REPAIR TO FENCING AND COMPOUND WALL AT OMQ ,SMQ , TECHNICAL AND ADM AREA OF 25 ED AF STN DEOLALI

Amount

Demolition of brick work or stone/boulders Masonry built in cement mortar or cement lime mortar including all quions, arches, pillars, ect but excluding ashlar facings dressed stone work and precast concrete articles.

M&L for brick work with sub class 'B' brick, straight or curved on plan exc 6.0 mtr mean radius built in CM 1:4 etc complete all as specified and directed

M& L Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in Cement mortar 1:6

M&L for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings including necessary use and waste formwork, weathering, slightly rounded or chamfered angles and throating etc complete all as specified and directed

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc

M&L for rendering 15 mm thick in CM 1:4, finished even and smooth without using extra cement complete all as specified and as directed

Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance asper IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.

Dismantling wrought iron or mild steel work of any description etc complete all as specified and directed

Dismantling fencing wire mesh, any type etc complete all as specified and directed

Dismantling post or struts (wood, steel or RCC) any section incl. taking out embedded portion and making good disturbed ground posts embedded in concrete, brick work etc.

Earth work excavation in post holes ( or similar holes) in hard/dense soil ,each not exceeding 0.50 Cum ,getting out ,returning filling in and ramming earth or broken rubble mixed with earth around ,in layers not exceeding 25 cm ,watering and removing surplus soil.

M&L for cement concrete 1:4:8 type D-2 (using 40mm graded aggregates) as in foundation and mass concrete etc complete all as specified and directed

S&F Framed mild steel work as in posts/ struts in fencing including cutting tops to shape, drilling holes,bolting,rivetting flat etc. complete conforming to Fe-290 gde E165

S&F framed brackets of angles cut to shape ,drilled, including bending and welding angles conforming to Fe 410-0

S&F Framed mild steel work as in gates including pintel hinges, stops, hand made sliding bolts etc. complete conforming to Fe-410-0 or Fe-310-0

S&F 10 mm dia Machine made screw bolts with hexagonal or square head at one end and screwed the other each screwed end to be fitted with washers and one hexagonal nut exc 5 and not exc 10 cm long

S & F 10mm dia MS bars as in strainers for chain link fencing including necessasary welding and fixing to angle iron complete all as specified and directed.

S & F Joist channel, angle or tee sections fixed independently without connecting plates etc. as in fencing posts supplied and face.

Fixing only chain link fencing including line wires, any mesh, size and any type of standards, rails, straining bolts etc.

Supply only Chain link MS galvanised fencing , any size or type

S & F in repair galvanised 2 strand steel barbed wire 2 mm dia barbed with 2.3 mm dia barbs at 75 to 80 mm spacing and straining, fixed to fencing post tieing at crossing with and including galvanised mild steel wire complete all as directed.

Restringing and resecuring of existing barbed wire incl. making good staples added fixed in repairs etc.

S&F framed work such as grills, gratings etc with ends of bars shouldered and or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walk way railing grame work of wastertanks and similar work confiming to Fe.290, Gde E-165 etc complete all as specified and as directed

Preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer

One coat of synthetic enamel paint on old painted steel surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and as directed.

Removing excavated soil/ building material/debries to a distance exc 250 mtr but not exceeding 500 mtr and depositing where directed etc complete all as specified and directed

MAHIMA CONSTRUCTION (BID ID -3078027)

M/s. SAGAR MOHAN HENS (BID ID -3089285)

sunway associates (BID ID -3088547)

N.U. MIRZA (BID ID -3095026)

M/S R.K.S. CONSTRUCTION (BID ID -3093388)