Safety Goggles with IR protection for we [Safety Goggles with IR protection for welders and gas cutters. Spec: Lens material should be made of polycarbonate with thickness 1.8 to 2.0 mm and filter shade 5 with anti-fog and anti-scratch coating on both sides. It should protect eyes from ultraviolet rays. Goggles should have indirect ventilators for air movement. It should be provided with adjustable elastic head band. The frame material should be mechanically strong and weight of goggles not more than 100 gm. It should have a universal fit soft nose bridge to ensure a comfortable fit. The lens should have marking for UV filtration, Shade No, Anti-fog and Antiscratch. The goggle lens should be tested and certified to Class-I as per EN166. And HSN Code : 90049090. Make: Udyogi/Safety equipment corporation/Prosol/ESAB/Honeywell Note: Sample to be approved by consignee before bulk supply.]

Special Eligibility Criteria

1. 1

   Supply to be as per tender specification.

   Document optionalConfirmation required

Commercial-Compliance

1. 1

   i) In case of road delivery, the date of delivery at destination (Consignees end) shall only be treated as delivery date irrespective of F.O.R./F.O.T. condition mentioned elsewhere in the contract/tender. (ii) The bidder confirms that rates and other financial terms quoted in relevant columns of financial bid will only be ruling terms for acceptance, and such terms i) In case of road delivery, the date of delivery at destination (Consignees end) shall only be treated as delivery date quoted anywhere else should be ignored. (iii) (a) Regarding MSE purchase preference firms, please refer clause 15.0 part B of Southern Railway tender conditions available under the link Public Documents->Stores/Supply. (b) Goods and service Tax: Please refer part A Para 14.0 of Southern Railway tender conditions available under the link Public Document -> Stores/Supply. (c) Preference to make in India Please refer part B Para 16.0 of Southern Railway tender conditions available under the link Public Document -> Stores/Supply. (d) Tenderers are advised to refer instructions to tenders (Part A) and Tender conditions (Part B) for other terms and conditions available under the link Public Document -> Stores/Supply. (iv) Procurement of the item is restricted to Class-I Local suppliers with minimum local content of 50% (Class-I Local supplier as defined in Railway Board letter no: No.2020/RS(G)/779/2/Pt.1 dated 25.09.2020) only and the vendors who do not qualify to be "Class-I Local suppliers" (i.e., "Non-Local suppliers" or "Class-II Local suppliers" with local content less than 50%) should not quote in the tender as their offers shall not be considered for any ordering. In case any vendor who does not qualify to be a "Class-I Local supplier" for the tendered item participates in the tender, it does so at it's own risk and cost and Railways shall not be liable for any loss or damage caused to the vendor. Please enter the percentage of local content in the material being offered. Kindly enter 0 (Zero ) for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions. (v) Tenderers shall confirm the following declaration failing which the offer is likely to be ignored. " I have read the clause regarding restrictions on procurement from a bidder of a country which shares a land border with India.I certify that this bidder is not from such a country or,if from such a country,has been registered with the Competent Authority.I hereby certify that this bidder fulfills all requirements in this regard and is eligible to be considered.Where applicable,evidence of valid registration by the Competent Authority shall be attached."

   Confirmation required
2. 2

   Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

   Document optional

General Instructions

1. 1

   (i) Offer validity should be minimum 60 days. (ii) Firms with MSME/NSIC Certificate for subject item are requested to submit the same for eligibility towards purchase preference. (iii) Tenderer should mention GST No of their firm and also HSN Code of this Item is 8607.

1. 1

   I/We have carefully gone through the IRS conditions of contract (included and uploaded along with the bid document) particularly Para 2500 pertaining to "Code of Integrity, Misdemeanor and Penalties". I/We hereby certify that no other sister concerns or affiliates (such as having common partner/director/promoter/owner/holding company decision control etc.) have participated in this tender which can give rise to a conflict of interest or fall under anti-competitive practices. We understand that the offers of all such sister concerns including ours are liable to be rejected as per relevant provisions of IRS terms and conditions. I/We, affirm that we shall abide by the Code of Integrity in general, with specific reference to conflict of interest [Para 2502 (e)], anti competitive practices [Para 2502(c)] and obligation to proactive disclosures [Para 2503]. I/We understand that we are fully responsible for the above declaration and it shall not be the Railway's responsibility to verify the same. I/We are aware that we shall be liable for all consequences of violation of Code of Integrity, if detected, at any stage.