Loading
Loading…
Loading…
Tender Value
₹47.4 L
EMD Value
₹94,718
Closing Date
17 Oct 2026, 6:00 pm
Garrison Engineer (East) JRC
Garrison Engineer (East) JRC
Provn of overhead shelters for various check posts and steel gate (02 Nos) in CP-5 and CP-9 at under AGE B/R-II of GE (EAST) Jalandhar Cantt
2026_MES_790731_1
GE/JULL/ET-63/2026-27
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer (East) JRC
as per tender documents
9 documents required · 9 mandatory
₹500
Garrison Engineer (East) JRC
₹94,718
Yes
17 Oct 2026
23 Sept 2026
21 Oct 2026
23 Sept 2026
17 Oct 2026
10 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation in post holes (or similar holes) in soft/loose soil, each not exceeding 0.50 cum and getting out, returning, filling in and well ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm, including watering and removing surplus soil to a distance not exceeding 50m away from the starting point and making good surfaces, complete all as specified and as directed. | 60 | Each | - | - |
| 2 | M&L for PCC (1:2:4) type B-2, (using 40mm graded crushed stone aggregate) as in foundation, mass fillings for posts/struts etc, complete all as specified and as directed. | 31.65 | Cum | - | - |
| 3 | M&L for Rolled sections as in vertical member, rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410-W(GdeE-250) quality A, complete all as specified and as directed by Engr-in-Charge. | 9,238 | Kg | - | - |
| 4 | M&L for mild steel plate plain, square/rectangular cut welding to base of hollow pipes etc, complete all as specified and as directed. | 254.34 | Kg | - | - |
| 5 | M&L for compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, inlcudings all lattice bars, complete all as specified and as directed. | 8,165 | Kg | - | - |
| 6 | S&F for 20mm dia rag bolts 450mm length with nut & washer one side of J Hook type complete all as specified and directed. | 100 | Kg | - | - |
| 7 | S&F TMT bars 10mm dia and over cut to length bent to shape required including binding with mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and as directed | 1,100 | Kg | - | - |
| 8 | Ditto all as per item No 7 above, but 6mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, complete all as specified and as directed. | 200 | Kg | - | - |
| 9 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering cladding to wall, fixed with self drilling screwsas , complete all as specified and as directed. | 600 | Sqm | - | - |
| 10 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering cladding to wall, fixed with self drilling screwsas, complete all as specified and as directed. | 60 | Sqm | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.25 MB
Tender63.pdf
Tender Documents • 1.13 MB
BOQ_886504.xls
BOQ • 1.11 MB
Corrigendum01date.pdf
PDF • 0.18 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .