PROVISION OF PAVER BLOCK WITH KERB STONES FROM HUNZA PARADE GROUND SHED TO SUNDER ENCLAVE GATE AT JAK RRC UNDER GE (WEST) JABALPUR

Amount

Excavation over areas n exc 1.5 metre deep and getting out in soft/ loose soil complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Hard core of stone (granite/ basalt/ trap) boulders or broken stone of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for moorum/ red bajri, spread, rolled and consolidated to gradient and camber as required complete all specified and directed. Note:- (i) Compacted thickness shall be measured and paid. (ii) Rolling/ compaction shall be done by vibromax roller only.

M&L for 75 mm thick PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub base of floors, path/ paving etc complete all as specified & directed.

M&L for 80mm thick rubber mould reflective factory made coloured pre cast PCC interlocking paver blocks/ tiles confirming to IS 15658-2006, M-40 designation of section as approved by GE in hard standing, laid dry over & including 50mm thick sand cushion and filling the voids of paver blocks/tiles with dry sand complete all as specified & directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in bed block for hold fast, plinth courses, copings, benhing, bed plates etc and the like including weathering slightly rounded/ chamfered angles with & including necessary use and waste of form work for fair faces of concrete, complete all as specified and directed.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to be more than 5 mm), including making drainage opening wherever required complete all as specified & directed.

J.P ENTERPRISES

M/S Modern builders

Deepesh Electricals

C L BHATIA

M/s Ram Associates

DOLPHIN INFRA

DEEPAK CONSTRUCTION