Tender ID

Karnataka

Retender

Works

Buildings

Construction of Government Pre-University College Building at Kurnadu in Bantwal Taluk, Dakshina Kannada District Detaild Sub Estimate for Providing Electrification to Pre - University college Building at Kurnadu in Bantwal Taluk

Public Works Department

PWD Division Office Mangaluru | Karnataka

Amount: ₹9.1 LCloses: 6 Dec 2024Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published22 Nov 2024
Closed6 Dec 2024
Retendered22 Nov 2024

Cancellation Details

Retendered

RetenderedRetenderedReason: Retendered

Published 22 Nov 2024

Tender Value

₹9.1 L

EMD Value

₹22,815

Closing Date

6 Dec 2024, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

Executive Engineer

Office Number

Work Description

Construction of Government Pre-University College Building at Kurnadu in Bantwal Taluk, Dakshina Kannada District Detaild Sub Estimate for Providing Electrification to Pre - University college Building at Kurnadu in Bantwal Taluk

Tender Information

Tender ID

PWD/2024-25/BD/WORK_INDENT16547

Reference Number

PWD/2024-25/BD/WORK_INDENT16547

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD Division Office Mangaluru

Source Website

Subscribe to view

Documents Required

4 documents required · 4 mandatory

Technical Bid

RequiredAssessed available tender capacity

RequiredList of existing commitments and ongoing work

RequiredCLI - Chief Inspectorate of Electrical REGISTRATION CERTIFICATE

RequiredAttach profit & loss statement Certificate countersigned from Chartered Accountant

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidder shall pay Contract Management Module processing fees of 0.025 percent of the contact value (Min Rs.500/- and Max Rs.7500/-) soon after contract has been issued to bidder

The bidder shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs. The tender fee is non-refundable

The employer reserves the rights to reject one or all tenders without assigning any reason

The employer is not responsible for any delay in accessing E- procurement portal

Contractors should be registered with CLI -Chief Inspectorate of Electrical Registration and the tenderer should submit the Registration Certificate along with technical bid.

To qualify for award of this contract, each tenderer should give all details and documents as per Technical and Financial bid attached to this tender.

All the formats prescribed in the bid document shall be filled by the tenderer in complete manner otherwise it will be rejected.

All the scanned documents pertaining to bidder to be uploaded shall be in original and same originals should be produced to the Executive Engineer (at the time of Technical Bid Opening) who reserves right to verify the original documents before approval.

Contractors should follow strictly prevailing rules of labour act.

The Item rates quoted shall include cost of Royalty charges on construction materials and other taxes as per rates provided in prevailing Govt orders at the time of execution and including cost and conveyance of all materials curing, loading and unloading with all lead and lifts, labour, hire charges of machineries and equipment etc., complete and all other incidental charges. All the items shall be executed as directed by the Engineer-in-charge of the work.

All materials required for this work shall be procured by the bidder himself and should be got tested by the quality control authorities at his own cost before use on the work. Department will not supply any materials.

Materials like bitumen, steel,cement etc., required for the work shall be procured by the tenderer themselves and should get tested by the quality control authority at his cost before used on the work.

All documents should be uploaded by the contractor is to be attested by the authorized notary or not below the rank of Executive Engineer and should be produced for verification at any stage of process as and when sought for .Failure to produce original documents leads to rejection of Tender.

Units, Rates and Prices shall be quoted by the tender in Indian Rupees only

The contractor should maintain the work during the defective liability period, i.e. UP TO 01 year at his own cost

Contractors should have Registration of GST, Employers Provident Fund and tenderer should submit Registration Certificate along with technical bid.

Payment of EMD of Rs. 22,815.00 shall be through E payment

Technical Criteria

General

List of existing commitments and ongoing work

List of works for which tenders already submitted

Capabilities of Vendor

PWD REGISTRATION CERTIFICATE

Others -- CLI - Chief Inspectorate of Electrical Registration

3.1 Assessed available tender capacity - (AxNx2.5-B) where A -Maximum value of civil engineering works executed in any one year during the last five years (updated to current financial year price level)(FY in which tenders are invited) taking into account the completed as well as works in progress. N - Number of years prescribed for completion of the works for which tenders are invited. B - Value, at Current Financial year (FY in which tenders are invited) price level, of existing commitments and on-going works to be completed during the nextup to 2 months. (Period of completion of the works for which tenders are invited)

Others -- Existing & Ongoing Commitment Statement

Financial Status

To qualify for award of this contract, each Tenderer in its name should have in the last five years (i.e. 2019-20 to 2023-24) (a) Achieved in at least two financial years a minimum financial turnover (in all classes of engineering construction works only) of Rs.9.13Lakhs

Others -- profit and loss statement ,Balance sheets certified from an Registered Chartered Accountant

Work Locations

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹22,815

Important Dates

Last Activity

22 Nov 2024

Published

22 Nov 2024

Bid Opening

7 Dec 2024

Download Ends

5 Dec 2024

BOQ Preview

•

Concealed Conduit System Supplying heavy gauge PVC conduit pipe ……mm dia .mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before...

•

Supplying heavy gauge PVC conduit pipe ……mm dia .mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The...

•

Supplying heavy gauge PVC Conduit Pipe ….dia .mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement...

•

Open Conduit System, Supplying heavy gauge PVC conduit pipe . dia . mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs i...

•

Open Conduit System Supplying heavy gauge PVC conduit pipe . dia . mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in...

•

Supplying and fixing PVC/metal conduit Deep junction box. ---- including cost and conveyance of all materials all lead and lift, loading and unloading, hire charges of machinery and equipments, transp...

•

Supplying And Fixing Metal Fan Box with Round Hook. ---- including cost and conveyance of all materials all lead and lift, loading and unloading, hire charges of machinery and equipments, transportati...

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall -...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293. ---- including cost and conveyance o...

•

Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. Is 3854 and IS 1293 ---- including cost and conveyance of...

•

Wires and Cables-Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

•

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...

•

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curr...

•

Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH, KVAR suitable for 3 phase, 4 wire LT network with ...

•

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 Amps three phase 4 wire whole current class-1 Accuracy Energy Meter. ---- including cost and conveyance of all materials all le...

•

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440v A.C. 50 Hz 12/24v D.C. ---- including cost and conveyance of all materials all lead and lift, lo...

•

Supplying, fixing and wiring 50/5 to 400/5A 5VA burden Current Transformer Class 0.5 accuracy with Tape Wound. ---- including cost and conveyance of all materials all lead and lift, loading and unload...

•

Supplying . A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are ...

•

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. --...

•

Fabricating supplying and mounting MS box made out .SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped wi...

•

Supplying of .feet -PVC Batten with integrated LED tube.W with high quality

•

diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input:220-240V@ 50/60Hz & Power factor ...

•

Supplying & fixing of retrofit type - LED bulb . W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI70%. efficacy 80 lumen per W, life 25000 burning hours and Compliance ...

•

Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...

•

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. 12" Sweep (300mm) ---- including cost and conveyance of all materials all lead and...

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...

•

Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wire...

•

Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary lengt...

•

Extra length of GI pipe of class B 19mm dia for down rod. ---- including cost and conveyance of all materials all lead and lift, loading and unloading, hire charges of machinery and equipments, transp...

•

Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose w...

•

Supplying and fixing one of 230 V Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote. ---- including cost and conveyance of all...

•

Supplying, erecting, testing & commissioning of OFF- LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with all accessories complete and Excluding batteries and wiring complete. ---- i...

•

Supplying, installation, testing & commissioning of 12V .AH batteries in poly propylene container for D.G. sets. Low maintenance batteries, plate type. ---- including cost and conveyance of all materi...

•

Supplying of 1.1 KV ,XLPE or Heat reisistant PVC insulated , PVC extrusted inner seath Armored , LTUG Cable as per IS-1554 ( Part-1) or IS-7098 Part-1 , Armouring strip thickness and resistively as pe...

•

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...

•

Laying of cable in existing Trench / GI Pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminium Rollers as directed by the departmental staff. LT Cable ---- including cost and conveyance of all materials...

•

Supplying of Cable gland ,.( COMMON Electrical SR of 2023-24, BESCOM-PART -II,Rates for Material of Major Works ) ---- including cost and conveyance of all materials all lead and lift, loading and unl...

•

Supplying of Haevy Duty Copper Terminal Long Barrel,.( COMMON Electrical SR of 2023-24, BESCOM-PART -II,Rates for Material of Major Works ) ---- including cost and conveyance of all materials all lead...

•

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

•

GI/Copper strips for grounding connections, using necessary fixing materials as required.( COMMON Electrical SR of 2023-24, Part - III , Utilization ( PWD Electrical ) ---- including cost and conveyan...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

bid_document_kw-1-16547.doc

Tender Document • 1.16 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Tender ID

Karnataka

Retender

Works

Buildings

Construction of Government Pre-University College Building at Kurnadu in Bantwal Taluk, Dakshina Kannada District Detaild Sub Estimate for Providing Electrification to Pre - University college Building at Kurnadu in Bantwal Taluk

Public Works Department

PWD Division Office Mangaluru | Karnataka

Amount: ₹9.1 LCloses: 6 Dec 2024Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published22 Nov 2024
Closed6 Dec 2024
Retendered22 Nov 2024