SPECIAL REPAIRS TO TOILET BLOCKS OF CERTAIN QUARTERS AT DSSC WELLINGTON

Amount

Demolition of brick work or stone / boulder masonry, built in cement mortar, including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floor and in pavings not exceeding 15 cm thickness (below or above ground level) and removing rubbish out side from MD land complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for, and removing rubbish out side from MD land complete all as specified and as directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc) sheets in roof, complete all as specified and as directed.

Taking down chowkats or frames including shutters (without taking off shutters from the frames) not exceeding 1.50 Sqm each complete all as specified and as directed.

Taking down shutter of any description exc 1 sqm but n. exc 2 sqm each complete all as specified and as directed

Demolition of floor hearth or wall tiling including cement mortor bedding(but not backing) and removing rubbish out side from MD land complete all as specified and as directed.

M&L for 25mm thick PCC type B-0 1:2:4, using 12.5mm graded crushed stone aggregate as in flooring to receive tiles etc complete all as specified and as directed

M&L for Glazed ceramic coloured tiles 300 mm x 600 mm x 6-7 mm thick as in vertical surfaces such as skirting dado etc set and jointed in neat cement slurry, pointed in white or coloured cement to match over and including 10 mm thick rendering in CM 1:4 to receive tiles complete all as specified and as directed. Make :- SOMANY/KAJARIA/RAK CERAMICS

M&L for non skid ceramic tiles 8 to10mm thick (square/rectangle) area of each tile exc 0.06sqm but not exc 0.11 sqm, in floors and scantling etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick screed bed in CM 1:4 complete all as specified and as directed. Make :- SOMANY/KAJARIA/RAK CERAMICS

S&F Steel tubes, 20 mm bore, galvanised, "medium grade" with all fittings & fixtures and short lengths fixed to wall and ceiling or laid in floor including cutting chases for concealed work etc and including taking down of old steel tubing complete all as specified and as directed. Make :JINDAL/TATA/ZENITH/ PRAKASH/SURYA

S&F Steel tubes, 15 mm bore, galvanised, "medium grade" with all fittings & fixtures and short lengths fixed to wall and ceiling or laid in floor including cutting chases for concealed work etc and including taking down of old steel tubing complete all as specified and as directed. Make :JINDAL/TATA/ZENITH/ PRAKASH/SURYA

S&F for cast copper alloy chromium plated 15mm dia bib tap of Make : Prayag, Cat No : 7206 or equivalent in Parryware / Hindware/ Cera, with wall flange complete all as specified and as directed.

S&F for 15mm bore Pillar tap, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered hot/cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed.

S&F for cast copper alloy chromium plated 15mm dia angle cock of Make : Prayag, Cat No : 7210 or equivalent in Parryware/ Hindware/ Cera, with wall flange complete all as specified and as directed.

M&L for Vitreous china squatling pan water closet, orissa pattern, size 580 x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including PVS (SWR) 'S' trap, provn of lime concrete and jointing to flush pipe (fixed in repair), complete all as specified and as directed. Make : Parryware / Hindware/ Cera

S&F 10 litre capacity PVC, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32 mm dia PVC flushing pipe and 15 mm dia 450 mm long PVC connection with PTMT waste coupling (fixed in repair), complete all as specified and as directed. Make : Prayag or equivalent in Paryware/Hindware

M&L for Viterous china, wash hand basin, (white) of size 550 mm x 400 mm including PTMT waste coupling 32 mm dia with long screwed shank and fly nuts, PVC, medium grade 32 mm dia waste pipe, chain and plug, porcelain stopper , PVC connection 15 mm dia, 450 mm long with brass CP nuts and washers at both ends (fixed in repair), complete all as specified and as directed. Make : Parryware / Hindware/ Cera

S&F for 500 litre capacity in triple layer, rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) in position incl all specified in SSR Part –I Complete all as specified and as directed. Make : Sintex/Polycon/Infra

M&L Ball valves (20 mm) high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms/ 50mm-1240 gms)

S&F 20mm dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. Make Zoloto.

S&F in repairs peg set of 6 hooks of Make : Prayag Cat No BEA-30 or equivalent in Parryware/Hindware) complete all as specified

S&F in repairs Towel rail of Make : Prayag Cat No BA-01 or equivalent in Parryware/Hindware) complete all as specified and as directed.

M&L for Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ' C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rails and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to in stiles & rails with suitable PVC sheet beading and joinned together with solvent cement supplying & fixing in frames at site as per specification and drawing shown in SSR Part -II, complete all as specified and as directed. Make : Rajshri Plastiwood, Indore/ M/s Dura Plast Extrusion/ M/s Sintex Industries Ltd

M&L for Solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supply & fixing in opening as per specification & drawing shown in SSR Part-II, complete all as specified and as directed. Make : Rajshri Plastiwood, Indore/ M/s Dura Plast Extrusion/ M/s Sintex Industries Ltd

S&F for Aluminium, anodised, barrel tower bolts of extruded section, 200mm long,complete all as specified and as directed.

S&F for 250mm size aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and as directed.

S&F for stainless steel/Aluminium Butt hinges, medium weight, 100 mm long, complete all as specified and as directed.

S&F for Aluminium handles, cast type, anodised of size 150 mm long, complete all as specified and as directed.

M&L 4 mm thick figured glass pin head type and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane in repairs, complete all as specified and as directed.

M&L for 2nd class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face venneers: supplied, 35 mm thick fitted to chowkats, complete all as specified and as directed.

Prepartion of new wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and as directed. Make : Asian Paints/ BERGER/NEROLAC

Prepartion of old wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. Make : Asian Paints/ BERGER/NEROLAC

Preparation of new steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and as directed. Make : Asian Paints/ BERGER/NEROLAC

S&F PVC ( SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors/wall 110 mm dia in repairs complete all as specified and as directed. Make : Supreme/ Prince/ Finolex

S&F PVC ( SWR) pipes single socketed in any length with rubber ring joints,laid in trenches or in floors/wall 75 mm dia in repairs complete all as specified and as directed. Make : Supreme/ Prince/Finolex

S&F 100mm PVC (SWR) floor trap, plain with stainless steel grating including jointing in repairs complete all as specified and as directed. Make : Supreme/Prince/Finolex

S&F 110mm dia PVC (SWR) junction single, bends with access door type in repairs complete all as specified and as directed. Make : Supreme/Prince/Finolex

S&F 75mm dia PVC (SWR) bends in repairs complete all as specified and as directed. Make : Supreme/ Prince/Finolex

S&F 110mm dia PVC (SWR) vent cowl in repairs complete all as specified and as directed. Make : Supreme/Prince/Finolex

Taking down cement plaster, any description, on brick or stone walls and ceilings, etc. including raking out joints hacking for key, scrubbing down with water etc. complete all as specified and as directed.

M&L Rendering 15 mm thick cement plaster 1:6, on stone masonry surfaces other than fair face of brick work or on one side lathing and finishing the surface even and smooth w/o using extra cement complete all as specified and as directed.

M&L rendering 5 mm thick on fair faces of brick work or concrete surfaces in CM 1:3 on ceiling and finishing the surface even and smooth without using extra cement. (Ceiling) complete all as specified and as directed.

Peparation of new plastered or unplastered surfaces of walls and applying two coats of Oil bond distemper over a thin layer of wall care putty complete all as specified and as directed.

Complete removal of existing treament from old plastered or unplastered surfaces of walls and applying two coats of Oil bond distemper over a thin layer of wall care putty complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls including preparation and applying two coats of weather coating external emulsion (APEX ULTIMA of Ashian Paints or equivalent in Berger/Shalimar) over a coat of primer on walls complete all as specified and as directed

Complete removal of existing treament from old plastered or unplastered surfaces of walls and applying two coats of weather coating external emulsion (APEX ULTIMA of Ashian Paints or equivalent in Berger/Shalimar) over a coat of primer on walls complete all as specified and as directed

Complete removal of existing treament from old plastered or unplastered surfaces of ceilling and applying 3 coats of white wash complete all as specified and as directed .

M&L for preparing newly plastered surfaces of ceilling and applying 3 coats of white wash complete all as specified and as directed.

M&L for PCC, 1:3 :6 (Nominal Mix) type C-1 (using 20 mm graded crushed stone aggregate) as in surface channels or drains etc, complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and as directed

M&L PCC solid block 1:3:6 type C1 using 20mm graded aggregate masonry built in CM 1:4 complete all as specified and as directed.

M&L for Precast renforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in cover slabs with plain fair faces inclduding setting in CM 1:4 all as specified and as directed. Note : Re-inforced shall be measured and paid separately

M&L Mild steel bars TMT 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Dismantling MS steel work of any descrption not other wise provided for complete all as specified and as directed

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.

S&F Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment (Fe-410W, Gde E-165, Qlty-A), cleats etc complete all as specified and as directed

M&L Providing, cement concrete type C1 (1:3:6) in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided complete all as specified and as directed.

M&L plain cement concrete type D-2, 1:4:8 (40mm graded aggregate) 75 mm thick as sub base of tiles complete all as specified and as directed

M&L Chequerd cement concrete coloured tiles 300 x 300 x 23-25 mm thick set and jointed in neat cement slurry in floors with grey cement & pigment including 15 mm thick screed bed in CM 1:6 all as specified and as directed

Excavation in post holes (or similar holes) each n exc 0.5cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers n exc 25cm, in watering and removing surplus soil to a distance n exe 50m and making good surface in soft /loose soil complete all as specified and as directed.

M&L Cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, crimp curved where necessary fixed with self tapping screws complete all as specified and as directed. Make : JSW Steel Ltd/ Tata Blue Scope/ Liyod Insulations (India) Ltd/Jindal

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. Make : JSW Steel Ltd/ Tata Blue Scope/ Liyod Insulations (India) Ltd/Jindal

Complete taking down of existing water proofing treatment of any description or any thickness (Brick tile, concrete, roof kerb, rounded or chamfered on edges,etc.,) and removal rubbish off the premises and through away debris upto 5 km distance, complete all as specified and as directed

M&L for APP modified water proofing membrane mineral finish, 4mm thick and weighing not less than 3.6kg/sqm reinforced with non woven ployster matt black finished weighing not less than 100 gm/Sqm having softening point not less than 140 degree celsius longitudinal tensile strength not less than 300N/Sqcm side lap & end lap 15cm over coat of bitumen primer " 0.20 Kg/Sqm complete all as specified and as directed. Make : IWL India Ltd/ STP Ltd/ Sika India Pvt Ltd/ M/s Tiki Tar Danosa (India ) Pvt Ltd/ M/s Fosroc Chemicals

M&L for durastone tile of 300x300x 8-10mm thick, laid over and including screed bed in CM 1:4, 15mm thick, set and jointed in neat cement slurry and pointed with white or coloured cement to match with tie complete all as specified and as directed. Make :- SOMANY/KAJARIA/RAK CERAMICS

M&L for cleaning the surface to remove all dust, dirt etc including Priming the surface with one coat of Smartcare Bituminous primer of make -Asian Paints/ equivalent to enhance the bonding properties. Providing and laying of protective Geotextile fabric 45GSM over the bituminous primer application with proper overlaps. Supplying and applying single component, elastomeric,pitch modified PU coating Smartcare Flexiseal PU or approved equivalent with minimum elongation of 600% and tensile strength of 2 N/mm2 as per ASTM D412 and Shore A Hardness of 90 as per ASTM D 2240. The PU Coating shall have crack bridging ability of 2mm. The system consists of applying the water proofing treatment @ 1.2 Kg/ Sqm and shall havecrack bridging ability of 2mm etc complete as per manufacturer's instructions. Over the two coats of Flexi seal PU Waterproofing application, applying and sprinkling silica sand material to the roof area, etc complete as per manufacturer's technical specification and as directed by Engr-in Charge.

M&L for cement concrete 1:2:4 type B0 (12.50mm graded stone aggregate) as in roof kerb, rounded or chamfered on edges, or as in roof padding complete all as specified and as directed

M&L for rendering 15 mm thick on roof on concrete surfaces in CM 1:4 using water proofing compound finished even and fair complete all as specified and as directed

Supply only integral water proofing compound complete all as specified and as directed

Disconnecting existing tanks of 500 ltrs capacity water tanks, setting aside for repairs, cleaning, etc. and hoisting and re-fixing in position including S&F check nut bolt etc if required complete all as specified and as directed.

Taking down and refixing in same opening after resecuring or easing and adjusting shutters of any description n exc 1 sq m complete all as specified and as directed

Taking down old, unsv aluminium/copper point wiring (light, fan, socket or power) complete, incl fixture & fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and as directed by Engr-in-Charge.

Taking down old sub-main wiring incl fixture & fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and as directed by Engr-in-Charge.

Disconnecting/dismantling of old existing un serviceable DB's any type/way 240/415 Volts with their old/un serviceable burnt MCCB/MCB's etc. complete all as specified and as directed by Engr-in-Charge.

NOTE for Item Nos 75 to 77 : Cost of making good the disturbed surfaces is deemed to be included in the unit quote rates.

M & L for concealed point wiring with two single core 1.5 sqmm PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with multi stranded copper conductor drawn through and including non-metallic PVC rigid conduit (medium grade) with all fittings and accessories ISI marked incl provision of 1.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLS, ISI marked as earth continuity conductor (green in colour) & incl fixing of modular metal flush boxes of appropriate size & thickness fixed flush to wall for mounting switch, sockets etc. with including cutting chases for conduits & sinkings for modular boxes & making good the disturbed surfaces, matching to the existing one etc. complete all as specified & as directed for One Light/fan/Call Bell etc. point controlled by one switch 5/6 Amps. : Make of cable : Havells/Polycab/Finolex.Make of conduit : -Precision/Modi/Finolex

Description all as per Item No.78 above, but for One switch socket outlet point 5/6 Amps on independent board.

Description all as per Item No 78 above, but with FRLS PVC insulated copper conductor cable of size 2.5 Sqmm and 2.5 Sqmm for earth continuity conductor green in colour for 16A switch socket complete.

M&L for Sub main wiring with two single core,FRLS, multi stranded, PVC insulated, 1100 Volt grade, cable with copper conductor of size 2.5 Sq mm in and drawing through PVC Casing capping medium grade including continuous PVC insulated copper conductor single core earth continuity conductor of size 2.5 Sqmm connected common earth all as directed.Make:Havells/Finolex/Polycab. Note : (i) 3 Runs of 2.5 sqmm cable and one run of casing caping shall be measured as one unit length. (ii) The cost of making good the disturbed surfaces & matching to the original/existing surface is deemed to be included in the quoted rate. (iii) The wiring shall be done in proper color coding using red,yellow,blue for phases, black for neutral and green for earth

S & F in replacement PVC insulated flexible multicore round copper conductor cable of size 3 core 1.5 Sqmm drawing through pvc conduit medium grade of 20mm dia including necessary end connector and clamping of conduit on wall/surface including taking down unserviceable cable complete all as specified and as directed. Make : Havells, Cat No: WHMFDSKB31X5 or techno-commercially equivalant in Finolex/Polycab/Gloster.

S & F Modular switch, one way, 6 Amp, 1 Module, 240 volt complete all as specified and as directed. Cat No : ACVSXXW061, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

S & F Modular Bell Push switch, one way, 6 Amp, 1 Module, 240 volt complete all as specified and as directed. Cat No : ACVSBXW061, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

S & F Modular switch, one way, 16 Amp, 1 Module, 240 volt complete all as specified and as directed. Cat No : ACVSXXW161, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

S & F Modular shuttered socket outlet 3 Pin, 6 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Cat No : ACVKSWW063, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

S & F Modular shuttered socket outlet 3 Pin, 6/16 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Cat No : ACVKCWW163, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of 1/2 modules all as directed. Cat No : ACTXMIIX01/02, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of 3 modules all as directed. Cat No : ACTXMIIX03, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

Supply & Fixing modular cover plate suitable for fixing switches/sockets of 1/2 modules all as directed. Cat No : ACVPPCWV01/02, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

Supply & Fixing modular cover plate suitable for fixing switches/sockets of 3 modules all as directed. Cat No : ACVPPCWV03, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor

NOTE for Item Nos 83 to 91 : The make/model of modular metal flush boxes & modular cover plates shall be same as that of modular switches & sockets.

S&F ceiling rose surface PVC/ Polycarbonate, Isolated body with face Bakelite three terminal complete all as specified and as directed. Make: Havells/CG/Anchor

S&F in repairs call Bell, AC, Bul bul chime type 230 Volt.Make: Anchor, Code-8432 or techno-commercially equiv in Legrand/Havells

S&F Surface and wall mounted LED batten 10 watts 2 feet long, extruded aluminium housing provided for efficient heat dissipation & integrated electronic driver including connecting up with and including twin/three core twisted flexible cable of suitable size in flexible conduit all as specified and as directed incl taking down old/unsv fittings. Make : Luker, Cat No:LT510P or techno-commercially equiv In Jaguar/Philips

S&F Surface and wall mounted LED batten 24 watts 4 feet long, extruded aluminium housing provided for efficient heat dissipation & integrated electronic driver including connecting up with and including twin/three core twisted flexible cable of suitable size in flexible conduit all as specified and as directed incl taking down old/unsv fittings. Make :Luker, Cat No:LT5M24 or techno-commercially equiv In Jaguar/Philips

S&F IP >= 66, IK>=07, Class I Environment friendly, energy saving, surface mounted, decorative bulk head edge lit LED luminaire 10W with min 800 lumens made of pressure die cast aluminium housing with suitable fixing arrangement complete with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed incl taking down old/unsv fittings. Make : Havells, Cat No HEXAFT10WLED857SSYMBOPC or techno-commercially equivalent in Philips/Jaguar

S & F SPN DB, 8 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary connection all as specified and as directed by Engr-in-Charge.Make: L&T, Cat No: DBSPN008DD or techno-commercially equiv in Legrand/Siemens

S & F 2 Way Enclosure, IP43, IK09, Metal single door type fitted without busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary connection all as specified and as directed by Engr-in-Charge.Make: L&T or techno-commercially equiv in Legrand/Siemens

S&F MCB, SPN, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA all as specified and dircted by Engr-in-Charge. Make-L&T, Cat No-BB20320C or techno-commercially equivalent in LEGRAND/SIEMENS.

S&F MCB, SP, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA. Make-L&T, Cat No-BB10320C or techno-commercially equivalent in LEGRAND/SIEMENS.

S.RAMACHANDRAN

Sri ASK Constructions