Loading…
Loading…
Tender Value
Refer Docs
Closing Date
25 Aug 2026, 12:30 pm
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
CONSIGNEE
Not Applicable
90 days
Expenditure
General
94
6 conditions · 3 needing a document upload
1.Purchase Order shall be awarded on established sources having proven past supply performance as define below: The manufacturer firm/authorized agents of OEMS should upload supply performance i.e. copies of R Note/CRN/CRAC/Proof of acceptance of material by consignee etc for tendered item/Similar items (Similar items means Guage) to Zonal Railways/ PUs/CORE during the period of three previous completed financial year and current financial year up to date of tender Closing. Successful supply shall mean acceptance of supply by consignee. Tenderers are to note that non submission of the documents to establish their eligibility shall be taken as they are not having any such documents. Their offer shall be considered based on whatever documents are submitted.
ONUS OF SUBMISSION OF REQUISITE DOCUMENTS: In case the tenderers do not submit the requisite documents as detailed above along with their e-offer, WCR reserves the right to decide the tender on the basis of WCR vendor performance available in IMMS for the tendered item/similar items as defined above. No back- reference in this regard will be made with the bidder
AUTHORIZATION : AUTHORIZATION: (a) Preferably manufacturers should participate. ( b ) Participating traders/agents must attach tender specific authorization letter issued by the original manufacturer or their authorized stockiest/ distributor/ importer along with their offer. The tenderer must also attach documentary proof issued to the stockiest/ distributor/ importer by the original manufacturer. Else, offers will not be considered." ( C ) In case of a general authorization letter, it must clearly indicate the validity period/ expiry date. Offers with general authorization letters silent on validity period/ expiry date will not be considered for placement of order. No back- reference in this regard will be made with the bidder
Make/Brand:Make/Brand : Bidders to clearly mention the make and model of the product. Offer with make as NA/Unbranded/any good make etc. will be ignored straightway without any further correspondence.
Ambiguous offers like Unbranded products, any good make, or similar, NA etc and specifications not confirming with bid parameters, etc will be summarily rejected. Bidders to clearly provide the make and model of the offer, failing which offer may not be considered.
Firm to upload technical details/Catalogue/data sheet of quoted Make/Brand-model/ for technical evaluation, failing which offer may not be considered.
35 conditions
IN CASE BIDDER IS INDIAN FIRM OR FROM A COUNTRY THAT DOES NOT SHARE LAND BORDER WITH INDIA, SHALL CONFIRM AS UNDER:- I have read the clauses regarding restrictions on procurements from a bidder of a country which shares a land border with India as per Annexure F of WCRs e-TENDER DOCUMENT FOR SUPPLY CONTRACTS (Ver. 7.0, applicable w.e.f. 31.10.2022 with all corrigendum issued till tender closing date) with Ministry of Finance Order (Public Procurement No. 4), F. No. 7/10/2021- PPD(1) dated 23/02/2023 circulated vide OM No. F.7/10/2021-PPD dated 23.2.2023 (copy enclosed as enclosed document) ; I certify that this bidder (in whose behalf I am submitting this bid) is not from such a country which shares a land border with India (Note:- Indian firms and firms from countries not sharing border with India, may please confirm as YES).
IN CASE BIDDER FIRM IS FROM A FOREIGN COUNTRY THAT SHARES LAND BORDER WITH INDIA, SHALL SUBMIT CERTIFICATE AS UNDER:- I certify that this bidder (in whose behalf I am submitting this bid) is from such a country which shares a land border with India with regard to contents of Annexure F of WCRs e-TENDER DOCUMENT FOR SUPPLY CONTRACTS (Ver. 7.0, applicable w.e.f. 31.10.2022 with all corrigendum issued till tender closing date) with Ministry of Finance Order (Public Procurement No. 4), F. No. 7/10/2021-PPD(1) dated 23/02/2023 circulated vide OM No. F.7/10/2021-PPD dated 23.2.2023; and I further certify that this bidder has been registered with the Competent Authority. I hereby further certify that this bidder fulfils all requirements in this regard and is eligible to be considered. (Note 1; WHEREVER A BIDDER FROM SUCH A FOREIGN COUNTRY THAT SHARES BORDER WITH INDIA QUOTES, HE WILL NEED TO UPLOAD A COPY OF VALID REGISTRATION BY THE COMPETENT AUTHORITY (OR DOCUMENTARY EVIDENCE OF EXEMPTION AS PER NOTE 2 BELOW) WITHOUT WHICH THE OFFER SHALL BE SUMMARILY REJECTED.) (NOTE 2: Restrictions under this rule shall not apply to bids from such countries (even if sharing a land border in India) to which the government of India has extended lines of credit or in which the government of India is engaged in developmental projects. For updated lists of credit or in which line of credits have been extended or in which developmental projects are undertaken are given in the website of the Ministry of External affairs and in such firm will need to submit such documentary evidence.) The terms 'bidder' and 'bidder from a country which shares a land with India' shall be as defined in para II and III respectively of Annex III of Ministry of Finance Order (Public Procurement No. 4), F. No. 7/10/2021-PPD(1) dated 23/02/2023 circulated vide OM No. F.7/10/2021-PPD dated 23.2.2023.
(i) Code of Integrity, Misdemeanor and Penalties :- I/We have carefully gone through the IRS conditions of contract (included and uploaded along with the bid document) particularly Para 2500 pertaining to "Code of Integrity, Misdemeanor and Penalties". I/We hereby certify that none of our sister concern or affiliates (such as having common partner/director/promoter/owner/holding company decision control etc.) have participated in this tender which can give rise to a conflict of interest or fall under anti-competitive practices. We understand that the offers of all such sister concern or affiliates including ours are liable to be rejected as per relevant provisions of IRS terms and conditions. I/We, affirm that we shall abide by the Code of Integrity in general, with specific reference to conflict of interest [Para 2502 (e)], anti competitive practices [Para 2502(c)] and obligation to proactive disclosures [Para 2503]. I/We understand that we are fully responsible for the above declaration and it shall not be the Railway's responsibility to verify the same. I/We are aware that we shall be liable for all consequences of violation of Code of Integrity, if detected, at any stage. (Note: - May confirm as Yes , to certify all the above certification.)
(ii) Code of Integrity, Misdemeanor and Penalties :-In case your confirmation in commercial compliance regarding Code of Integrity, Misdemeanor and Penalties is 'No', then provide/upload the names and addresses of your sister concerns or affiliates .
Jurisdiction of Court :- As per Para 2703 of IRS Condition of Contract the Courts of the place from where the acceptance of tender has been issued shall alone have jurisdiction to decide any dispute arising out of or in respect of the contract.
Tenderer must indicate delivery schedule. Offers with longer delivery period with respect to the delivery period/schedule in the tender conditions may be ignored in the interest of the Railways.
PLASTIC WASTE MANAGEMENT RULE 2016:- It is certified that for execution of this contract, the plastic packing material or commodities which are made out of Compostable Plastic or Biodegradable Plastic shall be purchased from firms having certification by CPCB for manufacture or sale of plastic packing or commodities made from Compostable Plastic or Biodegradable Plastic as per rule 4 (4) of Plastic Waste Management rule 2016. It is also certified that we shall also not use any other category of plastic, such as Bio compostable or Oxo-degradable or Oxo-bio-degradable or the like, which are not recognized under Plastic Waste Management Rule 2016 with all amendments. ( Note:- May confirm as Yes, to certify all the above certification.)
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Inspection by Consignee after Receipt (TPI, if PO value more than Rs. 5.0 Lakh).
1. E-tender documents for supply contracts (ver 7.0, applicable w.e.f. 31.10.2022 with all corrigendum issued till tender closing date) is available on Indian Railway e- procurement system (IRESP) Goods and service under documents. 2. IRS Conditions of Contract [latest amendment] will be applicable.
Statutory Variation : Statutory Variation:- Statutory Variation in taxes and duties, or fresh imposition of taxes and duties by State/ Central Governments in respect of the items stipulated in the contract (and not the raw materials thereof), within the original delivery period stipulated in the contract, or last unconditionally extended delivery period shall be to Railways' account. Only such variation shall be admissible which takes place after the submission of bid. No claim on account of statutory variation in respect of existing tax/duty will be accepted unless the tenderer has clearly indicated in his offer the rate of tax/duty considered in his quoted rate. No claim on account of statutory variation shall be admissible on account of misclassification by the supplier/ contractor.
1 location across Madhya Pradesh · 10 Set total
1.SUPPLY OF SET OF THREAD PLUG GAUGE. 2.Set of Thread Ring GO / NO-GO Gauges.
94265920
94265920
Open - Indigenous
Goods
Rewa, Madhya Pradesh
₹0
Exempted
29 Jul 2026
29 Jul 2026
2 items · 10 Set total
SUPPLY OF SET OF THREAD PLUG GAUGE, ONE SET OF GO-NO-GO THREAD PLUG GAUGE SHO ULD HAVE FOLLOWING ITEM 1.) PLUG GAUGE GO & NO GO size- M20x2.5 mm pitch, Quantity-1 no, 2.) PLU G GAUGE GO & NO GO size-M16x2 mm pitch, Quantity-1 no, 3.) PLUG GAUGE GO & NO GO size- M8x1.25 m m pitch, Quantity-1 no. MAKE:- BRAKER OR MASTER METROLOGY OR SIMILAR. NOTE:- CALIBRATION CERTIFI CATE TO BE SUPPLIED FROM NABL APPROVED LABS. [ Warranty Period: 30 Months after the date of deliv ery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/CnW/REWA, WCR | Madhya Pradesh | 5.00 Set |
| Total | 5 Set | |
Set of Thread Ring GO / NO-GO Gauges. One Set of GO & NO-GO Thread Gauge should have f ollowing item (Description & Qty) : 1) Size : M16x2.0 mm-6g (One Thread Ring Gauge GO & NO-GO Gauges) - 01 Pair. 2) Size : M20x2.5 mm-6g (One Thread Ring Gauge GO & NO-GO Gauges) - 01 Pair. 3) Size : M8x1. 25 mm-6g (One Thread Ring Gauge GO & NO-GO Gauges) - 01 Pair. Make/ Brand : BAKER/ INSIZE/ PRECISIO N/ MITUTOYO/ MASTER METROLOGY or SIMILAR. Note :-CalibrationCertificate from NABL accredited Lab to b e supplied with the Gauges. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/CnW/REWA, WCR | Madhya Pradesh | 5.00 Set |
| Total | 5 Set | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].