SPECIAL REPAIR TO INSPECTION GALLERY OF SWIMMING POOL AND OUTSIDE DRAINAGE SYSTEM AT SWIMMING POOL AND PROVN OF CERTAIN REVENUE MINOR WORK PERTAIN TO BR AND EM UNDER GE MAINT INFANTRY SCHOOL MHOW

Amount

Excavating in trenches n. exc 1.5 m width and n. exc 1.5 m in depth for foundation or etc or for shafts , wells , cesspits , manholes , pier holes etc n exc 10 sqm on plan and n exc 1.5 m in depth orgetting out in soft/ loose soil complete all as specified and as directed.

Returning filling in ,including spreading ,levelling,watering and well ramming in layers n exc 25 cm soft/ loose soil complete all as specified and as directed.

Removing excavated material exc 250 m but n exc 500 m distance and depositing as directed at a level n exc 1.5 m above the starting point all as specified and directed.

Removing excavated material not exc 50 m distance and depositing as directed at a level n exc 1.5 m above the starting point all as specified and directed.

Demolition by breaking up drain pipes (salt glazed stoneware or AC/RCC) any dia jointed in cement mortar and taking out of trenches and removing the debris including concrete bed and haunching from the trenches all as specified

Material and Labour for PCC 1:4:8 type C2 using 40 mm graded stone aggregate as in bed drain pipes of 150 mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Material and Labour for PCC 1:4:8 type C2 using 40 mm graded stone aggregate as in bed drain pipes of 100 mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Material and Labour for 150 mm internal dia Salt-Glazed stone ware drain pipes laid in trenches in concrete padding jointed in cement mortar 1:1 all as specified and directed.

Material and Labour for 100 mm internal dia Salt-Glazed stone ware drain pipes laid in trenches in concrete padding jointed in cement mortar 1:1 all as specified and directed.

Demolition of plain cement concrete of any description and in any position not otherwise specially provided for complete all as specified and directed at site.

M & L PCC(1:4:8) type D-2 using 40mm graded stone aggregate in foundation mass concrete and filling comlete all as specified and directed.

M &L PCC(1:3:6) type C-2 using 40mm graded stone aggregate in foundation mass concrete and filling comlete all as specified and directed.

Material and labour for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in benching to man holes including forming channel and finishing with extra cement complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded cruched stone aggregate) as in benching, coping etc including necessary form work all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position (Reinforement cut as required to facilitate demolition) complete all as specified and as directed.

M & L for precast RCC (1:2:4) type B-1 ( 20mm graded agg ) as in man hole cover chajjas landing cover slab, shelves etc and set in cement Mortar 1 : 4 complete all as specified and as directed.

M&L for TMT bars 6 to 8mm dia cut to length bent to shape required including cranking bending spirally for hooping for column hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.

Demolition of brick works built in cement mortar including all quoins pillars arches etc including PCC benching/coping etc complete all as specified and as directed.

Material and labour for brick work with sub class ‘B’ bricks using modular size bricks straight or curved on plan exceeding 6m mean radius built in cement mortar (1:4) complete all as specified and directed.

Material and labour for brick work with sub class ‘B’ bricks using modular size bricks straight or curved on plan exceeding 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

All as per item No 20 but except bricks and (Re-use the old serviceable bricks) complete all as directed and specified.

Taking down cement plaster on brick or concrete surfaces, parapets including raking out joints hacking for ket scrubbing down with water etc complete all as specified and as directed

M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement

Preparation of new plastered surface and apply two coat of cement base paint over a coat of primer complete all as spd and directed

M&L cleaning of sewage line, SWG/CI pipe or RCC pipe vertically/horizontally of dia n.exc 200 mm bore by rodding well flushing by using sufficient water and making it to clear for easy flow of sewage from WC gully trap Nahani trap including desludging of and making it the proper functional to entrie satisafaction of Engineer-in-Charge and removing the sludge out side MD land and burying it in pits and covering with earth and spreading hydrated time @ 1 Kg per Sqm of covered area complete all as specifed and directed .

Cleaning of septic tank by desludging, distilling and getting out all silts and sludge, organic and inorganic materials by manually/mechanically and removing the sludge and burying it into the pits and covered with earth including spreading hydrated lime 1 Kg per pit complete all as directed at site.After complete cleaning of septic tank the manhole cover will be refixed in same position with CM 1:4 and bleaching powder spread on top surface of septic tank @ 1 Kg per septic tank complete all as specifed and directed .

All as per item No 26 but for manhole complete all as specified & directed.

Cutting into existing manholes for connecting new drains/pipe, making good to pipe and rendering, cutting out existing benches for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 smooth finished, and reforming benching as required for 150mm internal dia for pipe all as specified and directed

Demolition of stone slabs, paving stones and tiles of any description and thickness in floors, aprons, laid, bedded and pointed in any mortar complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment (glossy finish )any shape and size conferming to IS 15658-2006 of 60 mm thickness ,M-35 grade complete all as specifed and directed .

M & L 30mm thick stone grit cushioning/stone grit filling under pavement incl watering, consolidationg with clean dry sand , complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15cm thickness (below or above ground level) complete all as specified and directed .

M & L for 75 mm thick cement concrete (1:3:6), type C2, with using 40 mm graded stone aggregate in floor/plinth protection, finish the surface even and smooth without using extra cement including filling the expansion joints with bitumen filler/filler boards complete as specified and directed.

S&F in repairs wash basins, vitreous China white flat back size 580x450mm size, including cutting for and pinning in ends with & incl MS adjustable brackets or erecting stand complete all as specified and directed.

M&L for wash basins, vitreous China white flat back size 580x450mm size, including cutting for and pinning in ends with & incl MS adjustable brackets or erecting stand complete all as specified and directed.

M&L fixed in repair vitreous China wash down water closet pan (pedestal pattern), white including connections to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe etc complete all as specified and directed.

Supply & fixing in repairs vitreous China squatting pan, 'Orissa' pattern, size 580x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti syphonage pipe, etc. comple including making good to floor complete all as specified and directed.

Supply & fixing of vitreous China squatting pan, 'Orissa' pattern, size 580x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti syphonage pipe, etc. comple including making good to floor complete all as specified and directed.

Supply & fixing in repairs plastic water closet seat cover for pedestal pan, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S & F of PVC 10 liters capacity valve less syphonic action type flushing sistern ,low level white with inlet ,ball valve ,float and handle including bracket with flush pipe etc.complete all as spesified and directed at site.

S&F in repair health faucet with flexible pipe of one mtr length including wall hook for EWC complete all as specified and as directed. .

S&F in repair water jet spray CP 15 mm bore size along with PVC cord to EWC complete all as specified and as directed. .

S&F in repairs of (SWR) 'P' trap 125/110mm complete all as specified and directed.

S&F of framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0

S&F of rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 290 Grade E-165 omplete all as specified and directed .

Dismantling of cast iron/pvc pipes jointed in cement mortar 110 / 75 mm bore all as specified and directed

S&F of 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall / floor complete all as specified and directed..

S&F of 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall / floor complete all as specified and directed..

S&F of 110 mm bore PVC ( SWR) bends all as specified and directed

S&F of 75 mm bore PVC ( SWR) bends all as specified and directed

S&F in repair of Cast iron oval access door cover with bolts and rubber gasket to make it water tight for 100mm bore CI bends as in repair complete all as specified and directed by Engr-in-Charge

S&F in repair of Cast iron oval access door cover with bolts and rubber gasket to make it water tight for 75mm bore CI bends complete all as specified and directed by Engr-in-Charge.

S&F in repair of CI iron 'P' or 'S' traps 100mm dia complete as in repair complete all as specified and directed by Engr-in-Charge.

S&F in repair Cast iron bends (sand cast) for 100 mm dia, disminishing pieces or tapers (larger bore measured) for following sizes as in repair Complete all as specified and directed:-

S&F in repair Cast iron bends (sand cast) for 75 mm dia, disminishing pieces or tapers (larger bore measured) for following sizes as in repair Complete all as specified and directed:-

S&F in repair of Cast iron branch pieces double 100mm dia (equal or unequal) ordinary or inverted (spigot or socket type or with parallel branches) with oval access door complete all as specified and directed by Engr-in-Charge

S&F in repair of 75mm dia cast iron (sand cast) soil waste & vent pipes in any length with ears, with cement joints laid fixed to wall complete all as specified and directed by Engr-in-Charge

S& F in repair 100 mm dia cast iron (sand cast) soil waste & vent pipes in any length with ears, with cement joints laid fixed to walls complete all as specified and directed by Engr-in-Charge

S&F in repair of Cast iron floor trap 100mm outlet dia with grating including joints to waste pipe fixed in cement concrete type B1 (1:2:4) using 20mm graded crushed stone aggregate

Cutting of grass, branches etc manually and cleaning away all grass vegetating saplings shrubs, bush, wood, taking out loose and removing to a distance not less than 500m from any point of cutting and finally deposited where directed by Engr-in-Charge

Dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing ) and rubbish of the primeses complete all as specified and directed.

Application of Primer coat with mix of ShaliCrete/Liquid crete, a single componenet multifunctional acrylic polymer/ equivalent as above and cement in (1:2) ratio and applying @ 1Kg/Sqm of the mix and allow it to dry for 3 to 4 Hrs complete all as specified and directed.

Supply only Liquid water proofing compound (ISI marked) complete all as spesified and directed.

M&L for 25mm thick PCC (1:2:4) type B-0 using 12.50mm graded crushed stone aggregate as in sub base, levelling course, etc complete all as specified and as directed.

M&L for non –skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1: 6) complete all as specified and directed.

All as per item No 65 above but as in skirting/ dado etc with and including 10mm thik backing coat in cement mortar (1:4) an wall complete all as specified and as directed.

M&L for non –skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1: 6) complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size (450x300)x7 mm thick as on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match over 10 mm thick backing coat on fair faces of brick work in CM (1:4) complete all as specified and as directed.

M & L for 10mm thick joint free 'Endura cool roof (SRI) tile' in light shed floor tiles (square/ rectangular) area of each tiles exc 0.09 sqm but n exc 0.18 sqm,in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed.

S&F of fabricating powder coated aluminium frame work,door shutter ,windows , ventilators, partisions with one or more rebates sections of approved tint as required for partions including beading,cleat, screws,fasteners, plugs, for fixing with wall/ceiling columns/beams etc complete all as specified and directed.

S&F of aluminium power coated window and ventilator shutters, sliding type without sash bar alu section weighing 0.55 kg/m including necessary locking arrangement, guide wheels, joining cleats, glazing clips rubber packing anodised alu snap beading screws etc complete all as specified and directed.

S&F of aluminium power coated door shutters, aluminium section weighing min 0.55 Kg/m including necesssary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door, pad lock, hinges, anodised aluminium snap beading screws etc complete all as specified and directed. .

S&F 5 mm thick plain or tinted glass, ordinary quality including rubber gasket for packing and fixed to aluminium doors/window/partition incl necessary cutting / moulding and chamferrring of edges for service window/counters complete all as specified and directed.

S&F of prelaminated particle board 18/19mm thick interior grade, prelaminated on one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame works as in cupboard shutter / cupboard shelves, pelmet, with and including external teak wood lipping 6mm thick and 18/19mm wide fixed with nails on edges complete all as specified and directed.

M&L for hardcore of gauge n exc. 63 mm,of broken stone deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for moorum / red bajri filling in floors or pavings, laid in layers nexc 15cm thick, spread, levelled and rammed including waterring and consolidation complete all as specified and directed.

M&L application of three coats of white wash including preparation of surfaces on wall complete all as specified and as directed

Excavating in post holes (or similar holes) in soft/loose soil each not exceeding 0.5 Cum, getting out, reterning filling and ramming earth or broken rubber mixed with earth around in layers not exceeing 25 cm, watering and removing surplus soil to a distance not exc. 50m and making good surface complete all as specified and directed.

S & F steel work in tubular/Rolled trusses,purlins,rafters,tubler column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washers etc. complete using ERW or induction butt welded tubes confirming to Fe 410W grade E 250 quality B, etc complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint on new or previously untreated steel surfaces exc 10cm width or girth over a coat of red oxide zinc chrome primer including preparation of surfaces complete all as specified and directed.

S&F of 0.50 mm thick (total coated thickness) pre-colour, pre-profiled (Manglore pattern)(Galvalume/Zinkalume) sheets of required colour and design having tensile strength of 550 Mpa,zink colour coating AZ-150 as in roof, wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer/profile maker instruction complete all as specified and directed. Make:-JSW Colouron Plus,Tata blue scope,Everest or equivalent as directed by Engr-in-Charge.

M&L for rendering 10mm thick in CM (1:6) on brick or concrete surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for TMT bar 10 mm dia and over, cut to length, bent to shape required ,including cranking ,bending spirally for hooping for columns,hooking end and binding with and including mild steel wire and annealed not less than .9 mm dia or securing with clips complete all as specified and directed.

M&L in for 18 mm thick Black granite slab of approved quality of any size bedded and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including 15 mm thick screed bed in CM (1:4) including granite polish to be done by mechanical grinder and moulding edges complete all as specified and directed.

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar(1:6) on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

M&L form work to suspended slab as in kitchen shelves etc. complete all as specified and directed.

S&F 15mm bore Long body bib taps chromium plated fancy type,screwed down , screwed for iron pipes or brass ferrule complete all as specified and directed.

M & L for preparation of new plastered surface of wall and applying two coats of oil emulsion distember over a coat of over a coat of cement primer over a coat of JK/Birla wall care putty complete all as specified and directed.

S&F of steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc ,for 15mm bore pipes complete all as specified and as directed.

S&F of steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc ,for 20mm bore pipes complete all as specified and as directed.

S&F of PVC connection 15mm size with PTMT nuts of length 450 mm long complete all as specified and as directed.

S&F of PVC waste pipe for urinal/wash basin/ sink pipe 32mm bore 65cm long complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and directed.

M&L for Cutting out of brick work built in CM (1:6), forming toothing for, and bonding new into old work including value of new materials entering old walls and jointing and pointing (measured on vertical face in contact with old wall only) complete all as specified and directed.

Rounding to edges of stone slab slab one edge such as in steps,cooking platform,and other similar situation complete all as specified and directed.

M&L for mild steel works as in hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 etc complete all as specified and directed at site.

M&L for Mild steel bolts, exc 11 but n. exc 15 and 75 mm long purpose made, with hexagonal or square head one end and screwed the other, or screw both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 30cm long etc complete all as specified and directed at site.

supply only for Chain link fencing MS galvanised chin link etc complete all as specified and directed at site.

Fixing only chain link fencing including line wire any mesh size and any type of standard rail s staining bolt etc including provision of binding wire etc complete all as specified and directed at site.

S&F of SS health faucet with long flexible hose and hook wall mountated,1.00to1.50 mtr length of hose pipe proper arrangement for EWC complete all as specified and as directed. Make Prayag/JOHNSON AQUA/Jaquar /PLUMBER.

S&F of 15 mm dia two way bib cock with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe and fixed in repairs complete all as specified and directed by Engr in charge. Make Prayag/JOHNSON AQUA/Jaquar /PLUMBER.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out incl cutting bushes etc along the new drainage line.

S & F pre - painted galvalume aluminium zinc coating GI based plain steel sheeting 0.5 mm thick of required colour and shape having tensile strength of 550 Mpa as in ridge valley,gutters,bridge board,roof covering / cladding to wall, fixed with self tapping screwes complete all as specified and directed.

S&F of Solid PVC moulded door frame of size 50mm X 47mm made out of 5mm prelam PVC sheet reinforced with MS Square tube, and edges will be painted to match with prelam sheet supplying and fixing in opening as per specification and drawing.

S&F of factory made PVC moulded door shutter , 28 to 30mm thick (styles) with2,4, or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm prelam PVC sheet on back face , supplying and fixing in frame at site as per specification and drawing.

Supply and fix of stainless steel butt hinges 100mm size medium weight and fixed as directed and specified.

Supply and Fix of Aluminium anodised barrel tower bolts of extruded section, 150mm long as specified.

Supply and Fix of Extruded aluminium alloy handles fabricated type anodised 150mm size as specified.

S&F of vitreous china urinal bowl urinal flat back, size of 465x355x265mm white (min)with grating and union for discharge pipe, urinal spreader with waste pipe and all fiting for urinal.

Supply and Fix of Pillar tap 15mm bore, cast copper alloy,with capstan heads, chromium plated, screwed down, high pressure with long shanks and fly nuts, screwed for iron pipe complete.

Supply and Fix of stop angle valves 15mm bore, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions fixed.

Supply and Fix Stainless steel grating dome 125mm dia with or without waste holes as required.

Supply and Fix PVC (SWR) floor traps 100 mm dia with stainless steel grating including jointing to waste pipe complete as directed and secified.

Supply and Fix PVC (SWR) junction single, (Single T) equal or unequal with access door, for 75 mm bore pipes all as specified and directed.

Supply and Fix PVC (SWR) junction single, (Single T) equal or unequal with access door, for 110mm bore pipes all as specified and directed.

M & L for half brick work with sub class 'B' modular bricks , straight or curved on any radius built in CM (1:4) in half brick thick walls complete all as specified.

M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) coloured,textured, designed as required area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed bed in 1:6 CM complete all as specified.

Cutting and moulding of edges of kota/marble stone to be fixed on wash basin counter, steps etc both front edges (top and bottom) to be smoothened complete all as specified and as directed

M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc.and making good of surface,cutting not exc 10cm girth complete all as specified and as directed.

S&F of Bib cock for 15 mm dia with extended lever handle and wall flange complete all as specified. Cat No. FLR-5043 of Make Jaquar or equivalent

S&F of angle stop cock with wall flange for 15 mm dia complete all as specified. Cat No. CON-059KN of Make Jaquar or equivalent

S&F of single piece-WC of size 840-x390x720 mm, fixed with 'S' trap at 300 mm distance incld all necessary fittings like jet and flexible pipe etc complete all as specified and as directed. Cat No. VGS-WHT-0207 of Make Jaquar or equivalent

S&F of table top Basin of size 855 x 530 x140 mm with coupling complete all as specified. Cat No. VGS-WHT-0559 of Make Jaquar or equivalent

S&F of pillar tap (push type) complete all as specified and as directed. (Make :- Jaquar cat Part No PRS-031 or equivalent)

S&F of soap dispenser with glass bottle complete all as specified.Cat No. CAN-1135N of Make Jaquar or equivalent

S&F of toilet roll holder with flap complete all as specified. Cat No. CAN-1153N of Make Jaquar or equivalent

S&F of corner glass shelf (with bracket) complete all as specified and as directed.Cat No. CAN-1173 of Make Jaquar or equivalent

S&F of Towel Rack 600mm long without lower hangers but with 3 hooks complete all as specified. Cat No. CAN-1181 FHN of Make Jaquar or equivalent

S & F of aluminium anodised tubular towel rail 20mm dia “D” type 60 cm long between flanges incldg brackets complete all as specified and directed

S & Fof fancy type chromium plated wall mixture with provision for over head shower with 190 mm long bend pipe and wall flange,screwed down,screwed for iron pipe 15 mm bore or brass ferrule complete all as specified and directed at site.

S & F of for brass chromium plated shower rose 90 to125 mm size with swivel joints,and connecting rod including fixing to steel pipe or union complete all as specified and directed at site.

S&Fof sheet glass shelf assembly, approved make, consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete

S & F of 110 mm bore PVC (SWR) vent cowl complete all as specified.

Taking down chowkhats or frames with shutter (without taking of shutter from the frames) area n. exc 1.5 sqm each complete all as specified and as directed.

S&F of 300mm long aluminium alloy anodised aldrop door bolt including fixing clips of sheet, cast or extruded sections and fixing bolts and 16mm dia bolt of sliding bolts of extruded sections complete all as specified and as directed.

M&L For cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable ofv size 70 sq mm.

M&L For XLPE insulated , screened, PVC bedded,galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor , 11000 volts grade cross sectional area 70 sq mm, 3 core Comoplete all as specified and directed.

M&L for sand cushioning for under ground cable Complete all as specified and directed

Supply and laying of Old size sub class ‘B’ bricks, laid in trenches as cable covers complete all as specified and directed.

Supply and laying in trenches/under floors or roads/along the poles or wall GI tube'Light' grade of 80 mm dia size for protection of UG cables including sealing ends & all required fittings all as specified & directed

S&F of air cooled split unit air conditioner electric driven, single phase of capacity of 1.5 TR, BEE 5 star rated complete all as specified and directed by Engr-in- charge. Make: Voltas/ LG/ Blue star.

S&F of Voltage stablizer for automatic operation single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stablizer at 230V with accuracy of +/- 2.5% and of capacity 5 KVA. Complete all as specified and directed. Make : V Guard/Capri/ ACUBE

S&F of sheet metal earth plug, socket, single pole and neutral with single pole MCB 32 Amp 240 Volts Complete all as specified and directed.

S&F of 16 Amp MCB rating 2P+ E Complete all as specified and directed.

M&L for Sub main wiring with four runs of single core FR LS PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in and including non metallic rigid PVC conduit of not less than 25 mm dia concealed in wall by cutting chases of wall and making good the disturbed surface, including two runs of FR LS PVC insulated unsheathed 6.0 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly from main distribution boardcomplete all as specified and directed by Engr-in-Charge.

M & L for Point wiring with FR LS PVC insulated PVC unsheathed electric cable 1100V grade single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area drawn in & including non metallic rigid PVC conduit ISI marked medium grade not less than 20mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good and matching disturbed surface of wall with existing surface of wall (cutting except on ceiling for fan point only, on ceiling instead of PVC conduit surface casing caping will be used) & 1.5 sqmm green FR LS PVC insulated unsheathed copper conductor as earth wire connected to earth dolly by providing lugs including galvanised boxes and bakelite sheet for mounting switches, sockets, fan regulators etc are as under.

(a) One light point/fan point controlled by one switch

(b) One 5amps socket out let point controlled by one switch on same board with other switches.

(c) One 5amps socket out let point on independent board controlled by one switch.

All as per item no-148 here in before but using PVC insulated unsheathed 2.5 sqmm cross sectional area cable for phase /neutral & for earth 2.5 Sq mm green PVC insulated cable for 15 amps socket point on independent board controlled by one switch.

S&F of switch piano flush button single pole one way 5 Amp 240 volt complete as directed.

S&F of socket outlet flush type 5 pin, 5 amps, 230 volts complete all as directed.

S&F of switch piano flush button single pole one way 15 Amp 240 volt complete as directed.

S&F of socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 230 volts complete as directed.

S&F of ceiling rose surface bakelite three terminal complete all as directed.

Supply and fix integrated LED tube light fitting 1x18/20 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of PVC square boxes complete all as specified and directed. Make:- Havells Cat No. LHEXBLP7PN1W018 / LUMILINEPLUSBS18WLED865SPCSS, Bajaj cat Pt No. BCLSB 18WH / BCLSBAL18WCW or equivalent in Wipro

Supply and fix integrated LED tube light fitting 1x9/10 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of PVC square box complete all as specified and directed .Make:- Havells Cat No. LHEXBLP7IN1W009 Bajaj Cat Pt No. BCLSB 10 WH or equivalent in Wipro

Supply and fix LED street light fittings 1x25 Watt, 5700K complete fitting having pressure dia cast aluminium housing with heat resistant toughened glass & IP 65 protection fixed on and including sufficient length and appropriate size GI bracket with all accessories duly connection with three core flexible copper cable complete all as specified and directed .Make:- Havells Cat No.ENDURAPEARLSL25WLED757SASYTOPCMP Crompton Cat No. LSTO-25-CDL, Bajaj Cat No. BCLST 25W LED IV2 / BCLST 25W LED

Supply and fix double door SPN DBs eight way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral complete all as specified and directed by Engr-in-Charge.

S & F MCB SPN 6 to 32 amps 10 KA, 'B' series including connection with suitable size aluminium / copper lugs including taking down the existing complete all as specified and directed by Engr-in-Charge.

S&F MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'B' series including connection with suitable size aluminium / copper lugs complete all as specified and directed by Engr-in-Charge.

Supply and fixing of Exhaust fan of 300mm sweep, 230 Volts single phase, 900 RPM, complete with all accessories like nuts, bolts, louvers, shutters etc including making hole of appropriate size and matching with the existing surface of wall complete all as specified and directed by Engr-in-Charge.

M&L for Sub main wiring with two runs of single core FR LS PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in and including non metallic rigid PVC conduit of not less than 25 mm dia concealed in wall by cutting chases of wall and making good the disturbed surface, including FR LS PVC insulated unsheathed 4.0 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly from main distribution board complete all as specified and directed by Engr-in-Charge.

M/S Sunshine Construction

KAILASH CHANDRA KHANDELWAL