Widening and strengthening work on the road from Delhi-Yamnautri (National Highway No. 709B) via Ghateda, Mundikhedi, Umri Kalan to Ambehata Chand (other district road).

Amount

Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m complete in all respects but excluding GST

Dimantling brick work or stone work in lime or cement mortar and including stacking of materials as directed be the Engineer-in-charge within a distance of 60 meter (200 feet). complete excluding GST. SI. No. 692

Mechanically compected to achieve 95% proctors density including arrangement of water, settlement and all T&P including roller and its fuel etccomplete in all respects but excluding GST.(SI No 260)

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. complete in all respects but excluding GST

Construction of granular sub-base by providing grading -1 material in uniform layers with motor grader on prepared surface by mix in place method with rotavator at OMC, & compecting with vibratory roller to achieve the desired density, complete as per Clause 401 complete in all respects but excluding GST

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. (W.M.M.) complete in all respects but excluding GST

Providing & applying Primer coat with bitumen emulsion (SS-1 Type) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.60kg/Sqm. Using mechanical means. complete excluding GST.

Providing & laying Dense graded Bituminious macadam with100-120TPH batch HMP producing an average output of 75 tonne per hour using crushed aggregates of specified grading, premix with bituminous binder (Bitumen VG-40) @ 4.5 Per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, lever and alignment, rolling with smooth wheeled vibratory and tandom roller to achieve the desired compaction as per MORTH Specification clause 507 Complete in all respects inculding all material (Grade-II) complete in all respects but excluding GST

Providing & applying Tack coat with V.G.-10 on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.20kg/Sqm. On the prepared Bitumen/ granular surface clieaned with mechanical broom. complete in all respects but excluding GST

Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder (Bitumen VG-40) @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects but excluding GST

Construction of un-reinforced, without dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing. complete in all respects but excluding GST

Cement Concrete with 4 cm gauge approved stone grit, coarse sand & cement in the proportion of 6:3:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. S.I. NO. 279(b) complete in all respects but excluding GST

Providing and laying reinforced cement concrete in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5 (R.C.C M 25) complete in all respects but excluding GST

Providing and laying reinforced cement concrete in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5 (R.C.C M 20) complete in all respects but excluding GST

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications. complete in all respects but excluding GST

(B) M-150 Brick Work in 1:3 (One cement & Three Corse sand) mortar in foundation and plinth including supply of all materials labour, Tools & plants etc. required for proper complete in all respects but excluding GST. (SI. No. 307) complete in all respects but excluding GST

Struck pointing with cement mortar consisting of 1 part cement and 2 parts of fine sand of 1.25 Fineness modulus. required for proper complete in all respects but excluding GST. (SI. No. 574 )

12 mm thick plaster with cement and fine sand of 1.25 fineness modules mortar in 1:3. including supply of all materials, labour, tools & plants etc. required for proper complete in all respects but excluding GST. (SI. No. 282 )

Cement Concrete with 2 cm gauge approved stone grit, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. required for proper complete in all respects but excluding GST. (SI. No. 279 a )

Providing and laying reinforcement cement concrete pipe NP-3 class bedding in single row 450mm dia Hume Pipe culvert including head wall etc. as per MORTH Specification complete in all respects but excluding GST

Providing and laying reinforcement cement concrete pipe NP-3 class bedding in single row 600mm dia Hume Pipe culvert including head wall etc. as per MORTH Specification complete in all respects but excluding GST

Providing and laying reinforcement cement concrete pipe NP-3 class bedding in single row 900mm dia Hume Pipe culvert including head wall etc. as per MORTH Specification complete in all respects but excluding GST

Providing and laying reinforcement cement concrete pipe NP-3 class bedding in single row 1000mm dia Hume Pipe culvert including head wall etc. as per MORTH Specification complete in all respects but excluding GST

Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification.

Providing and laying Filter material Graded stone aggregate of required size underneath pitching in slopes complete as per drawing and Technical specification

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications

(a) Sand filling in plinth and under floor including supply of necessary quantity of sand from a distance not exceeding 8 Kms. from the site of work and including watering, dressing etc. labour and T&P etc. required for proper complition of the work. saplings of girth upto 30 cms. measured at a height of 1 M. above ground level and removal of rubbish upto a distance of 50 M. out side the periphery of area cleared. including cost of sand. S.I. No.255

M-150 Brick on edge pavement on parties with bricks, laid dry joints filled with local sand including preparation of base to proper slope, and its ramming, spreading layer of 1 cm. (3/8") depth of local sand over the subgrade and including supply of all materials, labour Tools &plants etc. required for proper completion of the work. S.I. No. 763

Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8, fixing in position including painting and printing etc. Ordinary kilometer stone (precast) as per MoRTH specification clause No. 804 complete excluding GST.

Reinforced cement concrete M15 grade Hectometre stone of standard design as per IRC:8, fixing in position including painting and printing etc.Hectometer stone (precast) as per MoRTH specification clause No. 804 complete excluding GST.

RCC DEVELOPERS PRIVATE LIMITED (BID ID -5134728)