Construction of 50 Bedded Pre-fabricated Hospital under ECRP phase II at Kamjong District,Manipur

Amount

EARTH WORKS

Earth work in excavation in foundation trenches or drains i/c dressing of sides & ramming of bottoms lift upto 1.5 m i/c getting out the excavated soil & disposal of surplus excavated soil as directed within a lead of 50 m.

Loose/Soft soil

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20 cm in depth consolidating each deposited layer cum by ramming and watering lead upto 50 m and lift upto 1.5 m

Filling in plinth with sandy soil under floors i/c watering, ramming, consolidating & dressing complete.

CONCRETE WORKS:

Providing and laying cement concrete in foundation & plinth excluding the cost of centering & shuttering.

1:4:8 (1 Cement:4 coarse sand:8 graded stone aggregate: 40 mm nominal size)

Providing & laying damp-proof course 50 mm thick with cement concrete

cement concrete 1 : 2 : 4 (1 cement :2 coarse sand : 4 graded stone aggregate 12.5mm nominal size)

Providing plinth protection 50 mm thick in cement concrete 1:3:6 (1 cement:3 coarse sand:6 graded stone aggrt. of 20 mm nominal size) i/c finishing the top surface of concrete smooth.

R.C.C. Work

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work upto plinth level

1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :

1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

R.C.C. work in beams, suspended floors, roofs having slope uptp 15o landings, balconies, shelves, chajjas, lintels, band, plain window sills, staircases and spiral staircases above plinth level upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with

1 : 1 .5: 3 (1 cement :1.5 coarse sand :3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete.

Thermo-Mechanically Treated bars

FORM WORK

Providing formwork i/c centering & shuttering so as to give a rough finish strutting & propping etc. height of propping and centering below supportingfloor to ceiling not exceeding 4 m. & removal for the same for in-situ reinforced and plain concrete work in : [Using 12mm shuttering ply]

Foundations, footings, bases of columns, etc. for mass concrete

Columns, pillars, posts and struts (Square, rectangular or polygonal in plan).

Sides and soffits of beams, beam launching, cantilever girders, bressumers and lintel not exceeding 1m in depth.

Flat surface such as suspended floors, roofs, landings, and the like floors etc. upto 200 mm in thickness

BRICK WORKS:

2nd class (local first class) brick work in foundation & plinth in cement mortar 1:4 (1 cement : 4 coarse sand)

Extra for brick work in superstructure above plinth level upto 1st floor level

Half brick masonry 2nd class (local first class) in cement mortar 1:4(1 cement : 4 coarse sand) in superstructure.

Extra for half brick masonry in superstructure, above plinth level (floor one level) to floor two level

Brick edging (brick laid on edge) in plinth protection with 2nd class brick local first class)i/c grouting with cement mortar 1:4(1 cement:4 fine sand).

WOOD WORKS

Providing wood works in frames of doors, windows, clerestory windows & other frames, wrought frameed & fixed in possition

Local best quality Teak

P/F 38 mm. thick panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows i/c bright finished or black enamelled M.S. Iron butt hinges with necessary screws.

a) Local best quality Teak Wood

Providing and fixing brass sliding bolts bright finished or black enamelled with nuts & screws etc.

Providing & fixing brass brass Tower bolts (barrel type) with screws etc. complete.

Providing & fixing brass handles with necessary screws etc. complete.

Providing and fixing 20mm plank as eave board with

Uningthou wood

STEEL WORKS:

Steel work in single sections, i/c cutting, hoisting, fixing in position & applying a priming coat of red lead paint

In M.S. Flat/Plate

Extra for providing and fixing wind ties of 40x 6 mm flat iron section.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing nd making curvature ( wherever required) and fitting the same with necessary stainless steel.

FLOORING:

20 mm thick cement plaster skirting (upto 30cm height) with cement mortar 1:3 (1 cement:3 coarse sand) finished with a floating coat of neat cement i/c. rounding of junctions with floors.

Providing and laying rectified ( Non-skid) Glazed Ceramic floor tiles 300x300 mm or more ( thickness to be specified by the manufacture) of 1st quality conforming to IS: 15622 of approved make in all clours, shades, except white, Ivory, Grey, Fume Red, Brown, laid on 20 mm thick Cement Motar 1:4 ( 1 Cement: 4 C/S) includng pointing the joints with white cement and matching pigments etc., complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% nad conforming to IS:15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete.

Size of tile 600x600 mm (Single Charged)

Branded

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08% and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of stepts , over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete

Sizes of Tiles 600x600 mm (Double charged)

Branded

ROOFING AND CEILING:

Providing and fixing ceiling at all hieghts including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/sqm (both side inclusive) as per IS: 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm flanges od 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs 230 mm interval, including fixing of gypsum board to

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095 - Part 1

Trapzodial Profile Pre-painted profile sheet roofing of approved brand DYNA Roof or equivalent with selt drilling screws of 68mm long Xylon coated screws with PVC washer & cap complete, excluding the coat of purlinsr & trusses

Pre-painted Galvalume Sheet ( PPGL)

i) Profile sheet 0.50 mm /4.2 kgs/sqm

Trapzodial Pre-painted Profile Sheet for Ridges Gutter or Valley 610 mm wide of approved brand DYNA Roof or equivalent fixed with selt drilling screws of 68mm long Xylon coated screws with PVC washer & caps completed, excluding the coat of purlins rafters & trusses.

Pre-painted Galvalume Sheet (PPGL)

i) Profile sheet 0.40 mm /3.2 kgs/sqm

Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a coat of approved steel primer red oxide zinc chrome primer conforming to IS:2074-1979) welded and bolted including special shape washer etc. complete.

Electric resistant welded welded tube (Conforming to IS : 1611- 1979 ).

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade 1 Type II in panelling fixed in aluminium doors, windows shutters and partition frames with C.P brass/stainless steel screws etc. complete as par architectural drawing and directions of engineer-in-charge.

Pre-laminated particle board with decorative lamination on both

Providing and fixing 5mm colour coated structural glazing in aluminium door, window, ventilator shutters and partitions etc.with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge including cost of aluminuim frame work and sealant in between frame and wall joints With structural glass panes of 5.5mm thickness

Steel glazed windows and ventilators of standard rolled steel section mitred and welded with 15 x 3 mm lugs 10 cm long with steel plugs embedded in cement concrete block 15 x 10 x 10 cm of 1:3:6 ( 1 cement: 3 c/sand: 6 stone aggregate 20 mm nominal size) or wooden plugs and screws of rawl plugs and screws or with fixing clips complete including applying a priming coat of approved steel primer excluding cost of metal beadings and other fittings except necessary hings or pivots as required.

Ready made steel windows ( side hung)

FINISHING:

12 mm cement plaster 1:4 (1 cement:4 coarse sand).

15 mm cement plaster 1:4 (1 cement:4 coarse sand).

6 mm cement plaster 1:4 (1 cement:4 coarse sand).

Distempering (two or more coats) with oil bound washable distemper of approved quality on new work i/c priming coat to hive an even shade.

Finishing walls with weather shield paint of approved quality on new work ( three or more coats) to give even shade.

Applying ready mixed priming coat pink primer of approved quality on wood work.

Providing and applying plaster of paris putty of 2 mm thickness over plaster surface to prepare the surface even and smooth complete.

Painting (two or more coats) with synthetic enamel paint of approved quality of black or chocolate colour on wood work to give an even shade.

Painting (two or more coats) with synthetic enamel paint of approved quality of black or chocolate colour steel work to give an even shade.

Providing & fixing 18mm thick Cement fibre Board cladding on both side of MS frame with frame work for partitions/ wall lining etc. made of 50x50x1.6 mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to centre both ways (vertically & horizontally) or at required spacing near opening, with necessary welding at junctions and fixing the frame to wall/ ceiling/ floors with steel dash fasteners of 8 mm dia, 75 mm long bolt, including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer etc. complete, all as per direction of Engineer-in-charge.

SH:- EXTERNAL SERVICES

Drain

Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms lift upto 1.5M including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50M (a)Hard/dense soil

Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering

(a) 1 : 4 : 8 ( 1 cement : 4 c/sand : 8 graded stone aggregate. 40mm. nominal size)

Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering

(b)1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Half brick mansonry 2nd class (local 1st class) in cement mortar 1:4 ( 1 cement : 4 c/sand ) in superstructure.

12 mm cement plaster 1:4 (1 cement:4 coarse sand).

Plinth Protection

Providing under layer for plinth protection of 75 mm thick rammed & consolidated & grouted with fine sand including preparation of ground.

Providing plinth protection 50 mm thick in cement concrete 1:3:6 (1 c: 3 c/sand: 6 graded stone aggregate of 20 mm nominal size) i/c finishing the top surface of concrete smooth.

Interlocking Paver Block

Filling in plinth with sandy soil under floors including watering ramming, consolidating and dressing complete.

Providing and laying 80 mm thick factory made cement concrete interlocking paver block (Rubber Moulded) of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design / shape laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand etc. all complete as per the direction of the Engineer-in-charge.

SH:- LAND DEVELOPMENT

Excavation in Hilly Area in the Ordinary Rock not required blasting by mechanical means including cutting and trimming of slopes and disposal of cut materials with all lift and lead upto 50 metres.

SH:- WATER SUPPLY AND SANITARY INSTALLATION

EARTH WORK :

Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms lift upto 1.5 metres including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres.

Loose/Soft Soil

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering lead upto 50 metres lift upto 1.5 metre.

P.C.C WORK :

Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering in

1:3:6( 1 cement:3 coarse sand:6 graded stone aggregate 40mm nominal size)

1:4:8( 1 cement:4 coarse sand:8 graded stone aggregate 40mm nominal size)

FORM WORK:

Providing form works i/c centering and shuttering so as to give a rough finish, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for in-situ reinforced concrete and plain concrete work in

Foundations, footings bases of columns etc. for mass concrete.

Suspended floors, roofs, landing, balconies and access platform.

1) floors etc. upto 200 mm in thickness

RCC WORK:

Reinforced cement concrete work in suspended floors,roofs landing, shelves & their supports balconies,lintels, beams, plinth beams, girders, bressumers and cantilevers upto floor two level i/c finishing and plastering the exposed surface with cement mortar 1:3 (1 cement:3 fine sand) of thickness not exceeding 6mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement.

1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size).

Reinforcement for R.C.C. work i/c. bending, binding and placing in position complete.

Thermo-Mechanically Treated bars

PRECAST:

Providing and fixing upto floor two level pre-cast reinforced cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) i/c finishing and plastering the exposed surface with cement mortar 1:3 (1 cement: 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface, centering, shuttering but excluding the cost of reinforcement in,)

String courses, copings, bed plates, ancho rblocks, plain window sills and the like.

Brickworks:

2nd class (local first class) brick work in foundation and plinth in cement mortar 1:4 (1 cement: 4 fine sand)

Half brick masonry 2nd class (local 1st class) in cement mortar 1:4 (1 cement: 4 coarse sand) in superstructure.

Honeycomb brick work (75 mm) thick with first class brick in cement mortar 1:4 (1 cement: 4 coarse sand)

Flooring:

40 mm cement concrete flooring 1:2:4 (1 cement: 2 coarse sand:4 stone aggregate 20 mm & down gauge) finished with a floating coat of neat cement.

15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.

Supplying and fixing C.I. Cover with frame (for manhole and chambers)

600x450 mm rectangular C.I. Cover (light duty) 23 kg

SANITARY INSTALLATION

Providing and fixing white vitreous china pedestal type (Uropean type/wash down type) water closet pan.

P/F 8mm dia C.P./SS Jet with flexible tube upto 1 metre long with triangular plate to Eure opean type W.C. of quality and make as approved by E ngineer-in-charge

P/FP.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all.

10 litre capacity -white

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete

White solid plasticseat with lid.

Providing and fixing white vitreous china laboratory sink ( indian make) i/c making all connection excluding cost of fitting.

with overflow

P/F white vitreous china wash basin i/c making all connections but excluding the cost of fittings

Providing and fixing grating of approved quality for Nahni trap.

Stainless steel

100 mm nominal diameter

P/F P.V.C. waste pipe for sink or wash basin i/c P.V.C. waste fittings complete.

Flexible pipe

32mm dia.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete fixed to wooden cleats with C.P. brass screws

Providing and fixing 600x20 mm C.P. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screws. (Hook type)

Providing and fixing liquid soap container of glass with C.P. lid and brackets fixed cleats with C.P. brass screws.

Providing and fixing UPVC soil, waste, rain water and vent pipes including all requisite fittings, jointing of pipes & fitting with solvent cement, tenching, refilling & testing of joints complete as per direction of Engineer in charge.

75 mm dia

110 mm dia

Providing and fixing PVC traps with 100 mm inlet and 75mm outlet of self cleaning design with screwed down of hinged gratting with or without vent arm complete i/c cost of cutting and the making good the walls and floors.

Water Supply

Providing and fixing G.I. pipes complete with G.I. fittings and clamps i/c cutting and making good the walls etc. (Internal work).

15 mm diameter

20 mm diameter

25 mm diameter

Providing and fixing GI pipes complete with GI fittings i/c trenching and refilling etc. (external work).

25 mm diameter

Providing and fixing bib cock of superior quality

15 mm diameter

Providing and fixing brass stop cock of superior quality.

15 mm diameter

Providing and fixing brass full way G.M valve with CI wheel of superior quality.

25 mm diameter

Providing and fixing lead connection pipe with brass unions.

15 mm diameter

20 mm diameter

ProvidingandfixingC.P.brassshowerrosewith12.5mmor19mm

100 mm diameter

Providing and fixing WATER STORAGE TANKS (Sintex) with 400 mm diameter nominal base G.I. overflow tube 25 mm nominal G.I. inlet and 15 mm nominal G.I. outlet tube i/c hoisting a height of 10 m above ground level.

1500 litres net capacity storage tanks

SH:- IEI

COPPER WIRING IN PVC CONDUIT.

Wiring for light point / Fan point / Exhaust Fan point / Call bell point with 1.5 mm. FR PVC insulated copper conductor single core cable in surface / recessed steel conduit with modular type switch modular plate, suitable G.I. box and earthing the point with 1.5 mm 2 FR PVC insluted copper conductor single core cable etc., as reqd.

Group A

Group B

Group C

Wiring for light pt/power plug with 4x4mm2 FR pvc ins. Cu.cond.s/c cable in surface /recessed steel conduit alongwith 2 no. 4mm2 FR pvc.ins.Cu.cond. s/c cable for loop earthing etc.as reqd.

Wiring for circuit/ Sub-main wiring along with earth wire with (the following sizes) of FR PVC insulated copper conductor single core cable in surface / recessed steel. conduit etc. as reqd.

2x2.5mm2+1x2.5mm2 earth wire

2x4mm2+1x4mm2 earth wire

2x6 mm2+1x6mm2 earth wire

Telephone Wiring in existing conduit

Supplying and drawing (following pair) 0.5 FR PVC insulated copper conductor unarmoured telephone cable in the existing surface/recessed steel/PVC conduit as reqd

TV Cable in existing conduit

Supply and drawing Co-Axial TV cable RG-6 grade 0.7mm solid copper conductor PE insulated shielded with file tinned copper braid and protected in PVC sheath in existing surface/recessed steel/PVC conduit as reqd

S/F (following Modular type switch/socket) on the existing switch box i/c connection etc.as reqd.

5/6 amps. Switch

15/16 amp.s switch

3 pin 5/6 amps.socket outlet

6 pin 15/16 amps.socket outlet

Supplying & fixing stepped type electronic fan regulator on the existing modular plate switch box i/c connection but excluding modular plate etc. as reqd.

S/F (following size/modular switch plate base and cover plate for modular switch in recess SSS as reqd.

1 or 2 module (75mmx75mm)

6 module

8 module

12 module

S/F 3 pin amp ceiling rose on the existing junction box/wooden box i/c connection etc. reqd.

Providing and Fixings (following capacity TP & N) dis-connection fuse switch unit inside the existing cubicle panel board with ISI marks HRC fuses including drilling holes in the cubicle panel board, making connection as reqd.

400 amp. T.P. & N

Providing and fixing (following rating and breaking capacity) MCCB in existing cubicle panel board including drilling holes in cubicle panel & making connection as reqd

4 Pole MCCB 400 amp 35 KA

S/F (following way) single door pole & neutral, sheet MCCB distribution board, 240V on surface/recessed complete with tinned Cu.bus bar neutral bus bar, earth bar, din bar detachable gland plate, interconnection, phosphatized and power painted i/c earthing etc.as reqd. (But without MCB/RCCB/Isolator)

12 Way Double door

S/F (following way) single door pole & neutral, sheet MCCB distribution board, 240V on surface/recessed complete with tinned Cu.bus bar neutral bus bar, earth bar, din bar detachable gland plate, interconnection, phosphatized and power painted i/c earthing etc.as reqd. (But without MCB/RCCB/Isolator)

S/F 5 amp. to 32 amp.rating 230V 'B' series MCB for lighting and other load of (following pole) in the existing MCB DB complete with connection testing and commissioning etc.as reqd.

Single pole

S/F (following rating) double pole 240V isolator in the existing MCB DB complete with connection, testing and commissioning as reqd. (a) 63 amp.

Earthing with Cu.earth plate 600mmx600mm x6mm thick i/c accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) as reqd.

Extra for using salt and charcoal for G.I. or Cu.plate earth electrode as reqd.

P/S 25mmx5mm copper strip in 40 dia pipe from earth electrode as reqd.

P/S 25mmx5mm copper strip on surface or in recessed for connection etc. as required.

S/F bus bar chamber with 4 strips Cu. Bus bar length 900mm suitable suitable for 200 amp.capacity complete with all accessories i/c connection earthing the body etc.as reqd.

S/F 48" (1200mm) A.C. ceiling fan complete with down rod, canopy, 3 (three) blades but without regulator etc as reqd. (Make Bajaj/ Usha or similar

S/F 305mm sweep exhaust fan complete with all accessories i/c connection etc as reqd

Supplying, Erection, testing and commissioning of (pre-wired) wall bracket/ceiling fittings of all sizes and shapes containing CFL/LED/W GLS lamps per fitting, complete with all accessories including connection etc. as required (havell,s /Bajaja/Phillips/Cromton).

Ceiling fitting (Surface) with 12/15 watt LED Lamp.

Supplying , Installation, testing and commissioning of LED Lamp (havell,s /Bajaja/Phillips/Cromton). including connection etc. as required.

With CFL 12/15 Watts Lamp.

Supplying, Instaling, testing and commissioning of (pre-wired) bulk head fitting with glass complete containing WCFL/W GLS lamps per fitting, complete with all accessories including connection etc. as required (havell,s /Bajaja/Phillips/Cromton).

With 7 Watts LED Lamp.

Providing of Main Pannel (External) connection

ASEM NINGTHEMJAO SINGH

M/S KIM and Sons Constructions and Equipments