REPAIR AND MAINTENANCE OF STREET LIGHTS, LT OH/UG CIRCUIT, SWITCH GEAR, PANEL, BOARDS, MCCBS AND OTHER CONNECTED ACCESSORIES AT ZONE-II AREA UNDER GE (S) JAIPUR AT MIL STN JAIPUR

Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 sqm on plan and in soft /loose soil etc complete all as specified and directed.

Returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil etc complete all as specified and directed

M&L for sand filling under floor or in foundations including gently punned as in cushioning to cable complete all as specified and directed. Note:- Punned thickness of sand shall be measured and paid.

Removal of excavated materials (soil) not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting points etc complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges or pedestal / coping of pole including necessary form work complete all as specified and directed.

M&L for brick protection cover to the under ground cable (with old size sub class 'B' bricks) with width equal to length of brick laid dry and flat abutting each other with gaps between adjacent brick not exceeding 10 mm all as specified and directed.

S&F galvanised tube of 50 mm bore, light grade with all fitting laid in trenches complete all as specified and directed.

S&F galvanised tube of 80 mm bore, light grade with all fitting laid in trenches complete all as specified and directed.

S&F in repair galvanised tube of 40 mm bore, light grade with all fitting complete all as specified and directed.

S&F in repair steel tubular swaged pole 410 SP 31 (9 meters long) complete with cast iron base plate, finial, taper plug, nuts, bolts and washers all as specified including painting of poles with one coat of red oxide primer and two coat of aluminium paint before fixing and one coat of aluminium paint after fixing complete embedded portion will be painted with two coat of black bituminous paint complete all as specified and directed. Note : Excavation, earthwork & PCC in foundation and coping shall be measured and paid seperately.

M&L in repair, for ACB (Air Circuit Breaker) 4 Pole, 415 V, Manual Drawout type with microprocessor release of capacity 800 Amps and including extension terminals and Ics = 100% Icu connecting using suitable fasteners, modification / fabrication if required, complete all as specified and directed.

M&L for danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size, for LT, 20x15cm size complete all as specified and directed.

Suppy and laying or passing through pipe in repair, 1100 volts grade heavy duty cable with PVC insulated aluminium solid conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 6 sqmm 2 core nominal cross section in service connections complete all as specified and directed.

S&F in repair LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP-65/66 protection complete all as specified and directed. Note :- (i) T&P (Tools and Plant) required for repair / maintenance such as ladder, crane vehicle, manpower etc. shall be inclusive with qouted rate. (ii) The rate of necessary arrangement for fixing LED light on existing bracket like reducer or extention of pipe of suitable size as per dia of GI pipe LED light by welding etc. are inclusive in the rate.

S&F in repair LED street light fitting 100 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP-65/66 protection complete all as specified and directed. Note :- (i) T&P (Tools and Plant) required for repair / maintenance such as ladder, crane vehicle, manpower etc. shall be inclusive with qouted rate. (ii) The rate of necessary arrangement for fixing LED light on existing bracket like reducer or extention of pipe of suitable size as per dia of GI pipe LED light by welding etc. are inclusive in the rate.

S&F in repair LED flood light 170 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed. Note : The quoted rate include the cost of assembling of the complete fitting and its testing before and after mounting or erection etc. for proper functioning.

S&F in repair LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed. Note : The quoted rate include the cost of assembling of the complete fitting and its testing before and after mounting or erection etc. for proper functioning.

M&L for disconnecting and taking down unserviceable street light / flood light fittings and accessories of any size / type / make from high mast pole / electric pole / building, safely and re-fixing after minor repair like LED driver, cleaning, tightening of loose component etc and servicing in serviceable condition including provision of cable for connection complete all as specified and directed. Note : (i) The tools and plants required for repair / maintenance such as ladder, crane vehicle, menpower etc. shall be inclusive with the quoted rate. (ii) Spare parts like LED drivers etc. are measure and paid seperately under respective items.

M&L for LED driver with surge protection as per existing make or compitable for existing 45 to 60 watt LED light complete all as specified and directed.

M&L for LED driver with surge protection as per existing make or compitable for existing 60 to 80 watt LED light complete all as specified and directed.

M&L for LED driver with surge protection as per existing make or compitable for existing 80 to 100 watt LED light complete all as specified and directed.

M&L for trimming of tree branches in vicinity of electric poles and removing exc. 50m from pole and depositing where directed by Engg-in-Charge. Note : Measurement and payment shall be made by measuring span between two adjacent poles as One Job.

M&L for cable jointing kit for 1100V grade cable for heat shrink type straight joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 10 sqmm to 35 sqmm complete all as specified and directed. Note : The quoted rate include the cost of necessary earth work if required.

M&L for cable jointing kit for 1100V grade cable for heat shrink type straight joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 50 sqmm to 70 sqmm complete all as specified and directed. Note : The quoted rate include the cost of necessary earth work if required.

M&L for cable jointing kit for 1100V grade cable for heat shrink type straight joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 95 sqmm to 150 sqmm complete all as specified and directed. Note : The quoted rate include the cost of necessary earth work if required.

M&L for cable jointing kit for 1100V grade cable for heat shrink type straight joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 185 sqmm to 300 sqmm complete all as specified and directed. Note : The quoted rate include the cost of necessary earth work if required.

S&F in repair LED indicating lamp (set of three lamps, RYB), 240 volts AC including necessary wiring complete all as specified and directed.

M&L for cutting / removing damaged hinge (set of two) of any size and welding / fabricating new hinges with best quality in the existing panel including making good of existing surface complete all as specified and directed.

Surface dressing / cleaning of vegetation at vaious locaions near by LT panels, 2 pole stucture, 4 pole structure and substation including trimming of tree branches, bushes, creepers etc. complete all as specified and directed. Note : The frequency of surface dressing shall not be less than 2 months.

M&L for finding electrical fault in underground cable using fault locating machine as per site requirement for LT cables of any type/size complete all as specified and directed.

M&L for shifting of LT panel of any size, from one location to another location (in Zone-II area) including replacement of old luxs on any type/size of cable, disconnecting and making all electric connection and including PCC foundation of 1:3:6 type C1 using 20 mm graded stone aggregate as per site requirement and testing complete all as specified and directed.

M&L for painting of LT feeder panel with two coats of synthetic enamel paint over a coat of primer and cleaning dust outside / Inside before applying paint. Note : (i) Second coat should be applied after a gap of 24 hours. (ii) The colour of paint will be decided by Engineer-in-Charge.

M&L for cable jointing kit for 1100V grade cable for heat shrink type straight joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 400 sqmm complete all as specified and directed. Note : The quoted rate include the cost of necessary earth work if required.

M&L for cable jointing kit for 1100V grade cable for heat shrink type end joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 10 sqmm to 35 sqmm complete all as specified and directed. Note : The quoted rate include the cost of necessary earth work if required.

M&L for cable jointing kit for 1100V grade cable for heat shrink type end joint joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 50 sqmm to 70 sqmm complete all as specified and directed. Note : The quoted rate include the cost of necessary earth work if required.

M&L for cable jointing kit for 1100V grade cable for heat shrink type end joint joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 95 sqmm to 150 sqmm complete all as specified and directed. Note : The quoted rate include the cost of necessary earth work if required.

M&L for cable jointing kit for 1100V grade cable for heat shrink type end joint joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 185 sqmm to 300 sqmm complete all as specified and directed. Note : The quoted rate include the cost of necessary earth work if required.

M&L for cable jointing kit for 1100V grade cable for heat shrink type end joint joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 400 sqmm complete all as specified and directed. Note : The quoted rate include the cost of necessary earth work if required.

S&F in repair Bus bar electrolytic grade copper of 32×4 mm, mounted on insulators including drilling holes, disconnection & reconnection of cables from existing panel complete all as specified and directed.

M&L for cable route indicator of 10 cm dia and 4mm thick of cast iron with 80cm long, 25x25x4 mm angle iron along the LT cable trench including painting and grouting in ground in PCC 1:2:4 type B1 using 20 mm graded aggregate complete all as specified and directed.

M&L precast earthing pit of size 430 x 430 x 300 mm (Clear Opening - 300 x 300 mm) made in PCC 1:2:4 type B-0, using 12.50 mm graded stone aggregate alongwith 70mm thick precast cover slab of RCC 1:2:4, type B-1, using 20mm graded stone aggregate with suitable MS handle complete all as specified and directed. Note : The reinforcement in cover shall be of 8mm dia TMT bars laid both ways @ 75mm c/c spacing.

M&L for radium location sign board, green colour, 900 mm x 750 mm x 3mm board size of stainless steel plate, two stainless steel pipe of 2.5 m long and 50 mm dia medium grade pipe and write 15 mm word size with reflector radium white colour and including PCC (1:2:4) in foundation complete all as specified and directed. Note:- Excavation & related earth work shall be inclusive of quoted rates.

S&F in repair 1.5 Sqmm 3 core flexible copper conductor (industrial cable), PVC insulated and PVC round sheathed, 1100 volt, confirming to IS :694, drawn through steel pole from junction box to street light with proper lugs, fitting complete all as specified and directed. Note : The tools and plants required for repair / maintenance such as ladder, crane vehicle, menpower etc. shall be inclusive with the quoted rate.

M&L for contactor 63 Amp 4 Pole as per existing make for street light timer complete all as specified and directed.

M&L for disconnecting and taking down unserviceable SWR (Steel Wire Rope) of high mast light and S&F new SWR (Steel Wire Rope) of 6 mm dia shall be fabricated as per 'Marine Grade' - AISI Stainless Steel 316 of 7/19 including clamps, nuts, bolts, washers and other connected accessories, connecting and testing complete all as specified and directed.

M&L in repair for heavy duty copper wire of 4 sqmm 4 core for high mast light and other accessories, connecting and testing complete all as specified and directed.

M&L for GI pipe bracket, 40mm dia, medium grade, size 1.5 m long, single swan neck shape, suitable to fix on top of tubular pole with nuts, bolts and washers etc complete and including one coat of red oxide primer and two coats of aluminium paint / white synthetic enamel paint complete all as specified and directed.

M&L in repair for GI pipe bracket, 40 mm dia, medium grade, 1.20 m long and bend in 120 degree angle for mounting of street light pole of suitable size including two flat iron clamps, nuts, bolts and washers of suitable size and including one coat of red oxide primer and two coats of aluminium paint/ white synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted surface of street tubular poles of 09 metre height including cross arms, cable protection pipe with one coat of aluminium paint to a height from 1.5 m above ground level to top of pole and making alternate strips / layers (30 cm wide) with synthetic enamel paint upto the 1.5 meter height from ground level of colour as decided by Engineer-in-Charge complete all as specified and directed.

M&L in repair for timer switch electronic digital type of 40 Amp capacity for street light complete all as specified and directed.

M&L in repair for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 120 sq. mm 3.5 core complete all as specified and directed. Note :- Excavation, earth work, sand, brick and protection pipe shall be measured and paid seperately.

M&L in repair for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq. mm 4 core complete all as specified and directed. Note : Excavation,earth work,sand,brick and protection pipe shall be measured and paid seperately.

M&L in repair for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq. mm 4 core complete all as specified and directed. Note : Excavation,earth work,sand,brick and protection pipe shall be measured and paid seperately.

M&L in repair for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 sq. mm 3.5 core complete all as specified and directed. Note - Excavation,earth work,sand,brick and protection pipe shall be measured and paid seperately.

M&L in repair for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 sq. mm 3.5 core complete all as specified and directed. Note - Excavation,earth work,sand,brick and protection pipe shall be measured and paid seperately.

M&L in repair for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 70 sq. mm 3.5 core complete all as specified and directed. Note-Excavation,earth work,sand,brick and protection pipe shall be measured and paid seperately.

M&L in repair for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 95 sq. mm 3.5 core complete all as specified and directed. Note-Excavation,earth work,sand,brick and protection pipe shall be measured and paid seperately.

M&L in repair for (except cable) XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 300 to 400 sqmm 3.5 core complete all as specified and directed. Note : (i) Cable shall be issued under schedule 'B' free for fixing. (ii) Excavation, earth work, sand, brick and protection pipe shall be measured and paid seperately.

S&F in repair MCCB 4 pole, 160 Amps, 25 KA ,415 volt,AC thermal adjustable type between 70 to 100% including 4 spreader link set of same suitable for existing panel complete all as specified and directed.

S&F in repair MCCB 4 pole, 200 Amps, 36 KA ,415 volt,AC thermal adjustable type between 70 to 100% including 4 spreader link set of same suitable for existing panel complete all as specified and directed.

S&F in repair MCCB 4 pole, 250 Amps, 36 KA ,415 volt,AC thermal adjustable type between 70 to 100% including 4 spreader link set of same suitable for existing panel complete all as specified and directed.

S&F in repair MCCB 4 pole, 400 Amps, 36 KA ,415 volt,AC thermal adjustable type between 70 to 100% including 4 spreader link set of same suitable for existing panel complete all as specified and directed.

S&F in repair MCCB 4 pole, 125 Amps, 25 KA ,415 volt,AC thermal adjustable type between 70 to 100% including 4 spreader link set of same suitable for existing panel complete all as specified and directed.

S&F in repair MCCB 4 pole, 100 Amps, 25 KA ,415 volt,AC thermal adjustable type between 70 to 100% including 4 spreader link set of same suitable for existing panel complete all as specified and directed.

S&F in repair MCCB 4 pole, 63 Amps, 25 KA ,415 volt,AC thermal adjustable type between 70 to 100% including 4 spreader link set of same suitable for existing panel complete all as specified and directed.

Disconnecting & taking out the existing unserviceable LT panel and S&F new out door (Kiosk type) type LT panel, CPRI approved, factory assembled, out door type, weather & vermin proof (Protection Class IP-65), MS sheet 3.15 mm thick, powder coated over a coat of primer, double door (front & rear openable type), mounted on angle iron leg made of angle iron 40mm x 40mm x 6 mm and 45 cm high above GL and 15 cm embedded in ground with and including bocks of PCC 1:2:4 type C1 of block size 30x30x30 cm comprising of the following: (i) One MCCB, 4 pole, 250 Amp, 35/36 kA, 415 volts, thermal release, adjustable type (Ics=100%Icu) - 1 Nos. (ii) MCCBs, 4 pole, 415 Volts, 160 Amps, 25 kA- 2 Nos. (iii) Copper bus bar 400 Amp of length not less than 60 cm, 4 pole duly drilled with holes for cable connections. Note: - (i) All incoming/ outgoing cables shall be connected by suitable size gland plate /glands. And All spreader terminals of MCCBs should be connected with extension links (bus bar). (ii) Rate quoted is deemed to be inclusive of PCC foundation/pedestal and connected earth work. (iii) Panels shall be placed above 0.45 metre from ground level (iv) Outgoing Cables shall be fed with solid busbar connectors.

Disconnecting & taking out the existing unserviceable LT panel and S&F new LT Panel (415 Volts, 50 Hz , 3-phase, 4 wire supply) CPRI approved, factory assembled, outdoor type, weather and vermin proof (Protection Class IP-65) made out of 40mm x 40mm x 5mm angle iron frame and 3.15 mm(for external) and 2 mm (for internal) thick MS Sheet CRCA sheet with both side (front and back) hinged , double door opening for external, rubber lining, locking arrangement, painted externally and internally with two coats of synthetic enamel grey paint first quality over a coat of red oxide primer complete mounted on angle iron leg made of angle iron 40mm x 40mm x 5 mm and 60 cm high above GL and 15 cm embedded in ground with and including bocks of PCC 1:2:4 type B1 of block size 30x30x30 cm comprising of the following: (a) Copper Bus bar: - Bus bar chamber having 4 nos air insulated copper strip bus bars of rating not less than the 1.5 times the rated capacity of the incomer MCCB, as well as outgoings shall have aluminium TPN extension links (bus bar) of current carrying capacity not less than 1.5 times the rated capacity of individual MCCBs. (b) Incoming: - (i) MCCB 4 pole, LT 415 Volts, 50 Hz AC grade, 400 amps rating 4 pole,36 KA, Adjustable thermal and adjustable Continue....(at Serial Item No. 71.01)

Disconnecting & taking out the existing unserviceable LT panel and S&F new LT Panel (415 Volts, 50 Hz , 3-phase, 4 wire supply) CPRI approved, factory assembled, outdoor type, weather and vermin proof (Protection Class IP-65) made out of 40mm x 40mm x 5mm angle iron frame and 3.15 mm(for external) and 2 mm (for internal) thick MS Sheet CRCA sheet with both side (front and back) hinged , double door opening for external, rubber lining, locking arrangement, painted externally and internally with two coats of synthetic enamel grey paint first quality over a coat of red oxide primer complete mounted on angle iron leg made of angle iron 40mm x 40mm x 5 mm and 60 cm high above GL and 15 cm embedded in ground with and including bocks of PCC 1:2:4 type B1 of block size 30x30x30 cm comprising of the following: (a) Copper Bus bar : - Bus bar chamber having 4 nos air insulated copper strip bus bars of rating not less than the 1.5 times the rated capacity of the incomer MCCB, as well as outgoings shall have aluminium TPN extension links (bus bar) of current carrying capacity not less than 1.5 times the rated capacity of individual MCCBs. (b) Incoming : - (i) MCCB 4 pole, LT 415 Volts, 50 Hz AC grade, 320 amps rating 4 pole,36 KA, Adjustable thermal and adjustable Continue....(at Serial Item No. 72.01)

S&F galvanised tube of 40 mm bore, light grade with all fitting laid in trenches complete all as specified and directed.

M&L in repair for earthing with galvanised iron earth plate electrode 600mm x 600 mm & 6 mm thick buried directly in ground vertically (earth pit not less than 2.25 metre deep below normal GL) with top of earth plate not less than 1.5 metre below Ground level, connected to GI strip 32x6 mm (up to 7.5 metre) by means of GI nuts, bolts & washers , earth strip protected with & including 40 mm dia light grade GI pipe (up to 7.5 metre) all as shown in electrical plate No 3 of MES Schedule Part I, with & including PCC 1:3:6 type C1 for pit with cover of 50 mm thick RCC 1:1.5:3 type A1 reinforced with welded steel wire fabric not less than 4 Kg per Sqm, watering arrangements with 20 mm GI medium grade pipe , GI funnel with GI mesh, filling with common salt & charcoal in alternate layers, necessary excavation and earth works in any type of soil, including test point, testing & commissioning, complete all as specified and directed. Note :- 1. The insulation procedure shall be followed as per instruction of the earth electrode manufacturer. 2. GI pipe of suitable size for protection against mechanical damage of main earth strip from earth electrode to test point up to 7.5 metre to be provided. The cost for the same shall be deemed to be included in the quoted rate. GI strip & GI protection pipe beyond 7.5 metre shall be measured & paid separately. 3. If desired earth resistance is not obtained during testing ,the earthing shall be re-done with out any extra cost.

S&F 20 mm external dia Rigid non-metallic PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified and directed.

S&F in repair 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single pole and current carrying capacity 06 to 32 AMP, complete with connection testing and commissioning all as specified and directed.

M&L for boring of existing road / path upto 100mm for laying of GI pipe protection cover to the under ground cable and making good distrubed area / surface all as specified and directed.

S&F in repair Junction box, size 260x210x116 mm, thermoplastic polystyrene unbreakable suitable for pole mounted outdoor type IP-65 insulated complete with FI clamps & nuts, bolts, washers and including terminal block heavy duty with phase seperators between R,Y,B terminals, including one MCB SP 06 amp 10 kA, all duly fixed on din channel, cable glands for cable entry complete all as specified and directed. Make : Hensel or equivalent make as approved by GE.

S.R.Enterprises (BID ID -3465034)

M/S TRADE LINKERS (BID ID -3463930)

M/S Anil Enterprises (BID ID -3465173)

LAKSHMI ASSOCIATES (BID ID -3459215)

M/s Prakash Enterprises (BID ID -3459191)

DIVYA ASSOCIATES (BID ID -3464597)