REPAIR/REPLACEMENT OF INTERNAL WIRING, FITTINGS, FIXTURES AND EXTERNAL ELECTRIC LOW TENSION DISTRIBUTION SYSTEM AT KHANAWAL UNDER GE 861 EWS.

Amount

Taking down carefully aluminum/copper point wiring (light fan socket or power) complete with fitting such as switches, tube lights, ceiling rose, pendants, regulators, MCB DB, MCB'S, Main switch from control board and making good disturbed surfaces of walls, floor to match with existing specification complete and all as specified keeping aside regulators/ light fitting/ MCBs serviceable/ unserviceable items for reuse with in the same bldg or deposited to MES store yard

M&L Point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC insulated unsheathed copper conductor single core cable (green color) as earth lead in and including PVC casing and capping medium grade of suitable size run on wall/surface with all fittings (ISI Marked) controlled by one switch including CI/MS wooden sunk box of required size or PVC Gang Box all as directed by Engr in Charge & 3mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified.

All as per srl item No-2 here in above but for one 3 pin 5A socket outlet independent controlled by one switch.

All as per srl item No-2 here in above but for one 5A socket outlet on the same board controlled by one switch.

All as per srl item No-2 here in above but for one 3 pin 15 Amps socket outlet independent with 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 Sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green color) as earth lead.

M&L for Switch piano flush button single pole one way 5 amps 240 volts, complete all as required at site or directed by Engr-in- charge.

M&L for Switch Socket combination 2 in 1, 5 Amps flush type, 230 volts, complete all as required at site or directed by Engr-in- charge.

M&L for Switch Socket combination, 6 pin 5 and 15 amps multi purpose 2 in 01 flush type, 230 volts, complete all as required at site or directed by Engr-in- charge.

S&F bell push flush type 6 Amps 240 Volt, complete all as required at site or directed by Engr-in- charge.

S&F bell/buzzer multi music type AC 230 volts single pole, complete all as required at site or directed by Engr-in- charge.

Supply and fixing in repair modular one way switch 6 Amp 240 volte suitable for 1 module etc complete as specified and directed.

Supply and fixing in repair modular socket outlet, 6A-2/3 pin combined 2 module, 230 volts complete all as specified & directed by Engr-in-Charge.

Supply and fixing in repair modular switch1 way 16A, 1 module single pole, 230 volts complete all as specified & directed by Engr-in-Charge.

Supply and fixing in repair modular socket outlet, 6A/16A-2/3 pin combined 2 module, 230 volts complete all as specified & directed by Engr-in-Charge.

Supply and fixing in repair modular ceiling fan step regulator, 120W-2 module switsh/socket type, AC 230 volts, duly ISI marked complete all as specified & directed by Engr-in-Charge.

Supply and fixing in repair modular white cover plate with frame, 2 module duly ISI marked complete all as specified & directed by Engr-in-Charge .

Supply and fixing in repair modular white cover plate with frame, 3 module duly ISI marked complete all as specified & directed by Engr-in-Charge .

Supply and fixing in repair modular white cover plate with frame, 4 module duly ISI marked complete all as specified & directed by Engr-in-Charge .

Supply and fixing in repair modular white cover plate with frame, 6 module duly ISI marked complete all as specified & directed by Engr-in-Charge .

Supply and fixing in repair modular white cover plate with frame, 8 module duly ISI marked complete all as specified & directed by Engr-in-Charge.

Supply and fixing in repair fan regulator stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as reqd all as specified and directed.

S & F Lamp holder angular/straight insulated body with back plate for batten fittings, complete all as specified & directed by Engr-in-Charge.

S&F decorative ultra slim linear LED in replacement of 20 Watt , 4 ' long lighting fixture with extruded Al heat sink , environment friendly , energy efficient ready to use pack incl LED tube complete with inbuilt electronic driver , PCB , connector block etc including connecting up with three core twisted flexible copper conductor cable with suitable size LED tube all as specified and directed by EIC. Make : Havells Cat Part No LHDD02102674 or Equivalnet/C&S/Bajaj.

Fixing only light fitting including minor repair such as service wire and bipin holder retrieved from srl item No 01 here-in-before and complete all as directed by Engr-in-Charge.

S&F warm colour decorative ultra slim linear LED in replacement of 18 Watt , 4 ' long lighting fixture with extruded Al heat sink , environment friendly , energy efficient ready to use pack incl LED tube complete with inbuilt electronic driver , PCB , connector block etc including connecting up with three core twisted flexible copper conductor cable with suitable size LED tube all as specified and directed by EIC. Make : Havells Cat Part No LHEXBLP5PN1W018 or Equivalnet/C&S/Bajaj.

Supplying and fixing in repair recess mounted warm colour 18 W LED pressure die- cast aluminium luminaries in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation and separate replaceable electronic driver, including provision of fixing in ceiling with all items required for fixing all as specified and directed by Engr-in-Charge. Make : Havells Cat Part No LHEBMFP5IZ1W018 or Equivalnet/C&S/Bajaj.

Supplying and fixing in repair recess mounted warm colour 12 W LED pressure die- cast aluminium luminaries in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation and separate replaceable electronic driver, including provision of fixing in ceiling with all items required for fixing all as specified and directed by Engr-in-Charge. Make : Havells Cat Part No LHEBMFP5IZ1W012 or Equivalnet/C&S/Bajaj.

Supplying and fixing in repair recess mounted warm colour 03 W LED pressure die- cast aluminium luminaries in powder coated white finish in round profile with optimized heat sink for efficient heat dissipation and separate replaceable electronic driver, including provision of fixing in ceiling with all items required for fixing all as specified and directed by Engr-in-Charge. Make : Havells Cat Part No LHEBMFPFIZ1W003 or Equivalnet/C&S/Bajaj.

Supply and fixing in repair LED bulk head fitting 9 W in engineering plastic housing with clear prismatic diffuser, including LED lamp and all accessories for fixing on wall all as specified and directed by Engr-in-Charge.

Supply and fixing in repair LED lamp 10W, 240V, complete all as specified and directed by Egnr-in-Charge.

Supply & fixing in repair ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed by Engineer -in- Charge.

M&L in replacement of sub main wiring with two single core PVC insulated flexible copper conductor cable of size 4 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 4 Sqmm as earth lead in & including concealed PVC casing capping medium grade 2mm thickness ISI marked or cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification incl taking down old unsv complete all as required at site or directed by Engr-in- charge.

Supply and fix in repair MCB Distribution board , 240 volts triple pole and neutral , double door, sheet steel, enclosure powder coated with 200 Amps rated copper busbar with neutral link, 4 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection and making good distributed wall surfaces to match with existing specification including taking down existing, complete all as specified and directed by Egnr-in-Charge.

Supply and fix in repair MCB Distribution board , 240 volts single pole and neutral , double door, sheet steel, enclosure powder coated with 200 Amps rated copper busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection and making good distributed wall surfaces to match with existing specification including taking down existing, complete all as specified and directed by Egnr-in-Charge.

Supply and fixing in repair MCB, SP, AC, 240 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified & directed.

Supply & fixing in repair MCB, DP (Double Pole), AC, 240 volts, B series capacity 20 Amps to 32 Amps 10kA and making connections complete all as specified & directed.

S&F in repair including connecting Isolator triple pole neutral (TPN) 100 Amps 415 Volts with rupturing capacity 10 KA,as specified and directed by Engr-in-charge.

Supply and fixing in repair exhaust fan 230mm to 250mm sweep PVC body with louvers, 240 volts AC single phase, 50 Hz, ISI marked, including necessary work in wall/sheet, including connection cable of suitable size, nut bolt and other fixing material complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair ceiling fan 1200 mm sweep ,copper winding, double ball bearing with aluminium blade set of 3, length of down rod not less then 300 mm, single phase , 240 volts ISI marked , including connection with three core copper wire etc complete all as specified and directed by engr-in-Charge. Make Havells, Model - Mozel 1200 mm, or Usha, Model-Striker 1200mm, or Bajaj, Model-Excel star 1200mm

Supply and fixing in repair wall fan 450mm high speed, 230 volts single phase with jerk free oscillation, smooth running, three blades, pull cords including fixing arrangement Make Havells, Model:- Airbol or equivalent in Bajaj and Crompton Greaves

M & L for replacement of heating element AC 230 volt of rating 1500 watt ISI marked triangular/circular type complete all as specified.

M & L for replacement of heating element AC 230 volt of rating 2000 watt ISI marked triangular/circular type complete all as specified.

Supply and installed in repair water heater vertical type ,stationary storage type of 25 ltr capacity having S/S inner vassal, five star rating , ISI Marked close/vented type (star marked) , 240 volts with heating element and auto cut thermostat, maximum output of hot water is 60 degree calicoes, including fixing arrangement nut bolts, washer/fasteners and finishing work etc complete as per existing surface, all as specified and directed by Engr-in-Charge.

Earthing complete with galvanised steel earth plate electrode 60 cm x 60cmx6mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level. connecting to the GI wire 4 mm dia by means of bolls, nuts, check nuts and washers of galvanised iron and earth wire protected by provision of GI light grade pipe 15mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and handle of 6mm dia MS bar made to shape, GI medium grade 20mm bore pipe for watering , perforated at bottom. 1.75 metre long placed on top edge of earth plate. charcoal and common salt filling with fixing arrangement, funnel wire mesh and earth work in soft soil returning filling in and removal of surplus soil to a distance not exceeding 50 meters all as per electrical plate 3 of SSR-2009 Part-I and connecting to earth test point all as specified or indicated including testing on completion. NOTE :- (i) Item of earthing includes cost of 7.5 m long GI wire of size 4 mm dia with protection pipe of 15mm dia GI medium grade, any variation in length shall be adjusted through deviation order based on SSR rates enhanced by 25%. (ii) On testing after completion of earthing if the desired earth resistance is not obtained earthing will be re-done by the contractor at his own risk and cost.

Supply laying connecting and testing in repair 1100 volt graded heavy duty XLPE cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanized steel strip or wire and overall PVC sheathed of size 25 Sqmm normal cross section 4.0 core including suitable size lugs laid in trenches fixed to pole or passing through pipes incl all necessary clamps nuts, bolts and washers and remove existing unsv cable complete all as specified.

Supply laying connecting and testing in repair 1100 volt graded heavy duty XLPE cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanized steel strip or wire and overall PVC sheathed of size 10 Sqmm normal cross section 2.0 core including suitable size lugs laid in trenches fixed to pole or passing through pipes incl all necessary clamps nuts, bolts and washers and remove existing unsv cable complete all as specified.

Excavation in trenches not exceeding 1.5 m wide and n.exc. 1.5 m deep for foundation of poles/stay/cable etc including getting out in any type of soil complete all as specified and directed by Engr-in-Charge.

Excavation in trenches beyond 1.5 m wide and n.exc. 3 m deep for foundation of poles/stay etc including getting out in any type of soil complete all as specified and directed by Engr-in-Charge.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in depth.

Removing excavated material n.exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point.

M&L Sand cushioning to cable with dry fine sand in trenches 8 cm below the cable and 15 cm above the cable after laying complete all as specified.

M&L Bricks laid in trenches flat with width equal to length of brick for cable protection well burnt sub class 'B' laid across the cable complete all ad specified.

M&L Plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified.

M&L Plain cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in coping to poles etc complete all as specified.

S & F Pin type insulator porcelain, vitreous, white/ brown or green insulators including one galvanized MS spindle, two galvanized iron washer, GI nut of size 100 mm height and 65mm dia 1100 volts grade incl dismantling of old unsv complete all as specified .

M & L for Cross arms, bracings, supports, clamps and back plate fabricated from structural steel section including nuts, bolts, washers, welding bending cold or hot, drilling holes for bolts in any shapes size as indicated or directed and inclusive of one primer coat, and one under coat and one finished coat of aluminium paint incl dismantling of old unsv complete all as specified.

Supply & fixing in replacement of cable end heat shrink type jointing kit 1100 Volts for indoor/outdoor termination with jointing material and accessories suitable for 35 Sqmm to 50 Sqmm 3.5/4.0 core XLPE/PVC armoured aluminium conductor cable complete all as specified and directed by EIC.

Supply & fixing in replacement of cable end heat shrink type jointing kit 1100 Volts for indoor/outdoor termination with jointing material and accessories suitable for 70 Sqmm to 95 Sqmm 3.5/4 core XLPE/PVC armoured aluminium conductor cable complete all as specified and directed by EIC.

Supply & fixing in replacement of cable end heat shrink type jointing kit 1100 Volts for indoor/outdoor termination with jointing material and accessories suitable for 120 Sqmm to 185 Sqmm 3.5/4.0 core XLPE/PVC armoured aluminium conductor cable complete all as specified and directed by EIC.

Supply & fixing in replacement of cable end heat shrink type jointing kit 1100 Volts for indoor/outdoor termination with jointing material and accessories suitable for 225 Sqmm to 300 Sqmm 3.5/4.0 core XLPE/PVC armoured aluminium conductor cable complete all as specified and directed by EIC.

S&F in repair cable route indicator made out of 50x6 mm angle iron 60 mm long embedded in PCC block of suitable size with moulded letter HT cable or LT cable suitable inscribed on cast iron circular plate 8 mm thick 100 mm dia complete including PCC 1:3:6 type C-2(using 40 mm graded aggregate block of 150x150x150 mm size ) all as specified and directed by Engineer - in - Charge

Supply and fixing steel tubular swaged pole with cast iron base plate finial tapper plug, bolts nuts and screws and specified type 410-SP-31 ( 9 Mtr long) in truly vertical position 1.5 m length of pole above ground level shall be painted with two coats of synthetic enamel paint in strips of 30 cm width, black and yellow alternatively and painting with two coats of aluminum paint over a coat of red oxide primer on rest part of pole and its connected parts complete all as specified laying GI pipe light grade for cable protection and fixing to existing pole with flat iron clamp 25x3mm including nuts bolts and washers etc complete of 40mm dia including taking out old unserviceable pole complete all as directed by Engr-in-Charge

S&F in repair 1100 volt grade heavy duty XLPE cable with PVC insulated aluminium conductor served with inner sheathing of PVC tape armoured with galvanized steel strip or wire and overall PVC sheathed of size 35 Sqmm nominal cross section 3.5 core laid in trenches, fixed to pole or passing through pipes including all necessary clamps, nuts, bolts washers complete all as specified and directed. Note- Earth work and protection work shall be measured and paid for separately under respective items of BOQ.

Description all as per item No. 63 above but cross sectional area 70 Sqmm 3.5 core complete all as specified and directed.

Description all as per item No. 63 above but cross sectional area 95 Sqmm 3.5 core complete all as specified and directed.

Description all as per item No. 63 above but cross sectional area 120 Sqmm 3.5 core complete all as specified and directed.

Supply & fixing in repair MCCB 4 pole, 415 volts adjustable type, 63 Amps with breaking capacity 16 KA complete all as specified.

Supply & fixing in repair MCCB 4 pole, 415 volts adjustable type, 100 Amps with breaking capacity 25 KA complete all as specified.

Supply & fixing in repair MCCB 4 pole, 415 volts adjustable type, 160 Amps with breaking capacity 35/36 KA complete all as specified.

Supply & fixing in repair MCCB 4 pole, 415 volts adjustable type, 200 Amps with breaking capacity 35/36 KA complete all as specified.

Supply & fixing in repair MCCB 4 pole, 415 volts adjustable type, 250 Amps with breaking capacity 35/36 KA complete all as specified.

Supply & fixing in repair MCCB 4 pole, 415 volts adjustable type, 315 Amps with breaking capacity 35/36 KA complete all as specified.

Supply and fixing in repair flood light luminare 30 watt with high power COB, LED module in pressure die cast aluminium housing having ingress protection 65, IK-07, powder coated and with alluminium reflector for uniform distribution of light and with U-bracket having vertical adjustable arrangement complete incl suitable size copper conductor cable for making electric connection all as specified and directed Make : Havells Cat part No LHEPBFUEIN6W030 OR Equivalent/Crompton Greaves/Bajaj.

Supply and fixing in repair flood light luminare 50 watt with high power COB, LED module in pressure die cast aluminium housing having ingress protection 65, IK-07, powder coated and with alluminium reflector for uniform distribution of light and with U-bracket having vertical adjustable arrangement complete incl suitable size copper conductor cable for making electric connection all as specified and directed Make : Havells Cat part No LHEPBFUEIN6W050 OR Equivalent/Crompton Greaves/Bajaj.

Supply & fixing in replacement of junction box of size 250x200x150 mm made of MS Sheet 1.6mm thick, front door openable with fixing screw painting with two coats of synthetic enamel powder coated paint over a coat of red oxide including alumn bus bar 4 Nos of size 25x3mm mounted on epoxy based post insulators and drilled holes for connection including 01 Nos MCB SPN 20 Amps , 1 Nos MCBs 06 amps incl magnetic lock system all as required and fixed to poles using MS strip of size 32x6mm and nuts & bolts of required size all as required at site or directed by Engr-in-charge.

M&L Painting of steel tubular electrical poles & cross arms channels etc after scrapping the old patchy cracked painted applying one coat of aluminium paint to complete pole,clamps,channel ,cross arms and black strip of 30cm to 1.5 mtr height on the same complete all as specified. And preparation of surfaces by connector will taken the power shut down on the feeder before commencement of painting work on electric poles/cross arms.

M/S AK ENTERPRISES

FG CONSTRUCTION

M/S SHIMAR STAR GLACIER

Javeed And Co

M/S Sheikh and Co

ACESOLARR RENEWABLE ENERGY LLP

M/S LATIF AHMAD BABA CONSTRUCTION

M/S STARE BUILDERS

M/S SHAH RAOUF