Replacement of Existing boreWell Hand Pump and Proving Mini Power Pump with HDPE Tank at Kanniamman Kovil Street in Ward No.54 in Zone-4

Amount

Supply and delivery of 1.5 HP Submersible pump set as per IS 8034/2002 With out panel Board 20x lpm x 125m including cost and conveyance of materials to work site etc complete.

Supply and delivery of 2HP single phase panel board with two level guard and auto start including cost and conveyance of materials to work site etc complete.

Supply and delivery of following PVC,HDPE,Gi pipes and specials etc completed

32mm dia HDPE pipes for sub-mersible pump in bore well class -5

8" dia bore cover

32mm dia Bore clamp

32mm dia GI Elbow

32mm dia Hex Nipple

32mm dia Hose collar

32mm dia GM NRV

32mm dia PVC Elbow

32mm dia PVC Pipe

32mm Dia GI pipe

Nylon Rope

32mm dia GI Flange Set

Supply and delivery of jointing of XLPE insulated and sheathed 2.5 sq.mm 3 core flat type copper cable conforming to IS 694/1990 etc complete as per standard Specification

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V on 7 / 20 GI bearer wire for service connection mains SD-65

Wiring with 2x1.5 Sq.mm(22/0.3)PVC insulated unsheathed Sc Cu .conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box with 5A F.t switch inflush with wall covered with hylem sheet of 3mm thick with painting of suitable colour for open PVC light point/fan point SD 18

Labour Charges for the erection of submersible pumpset in borewell including fixing and jointing submersible cable with proper clamps upto the starter to the required depth and also fixing of riser pipes to required depth values execution clamps etc. as per I.E. rules etc. complete and testing the pump set and trail run for 10 days

Providing Kisok of size 75x45x75cm made up of GI Sheet of 18 gauge with locking arrangements and fixing over the pedestal of 0.75 x 0.45 x 1.20m using country bricks, plastering, painting & finishing etc., The rate including the cost of painting with kiosk box etc. complete.

Supply Delivery of HDPE Tank as per IS 12701/1996 of size 1000 litres capacity bearing with ISI mark providing 3 Nos. of 20mm Tap Connection with check nut, washer nipple arrangement and 1 No. of 25mm of scour and 32mm for over flow arrangement etc. complete.

Construction of brick work pedestal for HDPE tank using country bricks in cm 1:5 mix,size 1.30m dia 0.60m height with a platform of 2.50m outer dia to a depth of 0.30m height with PCC 1:4:8 using 40mm HBG metal and fixing HDPE tank over the pedestal including painting & writing scheme details etc. complete

Construction of brick work pedestal for Kiosk box using country bricks in cm 1:5 mix,size of 0.75mx0.45x1.40m height ,including necessary earth work filling sand, PCC 1:4:8 using 40mm HBG metal,plastering with cement mortar 1;5 mix to 12mm thick and painting two coats over one coat of white washing fixing Kiosk boxover the pedestal etc completed as per standard specification

Supply and fixing of TNEB meter Board suitable for 32A Single phase service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank size of 375mm x300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable boult and nuts for fixing the tw plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit(SD 125

M/S.RIYA ENTERPRISES (BID ID -1132403)