Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.9 LAccepted-AOC B 56 LANE NO 4A SECTOR 7 VASHNAVI ENCLAVE CHANNI HIMAT JAMMU 180015 | JAMMU | JAMMU AND KASHMIR | 180015 | L1 | Accepted-AOC Being lowest bidder. | |
| 2 | L2₹14.0 L+₹1.0 L (7.71%)Rejected-Finance BOOTH NO 56 MAIN MARKET SECTOR 40 C CHANDIGARH U T 160036 | CHANDIGARH | CHANDIGARH | CHANDIGARH | 160036 | L2 | Rejected-Finance Being other than lowest bidder | |
| 3 | L3₹18.3 L+₹5.3 L (41.1%)Rejected-Finance 54 AKASHDEEP COLONY CHAKRATA ROAD DEHRADUN | DEHRADUN | DEHRADUN | UTTARAKHAND | L3 | Rejected-Finance Being other than lowest bidder | |
| 4 | Rejected-Technical | - | Rejected-Technical Not enlisted in b(i) category |
Tender Value
₹14.6 L
EMD Value
₹29,100
Closing Date
8 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF JAMMU
GE AF JAMMU AIR FORCE STATION JAMMU
CA NO GE/AFJ-60/2023-24 PROVN OF MOTORS FOR HANGER DOORS AND TWO GATE REGULATORS WITH GRATINGS AT AF STN JAMMU UNDER GE AF JAMMU. JOB NO.23WG/CAP OTM/01/23-24
2024_MES_640492_2
CA NO GE/AFJ-60/23-24
Open Tender
Civil Works
Item Rate
270 days
Jammu
Please refer tender documents
8 documents required · 8 mandatory
₹500
GE AF Jammu
₹29,100
Yes
21 Feb 2025
18 Mar 2024
10 Apr 2024
18 Mar 2024
8 Apr 2024
25 Mar 2024
Amount
SCHEDULE 'A' PART-I (AREA DRAINAGE WORK WORK)
S & F for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing (Fe 410-W(Gde-E- 250) quality-A) etc. Drilled /welded and fixing for existing drain any hole fastner or attachment to drain etc directed by Engr-in-Charge complete all as specified.
S&F for mild steel manually operator threaded 25mm dia shaft length any length, two nos macanically assembly (i.e brarings, gears, cover) as required top portion, 20 mm dia handle with required length for operating the drain gate and the all assemble fixed with nut and bolt, smooth operate (Open/close) the drain gate including welding, bolting, rebating and other connecting items, incl painting complete all as specified and directed design guided line by Engr-in-Charge.
Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of anti-rust paint, over a coat of red oxide primer, complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for any position, location etc all as specified and directed
Excavation of trenches n.exc 1.5m wide and n.ex 1.5m in depth for foundation etc or for shafts , wells cesspits manholes , pier holes etc n.ex 10sqm on plan and n.exc 1.5m in depth and getting out in any type of soil complete all as specified and directed.
M&L PCC (1:3:6) C2 (using 40 mm thick graded stone aggregate)in foundation, filling and mass concrete complete all as specified and directed by Engr-in-Charge.
M&L for brick work with sub class "B" brick st or curved on plan exceeding 6 mtr mean radius and built in cm 1:4 etc complete all as specified and directed.
Returning, filling in including spreading, leveling watering and well ramming in layers not exc 25 cm thick in any type of soil complete all as specified and directed.
Removing of excavated material (soil) from distance exc 5.Km from excavated soil lacation as directed by Engr-in-Charge (i.e Out side AF Stn) or where low laying area complete all as specified and directed by Engr-in-Charge.
M&L for PCC 1:2:4 type B-1 (20 mm graded stone aggregate) as in coping, benching etc incl necessary form work etc comlpete all as specified and as directed.
M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surface finished even & smooth with using extra cement complete all as specified.
M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.
M&L PCC (1:3:6) C2 using 40 mm thick graded stone aggregate as in surface channels and drains comlpete all as specified and as directed.
SCHEDULE 'A' PART-II (ELECTRIFICATION WORK)
Supplying, installing, testing & commissioning heavy duty 5 HP( 3.72 KW) electric motor 3 phase 50 HZ 375 to 440 volt , RPM -1440, mounting type,copper winding body cast iron high quality, high reliablty and high efficiency low power consumption etc complete all as specified and directed. Make- Crompton/Havells
Supplying, installing, testing & commissioning electric push button station 3 way with 2.5 Sqmm 3 core felxible of required cable for operation switch reverse and forward. Make L&T/ Schiender/Siemens.
Supply and fixing 10 mm dia steel string for working on rooling wheel for moving to steel gate. The steel string shall be bearing capacity minimum 5 ton complete all as specified and directed.
Supply and fixing of limit switches roller lever type IP-67 1 C/O with sensor complete board complete all as specified and directed.
Supply and fixing round pully with bearing suitable for moving of hanger door complete all as specified and directed.
Supply, installation testing and commissioning of LT control panel for motorized gate control of appropriate size from CRCA sheet of 2 mm indoor type thickness including cleaning and finishing complete with power coated in approved shade having connection, interconnections with adequate size copper wire, copper link, connector and terminal blockes etc alongwith neccessary nut and bolts, clumps etc mounted on wall duly painted all as complete directed as Engr-in-charge.Make-Milestones/ DVEPL/METFAB/JAIMA Main Circuit Breaker - a) MCB 63 Amps three phase curve 415 volts Make- Schneider/L&T/ Siemens-01 Nos (b) LED indication lamp RYM three phase-01 set. Contactor (a). Power AC contracor 40 Amps three pole Make- Schneider/L&T/ Siemens-01 Nos (Connected with revercing DOL mode). (b) Overload relays range 6 -10 Amp-01 (c) Indicating lamp for indicate following: (i) Forward running -01 No. (ii) Reverse running -01 No. (iii) Forward / Reverse/Stop push buttons to be provided on the front door-0 No. Transformer Unit:- (i) PT 415/110V, 200 VA Burden, Make-Guru/Delta/Alba. (ii) MCB DP 16A 10 KA. Make- L&T / Schnieder / Siemens.
Supply & fixing GI tubing light grade 50 mm bore on poles, under floors, road crossing etc all as reqd at site and as directed by Eng-in-Charge.
Supply, Laying, connecting including taking out,testing XLPE cable 16 Sqmm 4 core underground PVC insulated and over all sheathed with aluminium conductor heavy duty 1100 volts grade laid in trenches, floors, ducts passing through pipe for road crossing etc complete all as directed by Engr-in-Charge.(excavation, earth work, brick protection sand cushioning and GI pipe etc shall be measured & paid for separately).
Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr deep in loose / soft soil and getting out for under ground cable / erection of poles, stays etc complete all as specified and as directed.
Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm
Removing of excavated material n, exc 50 mtr away and depositing where directed at a level n, exc 1.5 mtr above the starting point complete all as directed.
Supply and laying of DWC (Double Wall Corrugated) HDPE Pipe, ISI Marked IS 16205 Part-II, of outer dia of 63 mm and inner dia 50 mm with smooth internal and profiled external surface for non pressure under ground cable including all connected accessories like coupler, 'O' Ring etc, for protection of cable complete all as specified and as directed. Make: Rex-Polyextrusion/Gemini
M&L for PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in pole pole foundation, coping, stay pits etc including provision of necessary form work to aachieve fair finishes surfaces, complete alal as specified and directed.
Supply and Fixing MCB TPN 63 Amps Four Pole C Curve 25 KA complete all as specified and directed.
Supply and fixing three phase 6 sqmm copper PVC insulated flexible type cable complete alal as specified and directed.
M & L for earthing complete with galvanized steel earth plate electrode 60 x 60cm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 mtr deep below GL with top edge of the plate not less than 1.5 mtr below normal GL and connected to earth plate surrounded by 15 cm thick packed layers of charcoal dust and common salt and connected to earth lead galvanised iron strip 25×4mm by means of bolts, nuts, check nuts and washers of galvd iron or steel and thimbles and other end of the earth wire connected to DB and protected by galvd iron or steel pipe light grade 15 mm bore and water pipe 20mm bore GI light grade with funnel and wire mesh, including all necessary excavation and earth work PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover and all as shown in electrical plate No 3 of MES schedule Pt I of 2009. Note : RCC pit cover shall be pre-cast of RCC (1:2:4) type B-I , 80mm thick reinforced with XPM weighting not less than 4 KG/sqmm in lieu of CI cover.
Distribution board iron clad TPN DB, double door with IP-54 protection suitable for MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 4 way, complete with appropriate size copper bus bar. Make-Legrand Cat pt No 5077 30 or equivalent of make L&T / Merlin Gerin multi-9 complete with one MCCB 4 pole 415 Volts 100 Amps rating with rupturing cap 25KA of the same make as of distribution board & including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed by Engr-in-Charge. (Note: MCB's and MCCB will be measured and paid seperately under relevent items)
S&F MCCB TPN 100 Amps ,415 Volts complete microproccer type
SCHEDULE 'A' PART-III (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-III of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder.
L-7 Primewave Communications
SURAT SINGH AND SONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .