REPAIR TO JOINERY, TILLING, SANITARY FITTINGS WORKS INSIDE MH AREA AND REPAIR TO CERTAIN B/R WORK E/M INSTALLATION AT NAMKUM UNDER GE RANCHI.

Amount

Taking down chowkats or frame with shutters (without taking off shutters from the frames) n. Exc 1.5 Sqm each, complete all as specified and directed.

All as per above item No 01 but exc1.5 Sqm but n.exc. 4 Sqm, complete all as specified and directed

Taking down shutters of any description n exc 1.00 Sqm each complete all as specified and directed

All as per above item No 03 but exc 1 Sqm & not exc 2 Sqm each

Refixing of shutter of any description exc 1 sqm and n exc 2 sqm in same opening complete all as specified and directed.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening as per specified & drawing.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame wealded/sealed to the stiles & rails with sutable PVC sheet beading and jointed togeather with solvent cement, fix in frame, complete all as specified and directed.

S&F 2nd class hardwood plain solid straight chowkats and frames wrought framed rebates on the solid, rounded or chamfered put together with glue pinned at joints supplied and fixed.

M&L hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe -290 Gde E-165

M & L cement concrete type C - 1 (1:3:6) using 20 mm graded stone aggregate as in bed blocks,fillings for holdfast etc complete all as specified and directed.

M&L 35 mm thick Plain framed, paneled shutter (three panel) with lock rail and panel of 12mm plywood commercial on both faces. The size of rail and style as per IS: 1003(Part - 1), complete all as specified and directed.

S&F 30 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides supplied and fitted to chowkats.

S & F 35mm thick 2nd class hardwood glazed and skeleton shutters of 8 panels, divided into squares with plain, chamfered or rounded, mitred & rebated sash bars and prepared to receive glass, gauze etc edges of framing plain chamfered or rounded fitted with cat and mitred beads for securing glass etc fitted to chowkats for doors, etc complete, size of member of shutter as specified in SSR Part -I, Sec 8, clause 8.20 (a). Sample of shutter can be seen in GE's office.

S&F block boards 18/19mm thick gde 2 quality, interior grade, commercial type for cupboard shutter, shelf, etc complete

S&F in 12mm thick pre-laminated particle board interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination for cupboard shutter, shelf, etc complete all as specified and directed.

S&F steel windows with side hung shutters incl projecting type hinges with one no MS flat iron 25x3 mm of appx 200mm length and two nos MS Tower bolt 150mm long and one peg stay on each leaf complete with glazing bars, dovetailed or welded complete

All as per item No 16 above but without glazing bars complete

S&F steel window, ventilators, fixed type, with glazing bars

S&F framed work as in doors or gates of angle or other section with guesset plates complete doors etc to be prepared to hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, also fastening and fixing complete.

S&F 1.00mm thick Mild steel, plain, black sheet in covering to door shutters; covering to door chowkats (frames) cut to size edges beaded if directed, holes punched;incl round headed screws, clout nails or rivets and fixed to wood or steel members, etc.,with plain 40 mm lap joints or welded/riveted seams including bending, turning up,mitred angles, stopped ends, outlets, etc. as reqd complete all as specified and directed.

S&F framed work such as grills gratings etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, barred iron doors, ladders framed, baluster walk ways, railings, framework of water tanks & similar wk conforming to Fe410-0 or Fe310-0 .

S&F Galvanised mild steel wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks etc complete all as specified and directed

S&F in repair Galvanised mild steel wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks etc complete all as specified and directed.

Hacking out old boken glass(any thickness, size, quality or description) from wooden frames/steel frames glazed with oil putty or fixed with beads complete all as specified and directed.

S& F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. Exc 0.5 Sqm in each pane.

S&F 3 mm thick frosted glass pin head type and glazing with oil putty in squares exc 0.5 Sqm in each pane etc complete all as spd and directed.

S&F Aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long.

S&F in repair Aluminium anodised barrel tower bolts of extruded section and fixed 125 mm long.

S&F Aluminium anodised handles of extruded section and fixed 125 mm long.

S&F in repair Aluminium anodised handles of extruded section and fixed 125 mm long.

S&F 100 mm size Butt hinges medium weight cold rolled mild steel and fixed.

S&F 75 mm size Butt hinges medium weight cold rolled mild steel and fixed.

S&F in repair 100 mm size Butt hinges medium weight cold rolled mild steel and fixed.

S&F 100mm long hasp & staple aluminium anodised wire type, incl bolt to hinge plate and fixed with screw complete all as specified and directed.

S&F small fitings of 2nd class hard wood such as brackets of any type, latch and hing block shape door, window stops and the like incl all necessary labours articles not exc 200 cucm each.

S&F 250 mm long mild steel sliding door bolt with hasp, staple( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed.

MS ordinary rat tail rod pattern springs 200mm, including roller and roller plate complete all as specified and directed.

M&L preparation of new wooden surface any description over 10 cm width or girth and applying two coat synthetic enamel paint over a coat pink primer complete all as specified and directed.

M&L preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete.

Taking down cement plaster on wall of any description incl racking out joints hacking for key and scrubbing down with water complete all as specified and directed

Demolition of brick work build in cement mortar including all quoins, arches, pillars, complete all as specified and directed.

M&L brick work with sub class 'B' brick straight or curved on plan exc 6m means radius build in cement mortar 1:6, complete all as specified and directed.

All as per item No 42 but except bricks

M & L rendering 10 mm thick in cement mortar 1:4 on chajjas/lintel etc and finished even and fair without using extra cement in patches.

M & L rendering 15 mm thick in CM 1:6 in on surface of walls and finished even and fair (without using extra cement) in patches.

Dismantling of wall/ceiling boards (fibre, pulp, insulation, etc) of any type including cover fillets.

M&L for providing aluminium snap Grid frame work for false ceiling with of size 605X605 mm ,using Main and cross tee of size 36.5mmX25mmX1.4mm,weighing 0.24 kg/RM and 23.5mmX26.4mmX1.4mm weighing 0.191Kg/RM respectively. the snap grid shall be supported at end all along the wall with aluminium anodised angle of size 40mmX25mmX2mm weighing 0.36Kg/RM. The snap grid shall be fixed to ceiling supporting hangers consisting of 2mm dia MS wire/GI wire, J bolts, nuts and washers as per manufacturer's complete all as specified and directed

M&L 4mm thick non asbestos fibre designer cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws.

M & L preparation of new plastered surfaces of walls/chajja/lintel and applying two coats of cement based paint white or tinted over a coat of alkali resistant primer complete all as specified and directed

M & L preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified & directed

M&L three coat of white wash on newly prepared surfaces on wall , etc complete all as specified and directed

M&L for preparation of new plastered wall surface applying two coat of "Birla White wall care putty"or" JK Wall Care Putty "to make the entire surface free from undulations complete all as specified and directed

M&L Preparing new putty wall surfaces, priming plastered and other surfaces with alkali resistant primer and applying two coats of oil bound distemper of any shade on walls surfaces

Demoliton of cement concrete in ground floor paving n exc 15cm thickness ( below or above ground level ) complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed

M&L Cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base etc complete all as specified and directed

M&L Cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in levelling course, coping, window cill etc complete all as specified and directed

M & L 40 mm thick PCC type B - 1 1:2:4 using 20 mm graded stone aggregate as in flooring finish even & smooth using extra cement complete all as specified and directed

M&L 75 mm thick PCC 1:3:6 type C-2 using 20mm graded stone aggregate including finished surface even & fair without using extra cement as in plinth protection including necessary form work of edge all as specified and directed. Note: 10mm wide and 75mm deep joints shall be made at 3 mtr intervel and at each corner and the same shall be filled with using bitumen 85/25 and sand in the ratio 1:3.

M&L non skid coloured ceramic tiles 300 x300 x7mm thick in floors etc over & including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed

M&L coloured ceramic glazed tiles 375x250x7mm/ 450x300x7mm thick as in dado/skirting etc including 10 mm thick rendering in CM 1:3, set & jointed in neat cement slurry & pointed in white or coloured cement slurry & pointed in white or coloured cement.

M&L joint free non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc over & including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed

M&L for joint free non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in, skirting, dado, etc incl 10mm thick rendering in CM 1:3, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed.

M&L joint free non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc over & including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed

M&L 8-10mm thick Light coloured vitrified ceramic tiles of size in floors, not exceeding 0.36 sqm set & jointed in neat cement slurry and pointed in coloured cement to match over & including 20mm thick screed bed in CM 1:4 complete all as specified & directed.

All as per Item No 65 but as in Skirting with 10mm thick rendering in CM 1:3

M&L Machine pressed precast concrete interlocking paver block 60mm thick with grey cement and pigment any shape and size confirming to IS 15658-2006 of M-35 grade complete all as specified and directed

All as per item No 67 but except paver block

M&L Sand filling under floors or in foundations including watering and consolidation

M&L antifungal Chequered cement concrete tiles 30cm x 30cm x 22 to 25mm thick with grey cement and pigment over & including 20mm thick screed bed in CM 1:6, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed

M&L machine cut kota stone slab flooring 18-20mm thick over & including 20mm screed base in CM 1: 4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed

All as per Item No 71 above but as in Skirting with 10mm thick rendering in CM 1:3

Demolition of cement concrete reinforced as in chullah hoods , shelves, cover slab and plate form etc complete all as specified and directed

M&L RCC as in kitchen platform, shelves, cover slab type BO 1:2:4 (12.5 mm graded aggregate) including necessary form work complete all as specified and directed

S&F TMT bars 8 to 10mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns, hooking and binding with and including mils steel wire (annealed) not less than 0.9 mm dia quality conforming to Fe-410-S or F-410-0 etc complete all as specified and directed.

S&F in repair 500 Ltrs capacity rotational moulded polythene water storage tanks in two layer cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I

S&F in repair 1000 Ltrs capacity rotational moulded polythene water storage tanks in two layer cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed in SSR Pt-I

S&F in repair 2000 Ltrs capacity rotational moulded polythene water storage tanks in two layer cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed in SSR Pt-I

S&F in repair PVC ball valve 20mm dia with epoxy coateed aluminium rod and high density ball (minium weight 210 gms) complete all as specified and directed

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washers, waste coupling, waste pipe incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as directed and specifed .

Taking up or steel tubing & connections including cleaning for refixing bore of pipe 15mm etc complete all as specified and directed

All as per above item No 81 but 20mm bore

S&F tubes medium grade galvanised with all fittings & fixed complete to walls & ceiling or laid in floors 15mm bore etc complete all as specified and directed

All as per above item No 83 but 20mm bore

Refixing old galvanised steel tubes & connections on wall 15 mm bore complete all as specified and directed .

All as per above item No 85 but 20mm bore

S&F in repair for Gun-metal, globe or gate valves 20mm, with iron wheel head, screwed both ends for iron pipe etc comlete all as specified and directed .

S&F in repair for Gun-metal, globe or gate valves 15mm, with iron wheel head, screwed both ends for iron pipe etc comlete all as specified and directed .

S&F in repair bib tap 15mm fancy type of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed .

S&F in repair bib tap 15mm chromium plated fancy type long shank with crutch butterfly handle, screw down screwed for iron pipe or for brass ferrule etc complete all as specified and directed .

S&F in repair stop valve 15mm chromium plated screw down, high pressure with crutch or butterfly handle, screwed fboth ends for or iron pipe or for unions and fixed complete all as specified and directed

All as per above Item 92 but two way angle cock

S&F in repairs IVC hand shower (Health faucet) with 8mm dia, 01 (one) metre long PVC tube and wall hook with plastic body complete all as specified & directed.

S&F in repairs15mm dia pillar tap cost copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without letered "Hot or Cold" high pressure with long screwed shanks & fly nuts screwed for iron pipe etc complete all as specified and directed

S&F in repairs 15 mm dia concealed type stop valve fancy type chromium plated etc complete all as specified and directed

S&F in repair Brass chromium plated shower rose 125mm size fancy type with or without swelves joint fixed to iron pipe etc complete all as specified and directed

S&F in repair Vitreous china wash down water closet pan ( pedestal pattern), white (excluding fixing bolt, flushing cistern and flush pipe) but including P or S trap, sheet cover of white colour complete all as directed and specified.

S&F in repair MS conduit curtain rod with PVC coating fancy type drafry rod 20mm dia of any colour as approved design and fixed to wall complete all as specified and directed.

S&F fancy type sofia brakcet for the curtain rod (suitable for 20mm dia curtain rod) of any approved colour and design all as spd and directed.

S&F in repair vitreous china squatting pan, Orrissa pattern size 580x440mm white with PVC 'P' or 'S' trap with integral foot rest of any pattern incl connection to trap & to flushing pipe, antisyphonage pipe etc making good to floor complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white, flat back, size 550x400 mm incl chain and plug and porcelain stopper, brackets, waste pipe incl cutting for and pinning in ends of brackets or erecting stand including dismantling

S&F in repair PVC connection 450mm long with two PTMT nuts (Prayag)

S&F in repair CP brass towel rail, 20mm dia, D type,60cm long complete all as specified and directed.

S&F in repair PVC flushing cistern 10 ltr capacity including bracket fixed to wall & flush pipe complete all as specified and directed, Make-Parryware-slimline/ Commander-water bird

S&F in repair 32mm bore waste coupling of PTMT (half or full threaded) (Min wt 45 gms) Complete.

S&F in repair 32mm bore low density polyethylene (LDPE) pipes of pressure rating 6kgf/sqcm complete all as specified and directed.

M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S/F in repair PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joint laid in trenches complete all as specified and directed.

S/F in repair PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joint laid in trenches complete all as specified and directed.

S/F in repair PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joint fixed to wall complete all as specified and directed.

S/F PVC(SWR) 110 mm bends any radius.

S&F PVC (SWR) vent cowl 110mm bore

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F anodised aluminium door shutters, aluminium shutters, aluminium section weighing 0.55 Kg/m including necessary joining joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, anodised alumnium snap beading, screws etc. complete all as specified and directed.

S & F Anodised aluminium window and ventilator shutters, side hung type or two or three track type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified.if use sliding tack provide all locking arrangement,rubber beading,cleat incl all fitting and fixture complete all as specified and directed.

S&F anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc. complete all as specified and directed.

M&L double action floor spring for aluminium doors hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including necessary cutting & making good to floor as per existing complete all as specified and directed.

S&F cast brass fanlight pivot with plate size 25mmx65mm and suitable for shutter of 35mm thick complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples

M&L 9mm thick Prelaminated particle board,interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with alumunium frame work.

S&F 4.00 mm thick plain Sheet glass, area exc 0.5 sqm in each pane and fixed to aluminium frame work etc complete all as specified and directed.

S&F 4.00 mm thick plain Sheet glass, area n exc 0.5 sqm in each pane and fixed to aluminium frame work complete all as specified and directed.

S&F 4 lever brass mortice lock vertical type size 65mm long complete all as specified and directed.

Taking down aluminium doors shutters only (area exc 1.0 sqm but not exc 2.0 sqm each) and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium beads & cleats of existing make and also refixing the handles & mortice locks in existing position with and including new screws including refixing the door shutters in same opening complete all as specified & directed.

Excavating in post holes (or similar holes) each not exc 0.5 cu.m, getting out, retuning, filling in and ramming earth broken rubble mixed with earth around, in layers not exceeding 25 cm in soft / loose soil.

M&L for PCC 1:3:6 type D-2 using 40 mm graded stone as in foundation , filling and mass concrete.

S&F Mild steel framed work as in posts and struts in fencing including cutting tops to shape as directed, drilled holes,notching for wire etc flats iron fillets (for securing wire mesh etc ) including all necessary drilling,bolting or fiveing etc, and similar work confirming to Fe-290 GdeE -165.

Supply only 4 mm dia galvanised iron chain link fencing of size 100x100 mm x4mm dia.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire.

M&L, MS TMT bars 10 mm dia and over cut to length, bent to shape reqd incl cranking bending etc and binding with MS wire (annealed) not less than 0.9 mm dia as in chain link fencing fixing.

S&F mild steel screw bolts (machine made ) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagoanl or sqare nut, n.exc 5cm long of diameter of shanks 11 to 15 mm.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting put soft/loose soil.

Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc 15cm thick (below or above ground level).

M&L hardcore of gauge n.exc 63 mm deposited spread and levelled in layers n.exc 15 cm thick watered and rammed to a true surface.

M&L 100mm thick PCC type C2 1:2:4 (using 40mm graded stone agg) as in floor finished surface with even and fair without using extra cement complete.

M&L laying for 40 mm nominal size of graded coarse aggregate complete all as specified.

M&L 75mm thick PCC type C2 1:3:6 (using 40mm graded stone agg) as in plinth protection/Path/floor finishing surface of concrete topping even and fair without using extra cement complete.

M&L 40 mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in flooring and finised the concrete surfaces even and smooth using extra cement, complete all as specified and directed.

M&L 25 mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in flooring and finised the concrete surfaces even and smooth using extra cement, complete all as specified and directed.

S&F Glass dividing strips, 3 mm thick and 38 mm wide inserted in position

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed.

Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges as in roof covering.

S&F prepainted galvalum alm zink coating GI based corrugated/ semi - corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering fixed with coach screw as per manufacturers instrution complete all as specified and directed.

Cutting holes in brickwalls in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required not exc. half brick

S&F Flat iron / angle iron for hold fast to fixed door/window.

M&L Pressed steel frames 125 x 60 mm size of frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

Dismantling timber scantling 40 sqcm and over in section in any position in unframed work complete all as specified and directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates

Dismantling floor, hearth or wall tiling, including cement mortar bedding (but not backing ) removing serviciable tile to store & rubbish off the permisses.

M&L for 15mm thick screed bed or bedding layer of mortar in CM (1:6) for lying floor finishes and surface fair and even.

M&L for 10mm thick rendering in CM (1:4) for lying on vertical surface to receiving wall tiles and surface finished even & fair.

M&L Non - skid Ceramic jointless tiles of any colour/shade 7 to 8 mm thick area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles complete all as specified and directed.

M&L, glazed ceramic coloured tiles of size 350 X 250 X 7mm/ 450 x 350 x 7 mm thick as in walls etc set and jointed in neat cement slurry and pointed in colour cement to match the tiles.

M&L Steel window with side hung shutter including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dove tailed or welded (including two nos tower bolts 125mm in each leaf and one nos MS flate iron 25x 3mm handle in each leaf.

S&F powder coated anodised/aluminium frame of size 65mm x 38mm x 1.00 thick or appropriate section as directed including with frame standard section for sliding type windows /ventilatorss with one or more rebates including joining cleats, beading, handle with locking arrangement, rubber gasket for fixing etc complete with and including 5.5 mm thick tinted glass n.exc 1 Sqm each panes (window of frame 3 tract wt not less than 0.50kg/RM and shutter having wt not less 0.45kg/RM) all as specified and directed

M&L 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides covered with decorative face veneer with lipping / frame to match.

Taking down cement plaster of any description on brick or stone walls/concrete surface etc. including racking out joints, hacking for key, scrubbing down with water etc.

M&L 15mm thick rendering on fair faces of brick work/concrete surface in CM (1:6) surface finished even & smooth complete.

M&L 15mm thick rendering on fair faces of brick work/concrete surface in CM (1:4) surface finished even & fair complete all as specified.

M&L 10mm thick rendering on fair faces of brick work/concrete surface in CM (1:4) surface finished fair & even on ceiling complete all as specified.

M&L preparation of new surface of wall and applying three coats of white wash.

All as per Item No. 163 above but on ceiling surfaces.

M&L one coat White wash on old plastered or concrete surface including prepration of surface

M & L preparation of new plastered surface of wall and applying two coats of cement base paint.

M & L preparation of old surface of wall and applying one coat of cement base paint.

M&L, applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of newly steel surfaces of any description over 10cm width or girth not otherwise described.

M&L preparation of old wood and wood based surfaces of any description over 10 cm width or girth & applying one coat of synthetic enamel paint of any tint, complete all as specified and directed..

M&L for painting steel and iron surfaces over 10cms width or girth not otherwise described with one coat of synthetic enamel paint incl preparation of old painted surfaces complete all as specified and directed.

M&L 4mm thick Non asbestos fibre designer cement building boards fixed or laid/inserted to timber/GI/Aluminium framework with screws .

Preparation of newly plaster surface of wall and applying two coats of cement base paint over one coat of cement primer complete all as specified and directed.

Materials & labour for prepration of newely plastered surfacea and finishing the surfaces of wall with wall putty and applying two coat of Oil Bound distemper over one Coat of Cement Primer of, any colour, complete all as specified & directed.

Materials & labour for complete removal of existing treatmemt and finishing the surfaces of wall with two coats of cement base paint of, any colour, complete all as specified & directed.

M&L complete removal of existing treatment over wall and applying two coats of distemper oil emulsion over 3mm thick wall care putty complete all as specified and directed.

M&L Preparing old decorated surfaces, plastered or unplastered and applying one coat of white wash on buildings complete all as specified and directed.

All as per item No. 176 above but on ceiling.

Demolition of Cement concrete of any description and in any position not otherwise specifically provided for

M&L for 100 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of floor complete all as specified and directed

M & L Sand filling under floors including watering and consolidation

M&L Machine pressed precast concrete coloured Inter locking paver block of any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment over sand cushion & laid over sub base all as specified and directed.

M&L PCC 1:3:6 type C-1 using 20 mm grade stone aggregate as in benching, coping, kerbs etc

Dismantling floor , hearth or wall tiling includiing cement mortar bedding , removing serviceable tiles to store and rubbish off the premises

Material & labour Non skid coloured Jointfree tiles 7-8 mm thick area of each tile exc 0.11 sqm but not exc 0.18 sqm,on vertical surface such as skirting, dado etc. set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor over and including 10mm thick rendering in CM (1:4) complete all as specified & directed.

Material & labour for 25 mm thick PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in sub base of floor complete all as specified & directed.

Material & labour for chequered cement concrete tiles 20cmx20cmx20-25mm thick set, jointed and pointed in neat cement slurry in floor over and including 15mm thick screed bed in CM (1:6) complete all as specified & directed.

Material & labour for Shingle filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled , and blinded with earth and rammed including watering complete all as specified and directed.

Hacking out old broken glass (any thickness), size quality or description from metal frames or wooden frames incl punching or drilling out glazing pins/springs clips and providing and fixing new ones glazed with putty or fixed with beads complete all as specified and directed .

Supply & fix in repair Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples, complete all as specified and directed .

M/S RAMOTAR SAHU

M/S Sahib N Sahiba Enterprises

BUILDCON ENTERPRISES

M K Enterprises

BHARATI ENTERPRISES

J K CONSTRUCTION

M/S Manoj Kumar Sinha

M/S MSD & Associate