord of minimum size 0.5 sqmm all as specified and as directed. Make:- Havells Model No E-lite LED Pride Plus NEO Cat pat NO : LHEXACP7IN1W010 or in equivalent model in Wipro / Philips/ Osram.
S&F in repair MCB SP 240 volt, 40 Amps all as specified and directed.
S&F in repair MCB SP, 240 volt, 6 to 32 Amps all as specified and directed.
S&F in repair MCB SPN, 240 volt, 40 Amps all as specified and directed.
S&F sheet metal enclosures, double door, for DBs when MCBs to be used 240 volts 6 way with 200 Amps rated bus bar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection all as specified and directed.
S&F Sub main wiring in repair, with two run of 06 sqmm stranded copper conductor FRLSH wire with one run of 06 sqmm stranded copper conductor as earth continuty conductor connected to common earth dolly including PVC FR heavy duty conduit of adequate size (not less than 25 mm dia) for housing the wires for one Main DB to house SPN DB complete all as specified. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB along with taking down carefully copper/aluminum submain wiring complete including all fixtures such as MCB DBs, Meter Boxes etc Note: Mode of measurement two runs of 06 sqmm cable and one run of 06 sqmm cable with PVC conduit shall be measured as one length.
S&F in repair DB vertical type 4 way VTPN double door load line powder coated complete along with 200 Amp rated Bus bar, fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed. Note: Thimble/lugs of rating of MCCB should be used with wire for fixing in the MCB
S&F 63 Amp MCCB, 415 Volts, 16 KA, 4 pole, fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed. Note: Thimble/lugs of rating of MCCB should be used with wire for fixing in the MCB
Supply , Laying or fixing or passing through pipe LT XLPE insulated cable electric, armored, cross-sectional area, pic sheathed, heavy duty, electric cable 1100 volt grade with stranded aluminum conductor of size 2 core 10 sq mm laid in trenches/GI Pipe including providing the required excavation, returning and removal of soil all as specified and directed.
Supply and fix looping box made out from fiber of size 300X200X112mm, out door type weather proof with locking arrangement & comprising of connector MCB SPN 10 Amp, with suitable bus bar arrangements and fix on pole with and including suitable size MS clamps, MS flat iron, cable glands, nut bolts, washers etc. complete all as specified and directed.
Supply and fixing Steel tubular swaged poles type 410 SP-22 (8.5 meters long) complete with cast iron base plate, finial taper plug, bolts, nuts, screws and top cover, all as specified and including including painting external surface steel tubular poles 9 metre long any type complete and cross arm/bracket etc. with two coats of aluminum paint over a one coat of red oxide paint and unto 1.50 mtr from bottom in alternate layer black paints and alluminium paint in alternate strip up to (each strip of 30 cm) with from bottom including preparation of surface and marking pole No complete all as specified and directed.
Material and labour GI tubing 40 mm dia light grade galvanized with all connecting items (like suitable size of clamps, angle, nut & bolts) for holding of pipe with pole all as specified and directed.
Bidder Name
Unitech Enterprises
SAHU AND SAHU CO.
Vandan Enterprises
RAJU ENTERPRISES
GANGAJAL
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .