Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹41.3 Laccepted-aoc | accepted-aoc |
Tender Value
₹50.7 L
EMD Value
₹1.0 L
Closing Date
20 Dec 2025, 10:30 pmClosed
Krishna Bhagya Jala Nigam Limited
Sri T V Doddamani EE Dam Division Almatti
Operation and maintenance of Electrical portion of Landscape garden i.e. Path lights, Road lights, Bollards, internal cabling etc by providing spares and providing high mast lighting at Ticket counter.
KBJNL/2025-26/OW/WORK_INDENT2463/CALL-2
KBJNL/2025-26/OW/WORK_INDENT2463/CALL-2
Open
Other Works
Two Tender Document System(Two Cover)
KBJNL Division Dam Division Almatti
8 documents required · 8 mandatory
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
To qualify for award of this contract, each tenderer in his name should have in the last five years period. i.e., 2020-21, 2021-22 2022-23, 2023-24 & 2024-25,Achieved in at least TWO financial years an average annual financial turnover (in all Class of Civil Engineering Construction Works only) of Rs. 50.70Lakhs. (Usually not less than the estimated annual payment under this contract) (Updated to the FY in which the tenders are invited. Financial turnover of previous years shall be given a weightage of 10% per year to bring them to the price level of the financial year in which the tenders are invited).(The Turnover certificate issued by registered chartered Accountants along with UDIN) (Refer Section 3 details)
To qualify for award of this contract, each tenderer in his name should have in the last five years period. i.e., 2020-21, 2021-22 2022-23, 2023-24 & 2024-25, Satisfactorily completed (at least 90% of the contract value), as prime contractor, at least one similar work Such as Supply and Installation of High mast light or flood light/street light Electrification/AME of Electrical works of value not less than Rs.25.35 Lakhs. (Usually not less than 50% Estimated Value of Contract) Updated to the FY in which the tender are invited. The value of the completed works shall be given weightage of 10% per year to bring them to the price level of FY in which the tenders are invited and The necessary work done certificate issued by an officer not below the rank of Executive Engineer / Equivalent officer of the concerned division.
Liquid assets and /or availability of credit facilities of not less than Rs.15.22 Lakhs from any Nationalized / scheduled bank. (Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc. usually 30% of the amount of contract) As per Annexxure-E
Copy of Valid Employees Provident Fund Certificate
To qualify for award of this contract, each tenderer in his name should have in the last five years period. i.e., 2020-21, 2021-22 2022-23, 2023-24 & 2024-25, executed in any one year, (for a continuous period of 12 months ) the minimum quantities of work : (usually 80% of the annual requirement) 1. Fabrication, Supplying, Erection, testing and commissioning of High mast light-1 Each(The necessary work done certificate issued by an officer not below the rank of Executive Engineer / Equivalent officer of the concerned division) 2. Providing Electrification is 29 months.
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available tender capacity is ( A X N X 2.5 - B ) where,A is Maximum value of civil engineering works executed in any one year during the last five years at 2025-26 price level (updated to the Financial year in which the tender is invited) taking into account the completed as well as works in progress.N is Number of years prescribed for completion of the works for which Tenders are invited. 1 Year B is Value, at 2025-26 price level (updated to the Financial year in which the tender is invited) of existing commitments and on-going works to be completed during the next 1 year (period of completion of the works for which Tenders are invited).
Copy of Valid GST Registration Certificate.
The Earnest money deposit EMD in E-cash
A copy of the valid Registration certificate of: CEIG Class-1 registered Contractor
₹1,270
₹1.0 L
20 Dec 2025
13 Dec 2025
22 Dec 2025
19 Dec 2025
Operation and maintenance of Electrical portion of Landscape garden i.e. Path lights, Road lights, Bollards, internal cabling etc by providing spares and providing high mast lighting at Ticket counter.
Supplyingand fixing of retrofit type to LED bulbW with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI more than 70percentage efficacy more than80 lumen per watt, life more ...
Supplyingand Fixing of 70to150 W lamp holder 2 Pin etc complete as directed by the Engineer in charge
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130to1984 and (Virgin) PVC insulation sheathed suitable for wor...
6A Three Way socket/Small, Big Terminal Connectors etc complete as directed by the Engineer in charge
Electrician, Engine Driver, Machine Operator, Pump Driver etc complete as directed by the Engineer in charge
Supply of round/square recess/surface mounted rolling type LED Down light with W GU 10 LED Lamp RibmFabricated from Die cast aluminium with white powder coated prewired to mains connectorand has swive...
Supply of LED Bollard light fitting of W with pressure dietocast aluminium housing body for optimal thermal dissipation Lamp compartment comprising of antitoglare clear diffuser with injection moulded...
PA System amplifier 250W RMS output with complete wiring and controls accessible from front etc complete as directed by the Engineer in charge
Supply, installation, testing and commissioning of 4 to 6 Channel 4 mic/line input mixer with 2/3 band semi parametric eq 2 bus and 2 aux2 stereo return etc complete as directed by the Engineer in ch...
Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers etc complete as directed by the Engineer in charge
Supplying Installing, testing and commissioning of electronic Hooter, it consists of electronic circuit to give dual Fire alarm sound with works 24V DC with speaker all encased in suitable MS 16 gauge...
Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS 1554 (Part 1) or IS 7098 Part 1, Armouring strip thickness and resistivity as per IS ...
Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS 1554 (Part 1) or IS 7098 Part 1, Armouring strip thickness and resistivity as per IS ...
Supply and Installation/Fixing/Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shockproof, IP65 (Weather Proof), rustproof, dustproof, waterproof, c...
Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc, complete with AC 3 Rating and as per IS 13947 (a) 25Amp...
Supply and fixing of 4 pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc, complete with AC 3 Rating and as per IS 13947 (a) 40Am...
Heat Shrinkable Straight Through Jointing Kit for XLPE Cable with Copper Lugand Al Ferrule 3x95 Sqmm etc complete as directed by the Engineer in charge
Supplying of MCCB 400 Amps etc complete as directed by the Engineer in charge
Supplying of MCCB 250 Amps etc complete as directed by the Engineer in charge
Supplying of on load change over switches 4 poles, AC 23A Duty, 415V, 50Hz, AC Supply (Open Execution) 100 A etc complete as directed by the Engineer in charge
Supplying and fixing HRC fuse units base on existing switch /panel board 32 to 63 A etc complete as directed by the Engineer in charge
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC 50 Hz 12/24V DC etc complete as directed by the Engineer in charge
Supplying and fixing of Modular MCB Devices(Tripper) With Breaking capacity of 6kA 16 to 32 A TP etc complete as directed by the Engineer in charge
Supplying and fixing of Modular MCB Devices(Tripper) With Breaking capacity of 6kA 63 A TP etc complete as directed by the Engineer in charge
supply of 11 kV JOINTSand POT HEADS of 1 x1000 Sq mm, Heat Shrinkable type transition jointing kit for XLPE Cable etc complete as directed by the Engineer in charge
11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per ISto7098 (Part 2) Armouring wires dia and Resistivity as per IS 3975, 185 Sqmm, (51 GI Wires to 3.15 mm D...
Painting of existing street light pole after scrapping the old paint and painted with suitable colour namel/Silver paint including coping/footing of the pole Upto 5Mtr street light pole etc complete ...
Supply of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS 1554 (Part 1) or IS 7098 Part 1, Armouring strip thickness and resistivity as per IS 397...
Supply of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS 1554 (Part 1) or IS 7098 Part 1, Armouring strip thickness and resistivity as per IS 397...
Supplying and fixing/ replacement of Round/Conical/Diamond shaped HDPE Doom suitable for 125/160W post top lamp fittings etc complete as directed by the Engineer in charge
Supply of LED floodlight luminaire with pressure dietocast aluminium housing body for optimal thermal dissipation Lamp compartment comprising of antitoglare clear diffuser with injection moulded polyc...
Supplying and fixing regular MCCB distribution Panelconfirming to IS 8828, on wall / wood board / flush mounting using required clamps, bolts, nuts, etc, with provision for fixing of suitable type cap...
Supplyingand fixing of retrofit type to LED bulbW with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI more than 70 percentage efficacy more than 80 lumen per watt, life mor...
Supplyingand fixing to flexible LED Strip Light W Power consumption in 5m length CCT 6500 degree K, CRI more than 70percentage efficacy more than 80 lumen per W, life more than 25000 burning hours and...
Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, inc...
Providing and laying in position Cement Concrete for levelling course for all works in foundation The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes ...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation worksand super structure works of bridges upto 3.50 m height The granite/tra...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Fabrication, Supplying, Erection, Testing and Commissioning of 12 m/12.5 m to Top 100 mm and Bottom 310 mm dia ms long Polygon high mast with Single/Multiple telescopic sections having, (minimum overl...
Supplying, and fixing of Double Arm Bracket with 1500 mm Standard 40/50 mm dia Hot dip Galvanized MSBracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts e...
Supply of LED 150w floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation Lamp compartment comprising of anti glare clear diffuser with Injection moulded po...
Fixing charges of post top/ Gate/ Garden fitting /LED on the existing CI / GI or any other pipe using required size of reducer, wiring using suitable wires complete as per direction of engineer in cha...
Supplying and drawing 3C x2.5Sqmm Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130 to1984 and (Virgin) PVC insulation sheathed sui...
Supply and laying double walled corrugated (DWC) HDPE Pipe including all necessary connecting Sockets/Couplings/ Tees/Bends /Endtocaps of same materials in exisiting trench as per IS 14930 part toII s...
Supplying of 3.5 core 25 sqmm 1.1 KV LT UG cable Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS 1554 (Part 1) or IS 7098 Part 1, Armouring strip thickness in av...
Labour charges for laying of 25 sqmm to 75 sqmm In existing trench/duct 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as requiredcomplete as per direction of en...
Earth work excavation for cable trench of 0.5 to 0.75 Mtr Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards an...
Heavy Duty Copper Terminal Long Barrel 25 Sqmm Copper Terminal, ApprxWt 26 Gm etc complete as directed by the Engineer in charge
Fabricating supplying and mounting MS boxmade out 14 SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped ...
Supplying 100Amps 4x30x6mm Aluminum Strips rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/...
Supplying and fixing 40x40x6mm angle iron frame work fabricated out of MS angle iron and MS flat … with bolts, washers etc, and painted with 2 coats of red oxide and then two coats of approved paint...
Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network with I...
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v AC 50 Hz 12/24v DCcomplete as per direction of engineer in charge
Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washerscomplete as per direction of engineer in charge
Supplying and fixing 6 to 32Amps TPN miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross 3 with Short circu...
Earthing Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit The pits should be filled up with equal proportion of sal...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Detailed Technical specifications.docx
Others - Detailed Technical Specification • 0.02 MB
Technical Specifications.docx
Others - Technical Specification • 0.04 MB
KW-3 _O_M_Electrical portion.doc
Tender Document • 1.72 MB
FD order.pdf
Others - FD ORDER • 1.15 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .