SPECIAL REPAIRS TO TOILET OF LAWN NO 02, ROOF TREATMENT OF GUEST ROOM NO 01 AND ALLIED REPAIRS TO COOK HOUSE BLDG NO P-28A, PROVN OF CERTAIN MINOR WORKS IN AT PARADE ROAD AND 08 GEYSERS AT DELHI AREA IN THE AREA OF AGE BR III UNDER GE (EAST) DELHI

Amount

Demolition of cement concrete (reinforced) of any description and in any position complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facings, complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, including racking out joints, hacking for key, scrubbing down with water etc., to receive new plaster, complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5Sqm each, complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5Sqm but not exc 4Sqm each, complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar, complete all as specified and as directed.

Dismantling wall & ceiling boards (fibre, insulation etc ) or insulation boards, slabs, blankets any thickness including frame work of any type and cover fillets, complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing) & removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Dismantling steel (corrugated, semicorrugated, etc.) sheets in roof coverings, complete all as specified and as directed.

Dismantling structural steel work of any description not otherwise provided for, complete all as specified and as directed.

Taking down steel tubing and connections including cleaning for refixing or removal from site for bore of pipe 15mm, complete all as specified and as directed.

Taking down steel tubing and connections including cleaning for refixing or removal from site for bore of pipe 20mm, complete all as specified and as directed.

Taking down steel tubing and connections including cleaning for refixing or removal from site for bore of pipe 25mm, complete all as specified and as directed.

Dismantling existing water tanks of capacity exc 1000 & not exceeding 2000 ltrs lowering from its position and removal to store, complete all as specified and as directed.

Dismantling existing water tanks of capacity exc 500 & not exceeding 1000 ltrs lowering from its position and removal to store, complete all as specified and as directed.

Dismantling existing water tanks of capacity exc 250 & not exceeding 500 ltrs lowering from its position and removal to store, complete all as specified and as directed.

Excavation in post holes (or similar holes) in soft/loose soil each not exceeding 0.5 Cum getting out, returning, filling in ramming earth or broken rubble in layers not exceeding 25 cm, watering and removing of surplus soil to a distance not exc 50m and making good surfaces, complete all as specified and as directed.

Surface excavation in soft/loose soil not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified and as directed.

Excavation in trenches not exceeding 1.5mtr wide and not exceeding 1.5mtr deep and getting out complete in soft/loose soil, complete all as specified and as directed.

Returning, filling in, including spreading, leveling watering and well raming in layers not exceeding 25cms thick complete all as specified and as directed.

Removal of surplus soil to a distance not exceeding 50mtrs and depositing where directed at a level not exceeding 1.5 mtr above the starting point, complete all as specified and as directed.

Hard core of gauge not exceeding 63mm stone aggregate, deposited, spread and levelled in layers not exceeding 15 cm thick watering and ramming to a true surface, complete all as specified and directed

Plain cement concrete 1:4:8, Type D-2 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete, complete all as specified and as directed.

PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as as in window or door cills, lintels, bressumers, steps, quoins blocks (for use with masonry), string courses, copings, kneelers, apex stones, packing on the sides etc., and similar type of works including weathering, slightly rounded or chamfered angles, complete all as specified and as directed.

PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in roof kerb, mud stops, platform for OHT, etc., and similar type of works including weathering, slightly rounded or chamfered angles, complete all as specified and as directed.

Providing precast reinforced cement concrete 1:2:4 type B-0 using 12.50mm graded crushed stone aggregate in louvers and jallies, 50 mm thick (measured solid), including all mouldings but excluding frame (precast frame shall be measured separately) set in cement mortar 1:4, fixed in repairs, complete all as specified and as directed.

Precast RCC coping/post of size 600mm x 100mm x 50mm suitable for fixing of RCC Jallies in vertically & horizontally including necessary moulds and grooves as required in shape and size, complete all as specified and as directed.

RCC 1:1.5:3 Type A-1 using 20mm graded crushed stone aggregate as in roof/floor slabs supported on walls, beams and shelves etc., complete all as specified and directed.

RCC 1:1.5:3 Type A-1 using 20mm graded crushed stone aggregate as in beams, cantilevers, bressumers, lintels over 1.5mtr span and the like, complete all as specified and as directed.

Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6mtr mean radius built in cement mortar 1:6, complete all as specified and as directed.

Use and waste of form work to soffits of suspended slabs such as roof slabs, shelves etc., not exceeding 200mm thickness for fair finished concrete surfaces, complete all as specified and as directed.

Use and waste of form work to soffits and sides of floor and roof beams, beam haunchings, bressumers, lintels, cantilevers, shelves including supports and overhangs for fair finished concrete surfaces, complete all as specified and as directed.

18-20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab including 10 mm thick screed bed in cement mortar 1:4 including rounding to edge of granite as per required, complete all as specified and as directed.

Green marble 15-18 mm thick over cement screed base laid on 15 mm thick cement mortar 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab / staire case/ steps including rubbing and polishing including rounding to edge of marbale, complete all as specified and as directed.

Solid PVC door frame of size 50mm x 95mm consisting of single pattern made out of wood grain printed PVC sheet used, reinforced with MS square tube, complete all as specified and directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube, complete all as specified and directed.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail, lock on either side and gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointing together with solvent cement, supplying & fixing of frame at site, complete all as specified and as directed.

Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and as directed.

Fabrication and fixing of Modular Kitchen cabinet/ wardrobe made out of 18-19mm thick HDHMR Action Tesa or Century board, with 0.8mm thick fabric coloured laminate as approved by GE. All exposed to view sides to have edging of 0.8mm thick Rehau German inclding provision of Storage baskets and Cutlery baskets, complete all as specified and as directed.

Fabrication and fixing of Modular Kitchen cabinet/ wardrobe made out of 08-10mm thick HDHMR Action Tesa or Century board, with 0.8mm thick fabric coloured laminate on both sides as approved by GE, complete all as specified and as directed.

Mild steel butt hinges medium weight cold rolled of size 100 mm for shutters, complete all as specified and as directed.

Stainless steel soft close hinges of size 125 mm for cupboard shutters, complete all as specified and as directed.

150 mm size fancy type Brass handles cast type, complete all as specified and as directed.

125 mm size fancy type Stainless steel handles cast type, complete all as specified and as directed.

Extruded aluminium alloy handles cast type anodised of size 150mm size, complete all as specified and as directed.

150mm fancy type Brass barrel tower bolts of extruded section and fixed, complete all as specified and as directed.

Aluminium anodized 150mm size barrel tower bolt of extruded section and fixed, complete all as specified and as directed.

250 mm long aluminium alloy, anodised siding door bolts, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminiums alloy and fixed, complete all as specified and as directed.

Aluminium alloy powder coated windows including aluminum powder coated frames sliding track, bottom weighing not less than 1.015 Kg/RM, sides and top not less than 0.826 kg/RM double revated and 0.55 Kg for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter sliding type with aluminium sections as per series - A (15mm) 3 track of Jindal section numbers for sliding windows with framed shutter including aluminium allow powder coated snap type beads handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including provision of 5.5mm thick tinted glass/frosted glass of superior quality and stainless steel jali including all standard fittings, complete all as specified and as directed.

Aluminum alloy powder coated door including frame and channel of section (Door frame single groove 101.6mm x 44.45mmx2.1mm, shutter top section 47.62mm x 44.45mmx1.95mm thick, shutter bottom section 114.30mm x 44.45mm x 2.15mm thick, shutter vertical section 85mm x 44.45mm x 1.80mm thick, shutter middle section 83.50mm x 44.45mm x 2.40mm thick & glazing clips weighing not less than 0.097 kg/RM) incl shutter fixed to sliding type/openable frame and channel as directed and approved by GE and as per IS specifications including provn of 5.5mm thick tinted glass/12mm thick prelaminated particle board as required including handles, tower bolt, floor spring heavy duty “SAMRAT”, locking arrangement “GODREJ”, rubber gasket and door stopper, complete all as specified and as directed.

Aluminium alloy Powder coated standard hollow section for ventilators as per approved sample and as per IS specifications, shutters weighing 0.55 kg/m, rectangular frame of section 101.6mm x 44.45mm x 3.18mm weighing not less than 2.54Kg/RM including provision of 5.5mm thick tinted glass of superior quality including handles, tower bolt, hinges etc., as per standard fittings, complete all as specified and as directed.

Providing and fixing factory made UPVC (white colour casement (Openable) Door made of extruded profile with wall thickness of 2.3mm having profileof hollow section with multi chamber. Frame size (60mmx58mm), sash (60minx78mm), T profile having one vertical length in between two shutters of size (60mmx 74mm) glazing head (35mmx 20mm) mitered cut and fusion welded at all corners including making holes for fixing hardware and drainage of water, provision of EPDM gasket 1.2 thick galvanised steel frame (28mmx21.50mm), sash (31mmx27mm). T profile (27x17mm) to inserted in required profile frame will be fixed to wall with 8mm x 100mm long fasteners including necessary hardware viz casement (door handle,tower bolt,stopper,locking arrangemnt,and other acceessories )made of zinc alloyed (white powder coated), corner striker, secondary strikers, cylinder, transmission gear made of mild steel with multi point locking system with strikes, hinges of zinc alloyed (white powder eoated) complete all as specified and as directed. (Note: a) The unit rate quoted by contractor included cost of glass and board. Net opening will be measured for payment purpose. b) Overall net size including frame will be measured for payment purpose) Make : Okotech Aparno, H20 Solution, Fenesta or equavalent

Providing and fixing factory made UPVC white colour siliding window three track made xtruded profiles with all thickness of 2.3mm, having profile with hollow section with multi chamber. Frame size (60mm x 62mm), sash (42mmx67mm), sliding inter lock (one vertical length in each shutters) (45.5mmx28mm),glazing head (24.50mmx 16), mitered cut and fusion welded in all corners including drilling of holes for fixing hardware and drainage of water etc. including EPDM gaskets 1.2, thick glavanised steel frame (30mmx21.50mm), sash (30mmx 18 mm) profile to be inserted in required profile frase will be fixed to the wall with 8mmx100mm long fasteners including hardware vz touch lock of zinc alloyed ( white powerder coated), steel roller system , aluminium track on bottom rail two track sliding frame wool pine for sliding sash and interlock, complete all as specified and as directed. Note: a) The unit rate quoted by the contractor included cost of glass and SS wire mesh. Net openning will be measured for payment purpose. b) Overall net size including frame will be measured for payment purpose) (Make : Okotech Aparno, H20 Solution, Fenesta or equavalent.

12mm thick (toughened glass) of approved quality fixed in any position (partition, bathroom enclosure and the like)including necessary all stainless steel hardware fittings (As like frame, brackets, clips, jammers, stoppers. etc.) complete drilled for fixing with all fitting and fixture, complete all as specified and as directed.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending, spirally for hopping for columns, hooking ends, and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-S or Fe-410-0, complete all as specified and as directed.

TMT bars 5mm dia and over upto and including 10mm dia cut to length, in stirrups and spacers including cutting and bending, hooking ends & binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Rolled mild steel Fe-410w (Gde-E-250) quality 'B' Roof trusses (framed), trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces cleats etc, complete all as specified and as directed.

Structural steel work in tubular Roof trusses including special shaped washers etc., com pete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240, complete all as specified and as directed.

2mm thick fiber glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc and including dismantling of plain or corrugated sheeting any gauge thickness including Nainital or similar pattern as in roof covering, complete all as specified and as directed. complete all as specified and as directed.

Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

Providing screed bed 15mm thick on top of cleaned concrete surfaces in cement mortar 1:4 mixed with water proofing compound, including taking down exisitng roof teament with any type of membrane or cement plaster on concrete surfaces, including raking out joints, hacking for key, scrubbing down with water etc., to receive further treatment, complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately under respective item.

Supply only liquid water proofing compound, to be mixed in cement mortar or concrete as per proportion specified by manufacturer, complete all as specified and as directed.

Applying evenly a coat of bituminous primer conforming to IS- 3384 @ 0.4Ltr/Sqm. Over the primed surface, apply a coat of hot blown 85/25 penetration grade bitumen conforming to IS- 702 @ 1.2 Kg/Sqm of the surface area. Applying APP based polymeric mambrane minimum weight 3.6kg/Sqm and of minimum thickness 3mm, reiforced with polyster non woven fabric ( weight not less than 150gm/Sqm ). APP membrane will be laid by torching overlaps with a propane or butane gastorch and laid across the slope from lowest line of roof towards ridge with over laps of 75mm in length side and 100mm on the width side of membrane bonded with hot blown bitumen. Over the APP membrane finally applying a coat of Solar reflective Paint @ 0.30Ltr/Sqm complete all as specified and as directed.

4mm thick desginer ceiling board ( Make : Everest or equivalent as approved by GE) in ceiling fixed with screw as per manufactures instruction, fixed with white powder coated galvanized iron grid with 24mm wide T-section exposed flanges comprising of main runner made from 0.33 mm thick galvanized steel sheet & size T-24x32 mm and spaced at 1.2m c/c securely fixed to the structural soffits by hangers at 1.2m of GI wire 2 mm dia fixed rawl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200mm long cross tee with (double stitching) to be inter locked between main runner at 600 mm c/c to from 600 x 600 mm modules, angle along perimeter wall shall be of 0.45mm thick galvanized steel of size 19 x19 mm of white colour all as per instruction, complete all as specified and as directed.

75 mm thick Cement concrete type D 2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing including demolition of existing PCC thkness n.exc 15cm, complete all as specified and as directed.

80mm thickness, M-40 Grade Machine pressed precast concrete interlocking paver block any shape and size with grey cement and no pigment confirming to IS 15658-2006, set in floors/hardstanding/path etc laid over 50mm thick sand cushioning layer and including dismantling old interlocking tiles etc complete all as specified and as directed.

60mm thickness, M-35 Grade Machine pressed precast concrete interlocking paver block any shape and size with grey cement and no pigment confirming to IS 15658-2006, set in floors/hardstanding/path etc laid over 50mm thick sand cushioning layer, complete all as specified and as directed.

Machine cut kota stone slab 18-20 mm thick as in flooring laid over and incl cement screed bed 20 mm thick in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed.

Heavy duty external vitrified designer floor tiles, parking tiles etc., of any colour, shape and size not less than 300mm x 300mm x 8-10mm thick as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over 15 mm thick avg screed bed in cement mortar 1:4, complete all as specified and as directed.

Vitrified ceramic tiles light shade 10mm thick (square/rectangular) area of each tile not exceeding 0.36Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over 15 mm thick avg screed bed in cement mortar 1:4, complete all as specified and as directed.

All as per description of Srl item No. 70 here-in-before but light shade tiles but on vertical surface such as in skirting/dado etc over backing coat of 10mm thick rendering cement mortar (1:4), complete all as specified and as directed.

Vitrified tiles 10mm thick (square/rectangular) area of each tile exceeding 0.42Sqm tile not exceeding 1.00Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over 15 mm thick avg screed bed in cement mortar 1:4, complete all as specified and as directed.

All as per description of Srl item No. 72 here-in-before but on vertical surface such as in skirting/dado etc over backing coat of 10mm thick rendering cement mortar (1:4), complete all as specified and as directed.

Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile not exceeding 0.11Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match laid over 15 mm thick average screed bed in cement mortar 1:4, complete all as specified and as directed.

Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match laid over 15 mm thick average screed bed in cement mortar 1:4, complete all as specified and as directed.

Coloured Glazed ceramic tiles in vertical surface 450mm x 300mm x 7-8 mm thick, such as skirting, dados, etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match and over 10mm thick screed bed in cement mortar 1:4, complete all as specified and as directed.

Coloured Glazed ceramic tiles in vertical surface 600mm x 300mm x 7-8 mm thick, such as skirting, dados, etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match and over 10mm thick screed bed in cement mortar 1:4, complete all as specified and as directed.

Wall cladding tiles of size 300mm x 450 mm or 300mm x 600 mm & 8-12 mm thick on vertical surfaces of wall / concrete surface over 10mm thick cement plaster bed in 1:4 (Design & shade as per sample approved by GE), complete all as specified and as directed.

15mm thick polymer modified readymix cement based plaster Make : Ultratech (Brand name Readiplast) complying to IS-1661-1972, IS-2250-1965, IS-2402-1963) or equivalent as approved by GE, applied in ratio 1:4 as per manufacturer's instructions, on fair faces of brick masonry or concrete surfaces finished even and smooth, complete all as specified and as directed.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement, complete all as specified and as directed.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement, complete all as specified and as directed.

Rendering 5mm thick on fair faces of ceiling surfaces in cement mortar 1:3 and finished even and smooth without using extra cement, complete all as specified and as directed.

Preparation of newly plastered internal surfaces of walls/ceilings and applying a layer of Birla White/J K White wall care putty, again sand papering to make surfaces smooth and applying Two coats of interior acrylic emulsion paint premium quality over a coat of wall primer, complete all as specified and as directed.

Preparation of newly plastered external surfaces of walls and applying a layer of Birla White/J K White wall care putty, again sand papering to make surfaces smooth and applyingg Two coats of weather proofing exterior acrylic emulsion paint premium quality on wall surfaces over a coat of wall primer, complete all as specified and as directed.

Preparation of Old plastered/unplastered surfaces of walls and applying a layer of Birla White/J K White wall care putty, again sand papering thus making surface smooth and applying Two coats of exterior acrylic emulsion paint (Apex) premium quality over a coat of wall primer, complete all as specified and as directed.

Preparation of Old plaster/unplastered surfaces of walls and ceilings upto 4 storied buildingsand applying a layer of Birla White/J K White wall care putty, again sand papering thus making surface smooth and applying Two coats of Interior acrylic emulsion paint on wall surfaces over a coat of wall primer, complete all as specified and as directed.

Preparation of new steel surfaces and applying two coats of synthetic enamel paint on surfaces of any description exceeding 10 cm width or girth over a coat of red oxide, complete all as specified and as directed.

Steel water tubing galvanised 15mm bore medium grade fixed to walls, under floors and on ceiling surfaces, complete all as specified and as directed.

Steel water tubing galvanised 20 mm bore medium grade fixed to walls, under floors and on ceiling surfaces, complete all as specified and as directed.

Steel water tubing galvanised 25 mm bore medium grade fixed to walls, under floors and on ceiling surfaces, complete all as specified and as directed.

Rotational moulded polythylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 20mm bore, complete all as specified and as directed.

Rotational moulded polythylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 20mm bore, complete all as specified and as directed.

Rotational moulded polythylene water storage tanks 2000 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 20mm bore, complete all as specified and as directed.

15 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed in repairs, complete all as specified and as directed.

20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed in repairs, complete all as specified and as directed.

25mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed in repairs, complete all as specified and as directed.

15mm angle valves, fancy type chromium plated cast copper alloy, polished body screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions for 15mm bore steel tubing, fixed in repairs, complete all as specified and as directed.

15mm bore bib tap, fancy type chromimum plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions, fixed in repairs, complete all as specifed and as directed. (Make : Jaquar Cat Part No. CON-047KN/ Jaquar Cat Part No. CON-107KN/ Kohler Cat Part No. K-37341IN-4-CP.

15mm bore bib tap (long body) ,fancy type chromimum plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions, fixed in repairs, complete all as specifed and as directed. (Make : Jaquar Cat Part No. CON-047KN/ Jaquar Cat Part No. CON-107KN/ Kohler Cat Part No. K-37341IN-4-CP.

Vitreous china wash basin counter oval type size 600x425x195mm, fixed in repairs, under granite slab with all fitting and fixture, fixed in repairs, complete all as specified and as directed. Make : Jaquar/Cera/Hindware.

Vitreous chinaware table top wash hand basin (WHB) of size 595mm x 440mm x 185mm complete including 32 mm dia chromium plated waste coupling, PVC waste pipe etc., fixed in repairs, complete all as specified and as directed. Make : Jaquar/Cera/Hindware.

Vitreous china urinal (White/Off white) type size 420mm x 395mm x 635mm fixed in repairs including all fixing accessories, fixed in repairs, complete all as specified and as directed. Make : Jaquar/Cera/Hindware.

PVC connections 15mm size with PTMT nuts of length 600mm, fixed in repairs, complete all as specifed and as directed.

Designer type high quality fancy type looking mirror of size as approved by Engr-in-Charge 8-10mm thick, fixed to wall with stainless steel studs, screws, brackets and washers etc., fixed in repairs, complete all as specifed and as directed.

Brass CP basin mixer central hole, for mixing hot and cold water fixed as per manufacture's manual, with long shunk and cup washers, screwed both ends suitable for 15mm bore GI pipe joints to GI pipes or unions, complete all as specified and as directed. Make :- Jaquar Cat Part No. KUP- 35051BPM/ Jaquar Cat Part No. KUP- 35005BPM/ Kohler Cat Part No. K- 74013IN- 4BND-CP/ Kohler Cat Part No. K- 74026IN- 4BND-CP

Health faucet chromium plated brass with 1.00m CP long flexible pipe and brass chromium plate nuts, fixed in repairs, complete all as specified and as directed. Make :- Jaquar Cat Part No. ACN-1131N/ Jaquar Cat Part No. AKP- 35731P/ Kohler Cat Part No. K- 25069IN-CP

CP brass jet spray for EWC with 1mtr long flexible stainless steel connecting pipe 15mm bore, fixed in repairs, complete all as specified and as directed.

CP brass soap dish, fixed in repairs, complete all as specified and as directed. Make :- Jaquar Cat Part No. ACN-1131N/ Jaquar Cat Part No. AKP- 35731P/ Kohler Cat Part No. K- 25069IN-CP

Stainless steel Grating dome 125mm dia with or without hole for waste pipe, fixed in repairs, complete all as specified and as directed.

Brass chromium plated towel rack of size 600 mm x 350mm, fixed with brass screws, fixed in repairs, complete all as specified and as directed. Make : Jaquar Cat Part No. ACN-1181FHS/ Jaquar Cat Part No. AHS- 1581H/ Kohler Cat Part No. K- 25066IN-CP.

Towel ring fixed in positon with and including chromium plated brass screws and wooden/plastic cleats, fixed in repairs, complete all as specified and as directed. Make : Jaquar Cat Part No. ACN-1121N/ Jaquar Cat Part No. ACN- 1121BN/ Kohler Cat Part No. K- 5631IN-CP

Two way Angle valve 15mm bore dia or pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, fixed in repairs, complete all as specified and as directed. Make : Jaquar Cat Part No. CON-059KN/ Jaquar Cat Part No. ARI- 39053/ Kohler Cat Part No. K- 37340IN-9-CP

32mm spring type PVC waste pipe fixed toWHB and urinals, (Note minimum length of each pipe should not be less than 0.80RM), fixed in repairs, complete all as specified and as directed.

Waste fitting 32mm size of Stainless steel for WHB with long screwed shank with nut, fixed in repairs, complete all as specified and as directed.

Vitreous china floor mounted WC (Cascade) one piece type (off white) including connecetion in drain etc incl water closet seat cover CP jet spary, flushing cistern, with P or S trap with all fitting and fixture, fixed in repairs, complete all as specified and as directed. Make : Jaquar Cat Part No. LYS-WHT-38851S300UFSMN/ Jaquar Cat Part No. LYS-WHT-38851S220UFSMN/ Kohler Cat Part No. K- 17629IN-SM-0

Vitreous china squalting pan of Orrisa pattern long pan size 580mm x 440mm white with 'P' or 'S' trap front or back inlet and foot rest any pattern including connection to trap and to flushing pipe etc complete including lime concrete bedding and making good to floor, complete all as specified and as directed.

10 Ltrs capacity PVC valveless symphonic action type flushing cistern white low level with inlet, ball valve float handle including bracket etc., complete all as specified and as directed.

PVC 110mm bore (SWR) pipes single socketed, in any length with rubber ring joints, flaid in trenches or in floors, fixed in repairs, complete all as specified and as directed.

PVC (SWR) bend of 110mm bore any radius, fixed in repairs, complete all as specified and as directed.

PVC (SWR) cowl of 110mm bore, fixed in repairs, complete all as specified and as directed.

Stack clamps made out of 50mm x 5mm flat iron and 16mm dia round including bolts, nuts and securing ends of stays to walls or roof for 100mm bore of pipe, fixed in repairs, complete all as specified and as directed.

Taking down old unserviceable point wiring from existing conduit / batten type (light, fan, socket or power point) complete such as switches, ceiling rose, pendent holder, regulator and socket etc and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc., complete all as specified and as directed.

Point wiring complete with 1.5 Sqmm (nominal area) FRLS, PVC insulated un-sheathed and multistranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 20 mm dia medium grade and PVC conduit fittings such as tees, bends, elbow, reducers including FRLS PVC insulated unsheathed 1.5 Sqmm copper earth wire, connecting to common earth dolly with and including Metal flush box and top cover for fixing modular switches/sockets/fan regulator etc, and making good surface, complete all as specified and as directed for the following :- one light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push.

All as per description of Srl item No. 123 here-in-before but for one socket outlet 5/6 Amps on same board.

All as per description of Srl item No. 123 here-in-before but for one socket outlet 5/6 Amps on independent board.

All as per description of Srl item No. 123 here-in-before but with 2.5 Sqmm (nominal area) FRLS, PVC insulated un-sheathed and multistranded copper conductor cable ISI marked and 2.5 Sqmm (nominal area) FRLS, PVC insulated un-sheathed and multistranded copper conductor cable ISI marked as earth wire for one socket outlet 16 Amps on independent board.

Modular switch 6 Amp, 1 way, 1 module size, complete all as specified and as directed.

Modular socket two-in-one, 6 Amp universal type, 02 module size, complete all as specified and as directed.

Modular switch 16 Amp, 1 way, 1 module size, complete all as specified and as directed.

Modular socket two-in-one, 16 Amp multipurpose type, 02 module size, complete all as specified and as directed.

Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps, complete all as specified and as directed.

PVC insulated unsheathed single core multistranded copper conductor wire of size 1.5Sqmm, 1100volts grade cable, complete all as specified and as directed.

Sub main wiring with 2 run of 4.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to separate PVC conduit with and including 4.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB, complete all as specified and as directed. Note :- a) The conduit and conduit accessories shall be measured and paid as one unit. b) The cost of earth wire is deemed to included in he quoted rates.

MCB DB confirming to IP 43 - IK 09 with double door, SPN 2 way, double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces, complete all as specified and as directed. Make : IndoAsian/Legrand/Siemens

MCB DB confirming to IP 43 - IK 09 with double door, SPN 8 way, double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces, complete all as specified and as directed. Make : IndoAsian/Legrand/Siemens

MCB C Curve type, 10 kA, 10 to 32 Amp, Single Pole with over load and short circuit protection, complete all as specified and as directed. Make : IndoAsian/Legrand/Siemens

Isolator 10 kA, 40 Amp, Single Pole and neutral with over load and short circuit protection, complete all as specified and as directed. Make : IndoAsian/Legrand/Siemens

MCB C Curve type, 10 kA, 32Amp, Single Pole and neutral with over load and short circuit protection, complete all as specified and as directed. Make : IndoAsian/Legrand/Siemens

LED mirror light fitting 10/12 watt, cool/warm white in as per site requirement and making all electric connections, fixed in repairs, complete all as specified and as directed. Make : Syska/Polycab/Wipro/Fiem

LED energy efficient integrated batten fittings, PVC extruded heat shrinkable with shatter proof opal shell of polycarbonate 22Watt, cool/warm white as per site requirement and making all electric connections, complete all as specified and as directed. Make : Syska/Polycab/Wipro/Firm

LED Strip light flexible type tubular type cool/warm white including LED AC to DC adapter and making all electric connections, complete all as specified and as directed.

LED ceiling light fitting 10/12 Watt, in round shape, surface/recess type cool/warm white as per site requirement and making all electric connections, complete all as specified and as directed. Make : Syska/Polycab/Wipro/Fiem

AC to DC adapter for LED strip light tubular type and making all electric connections, complete all as specified and as directed.

Energy efficicent LED fittings 45W LED 6K suitable for street/builing area light pressure diecast aluminium roadway luminaire with high power LEDs and HF electronic driver complete all as specified and as directed. Make : Havells (Endura pearl Neo) Or equivalent in Philips/Wipro.

Street light fitting bracket, 1.0 mtr long made out of galvanized iron pipe of 32 mm dia size light grade complete with nut, bolts, washer etc., inclusive of one primer coat, one under coat and one finishing coat of silver paint, complete all as specified and as directed.

Sheet metal enclosure with socket and plug top single pole with 10Amp, SP MCB 230 volts, 50Hz, complete all as specified and as directed. Make : Legrand/Havells/IndoAsian

Electric water heater vertical type of 25Ltrs capacity with steel tank and glass inner lining, having 5 Star BEE rating, including fasteners for hanging and making all necessary electric and water supply connections, complete all as specified and as directed.

CP connection flexible type for geysers 600mm long including CP brass adapters with washers at both ends ISI marked, complete all as specified and as directed.

Ventilating fan 200mm sweep Plastic body with self closing louvers type, including fixing in opening and making all necessary electric connections, complete all as specified and as directed.

Wall mounting fan 400mm sweep Plastic body including fixing on wall and making all necessary electric connections, complete all as specified and as directed.

NOTE:- Irrespective of whatever specified elsewhere in tender documents, all the debris/waste materials produced out of above mentioned work shall be removed out of Cantonement land and disposed off at locations notified by the Delhi Cantonment Board for disposal of waste building materials within NCR area, without any extra cost to Department under own arrangement of contractors. The rates quoted by the contractors against the items catered here-in-above in the BOQ are inclusive of said provision.

Akhil Enterprises

M/s Shubh Enterprises