KTW_PARSODA

tem no.01: Excavation in all kinds of soil including boulders upto 0.60 m. diameter (0.113 cum.) for canal, seating of embankment, filter drains/ catch water drains etc. and placing excavated stuff neatly in dump area or for formation of service road/embenkment as directed including cost of all materials. machinery, labour, dressing bed and sides to required level and profile etc. with-15 M TO 250 m. lead and 6 m. lift.

Item no.02: Excavation in hard murum including boulders upto 0.60 m. diameter (0.113 cum.) for canal, seating of embankment, filter drains/ catch water drains etc. and placing excavated stuff neatly in dump area or formation of service road as directed including cost of all machinery, labour, dressing bed and sides to required level and profile etc. 15 M TO 250 m. lead and 6 m. lift.

Item no.03: Excavation in soft rock without blasting including boulders upto 0.60 m. diameter (0.113 cum.) for canal, seating of embankment, filter drains/ catch water drains etc. and placing excavated stuff neatly in dump area or for formation of service road as directed including cost of all machinery, labour, dressing bed and sides to required level and profile etc. with 15 M TO 250 m. lead and 6 m. lift.

Item no.04 Excavation in hard rock of all toughness by blasting including boulders above 0.60 m. diameter (0.113 cum.) minimising damage to sides slope of excavation in water prism area by adopting any one or combination of line drilling /pre-spliting / smooth blasting techniques and placing the excavated rock neatly in approved dump area as directed including cost of all machinery, labour, levelling bed etc. with lead upto 16 m and lift 250 m.

Item no.05: Providing laying rubble soling below foundation in layers including filling with rubble chips, murum etc. complete as directed.

Item no.06: Providing and fixing in position TMT-FE-500 bar reinforcement steel of various diameter for R. C. C. pile, caps, footing, foundation, slabs, beams, columns, canopies, staircase, newels, chajjas, lintel, pardies, copings, fins, arches etc. as per detailed design, drawing and schedules. Including, bending, hooking the bars, binding with wires or tack welding and supporting as directed comlete as directed.

Item no.07: Providing and laying in situ cement coricrete of grade M. 150 (40 MSA) of trap/granite / gneiss /quartzite graded metal for PCC with or without surface reainforcement RCC concreting requiring heavy of special type of shuttering for works of gallery, sluice, spillway crest, spillway down stream face, energy dissipating structurs, intake structurs, training walls, piers, abutment etc. with batching plants and Transit mixer with shuttering and scaffolding curing etc completed with an initial lead 50 m.and lift-1.50 m. lam till lifte ete completed as direted

Item no.08: Providing and fixing sill beams RSJ 150 x 100 mm sizeas per detailed design and drawing including one coat of anticorrosive paint with two coats of oil paints etc. completed with all leads and lifts as directed and as per specificatio

Item no.09: Providing and fixing M. S. channels 150 x 100 mm. size fabricated from 8 mm. plate including fabrication with 12 mm. dia hooks of 50 cm. in length including one coat of anticorrosive paint with two coats of oil paints etc. Complete with all leads and lifts as directed and as per specification.

Item no.10: Providing and fixing in position M.S. Needles 2.12 x 0.50 mm size as per detailed design and drawing including two coat of anticorrosive paint with two coats of oil paints etc. complete with all leads and lifts as directed and as per specification.

Item no.11: Back filling upto ground level behind the ground level behind the canal structures etc. completed (without royalty) with suitable material of approved quality in layers not exceeding 20 cm. without disturbing the structeur etc. completed.

tem no.13: Providing and constructing 230 mm thick dry rubble stone pitching with pin headers at 2 per sqrm using stones and stone chips from approved sources including cost of brem bor drea all material, labour, hand packing/wedging stone chips, finishing etc.completed with lead upto 50 m and lifts -as directed excluding royalty of materia

tem no.14: Providing and fixing canal information board of size 1.20 x 0.75 m. prepared on 16 mm guage M. S. guage sheet with angle iron frame of size 35 x 35 x 3 mm with cross bracing of size 25 x 25 x 3 mm including painting with one coat of zinc cromíte storing primer and two coats each of green/white back ground and back side grey store enameled bonded with red retro reflective sheet Engineering grade, border/ letters/numeral/ arrows coated with non peal able crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50 x 50 x 5 mm of 3.65 m long inflate at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement in M-15 block of size 60 x 60 x 75 cm as directed.

Insurance

Royalty

Please Enable Macros to View BoQ information