PROVISION OF DEFICIENT STREET LIGHTS AND GARDEN LIGHTS IN MARRIED ACCOMMODATION AREA AT INS CHILKA

Amount

Excavation in trenches not exceeding 1.5 mtrs wide and not exceeding 1.5 mtr deep in any type of soil for laying underground cables, laying pipes etc. complete all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layres not exceeding 25 cm thick in any type of soil complete all as specified and directed.

Removing surplus soil to a distance not exceeding 50 m and depositing at a level not exceeding 1.5m above the starting point all as specified and directed.

S&F 63mm High density poly-ethylene pipes (HDPE) of pressure 6 kgf/cm2 pipe, for road crossing of cable or for cable protection laid in trenches or above ground surface etc all as specified and directed of Make- Prince/Dutron/National/ Supreme/ Finolex

Supply, erecting and fixing steel tubular swaged poles/ Hexagonal type/ Octagonal type of type 410-SP-31 (9.0 mtr long) in a proper position complete with CI base plate, finial taper plug, bolts, nuts ,screws and pole cap and inclusive of two coat of aluminium paint over a coat of red oxide primer including preparing the surface all as specified and as directed. Note:- Earth work shall be measured and paid seperately under the respective item.

S&F energy saving LED street light fittings, 60 Watts or nearest higher wattage, with in-built electronic driver, IP 66 class of protection with versatile pressure die-cast aluminium housing parts, pure polyester powder coated dark gray housing, toughened glass cover with silicon gaskets and energy efficient LED 5700K and connecting up light fitting with copper conductor cable of suitable size from junction box to connector block including all accessories etc complete all as specified and as directed. Make:Crompton TRP-421-60-57-SL-LM-NBK or equivalent in Philips/Bajaj/ Wipro

S & F 10W LED bollard light with robust design and efficient light distribution, IP-65 rated connecting up bollard light with copper conductor cable of suitable size from junction box to connector block including all accessories complete all as specified and as directed. (Make: Crompton LBLSR: 10-WWor equivalent in Philips/ Bajaj/Wipro).

Supply and lay in trenches, fixed to wall / pole/ tray etc UG cable XLPE insulated armoured heavy duty electric UG cable with aluminum conductor 1100 volts grade of cross sectional area of 16Sq mm 4 core all as specified and as directed.(Make : Finolex/Plaza/Havells/NICCO)

Ditto all as per above item but of Cable size 10 Sqmm 2 Core etc all complete.

Supply and fix PVC insulated two single core 2.5 sqmm FRLS copper conductor and one run of 2.5 sqmm multistranded copper conductor as earth continuity conductor drawn through and including 25mm dia non metallic rigid PVC conduit and accessories complete all as specified and as directed. Note : (i)Two run 2.5 Sqmm of single core, one run of 2.5 sqmm earth conductor and PVC conduit will be measured as one RM.(ii) Make of PVC copper conductor : Finolex/Poly cab/ Asian and Make of PVC conduit : Avon plast/ Kon seal/ Garware/ Precision.

Supply and fix new GI bracket made out of 40mm dia GI pipe length 1.2 mtr long bent to an angle 135 degree including two coats of aluminium paint over a coat of zinc chromate primer along with clamps, bolts, nuts etc complete all as specified.

Supply and fix weather proof looping out box PVC without side dimension 140 x 140 x 95 mm comprising of connector and MCB SP 6-32 A including mounting arrangements and lugs etc. complete all as specified and as directed. Make :Sintex/Hensel

Ditto all as per above item but of box size 250 x 200 x 100 mm etc all complete.

M&L for Cutting the road / hard standing for laying of pipes / cable in trenches and making good with PCC 1 :2 :4 (0.3 x0.3 mtr) Type B1 complete and painting with black paint , if necessary, to match with existing bituminous road colour complete all as specified and as directed by the Engineer-in-Charge .

M&L for Plain Cement concrete for foundation of type C1 20 mm graded aggregate as in 1;3;6 for foundation etc all complete.

M & L for Earthing complete with galvanized earth plate electrode 600 x 600 x 6 mm buried directly in ground vertically to a depth of not less than 2.25 mtr below ground level connected to galvanised earth lead wire 4.00 mm dia means of nut, bolts and washers made out of galvanized iron mild steel and 40 mm dia GI pipe "light grade" for protection of earth lead/Strip and connected to control board or main switch or as directed by Engineer -in-Charge including earthing pit in PCC (1:3:6) type C1 for chamber & Pre-cast RCC cover of size 380 x 380 x 40 mm with one handle made out of 8 mm dia round bar, 20 mm dia GI pipe light grade for watering funnels , wire mesh and provided charcoal or coke of alternative layers of 15 cm including necessary earth work complete.

M & L for Earthing complete with galvanized earth plate electrode 600 x 600 x 6 mm buried directly in ground vertically to a depth of not less than 2.25 mtr below ground level connected to galvanised iron strip 25 x 4 mm means of nut, bolts and washers made out of galvanized iron mild steel and 40 mm dia GI pipe "light grade" for protection of earth lead/Strip and connected to control board or main switch or as directed by Engineer -in-Charge including earthing pit in PCC (1:3:6) type C1 for chamber & Pre-cast RCC cover of size 380 x 380 x 40 mm with one handle made out of 8 mm dia round bar, 20 mm dia GI pipe light grade for watering funnels , wire mesh and provided charcoal or coke of alternative layers of 15 cm including necessary earth work complete.

Supply,install, commission and testing cubical type Street light panel board,outdoor type, manufactured by a CPRI approved factory, floor mounted, dust & vermin proof, front and rear operated door with necessary locking arrangement made of 50 x 6mm MS angle iron frame work and CRCA sheet of 3.15mm thick duly painted with two coats of powder coated paint of approved shade after seven tank treatment process both internally and externally. The panel shall be suitable for 415 Volts, 50 HZ, 3 Phase 4 wire system and shall be complete with suitable capacity aluminium bus bar (1.5 times the incoming switch gear current rating) with suitable size of PVC insulated copper conductor, thimbles glands etc complete all as specified and directed with the following accessories : (a) MCCB 63 A 4 Pole 415 V 25 KA - 01 No (Incoming) (b) MCB TPN 40A, 04 Pole 10 KA L&T - 04 Nos (c) Street light timer Digital Switch - 1 No (d) Power contracts 32 MNX 3 pole - 1 No (e) Aluminium bus bar 4 strip (f) Internal wiring for panel incl insulators, sleeves etc (g) Painting and treatment as per CPRI

M &L for Cross arms, bracings, supports ,clamps and back plates fabricated from structural steel sections including nuts,bolts, washers,welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint etc all complete.

SAHADEV PALAI (BID ID -3485411)

D RAVICHANDRAN (BID ID -3485859)