Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
| 5 | Admitted-Finance | Admitted-Finance |
Tender Value
Refer Docs
EMD Value
₹70,000
Closing Date
15 Jan 2025, 1:00 pmClosed
Public Health Engineer
Public Health Engineer
Mechanical Annual Maintenance and material supply for Soregaon WTP, MBR pump house, Takali Head Works, Ujani Head works, Pakani WTP, Bhavani peth WTP and City water supply Pump House.
2025_SMC_1133196_1
PHE/CW/82-2024-25
Open Tender
Civil Works - Water Works
Item Rate
365 days
Solapur
Refer Tender Document
2 documents required · 2 mandatory
₹1,180
₹70,000
12 Nov 2025
4 Jan 2025
16 Jan 2025
4 Jan 2025
15 Jan 2025
4 Jan 2025
Amount
Centrifugal Pump - Dismentling, checking, Over hauling work with packing, gland packing and giving test trial
a) 10 to 50 HP
Vertical Turbine Pump- Erecting, commissioning and giving test of Vertical Turbine Pump (Water Lubricated) including bowl assembly and discharge head
a) Up to 30 HP
b )31 HP to 100 HP
c) 101 HP to 200 HP
d) 201 HP to 300 HP Each
e) above 300 HP
For column length more than 6m additional rate per column joint
a) 100 mm dia column pipe
b) 150 mm dia column pipe
c) 200 mm dia column pipe
d) 300 mm dia column pipe
e) 350 mm dia column pipe
d) 400 mm dia column pipe
e) 450 mm dia column pipe
f) 500 mm dia column pipe
g) 600 mm dia column pipe and above
Note : Add 5 % for erection of oil lubricated pumps
Vertical Turbine Pump Spaire parts making charges with material as per Sample / Standerd size
A) For 60 HP to 90 HP Vertical Turbine pump
a) Line shaft and Head Shaft out removing on machine with re-threading work.
b) Spider bush
c) Bowl Bush
d) Line shaft Sleeve S.S material
e) Stuffing box GM bush
f) Stuffing box SS sleeve
g) Impeller machining and Welding
h) Neckring cutting as per size on machine
i) Impeller shaft out checking and removing out on machine
j) Gland making
k) Strainer suction nut bolt
l) Spring washer for nut bolt
m) Spider "O" ring as per sample
n) Pump Bowl Assembly fitting work at workshop
o) New Line Shaft making as per sample size and material
p) New Head Shaft making as per size in SS Material
q) Shaft Key
r) Split Coller of shaft
s) Making Muff Coupling as per size
t) Check Nut of Bow/Head Shaft
u) New Bearing Holder as per size
B) For 100 HP to 175 HP Vertical Turbine pump
a) Line shaft and Head Shaft out removing on machine with re-threading work.
b) Spider bush
c) Bowl Bush
d) Line shaft Sleeve S.S material
e) Stuffing box GM bush
f) Stuffing box SS sleeve
g) Impeller machining and Welding
h) Neckring cutting as per size on machine
i) Impeller shaft out checking and removing out on machine
j) Gland making
k) Strainer suction nut bolt
l) Spring washer for nut bolt
m) Spider "O" ring as per sample
n) Pump Bowl Assembly fitting work at workshop
o) New Line Shaft making as per sample size and material
p) New Head Shaft making as per size in SS Material
q) Shaft Key
r) Split Coller of shaft
s) Making Muff Coupling as per size
t) Check Nut of Bow/Head Shaft
u) New Bearing Holder as per size
C) For 200 HP to 300 HP Vertical turbine pump
a) Line shaft and Head Shaft out removing on machine with re-threading work.
b) Spider bush
c) Bowl Bush
d) Line shaft Sleeve S.S material
e) Stuffing box GM bush
f) Stuffing box SS sleeve
g) Impeller machining and Welding
h) Neckring cutting as per size on machine
i) Impeller shaft out checking and removing out on machine
j) Gland making
k) Strainer suction nut bolt
l) Spring washer for nut bolt
m) Spider "O" ring as per sample
n) Pump Bowl Assembly fitting work at workshop
o) New Line Shaft making as per sample size and material
p) New Head Shaft making as per size in SS Material
q) Shaft Key
r) Split Coller of shaft
s) Making Muff Coupling as per size
t) Check Nut of Bow/Head Shaft
u) New Bearing Holder as per size
D) For 325 HP to 475 HP Vertical turbine pump
a) Line shaft and Head Shaft out removing on machine with re-threading work.
b) Spider bush
c) Bowl Bush
d) Line shaft Sleeve S.S material
e) Stuffing box GM bush
f) Stuffing box SS sleeve
g) Impeller machining and Welding
h) Neckring cutting as per size on machine
i) Impeller shaft out checking and removing out on machine
j) Gland making
k) Strainer suction nut bolt
l) Spring washer for nut bolt
m) Spider "O" ring as per sample
n) Pump Bowl Assembly fitting work at workshop
o) New Line Shaft making as per sample size and material
p) New Head Shaft making as per size in SS Material
q) Shaft Key
r) Split Coller of shaft
s) Making Muff Coupling as per size
t) Check Nut of Bow/Head Shaft
u) New Bearing Holder as per size
E) For 500 HP to 695 HP Vertical turbine pump
a) Line shaft and Head Shaft out removing on machine with re-threading work.
b) Spider bush
c) Bowl Bush
d) Line shaft Sleeve S.S material
e) Stuffing box GM bush
f) Stuffing box SS sleeve
g) Impeller machining and Welding
h) Neckring cutting as per size on machine
i) Impeller shaft out checking and removing out on machine
j) Gland
k) Strainer suction nut bolt
l) Spring washer for nut bolt
m) Spider "O" ring as per sample
n) Pump Bowl Assembly fitting work at workshop
o) New Line Shaft making as per sample size and material
p) New Head Shaft making as per size in SS Material
q) Shaft Key
r) Split Coller of shaft
s) Making Muff Coupling as per size
t) Check Nut of Bow/Head Shaft
u) New Bearing Holder as per size
Horizontal Pump work
For 30 HP to 50 HP
1) New bush making in S.S material
2) GM water guard seal
3) Stuffing box Gm material
4) check nut in SS material
5)Bearing housing turning and welding
6) Impeller shaft turning and welding
7) Gland cover
8) Neck ring in GM material
9) Pump impeller fitting on press machine
For 60 HP to 100 HP
a) new bush making in S.S material
b) GM water guard seal
c) check nut in SS material
d)Bearing housing turning and welding\
e) Impeller shaft turning and welding
f) Gland cover in GM material with stud
g) Neck ring in GM material
h) Pump impeller fitting on press machine
For 125 HP to 175 HP
a) new bush making in S.S material
b) GM water guard seal
c) check nut in SS material
d)Bearing housing turning and welding\
e) Impeller shaft turning and welding
f) Gland cover in GM material with stud
g) Neck ring in GM material
h) Pump impeller fitting on press machine
For 200 HP to 300 HP
a) new bush making in S.S material
b) GM water guard seal
c) check nut in SS material
d)Bearing housing turning and welding\
e) Impeller shaft turning and welding
f) Gland cover in GM material with stud
g) Neck ring in GM material
h) Pump impeller fitting on press machine
Supplying Gland Packing for pump
Emery Paper
1) Rough Emery paper 4'' size
2) Smooth emery paper 4'' size
Taplon Tape
Hexsaw Blade (H.S.S)
Hexsaw frame
CRC 26 spary bottle
Paratape (HT Tape)
Gasket bottle
Cotton waste
Suplying Stailess Steel Nut bolt with washer
Suplying High Tension Nut bolt with washer
MS Nut Bolt
200 mm Sluice valve/Gate Valve
1) Brass material Check nut/Box nut making as per size
2) Shaft making on machine in S.S material as per size
3) Shaft Re-threading and shaft out removing of Shaft
4) Bush making S.S material as per size
5) Valve gland making in CI material as per size
6) Valve gate (Zadap/Body) o ring machining and making in Brass material on machine as per size
7) Valve Box nut housing welding CI material and machining as per size
8) Valve Dismentling and Re- assembling
250 mm Sluice valve/Gate Valve
1) Brass material Check nut/Box nut making as per size
2) Shaft making on machine in S.S material as per size
3) Shaft Re-threading and shaft out removing of Shaft
4) Bush making S.S material as per size
5) Valve gland making in CI material as per size
6) Valve gate (Zadap/Body) o ring machining and making in Brass material on machine as per size
7) Valve Box nut housing welding CI material and machining as per size
8) Valve Dismentling and Re- assembling
300 mm Sluice valve/Gate Valve
1) Brass material Check nut/Box nut making as per size
2) Shaft making on machine in S.S material as per size
3) Shaft Re-threading and shaft out removing of Shaft
4) Bush making S.S material as per size
5) Valve gland making in CI material as per size
6) Valve gate (Zadap/Body) o ring machining and making in Brass material on machine as per size
7) Valve Box nut housing welding CI material and machining as per size
8) Valve Dismentling and Re- assembling
350 mm Sluice valve/Gate Valve
1) Brass material Check nut/Box nut making as per size
2) Shaft making on machine in S.S material as per size
3) Shaft Re-threading and shaft out removing of Shaft
4) Bush making S.S material as per size
5) Valve gland making in CI material as per size
6) Valve gate (Zadap/Body) o ring machining and making in Brass material on machine as per size
7) Valve Box nut housing welding CI material and machining as per size
8) Valve Dismentling and Re- assembling
400 mm Sluice valve/Gate Valve
1) Brass material Check nut/Box nut making as per size
2) Shaft making on machine in S.S material as per size
3) Shaft Re-threading and shaft out removing of Shaft
4) Bush making S.S material as per size
5) Valve gland making in CI material as per size
6) Valve gate (Zadap/Body) o ring machining and making in Brass material on machine as per size
7) Valve Box nut housing welding CI material and machining as per size
8) Valve Dismentling and Re- assembling
450 mm - 550 mm Sluice valve/Gate Valve
1) Brass material Check nut/Box nut making as per size
2) Shaft making on machine in S.S material as per size
3) Shaft Re-threading and shaft out removing of Shaft
4) Bush making S.S material as per size
5) Valve gland making in CI material as per size
6) Valve gate (Zadap/Body) o ring machining and making in Brass material on machine as per size
7) Valve Box nut housing welding CI material and machining as per size
8) Valve Dismentling and Re- assembling
200mm Non return valve
1) Valve gate welding in CI material where get damaged
2) Both side bushing of valve flap/gate
3) gate/flap Brass rings making in Brass/SS material as per size and fixing to it.
4) gate/flap lather sheet making material as per size and fixing to it.
5) Valve Dismentling and Re- assembling
250 mm Non return valve
1) valve gate welding in CI material where get damaged
2) Both side bushing of valve flap/gate
3) gate/flap Brass rings making in Brass/SS material as per size and fixing to it.
4) gate/flap lather sheet making material as per size and fixing to it.
5) Valve Dismentling and Re- assembling
300 mm Non return valve
1) valve gate welding in CI material where get damaged
2) Both side bushing of valve flap/gate
3) gate/flap Brass rings making in Brass/SS material as per size and fixing to it.
4) gate/flap lather sheet making material as per size and fixing to it.
5) Valve Dismentling and Re- assembling
350 mm Non return valve
1) valve gate welding in CI material where get damaged
2) Both side bushing of valve flap/gate
3) gate/flap Brass rings making in Brass/SS material as per size and fixing to it.
4) gate/flap lather sheet making material as per size and fixing to it.
5) Valve Dismentling and Re- assembling
400 mm Non return valve
1) valve gate welding in CI material where get damaged
2) Both side bushing of valve flap/gate
3) gate/flap Brass rings making in Brass/SS material as per size and fixing to it.
4) gate/flap lather sheet making material as per size and fixing to it.
5) Valve Dismentling and Re- assembling charges
Actuator Work
1) Small shaft (1-2 ft) Universal joint with, flanges as per size making on machine and including welding work
2) Large shaft (Size 2.5 to 3.5 ft) for Universal joint with flanges as per size making on machine including welding work
3) Universal joint with Flange as per size making on machine including welding work
4) After fitting actuator relay setting and panel relay setting and giving test trial ON and OFF position.
5) Providing Long Pipe 8mm thk ( 5 ft to 15 ft long) which is mounted on valve with welding work
6) Actuator Reduction (in between Actuator and Valve) Gear Box New Gear making reparing and fitting work with required material
7) Actuator Gear Box Brass New Worm Wheel Gear making and fitting required material
8) Actuator Gear Box Brass Worm Gear making and fitting required material
1) Oil seal
2)Actuator open close position setting
3)Limit switch
4) Toruqe Switch
5) Mechanical werm wheel
6) Triping arm
7) Counter gear
8) Drive assembly
9) Clutch fork assembly
10) Return spring
11) Clutch ring
12) Travel gear set
14) Gasket packing
15) Actuator panel servicing
Supplying Rubber sheet Black/White
Providing Labour/Mazdoor(Heavy)
Providing Welder
Rent for welding set
Rent for JCB
Truck hire charges upto 20 km
Truck hire charges for 50 km & above
Jeep hire Charges with driver (Upto 300 Km)& fuel
Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates, etc. as per detailed design and drawing or as directed by Engineer-incharge including cutting, fabricating, hoisting, erecting and fixing in position, making riveted / bolted / welded connections and one coat of anticorrosive paint and over it two coats of oil painting, etc. complete
Gas cutting with Comercial gas
Welding in all positions with required number of runs, for M. S. pipes internally and / or externally including gauging wherever necessary, fixing appurtenances and other accessories in connection with pipe laying work as per specification.
M.S. Flanges Providing, fabricating, erecting, M.S. Flanges sleep on type (all tables) of required size and thickness with both side machined
Painter for epoxy paint
Supplying and errecting Wire Rope with clamp
Supplying Lifting Belt with Test Certificates
Laying and Jointing PVC Pipe. Heading
Gear box repairing of clarifaculator , Gear box reparing and servicing, Over hauling, Repalce Damaged part and ,cleaning all parts of gear box and fiiting gear box giving test trial satisfactory.
1) Bewel gear for gear box
2) Pinion gear for gear box
3) warm wheel for gear box
4)Shaft
Flashmixer
a) Gear box reparing and servicing, Over hauling, Damaged part removing and install new one,Cleaning all parts of gear box and fiiting gear box giving test trial satisfactory.
b) Bewel gear for gear box
c) Pinion gear for gear box
d) warm wheel for gear box
e)Shaft
Electric Wire rope Hoist
1) Repaire of wire rop Hoist/chain electric hoist.
2)Total dismentling of 2-5 Ton hoist and repalce weard spares and give load trial.
3) Providing fixing 2-5 ton electric hoist with testing. As per govt rate inspection and testing by aithorized person and provid certificate.
4) Replacement of existing single grider HOT
5)Providing and fixing of vertical 15 MB 200mm, Horizontal 15MB 250mm with necessary square bar for long travel suitable 3 ton capacity.
6) Providing and fixing of end carriage suitable 3 ton capacity.
7)Excavation of foundation PCC work
8) Providing and fixing of horizontal 15 MB 250mm with square bar etc
9)Fixing of wall carbal and wall machinery work,concreating fixing etc
10)5 ton capacity spur gear chain pully block with 6 mtr lift with gear trolly.
11) Servicing Overhauling of 5-10 Ton Crane and testing
Spare parts for wire rope hoist (5 - 10 Ton)
1) Drum gear
2) 1st back gear with pinion
3) 2nd back gear with pinion
4)Main shaft
5) Oil seal
6) Circlip
7)Motor side coupling
8) gear side coupling
9)Wire rope guide
10) Limit switch frame
11) Intermediate axel
12) Bearing
13) Wire rop fixing clamp ( 2 Nos)
14) Lower Hook load wheel
Dismentling of old rail guide for elecrically operated (EOT) new rail guide for electrically operated (EOT) crane at pump house.
Electrical operated crane 2 to 10 Ton capacity testing and inspection by govt approved Crane Inspector. Certificate of Crane testing and use. If any material required for crane it is provided by SMC.
Clorine machine spare parts for 20 Kg capacity
1) Aqua flow make 20 kg machine Indicator tube.
2) Aqua flow make Tube Indicator base series 4000 for 20kg chlorinator machine
3)Lead washer for chlorine gas toner
4) Taplon washer
5) Copper tube pipe 3/8"
6) Copper hose nipple for copper pipe
7) Chlorine gas flow control Knob
8) Pnumatic pipe with lock
9) Vaccume guage meter (0 to 760 mm Hg)
10) Water Guage meter ( 0 to 7 Kg/cm2)
11) Dounlop Hose Pipe
12) Clamp for pipe
13) Clamp for Chlorine toner connection S.S/ HT
14) Distilled water
15) Diphragm unit
16) Vertical Filter Unit
17) Serving Overhauling of Chlorine Machine
18) Injector Unit
Vacuum Pump set (Monoblock)
Providing, erecting approved make Mono block Vacuum pumpset with base plate excluding C.C.foundation / cross channels / RSJ frame and foundation bolts etc complete
Servicing Overhauling of Vaccum Pump 3 to 5HP
Centrifugal Coupled Pump set - Erection charges
Erecting and giving test of centrifugal coupled pump set with foot mounted motor excluding base plate coupling and foundation bolts, etc. on provided concrete foundation / RSJ with accurate levelling with shims and proper alignment.
More than 300 HP
Centrifugal Monoblock Pump set
Providing, erecting and giving test of Centrifugal Monoblock pump set conforming to IS 9079 operating at 1450-1500 RPM. Pump set shall be suitable for working at various discharge and head requirements. Pump shall be erected on Provided C.C. foundation block with suitable foundation bolts grouted in C.C. foundation block.
Supplying of Foot Valve Ball type
BEARING
bearing No. 29322 E
Bearing No.6316
Bearing No 32209
Bearing No32210
Bearing No.6314
Bearing No.6306
Bearing No.6206
Bearing No.NU 319 / C3
Bearing no.6316 / C3
Bearing No.2910
Bearing No.3311
Bearing No.6311
Bearing No.6308
Bearing No.6406
Bearing No.6320
Bearing No.29324 E
Bearing No.29326E
Bearing No.7314
Bearing No.6315 C3
Brass cage 7322
Bearing No.3310
6321 Bearing
6318 Bearing
6311 Bearing
3311 Bearing
6314 Bearing
639 Bearing
638 Bearing
313 Bearing
6315 Bearing
V Belt
Glandless CIDF Sluice Valves - PN - 1.0 Providing,erecting,testing and commissioning C.I. Glandless Sluice valve suitable for working pressure of 10 kg/cm2 with standard non risingpindle, handwheel, cap etc and manufactured as per IS 2906/14846 and as per detailed specifications.
Glandless CIDF Sluice Valve PN - 1.6 Providing, erecting, testing and commissioning C.I. Glandless Sluice valves suitable for working pressure of 16 kg/cm2 with standard non rising spindle, handwheel, cap etc and manufactured as per IS 2906/14846 and as per detailed specifications.
Supplying,errection of Electric Valve Actuator for non rising spindle type sluice valve, PN 1 & PN 1.6 rating For Valve Size
Providing and supplying,errection ISI mark CI D/F reflux valves (NRV Non-Return Valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loading into truck, ransportation upto departmental stores, unloading, stacking Reflux valves as per I.S.5312 Part I (1984)
Without by pass arrangement -PN -1
With by pass arrangement - PN -1
Without by pass arrangement - PN -1.6
With by pass arrangement - PN -1.6
Supplying Pipe and Connecting Material
a)1/2" GI pipe
b)3/4" GI Pipe
c)1" GI Pipe
d)2" GI Pipe
e)3" GI Pipe
f) 1/2" Coupler GI
g) 3/4" Coupler GI
h) 1" Coupler GI
i) 2" Coupler GI
j) 3" Coupler GI
k) 1/2" Tee GI
l) 3/4" Tee GI
m) 1" Tee GI
n) 2" Tee GI
o) 3" Tee GI
p) 1/2" Elbow GI
q) 3/4" Elbow GI
r) 1" Elbow GI
s) 2" Elbow GI
t) 3" Elbow GI
1) 1/2" Union GI
2) 3/4" Union GI
3) 1" Union GI
4) 2" Union GI
5) 3" Union GI
Supplying UPVC/CPVC Pipe and Connecting Materials
a)1/2" pipe
b)3/4" Pipe
c)1" Pipe
d)2" Pipe
e)3" Pipe
f) 1/2" Coupler
g) 3/4" Coupler
h) 1" Coupler
i) 2" Coupler
j) 3" Coupler
p) 1/2" Elbow
q) 3/4" Elbow
r) 1" Elbow
s) 2" Elbow
t) 3" Elbow
1) 1/2" Union
2) 3/4" Union
3) 1" Union
4) 2" Union
5) 3" Union
GURUKRUPA ELECTRICALS AND REWINDING WORKS (BID ID -6421963)
Sagar Industries (BID ID -6416874)
GURUKRUPA REWINDING WORKS (BID ID -6421843)
Suresh Electrical (BID ID -6420957)
GIRISH MACHINERY STORES (BID ID -6420401)
stage.html
html • 0.04 MB
technical_1975322.pdf
techsummary_1975322.pdf
finance_1975322.pdf
BOQ Comparative Chart
xlsx
cancelled_1.pdf
pdf • 0.65 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.20 MB
TD_Ujani.pdf
Tender Documents • 1.38 MB
BOQ_1975322.xls
BOQ • 0.61 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .