Restoration, interior, M.E.P., HVAC and other allied works of Govt. House, Fort Area, Moti Daman (E-30139)

Amount

Civil work

(A) ENABLING WORKS AND PROTECTION WORKS Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer?in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding

Net Covering: Providing and Installing vertical safety /protection net all around the building scaffolding including all temporary support. tying, bracing. etc. all complete. These net should be black color polypropylene net.

Careful Shifting of cupboards, benches, loose furniture etc stored from the hall/verandah's/chamber's and other working areas. The clearing should be done with utmost care to avoid any breakage of Historic furniture or damage to architectural features of the building.

Careful Packing of sculpture details/ decorative grill work/ delicate tracery / AC indoor & ODUs / Furnitures / and statuary in bubble wrap plastic sheet with masking tape and duck tape to ensure absolutely no damage to the details during the site works.

Propping with steel to support the leaned structure ( roof and wall) using pipes, channels, angles, girders , wooden wages to prevent further leaning/ collaps

Providing & placing / fixing 08 mm thick plywood protection of floors ,other openings etc. during execution of work. The rate is inclusive of fixing charges with nails, screws etc complete.

Providing and laying high density plastic sheet of 5 mm thickness on the floor and other areas for protection and over temporary platforms during restoration works. The plastic sheet to be of the best and approved quality available in market and as approved by the Engineer incharge.

(B) DISMANTLING & DEMOLISHING WORK Disconnecting, shifting, turning and removing Water Tank for repairs and testing after repairs and fixing in position with all connection etc complete.

Removing and lowering down ceiling like wooden boarding from ATIC or false ceiling boarding/gypsum/ POP/ Bison board false ceiling carefully and stacking the same in the compound wherever directed by Engineer In Charge.

Removing the existing design MS / CI grills fixed below windows at open verandah, sitout area & other locations. The grills should be removed carefully without causing damage to the adjacent structures & grills too. The grills should be handed over to the Client & to be stacked at designated place in coordination with EIC.

Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

Removing the existing cement/lime plaster internally & externally of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 Metre or spreading in the compound and cleaning the site etc. complete.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Dismantling the existing timber sections like joists, rafters, posts, purlins, planks etc. atany height and any floor of building along with ceiling of verandahs, court rooms,etc. taking due care forthe safety of the adjacent members, stacking the material separately and stacking at site with identification, marking with consultation of site Engineer, Architect etc. complete.

Removing old paint from steel and other metal surface and making the surface even withhand scraping or by mechanical means etc. complete.

Removing the debris of the existing building by mechanical means above 50 m from campus up to 5 kilometer or any approved dumping yard as shown by department, including loading unloading and transportation.

C-STRUCTURAL & INTERIOR WORKS. C-STRUCTURAL & INTERIOR WORKS. Providing encasement to columns/ beams/ Pardi etc with free flow high strength non shrink micro concrete M-35 using single components and added with 100% by weight saturated dry stone aggregates water cement ratio shall be maintained properly as per manufactures specifications to achieve dense solid mass prepared micro concrete shall be poured properly as per in pre fixed holding boards slurry tight form work properly aligned to required size and shape and well oiled air bubbles if any shall be removed by tapping the boards removing the boards after 24 hours and curing the micro concrete thoroughly for 14 days cost inclusive curing etc. Complete.(Excluding reinforcement and preparation of damaged surface)

Filling of small pockets of any size in wall with brick bats or small pieces of bricks in lime mortar 1:4. This works to be carried out with prior intimation to the EIC. This item to be executed where all the small undulation pockets appears post plaster removal & also to make the wall in line prior to start plastering. (Consider Depth upto 115 mm).

Providing and fabricating structural steel works in rolled sections like joists, channels,angles, tees etc. as per detailed designs and drawings including fixing in position with connecting plates,braces and welding, riveting, bolting as necessary etc.complete.

Stone stitching in cracked stone patties, beam,and lintels. Providing and fixings of kota stones/tiles of 90cms length &width 15cm . The kota stones & tiles fixing with cement and araldite mixture in such a way that the entire length of stones complete contact with bricks/stone walls & fill the cracks.

Providing and casting in situ cement concrete M-25 of trap metal for R.C.C. Slabs and landings above 12.5 cm thickness and upto and inclusive of 15 cm thickness as per detailed drawings and designs including centering, formwork, compacting, finishing the formed surface with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing. (Excluding steel reinforcement) (Minimum Cement Content per Cum=380 Kg/M3)

Providing and fixing in position bar reinforcement / Tor Steel bar reinforcement (FE 550 D) of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams, columns,canopies, staircases, newels, chajjas, lintels, pardies coping, fins, arches, etc. as per detailed designs,drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete including application of Fusion Bonded epoxy paint complete as directed by EIC..

Drilling and boring through 300 mm thk masonry walls ( horizontal / angular) as required to create passage for cables, a/c tubing ducts 150-230mm dia as per architectural requirements, all labour, plant , tools , skilled manpower etc. complete including grouting / filling and making good. Core cutting machine to be used to make hole. Manual breaking is not permitted.

Drilling and boring through 450 mm thk masonry walls ( horizontal / angular) as requiredto create passage for cables, a/c tubing ducts 150-230mm dia as per architectural requirements, alllabour, plant , tools , skilled manpower etc. complete including grouting / filling and making good. Core cutting machine to be used to make hole. Manual breaking is not permitted.

Drilling and boring through 600 mm thk masonry walls ( horizontal / angular) as requiredto create passage for cables, a/c tubing ducts 150-230mm dia as per architectural requirements, alllabour, plant , tools , skilled manpower etc. complete including grouting / filling and making good. Core cutting machine to be used to make hole. Manual breaking is not permitted.

Drilling and boring through 750 mm thk masonry walls ( horizontal / angular) as requiredto create passage for cables, a/c tubing ducts 150-230mm dia as per architectural requirements, alllabour, plant , tools , skilled manpower etc. complete including grouting / filling and making good. Core cutting machine to be used to make hole. Manual breaking is not permitted.

Providing/supplying and fixing of Helifix make Hi-Fin reinforcement bars - HeliBar having 6mm Dia. MOC. Austenitic Stainless Steel, ASTM 304, having cross section area of 8.3 mm² withUTS 1150 N/mm² at various places where there is cracks in Stone Masonry/Arches as directed by structural engineer. Item to include supplying and fixing of HELIFIX makeHELIBOND Grout a Special cementitious grout with low expansion, non-gassing and injectable withexceptional thixotropic properties is to be used to bond the stainless steel Hi-Fin reinforcement bars andpins with the help of pressure gun to be injected in the slot of stone masonry, ensuring that it remains tightin the joint after curing. Item to include supplying and filling of CrackBond TE 250ml a injectable specialepoxy resin with the help of CrackBond Applicator ensuring that it covers entire cracked area whereverrequired

Providing injecting / grouting with lime slurry in stone / brick masonry walls, lime slury infusion with 10% white cement using pressure pump or by gravity including making holes, refilling and making good damages clearing etc. complete as Per Architect's instructions, payable by actual litres of material injected.

Providing & fixing bamboo wooden flooring of thickness 22-25 mm in sitout area & other area as instructed of approved quality & shade. The flooring material should be having tongue & grooved to have proper interlocking fix. The rate is inclusive of adhesive required to fix the bamboo wooden flooring.(Basic price of bamboo wooden tile Rs. 4900 per sqm)

Providing & fixing bamboo wooden skirting of thickness 22-25 mm in sitout area & other area as instructed of approved quality & shade. The flooring material should be having tongue & grooved to have proper interlocking fix. The rate is inclusive of adhesive required to fix the bamboo wooden flooring. (Basic price of bamboo wooden tile Rs 4900 per sqm)(consider minimum height 100-150 mm)

Plaster of Paris covering of 30mm thickness over the historic floor area with a bottom layerof high density plastic sheet/10 mm commercial ply over existing flooring to ensure that scaffolding/movement of machine do not damage the historic flooring.

Providing lime plaster Min 30mm. thk in two coats having backing coat of 20 mm. thick in 1:3(one lime: 3 surkhi) and finishing coat of 10 mm. thk in 1:2 lime mortar (1 Lime:2 Quartz sand) for EXTERNAL plastering including mixing,approved adhesive such as guggal, jaggery etc. and applying to concrete/brick/ stone masonry surface in all position and finishing the surface even and smooth with lime pluging in1:1 and curing etc. complete

Providing lime plaster of 30mm - 40mm. thk in two coats having backing coat of 20 mm. thick in 1:3(one lime: 3 surkhi) and finishing coat of 10 mm. thk in 1:2 lime mortar (1 Lime:2 Quartz sand) for INTERNAL plastering including mixing,approved adhesive such as guggal, jaggery etc. and applying to concrete/brick/ stone masonry surface in all position and finishing the surface even and smooth with lime pluging in1:1 and curing etc. complete.

Providing and plastering with hand or machine mix Cement mortar of mix ratio 1:4 (1 cement : 4 sand) .( Min Thickness of plaster is 15mm)

Providing and applying machine or hand mix external minimum 25 mm thick double coat cement sand plaster; first coat to be 15 mm thick cement sand mortar of mix ratio 1:4 (1 Cement : 4 Sand)

Providing Second Class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in super structure & Sub structure including striking joints, racking out joints, watering complete.

Providing and constructing 100 mm thick steam cured cellular (aerated) concrete block masonry with stream cured cellular concrete block confirming B.I.S. 6041/ 6042/ 6441/ 3809 having densitynot less than 640 Kg. per Cum. in Cement Mortar 1:4including adequate plastisizer for non bearing portion including raking out joints scaffolding & curing etc. complete.

Providing and applying up to 10mm thick Plaster of Paris punning to walls and ceillings were ever requred in Perfect line and level over the base of single coat cement plaster including roughening of existing surface, with Perforated galvanized steel angle strip as corner protection for external angles and making 6 mm groove at skirting and door, window jamb, sill, lintel, etc. complete.

Providing and applying paint of Royale Plastic finish of Asian or equivalent paint of approved quality, colourand shade in two coats including preparing the surface with sand paper and coating the entire surface withmixture of whiting or glue and linseed oil and one coat of primer and thereafter painting in 2 coats to walls,with Asian paints or approved make and brand of Asian royal paint etc. complete.

Providing & applying exterior grade breathable paint of approved make, shade etc in two coats including one coat of primer & preparing the surface in prior.

Providing and fixing CP Teak wood planking of 20 mm thk for false ceiling at any location as directed, tongue and grooved including scaffolding. Item includes all mouldings and chamfers to be made as per original design indicated by the Architects.

Providing and fixing CP Teak wood planking of 20 mm thk for wooden decorative false ceiling at any location as directed, tongue and grooved including scaffolding. Item includes all mouldings and chamfers to be made as per original design indicated by the Architects.

18 mm thick Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process. Including GI framing for the same .

Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards , screwed/fixed to the under structure of the suspended G.I. Grid constructed and suspended fromthe main ceiling consisting of ceiling sections of size 25 x 50 mm maximum centre to centre distance of600 mm perimeter channel and intermediate channels at maximum centre to centre distance 1200 mmgalvanised grid should be fixed to reinfoced cement concrete slab. The gypsum board should be fixed togalvanised iron grid with necessary screws. The boards should be taped and filled from underside to givesmooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediatechannels. Additional intermediate channels should be fixed to strap hangers for additional support toprevent strapping at every 1200 mm item to be completed in all respect including necessary sleeves forducts finishing of joints cut outs and including labour, materials, lifts etc., all complete.Spec: (As directed by Engineer-in-Charge)

Providing and fixing POP mouldings/ cornice bands, of 6" Vertical Height including grooves in wall, opening side vertical band, architraves, lintels etc. Item to include applying POP upto 1/2"thick to repair existing mouldings, cornice bands, architraves, lintels, pediment, ceiling, etc whenever indicated by the Architect or Engineer in charge. Item to include checking all surfaces for proper line andlevel, scaffolding etc. complete. Mode of Measurement: Height/Width of the moulding to be determined asper the vertical/Width of the same irrelevant of the horizantal depth & inclined dimensions.

Providing and applying french polishing to new wood work including knotting, preparing the surface, etc. complete as directed by EIC.

Providing/fixing the wrought iron/cast iron ornament railing including restoring the original missing intricate design by completely removing the railing and refixing in the foundation. Item to also be executed in the eventuality of making a new railing complete with fixing etc.,Item to include stainless steel fixing dowels upto 10 " deep and 15 mm in dia to be inserted in the limestone for fixing and/or SS pins upto 10 mm dia threaded at the end for anchoring etc.,. The fixing of the new stone and railing to stone would also include cutting out the stone etc., and filling the gaps with mortar grout. ( weight was not less than 40 Kg/m2) ( As per approved design)

Providing/fixing the wrought iron/cast iron decorative electrical pole at site ,and including fixing with boalts and filling the gaps with mortar grout. ( Height-3m)

Careful painting of cast iron brackets, railings and balusters after cleaning, preparing base, application of 2 coats of corrosion inhibiting primer such as zinc phosphate and) 3 coats of epoxy paint of of recommended brand of shade to match original colour or as directed by Architect.

Providing and applying one priming coat to over steel and other metal surfaces including preparing of the surfaces by thoroughly cleaning oil, grease, dirt and other foreign matter withwire brushing, fine fire steel wool, and sand paper, scaffolding etc. complete.

Providing and applying one priming coat to new/old wood surface on the underside of the floor including joists including preparing of the surface by thoroughly cleaning oil, grease, dirt and other foreign matter with wire brushing, fine fire steel wood, and sand paper etc. complete.

Providing and applying three coats of Epoxy( Zno2) paint of approved colour to new structural steel work and wood work in buildings and workshops including scaffolding if necessary,cleaning and preparing surface by solvent, degreasing and derusting by manual scraping/ mechanically bysand blasting/shot blasting, flame cleaning/ by chemical methods complete. (excluding primer coat).

Minor Repairs of the existing wooden door/ window shutters,raftres etc with filling existing voids of wood and treating of survace undulation using saw dust and polymer resins after removal of existing paints ,nails etc by scraping .

Providing and applying Melamine polish of required finish to woodwork internally by spray machine including knotting and preparing surface by scraping, applying French polishings , complete.

Providing and laying cement concrete flooring 100 mm thick with (1:1.5:3)cement concretelaid to proper line level and slope in alternate bays including compaction, filling joints, marking lines to givethe appearance of tiles of 30 x 30 cm ot other size, as specified and laid diagonally or square, finishingsmooth (with extra cement) in any colour as directed, and curing complete.

Providing & Laying of Bharat Tiles of Heritage revival type 150x 150, 200 x 200 mm ,300x300mm,400x400mmsize, 14-16mmthick of plain colour laid in a combination of one or more colours as per the design indicated by theArchitect and matching to the original flooring pattern for the corridor and verandah spaces , laid in cement mortar 1.5 to 3.5cm cement : sand bed mortar of 43 grade cement of rationot leaner than 1:4 with a neat cement slurry on top, of approved thickness. Joints should be as fine aspossible and filled with matching cement mortar as directed by architects.( Basic rate of tiles=Rs. 2650 / Sqm)

Providing & Laying 20-25 mm thk Bharat Tiles or equivalent cement tile for border asper design of the existing/original pattern. The border design to be broken up into 3-4 components indifferent colours upto a maximum of 4 colours and pattern inserts to match the original design to completethe border as per the design indicated by the architect and matching to the original flooring pattern used inthe building or as per drawing in cement mortar 1.5 to 3.5cm cement : sand bed mortar of 43 grade cement of ratio not leaner than 1:4 with a neat cement slurry on top, of approved thickness. Joints shouldbe as fine as possible and filled with matching cement mortar as directed by architects. ( basic rate per Rmt=950/-)

Providing Bharat tile or equivalent make cement tiles skirting 100mm ht. using Plaintiles (plain colour include all the range (dark., light or premium)as available with themanufacturer). Item complete with cement mortar 1:4 and finishing with 6 mm groove at the junctionbetween skirting and wall etc. Rate to be inclusive of tile, storage, all duties and taxes applicable.

Providing & fixing the black Granite & white pre polished marble flooring of thickness min 15 mm in diamond shape pattern in CM 1:4. Size of marble pieces to be 24"*24". The works to be executed as per the instructions given by the EIC. ( Basic rate of white marble=650/ SFT & Basic rate of granite=Rs. 450 SFT)

Providing & fixing the black Granite & white pre polished marble flooring of thickness min 15 mm in diamond shape pattern in CM 1:4. Size of marble pieces to be 7"x7". . The works to be executed as per the instructions given by the EIC. ( Basic rate of white marble=650/ SFT & Basic rate of granite=Rs.450/ SFT)

Providing and fixing Ceramic tiles of size size 300mm x 300mm. of approved quality, make and sample for Flooring / DADO/ cladding in pattern as per detailed drawing & at required position including cutting to required shape, using Average 6 mm thick bed of cement paste(backing) on a plaster finish surface in proper line & level as per technical specification or Using Tile adhesive of approved Make etc. Tile to be fixed to wall in line and level as per drawing, including filling the joints with approved expoxy grouts pigmented to match the shade of the tile, curing, cleaning etc all complete as per technical specifications, drawings & as directed by the PWD. ( Basic rate=375/ SQM)

Providing and laying flooring with Vitrified tiles of any size of approved make, quality, colour, shade and approved sample as per detailed drawings, pattern including Average 20 mm thick 1:4 cement mortar bedding / Tile addhesive and surface preparation, neat cement float, giving necessary slopes, cutting the tiles to match with size, shape, cleaning joints etc. and grouting with epoxy based grout material etc. The finished flooring to be covered with protective sheet of approved make as per the manufacturers specifications till handing over, cleaning the same at handover etc all complete as per technical specifications, drawings & as directed by EIC. ( Basic rate of vitrified tiles=Rs.60/ SFT)

Providing and fixing pre-polished Black Granite(Telephone Black , JAt Black or equivalent) use for dedo of wall, pre-polished granite slabs of approved shade, fixed on a bed of cement mortar 1:4, of Average 25mm thk, flushed with the finished surface of wall, including preparing the surface, cement float, machine cutting, leveling, jointing, pointing joints with neat cement slurry with pigmented additives to match the shade of the stone, 6mm groove in the wall at the junction of stone and finished surface of wall etc., all exposed edges of the ledge shall be chamfered/mouldeded as per drawing and machine mirror polished etc all complete as per technical specifications, drawings & as directed by the EIC.( Basic rate of Telephone Black=500/ SFT)

Providing mirror polishing on marble& granites floors and dado, preparing the surface,etc.,complete.

(D)ROOFING WORKS Mangalore Tiles : Providing & fixing on roof pressed clay tile (Mangalore tile with class "AA" tiles) of 20 mm nominal thickness and of approved size and as per approved pattern on wooden batten frame work complete including ridge batten etc. all complete.( Basic rate of Manglore tiles=Rs.24/ Nos)

Ridge Tiles: Providing & fixing Mangalore tile ridge & hip tiles of class 'AA' painting with coloured cement mortar & curing etc complete. ( Basic rate of Manglore tiles ridge =Rs.46/ Nos)

Al Sleet : Providing and fixing color coated Zincatume (R ) AT150 ( min150 gms/sq ml. total on each side ) profiled sheets for roofing. The feed material is manufactured out o1 nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Profile strength steel with min.550 MPa yield strength, metallic hot dip coated with AluminiurnZinc ailoy (55% aluminum 43.4% zinc 1.6% silicon) Cth COLORBOND I R ) steel quality super durable polyester paint coat ( with inorganic pigment). the paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 vm reverse coal on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square Eluting in the five pan at nominal I 80- 250 mm center to center The end rib shall be designed for ant capillary groove. & return leg. The feed material should haye coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min 25 um ZincTin alloy coaied, Hex head, self drilling screw etc. complete. (weight of profile 4.52 kg/sqm). MAKE: TATA, NSW Thickness : not less than .5( Basic rate of Al Sheet=740/ Sqm)

Providing and fixing C P. Teat wood battens of size 50mm X 25min for Mangalore tile roof work including providing 1 coat of Black Japan on all sides, fixing with SS screws (304) or brass screws as directed by the MC/Architect etc. complete.

Wacker on Manglore Tiles : Application of high quality wacker SMK 1311 Solvent free silicone water repellent coating impregnating on the Monglore tiles by spray. The dilution with water should be done in a ratio of 1:14 ie I part od solution and 14 parts of wacker 1311 solution. The dilution should be applied in 2 or 3coats, wet on wet surface. The dilution should be applied either with brush or by spmy. The application should be done afler siuface is prepared for it. The contractor is to adhere to manufacturer’s specification.( Basic rate of Wacker SMK1311=Rs.475/Lit)

Providing and fixing T.W boarding 25 mm thick well seasoned CP teakwood without knots or cracks, in design matching to existing plank. ( Basic rate of wooden planks=Rs.3100/ CFT)

Providing & laying the dungry cloth over the entire surface of wooden boarding having the hot bitumen coating below to stick the dungry cloth & then spread the cloth. Post spreading the cloth the hot bitumen to be applied using a long brush with a long stick. Application to be done uniformly over the entire surface.

Providing & fixing design eves boards 250-300 mm wide and 25 mm thick well seasoned CP teak wood without knots or cracks ,in design matching to existing eves boards as directed by architect ,etc .complete.

Providing & fixing plain eves boards 250-300 mm wide and 25 mm thick well seasoned CP teak wood without knots or cracks ,in design matching to existing eves boards as directed by architect ,etc .complete.

Providing & laying lead flashing of beat quality of minimum 400 or more width as required and 1.5 mm thick in rolled section or in strips which ever is available in market for valley gutters and in both roof and parapate including proper fixing ,cutting sheet with machinery in required width ,length and shape etc .complete ,the item to include providing for overlap joints incase of the total width of valley gutter is more than the width of the available lead sheet.( Basic rate of Lead =280/KG)

E-TOILET UPGRADATION WORKS Providing and laying cement based waterproofing treatment to terrace with bricks bats laid in required slope to drain the water for any span after cleaning the base surface applying a coat of cement slurry admixed with approved waterproofing compound and laying the brick bats on bottom layer in C:M 1:5 admixed with approved waterproofing compound filling upto half depth of the brick bats, curing this layer for 3 days applying cement slurry over this layer jointing of brick bats with C:M 1:3 admixed with approved waterproof compound and finally top finishing with average 20 mm thick layers of cement mortar added with jute fibre at 1 kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound (FosRoc / BASF / Dr. Fixit).

Providing and laying white marble slab of 18 mm thickness of of approved quality for flooring in required pattern on a bed of 1:4 cement mortar including neat cement float, filling joints with neat coloured cement slurry, curing, polishing and cleaning complete. (Basic Price of marble - Rs 650 / SFT)

Providing and fixing white marble slab of 18 mm thickness of approved quality for dado and skirting in required pattern on plaster of 1:4 cement mortar including neat cement float, filling joints with neat coloured cement slurry, curing, polishing and cleaningcomplete. ( Basic Price of marble - Rs 650 / SFT)

Providing marble moulding of 18 mm thickness and 25 - 50 mm height of approved quality in required pattern and position on plaster of 1:4cement mortar including neat cement float, filling joints with neat coloured cement slurry, curing, polishing and cleaning complete.

Providing and vitrified mirror finish decorative type tiles of size600 mm x 600 mm and 10 mm thick of approved make, shade and pattern and having water absorptionbetween 0.08% to 2.5% for flooring, in required position fixed on plaster of cement mortar 1:4, cementpaste, filling joints with neat cement slurry, curing and cleaning etc. complete.( Basic rate of Tiles=Rs.80 / SFT)

Providing and laying vitrified mirror finish decorative type tiles of size 300x 300,600 mm x 600 mm and 10 mm thick of approved make, shade and pattern and having water absorptionbetween 0.08% to 2.5% for dado in required position fixed on plaster of cement mortar 1:4, cement paste,filling joints with neat cement slurry, curing and cleaning etc. complete. ( Basic rate of Tiles=80 / SFT)

Providing and fixing machine cut mirror polished Granite Slab of required size andabout 20 mm thick of approved quality for Jamb For windows, door frame of toilets on cement mortar 1:4including neat cement float, filling joints, rounding and moulding the edges, curing minor polishing rubbingand cleaning etc. complete. ( Basic Price of granite=Rs.300/ SFT)

Providing and fixing in position European style water closet of " Jaquar/Hindware/ Duravits " Escalerange or equivalent make coupled closet syphonic trap with syphonic etc Including P-Trapes/S-Trapes inlet pipe, stop tap etc. all fittings, cutting andmaking good walls and floors complete.. ( Wall Mount Premium)( Basic price 0f water closet=Rs.16000/ Nos)

Providing and fixing in position European style water closet of " Jaquar/Hindware/ Duravits " Escalerange or equivalent make coupled closet syphonic trap with syphonic etc Including P-Trapes/S-Trapes inlet pipe, stop tap etc. all fittings, cutting andmaking good walls and floors complete.. ( Wall Mount )( Basic price 0f water closet=11105/ Nos)

Providing and fixing in position European style water closet of " Jaquar/Hindware/ Duravits " Escalerange or equivalent make. Including P-Trapes/S-Trapes/ inlet pipe, stop tap etc. all fittings, cutting andmaking good walls and floors complete.. ( Floor Mount )( Basic Price of water closet=Rs.7500/ Nos)

Providing and fixing concealed flush tank of jaquar/ Dura /Hindware make with GI lineconnection and main conceal stop cock with with 32 mm dia C.P. brass waste coupling, C.P. brass flushbend, over flow pipe, fixed on brackets with screws, 15mm dia concealed C.P brass angle stop cock,10mm dia C.P. brass/PVC connector pipe etc., Item to also include 100 mm dia CI connector pipe fromthe P or the S trap to the junction of the soil stack or drain and all GI connection complete.( Basic Price of concealed Flush tank=Rs.5800/ Nos)

Providing and fixing Dual type flush tank of jaquar/ Dura make with GI lineconnection and main conceal stop cock with with 32 mm dia C.P. brass waste coupling, C.P. brass flushbend, over flow pipe, fixed on brackets with screws, 15mm dia concealed C.P brass angle stop cock,10mm dia C.P. brass/PVC connector pipe etc., Item to also include 100 mm dia CI connector pipe fromthe P or the S trap to the junction of the soil stack or drain and all GI connection complete.(Model No-K-8857 IN -2-B01) ( Basic Price of Dual Flush tank=1550/ Nos)

Providing and fixing Orrisa type(HINDWARE) white glazed earthenware 625 mm x 450 mm water closet pan including trap, cast iron soil and vent pipes upto the outside face of the wall including 100 mm.diameter cast iron plug bend, cement concrete bedding, 10 litres capacity H.D.P.E. flushing cistern withfittings, inlet pipe with stop tap, brackets , 32 mm. diameter galvanised iron heavy type flush pipe withfittings and clamps, painting to exposed pipes and cutting and making good the walls and floors etc.complete. (Excluding water proofing with brick bat coba)( Basic price of Orrisa type white glazed earthen ware=2000/ Nos)

Providing and fixing White glazed earthenware half stall type urinalwith white H.D.P.E.flushing cistern of 5 litres capacity with fittings, inlet pipe and stop tap, brackets for fixing the cistern, 32mm diameter galvanised iron heavy type flush pipe with fittings and flushing arrangement etc. ( Basic price of White glazed earthenware half stall type urinalwith white H.D.P.E.flushing cistern=Rs.8600/ SET)

Providing and fixing in position wash basin. With necessary brackets and west coupling and bottle traps (make jaquar or equvalent ) ( Basic price of materials=Rs.4500/-)

Providing and fixing 10 cm dia pvc Nahani Trap.

Providing and fixing Mirrors of approved Indian quality, copper plated with 3/8" thick plywood backing, in the masonry etc. complete.(600 mmx 300mm) ( basic Price of hanging mirror=Rs.2000/ Nos)

Providing and fixing Chromium Plated Towel Rail 457 mm long of Kohler or equivalentmake of approved quality fixed on chromium plated bracket including providing teak wood gutties inmasonry etc. complete. ( Basic Price of towel ring 457mm=Rs.950 /Nos)

Providing and fixing Chromium Plated Towel Rail 2'-6" long, 3/4" dia. and of approvedquality fixed on chromium plated bracket including providing teak wood gutties in masonry etc. complete. ( Basic Price of towel ring 2'6"==Rs.1100 /Nos)

Providing and fixing stealth faucet jet spray of approved Jaguar or equivalent make including necessary socket / union etc. complete as directed.( Basic Pric eof jet spray=Rs.1600/ Nos)

Providing and fixing 12 mm Chromium Plated 4" long pillar type cock of jaquar orequivalent make as approved by Architect or Engineer in Charge, with deluxe knob for Wash Hand Basinor sink etc. complete .( Basic Price of CP 4" long body pillar cock=Rs.1600/ Nos)

Providing and fixing long body water spout of jaquar or equivalent of decorative stealth series ivory gold orchromium plated with flange for wash basin of approved Jaguar or equivalent make including necessarywasher,taplon tape etc., complete. ( Basic Price of Long Body water spouch=Rs.450/ Nos)

Providing and fixing Wall mounted sensor Soap Dispenser of jaquar or Equivalent approvedmake and design. Item to include making holes and necessary hardware like screws etc. and makinggood the damages etc. complete ( Basic Price of soap dispenser=Rs.985/ Nos)

Providing and fixing Chromium Plated Towel ring of jaquar or Equivalent approved makeand design. Item to include making holes and necessary hardware like screws etc. and making good thedamages etc complete ( Basic price of CP Towel ring=Rs.850/ Nos)

Providing and fixing Chromium Plated Toilet Paper Holder of jaquar or Equivalentapproved make and design. Item to include making holes and necessary hardware like screws etc. andmaking good the damages etc. complete .( Basic Price of CP toilet paper holder=1200/Nos)

Providing and fixing Chromium Plated wall mounted robe hooks of jaquar or equivalentapproved make and design to hang clothes. Item to include making holes and necessary hardware likescrews etc. and making good the damages etc, complete. ( Basic price of wall mounted robe hook=Rs.600/ Nos)

Providing & Fixing multi function steam bath for bath room of size 1800* 1100*2290 mm of approved brand & model . The rate is inclusive of all fittings required to fix and the labour charges..

Providing & Fixing steam generator for steam bath of approud brand. The rate is inclusive of all fittings required to fix and the labour charges.

Providing & fixing bath tub jacuzzi of approved make & model. The rate is inclusive of all fittings required to fix and labor charges.

Providing & Fixing bath tub of approud brand. The rate is inclusive of all fittings required to fix and the labour charges.

Providing & fixing ceilling shower ARTIZE 430*330 mm OSA/7000/JSH ranjoi -2 Function rain and mist . The rate is inclusive of all fittings required to fix and labor charges.(Basic price of ceilling shower=Rs.57150 / Nos)

Providing & fixing ceilling divertor of approved make & model. The rate is inclusive of all fittings required to fix and labor charges.(4- way)( Basic Price of 4-way divertor=Rs.31050/Nos)

Providing & fixing shower for bath of approved make & model. The rate is inclusive of all fittings required to fix and labor charges..( Basic price of jet shower=Rs.1432/ Nos)

Providing & fixing body jet shower for bath of approved make & model. The rate is inclusive of all fittings required to fix and labor charges.(Model No K-8003IN-CP)( Basic Price of body jet shower=Rs.6700/ Nos)

Pressmatic Urinal Flush Valve: Providing and fixing C.P. brass pressmatic urinal flush valve with 15 or 20 mm outlet connection for urinal of approved make and conforming to Manufacturers Standards. Make: Jaquar or Equivalent . ( Basic Price of urinal flush valve=Rs.1500/ Nos)

Providing and fixing brass CP Angular stop cock with wall flange of approved make as per drawing and direction and satisfaction of Engineer in Charge and conforming to Manufacturer's standards. Make: Jaquar or Equivalent ( Basic price of CP Angular stop Cock with wall flange=Rs.850/ Nos)

Providing and fixing brass CP two way bib cock with wall flange of approved make as per drawing and direction and satisfaction of Engineer in Charge and conforming to the manufacturer's standards. Make: Jaquar or Equivalent ( Basic price of CP two way bib cock with wall Flange=Rs.1600/ Nos)

Providing and fixing Unplasticized Polyvinyl Chloride (UPVC) pipes (Sch - 80), having thermal stability for hot & cold water supply including all UPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of engineer in charge. (Astral/Supreme/Eq.) (32mm )

40 mm dia

50 mm dia

Providing and fixing Clorinated Polyvinyl Chloride (CPVC) pipes , having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of engineer in charge. (Astral/Supreme/Eq.) (15mm)

20 mm dia

25 mm dia

32 mm dia

50 mm dia

Supply, installation, testing & commissioning of gunmetal, male or female threaded isolation control valve (Ball Valve), confirming to latest IS , PN 1.0, with necessary specials, union, nipples etc., to complete the job. ( Zoloto/ Audco/ R.B.) 25mm dia.

32mm dia.

40mm dia.

50mm dia.

Supply, installation, testing & commissioning of gunmetal, male or female threaded isolation control valve (Wheel Valve), confirming to IS 778, PN 1.0, with necessary specials, union, nipples etc., to complete the job. ( Zoloto/ Audco/ R.B.) 32mm dia.

40mm dia.

50mm dia.

Providing and fixing float valve with pressure type (Copper) float of approved make.( Zoloto/ Audco/ R.B./ Spirex) 40mm dia.

Providing and fixing 100 mm dia Cast Iron Soil Pipes with necessary fittings such asbends, tees, single junctions, double junctions, slotted vent, offsets on walls or in the ground includingfilling joints with cement mortar of 1:2 and two coats of anticorrosive paint including fixing the pipe on wallsby means of nails driven through lugs in wooden holders/battens including necessary scaffolding completeincluding removing the existing pipe if necessary and conveying and stacking or asdirected.

Providing and fixing 125 mm dia Cast Iron Soil Pipes with necessary fittings such asbends, tees, single junctions, double junctions, slotted vent, offsets on walls or in the ground includingfilling joints with cement mortar of 1:2 and two coats of anticorrosive paint including fixing the pipe on wallsby means of nails driven through lugs in wooden holders/battens including necessary scaffolding completeincluding removing the existing pipe if necessary and conveying and stacking asdirected.

Providing and fixing 150mm dia Cast Iron Waste Water Pipes with necessary fittings suchas bends, tees, single junctions, double junctions, slotted vent, offsets on walls or in the ground includingfilling joints with cement mortar of 1:2 and two coats of anticorrosive paint including fixing the pipe on wallsby means of nails driven through lugs in wooden holders/ battens including necessary scaffoldingcomplete including removing the existing pipe if necessary and conveying and stacking as directed.

Providing and fixing Steel Sink of size 60 x 45 x 25 to the kitchen platform includingUPVC waste coupling pipe and coupling, making good the damaged surface etc. complete ( Basic rate of steel sink =23000/Nos)

Providing and fixing 15 cm x 10 cm Salt Glazed Stoneware Gully Trap in cement concrete 1:4:8 outside the building including connecting to salt glazed stoneware pipe, brick masonrychamber with cast iron lid grating for the gully trap etc. complete as directed

F-RESTORATION OF DOORS AND WINDOWS & OTHER WOODEN WORKS. Providing and fixing or replacing damaged teak wood with well seasoned C.P teak wood for door or window frames or members of decorative frame of the same original design, size and pattern including all mouldings, rebating, holdfasts and any other necessary fittings and finishing with one coat ofprimer complete.

Providing wood work in trusses ,purlins ,rafters,post,post plates ,columns, wall plates , and the like wrought framed ,hoisted and fixed in position of approved design , colour etc. complete as directed. For carved works ,the actual size of the materials will be consider.

Providing wood work in columns capitals & base,,ceillings. And also fixed in position all decorative carved wood .For carved works ,the actual size of the materials will be consider.

Providing and fixing well seasoned C.P.Teak wood with openable louvered shutters as per the original design and pattern as instructed by the Architect including screws, nails, etc.complete. Item to also include making all the mouldings and design of the panels as shown in drawing.

Providing and fixing well seasoned C.P.Teak wood for fixed louvered shutters as per the original design and pattern as instructed by the Architect including screws, nails, etc.complete. Item to also include making all the mouldings and design of the panels as shown in drawing.

Providing and fixing C.T.W. single leaf second class fully panelled door/window without ventilator adopting sections and sizes as given in the Standard Specifications Volume-II (1981) or as per detailed drawings including chromium plated fixtures and finishing the wood work with one coat of primer complete. (With-out frame)

Providing & fixing of Architrave moulding appruved by architect incharge .at door & windows frames side at wall & door/window frames attached, including nails ,ss scrues.

Providing and fixing hydraulic door closer of approved quality and make to door shutter including making proper adjustment for smooth operation etc. complete. ( Open Type)

Providing and fixing glazing of clear glass of Asahi, Modi, Saint Gobain or equivalent make with a 6mm thickness and bevelled edges. Rate to be inclusive of beading patti to match the original design. Item to include careful removal of damaged/ cracked/ missing glass panels on doors / windows and discarding the same. Item to include damaged door window shutters, ventilators arch etc. of the same decorative arched design, with beading patti, thickness and pattern, including sealant putty etc. complete.

Providing and fixing heavy duty decorative type brass hardware as per existing design,size and pattern per the weight of the original hardware including all necessary fixtures like brass screws etc. complete. Item to include preparing samples for approval from the Architect before making the entire lot. (Including antique finishing) 4" Hinges

6" Hinges

4" Parlamantery Hinges

6" Towerbolts

12" Towerbolts

18" Towerbolts

10" Aldrops

12" Aldrops

15" Aldrops

6" pawankadi

12" Pawankadi

6" Handle

12" Handle

15" Handle

Providing and fixing heavy duty decorative type brass patti as per design . Item to include preparing samples for approval from the Architect before making the entire lot.

Providing and fixing well seasoned Indian teak wood skirting 20 mm thick in required position and of the size shown in the drawings including all mouldings as per drawings, rough grounds, Rawl plugs if necessary and finishing with french polish etc. complete. Item to include spray coating all the surfaces with approved anti termite solution .

Providing & Fixing salvage Wood from site /specific items from roof/super structure shall be measured as labour charges only.,cleaning ,scraping ,anti termite ,etc shall be done before reused to match to the required size and design as per EIC.

Providing and fixing double leaf decorative type mild steel gate having single shutter ofsize about 2.14m x 2.13m weighing approximately 68kg/sqmt with outer frame made up of 50mm x 50mmsolid Square bars and 16mm dia mild steel vertical bars at 10cm centre to centre supported with bracingbox made up of 40mm x 5mm M.S. flat with decorative design made up of 25mm x 5mm mild steel flatincluding decorative brass flowers, decorative brass buttons, leaves and mild steel accessories decorativebhalla at the top of each vertical bar with heavy duty M.S. specialised hinges and M.S. wheels 75mmdiameter with the tracks fixed in ground at required positions for smooth opening arrangement includingcutting, fabricating, moulding, hoisting, erecting, fixing in position with connecting plates, braces andwelding, riveting, bolting as per detailed design and drawing etc. complete.

Providing & applying of polymer plaster at damaged ceillings ,Using Rusticide to clean rain forcement bars. .After 24 hrs apply bipolar polyyalk cp 293+ on bars.Apply slurry of POLYALK EP mixed with cement for bonding coat after 3-4 hours.Apply premixed polymer mortar "POLYCRETE" 50 mm thickness in two layers.

Providing and fixing pre-polished Black Granite ballusters ( 200 mm Dia) and (750mm to 900 mm Height) , fixed on Main staircase Trades both corner , including preparing the surface. All exposed edges shall be mouldeded and mirror polished as per drawing and as per technical specifications, drawings.(Basic rate of Black Granite ballusters=Rs.2800/ Nos

Providing and fixing Stone made Top Rails ( 150 mm wide) , fixed on Main staircase areas Trades both corners Ballusters. All exposed edges shall be mouldeded and mirror polished as per drawing and as per technical specifications, drawings.( Basic rate of granite stone top railling=Rs.1900/ RFT)

Provding and fixing hydraulic mosquito net as per colour, pattern and make approved by Architect. ( Basic rate of hydraulic mosquito net=Rs.3100/ SQM)

Providing and fixing fine dressed Rajula stone flooring of avg stone thickness 100 mm over 40 mm thick bed of cement mortar in ratio 1:4 . Edge of the stone should be machine dressed to achieve a proper straight edge.( Basic rate of rajula stone=Rs.110/ SFT).

Providing and fixing coloured glass of thicness 6 mm in kitchen windows as per design approved by Architect.( Basic rate of colured glass=Rs.350/ SFT)

Providing and fixing Engineering marble(Composite Marble)over white marble at kitchen platform, Counters etc. (White marble base will be paid separately)( Basic rate of engineering marble=Rs.380/ SFT)

Providing and fixing Engineering marble slab of 20 mm thickness of approved quality for dado in required pattern on plaster of 1:4 cement mortar including neat cement float, filling joints with neat coloured cement slurry, curing, polishing and cleaningcomplete. ( Basic rate of engineering marble=Rs.380/ SFT)

Providing and fixing White marble of 50 mm to 75mm height of approved quality for skirting in required pattern on plaster of 1:4 cement mortar including neat cement float, filling joints with neat coloured cement slurry, curing, polishing and cleaning complete. ( Basic rate of white marble=Rs.650/ SFT)

Providing and fixing Royal curtains at windows, as per colour , make and design approved by Architect. ( Basic rate of royal curtains=Rs.220/ SFT)

Providing and fixing Blinds at windows, as per colour , make and design approved by Architect. ( Basic rate of blinds=Rs.240/SFT)

Providing and laying Composit masonry of random pattern using around 40 % of exposed brick masonry and 60 % of exposed Ashlar stone masonry in lime mortar. ( Basic rate 0f dressed stone=Rs.480/ Nos)

Providing and Fixing Syntex make over head PVC water tank of capacity 5000 Liter, including installation of tank with necessary plumbing connections.

Providing and fixing heavy type hanging mirror, mounted in ceiling with SS studs ( Basic rate 0f hanging mirror=Rs.6000/ Nos)

Providing and fixing designer CI main entrance gate with Brass logo. ( Brass will be paid separately)

Designing and installing Brass logo over CI main gate as per size approved by EIC. (Basic rate of ready made brass logo=Rs.6000/ Nos)

Providing and fixing of Rajula stone kerb with Top and bottom thickness of 150 mm and 300 mm height, Laid over 100 mm thick PCC bed over 200 mm thck rubble soling. ( Basic rate of rajula stone per RMT=Rs.1295/-

Providing and Fixing Trellies near boundry wall of garden area .

Providing and fixing 150mm wide 450mm over all semi-circular plain G.I sheet class-3 gutter with iron brackets 40mm X 3mm size bolts, nuts, washers etc., around mangalore tile, including making necessary connections.( Basic rate of GI sheet 18 guage=Rs.620/ SQM)

Providing and fixing CI Chain to GI sheet gutter to prevent splashing due to direct fall of rain water from eve Gutter. ( Basic rate of CI chain=Rs.300/ RMT)

Supplying SS trolley ( serving trolley)for kitchen area.

Providing and installing mechanical ventilation system using 0.8 mm GI sheet ducting. ( Exaust fan will be paid saperately)(Basic rate 0f GI Ducting 0.3x 0.15m=Rs.620 SQM)

supply installation, testing and commissionaning of domestic exaust fan suitable for mechanical ventilaation system.( Basic rate of domestic Exaust Fan=Rs.3700/Nos)

Supply installation, testing and commissionaning of 6 Lit LPG Gas Geyser in Bathrooms.( Basic rate of LPG gas Geyser=Rs.12000/ Nos)

SITC of water softening plant using ion Exchange technology to convert hard water to soft water.(Resin holds sodium from common salt in the brine tank. When hard water runs over it, the resin captures the Calcium and Magnesium and releases harmless Sodium to maintain the chemical balance of water.)( Basic rate of softning plant with fixutures=Rs.55000/ Nos)

applying high quality weather proof PU polish by sparay painting over a coat of french polish after surface prepartion of wood surface by sand papers as directed by Engineer-In-Charge / Architect

Applying two or more coat of Ethyl Silicate chemical as approved by as approved by ASI / EIC of approved brand and manufacturer with brush or spray on the existing or new masonry surface tillthe no further absorption of chemical.

Providing and applying Dr.Fixit Repelling WR silicone based water-repellent coating confirming to BS: 6477-1984 in 2 coats with consumption of 1.5 sq.mtr/litre over the exposed surface including cleaning the surface making it free from dirt, oil grease wax and all other contamination using mechanical tool , airbrush , compressed air followed by water washing and as per the manufacturer specification and direction of Engineer-in-charge.

Providing and applying decorative lime plaster ( Cornice band size 150mm wide and 50 mm average thick) over 25 mm thick average base coat of lime mortar and 3- 5 mm thick final coat in lime putty.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Providing and fixing woden balusters at Kitchen and other areas. ( Height=900 mm& Thickness of ballusters=75mm)

Providing Arise Plaster on lime plaster at outer wall using slack lime, Dolomite powder, Mica etc, Given smooth finish.

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of xcavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.

Providing and fixing single lever basin mixer ( ARTIZE XQU-43009B ) ( Basic rate of basin mixer=Rs.16470/ Nos)

Providing and fixing table top wash basin including waste coupling and bottle trap. ( Make jaq.jds25907N) (Basic rate=5337+360+1413=7110/-)

Providing and Fixing half inch chromium finish wall mixer ( Jaguar or equivalent make) (Basic rate=Rs.4500/ Nos)

Providing and fixing cement sheet on ceilling . ( basic rate of cement sheet=Rs.55/ SFT)

Providing and fixing Polyvinyl Chloride (PVC) pipes for waste water and drainage . This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of engineer in charge. (Astral/Supreme/Eq.) (15mm)

20 mm dia

25 mm dia

32 mm dia

50 mm dia

100 mm dia

150 mm dia

200 mm dia

Testing of Structures Wood Testing: Carrying out the below mentioned test on the wood samples to the work,include trasportation ,lifting,siffting all complete to satisfaction of EIC. -Compressive test along the grains.

Compressive test across the grains.

Tensile test along the grains.

Tensile test across the grains.

Point Wiring SICT Of Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected Open/ concealed in/ on surface on wall/ceiling complete with 6A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic box, single mounting base frame covered with textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ ceiling rose / H.D.Connector as directed. (a) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete.

SICT OfSecondery point

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected Open/ concealed in / flushed on wall/ceiling complete with 6A Modular type switch and hum free EME four or more step type electronic fan regulator with separately mounted and accessories with earth continuity of following type erected on PVC / Metallic box, single mounting base frame covered with textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete. Make: RR, Polycab, KEI

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of to be erected concealed in / on surface of wall / ceiling complete with Modular type switch & 5 pin Plug erected on PVC / Metallic box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. [F] For 6A Plug with 2-1.5 sq.mm Cu. Wire Cat. III

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of to be erected concealed in / on surface of wall / ceiling complete with Modular type switch & 5 pin Plug erected on PVC / Metallic box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. [II] For 16A Plug with 2-2.5 sq.mm Cu. Wire Cat. III

Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic box, single mounting base frame covered with textured / metallic front plate modules erected on / in wall / ceiling with following type accessories Cat. III

Point wiring for Two Way Controlled Light/Fan Point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires erected in below type of pipe with 6A Modular type switches and following type of accessories erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate modules erected on / in wall / ceiling as per pipe erected. with necessary batten/angle holder or ceiling rose or H.D.Connector as directed. (a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling complete- Cat III

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size (a) with medium class Rigid PVC pipe and accessories. Make: RR, Polycab, KEI (a) 2 wire 1.5 sq. mm

(b) 2 wire 2.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size (a) with medium class Rigid PVC pipe and accessories. Make: RR, Polycab, KEI (a) 2 wire 4 sq. mm

(b) 4 wire 4 sq. mm

(c) 4 wire 6 sq. mm

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed Make: Precision, nihir, Polycab (a) 20 mm

Providing following type of Modular Type Accessories mounted with pvc / metallic box, single mounting base frame covered with textured / metallic front plate , modules erected with necessary connection. As desired by Engineer In charge Cat.III Make: Anchor, Legrand, Greatwhite,GM (a) Two Pin/RJ-11 Telephone Socket For One Gang

(b)One No. SP 6 Amp.

(c) Blank Plate Single

(d) Computer RJ-45 socket

(e) 6A/10A/16A/20A/25A/32A Single pole Modular MCB Switch

(f) 16/20/25 Amp. Modular Starter for Motor / A.C. Unit Complete

(g) TV Co-axial Socket outlet

Supplying & erecting approved make LAN cable of following size in existing pipe as per direction (a) CAT - 6 e. Make: D-Link, Commscope, DIGISOL

Providing & Erecting approved make following size of TV Co-axial flexible cable comprising inner conductor of solid bare copper insulated with Foam PE & Secondary conductor made of poly - Aluminium film bonded Al. Braids @ suitable coverage overall sheathed with black PVC insulation. Make: STD or ISI aproved Make (a)RG-6

SETC of MX Make 6 Way Tap off RG6/RG11 Single Splitter

LT Switchgear, Distribution Boards & LT Panel Servicing, overhauling, cleaning of the panel board HT by EPNF-065™ technology , after scanning the single side of panel by thermal scanning technology. Thermal scanning technology includes measuring temperature before and after servicing by each & every space of the panel board. One side of panel must be cleaned by Air Compressor Capacity 2.5 to 3.5 HP Motor, 1 or 3 phase, 230v, Air tank having capacity approx 50 kg with latest moisture filter, spray gun having EPNF-065™ liquid. The work having time constraints of 2 to 5 minutes single side of the panel. After finishing work agency has to provide 3 photographs or to provide 2 minutes video. Dust or any waste material must be collected by agency in the bottom of panel board by non woven fabrics material or any scientific materiel. Agency has to carry out work in presence of site in charge engineer & to complete the work as per site in charge engineer. ( Consider Measurement MIN. Sq.Mtr. ) Scope Of Work :- a) liquid Cleaning, b) blowing by compressor & Cleaning, c) Thermal Scanning, b) Photograph & Videos e) Supervision by authorized Engineer.

Design, Supplying, installing, testing of factory fabricated ready made Three phase APFC Panel Cubical Panel fabrication should be type tested as per IEC 61921, 61439:1&2 Capacitor Duty Contactor for switching as per following Steps Incomer Switch of MCCB type Icu=Ics=50KA at 400/440 Volts, with Microprocessor based OC, SC, internal earth fault protection Incomer Switch of MCCB type Icu=Ics=50KA at 400/440 Volts, with Microprocessor based OC, SC, internal earth fault protection,Copper tinned insulated Busbar,Cubical panel should be indoor type with IP 43 and IK 10,Metalized polypropylene film tye3-phase 550Volt Capacitor,De tuning Reactor for each capacitor,Panel having Short Circuit and Overload protection,Each step Capacitor having suitable MCCB with Sc, OL, internal earth fault relay,Each stage having Stage Contactor (Capacitor load rating),PF regulator master controller having suitable steps with LCD display, Rs 485 Communication port, Indication LED Lamps for main incomer and ON-OFF for each capacitor bank,MS Chanel for Floor mounting, Cable entry as per site situation,Cooling fans for panel. Make: CPRI Approved Panel (a)50KVAR (10KVAR X 4 Nos and 5KVAR X 2 Nos Steps)

Miniature circuit breaker single pole 6A to 32A suitable to operate on 240 V A.C. system C Curve and having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark Cat. III. Make: L&T, Legrand, C&S

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity (a) 6 to 32 Amp. Cat III. Make: L&T, Legrand, C&S

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity. Make: L&T, Legrand, C&S (a) 6 to 32 Amp

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity. Make: L&T, Legrand, C&S (b)63 Amp.Cat. III

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 8623 1& 3 and IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs. (The DBs should be used of same company of MCB to be used) (a) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI) (b) sheet steel double door Make: L&T, Legrand, C&S (i)4 way

(iii)8 way

(iv)12 way

Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and suitable for operation on single phase 240 V. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component. for following Max. rating erected as directed. Make: L&T, Legrand, C&S (a) 25 Amps.DP - Cat III

(b) 40Amps. DP - Cat III

(c) 63 Amps. DP - Cat III

Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and suitable for operation on single phase 240 V. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component. for following Max. rating erected as directed. Make: L&T, Legrand, C&S (a) 25 Amps.FP - Cat III

(b) 40Amps. FP - Cat III

(c) 63 Amps. FP - Cat III

providng and erecting Approved make single phase electronic energy meter rating 5A/20A/40A based on ASIC (Application Specific integral circuit) digital technology with accuracy Class-I, temper proof, free from effect of external magnetic field with phase, earth, reverse and impulse indications, 6 digit electro-mechanical counter suitable to work on 120 V to 300V, 45 - 55 Hz., housed in robust enclosure complete to be erected as directed with 3 year replacement guarantee. Cat-III Make: STD or Aproved by Electricity Board.

providng and erecting Approved make energy meter 3 phase 4 wire unbalanced load rating, 10A to 60 Amp. based on ASIC(Application specific Integral Circuits) digital technology with accuracy Class - 1 , temper proof, free from effect of external magnetic field with 3 phase indication, earth & impulse indication, 6 digit electro mechanical impulse counter, suitable work on 120 V to 300V per phase 45-55 HZ, housed in robust enclosure with erection as directed. Cat-III. Make: STD or Aproved by Electricity Board.

Supplying & erecting MINI SECTION PILLAR 75 x 60 x 45 cms fabricated from 16 Gauge thick joint legs M.S. Sheet with angle iron legs 45 cms long made from 35 x 35 x 5 mm thick. Jointless M.S. Angle with cable clamps to be buried in ground to have appropriate erection to work Uniform Until erected with cement concrete foundation and 45 cms high bricks work finishing with plaster etc. hinged double door with 3" x 4" vision panel covered with Mesh & V. panel overlapping with flap for meter reading internally supported on both side, with internal and outside looking arrangement with look and keys in duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is welded and other with nut and bolt for erecting bakelite sheet. Painting the Section Pillar inside and out side with three tank powder coated paint.. Section pillar roof should be without joint with water leakage proof & tested as per IP 55 test & followed by IS 2147 of 1962. Make:CPRI Approved Only.

Supplying and erecting bakelite sheet 12mm thick HYLAM make on existing angle iron frame.

Cables,Wires & Termination Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables Make: RR, Polycab, KEI (a) 4 core 4 Sq. mm

(b) 4 core 6 Sq. mm

(c) 4 core 10 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables Make: RR, Polycab, KEI (a) 4 core 16 Sq. mm

(b) 4 core 25 Sq. mm

(c) 4 core 35 Sq. mm

(d) 4 core 70 Sq. mm

(e) 4 core 95 Sq. mm

(f) 4 core 120 Sq. mm

Making trench in soft soil of suitable width of 90 cms deep for laying cable or locating the fault all over the run and backfilling the same and making the surface as normal ground.

Providing & laying. R.C.C. hume pipe for cable to be laid 90 cms. below ground across the road crossing or on floor with necessary material in an approved manner and making the ground as per original. (a) 450 mm dia

(b) 300 mm dia

Providing & laying. Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same material at required depth for laying of cable. below ground / road surface for enclosing cable and back filling the same to make ground as per original. Make: sy-aron, Gemini, Telerex (a) 50 mm Inner dia

(b) 90 mm Inner dia

(c) 120 mm Inner dia.

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (a) 2 to 4 core 2.5 / 4 Sq. mm

(b) 2 to 4 core 6 Sq. mm

(c) 2 to 4 core 10 Sq. mm

(d) 2 to 4 core 16 Sq. mm

(e) 2 to 4 core 25 Sq. mm

(f) 2 to 4 core 35 Sq. mm

(g) 2 to 4 core 70 Sq. mm

(h) 2 to 4 core 95 Sq. mm

(i) 2 to 4 core 120 Sq. mm

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Make: HEX, Jainson, 3D (a) 1.5/ 2.5/4/6 Sq.mm

(b) 10 Sq.mm

(c) 16/25 Sq.mm.

(d) 35/50 Sq.mm.

(e) 70 Sq.mm.

(f) 95 Sq.mm.

(g) 120 Sq.mm.

Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. Make: HEX, Jainson, 3D (a) 1.5/2.5 to 6 Sq.mm

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible copper cable approved make of following Size. Make: RR, Polycab, KEI (a) 3 Core x 2.5 Sq. mm.

(b) 3 Core x 4.0 Sq. mm

SETC of PVC/ XLPE insulated ISI marked unarmoured copper cable 1.1 kV grade of following sizes & as per detailed specifications, terms & conditions. Make: RR, Polycab, KEI (a) 3 x 1.5 sq mm

Providing and fixing approved make Perforated C type cable tray. Made from pre- galvanized sheet steel. The cable tray should be bended as per IS 2062/1079 . with max 17.5% perforation with coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erected on existing support as per Specification and as per instruction of engineer in charge.. (Including Making 90° Elbow Bands, Cross Junction, ' T' Junction onsite as per site specific requirement) Make: Local Make and Hot deep type (a) 200 X 50 X 1.5 mm Thick

(b) 300 X 50 X 1.5 mm Thick

(c) 450 X 50 X 1.5 mm Thick

(b) 22-24 Watts, Surge - 2KV,IP-20, 4 feet

(c) 36 Watts, Surge-2 KV, IP-20, 4 feet

LED Lamps integral type,cool white with PC diffuser suitable for B22 LAMP holder (a) 5 to 8 watts Make: Phillips, Lafit, Bajaj, osram or Aproved by Government Incharge.

Step Light having Aluminium die cast and ABS Plastic material. (a) 5 watts, Direct/Indirect luminaire - Cat III Make: Phillips, Lafit, Bajaj, osram or Aproved by Government Incharge.

SETC of 300 Lumen LASER PKW/BK SQ COB SPOT DIM:55MM*55MM,CUT OUT:50MM*50MM Make: Phillips, Lafit, Bajaj, osram or Aproved by Government Incharge.

SETC of 1200 Lumen LASER PKW/BK RTN COB SPOT DIM:205MM*55MM,CUT OUT:200MM*50MM Make: Phillips, Lafit, Bajaj, osram or Aproved by Government Incharge.

SETC of 1200 Lumen TATE PKW/BK RD COB SPOT DIM:85MM*76MM,CUT OUT:76MM Make: Phillips, Lafit, Bajaj, osram or Aproved by Government Incharge.

SETC of 5W LHL-10055 BLACK AMBER GLASS H/L DIM:300MM*H-480MM*L-1000MM Make: Phillips, Lafit, Bajaj, osram or Aproved by Government Incharge.

SETC of LHL-1007/1A AMBER GLASS H/L DIM:240MM*H-430MM*L-1000MM E.27 FILAMENT LED LAMP Make: Phillips, Lafit, Bajaj, osram or Aproved by Government Incharge.

SETC of LWL-1149/240/3K GLASS WALL DIM:200MM*W-240MM*H-300MM Make: Phillips, Lafit, Bajaj, osram or Aproved by Government Incharge.

SETC of C-1315 BRASS HANGING LIGHT DIM:D-160MM*H-1850MM Make: Phillips, Lafit, Bajaj, osram or Aproved by Government Incharge.

SETC of W-5247/1 BRASS WALL LIGHT DIM:D-200MM*W-210MM*H-425MM E.27 4W LED LAMP Make: Phillips, Lafit, Bajaj, osram or Aproved by Government Incharge.

GO 8021/1 EMBER GLASS WALL DIM:D-265MM*W-190MM*H*300MM E.27 4W LED LAMP Make: Phillips, Lafit, Bajaj, osram or Aproved by Government Incharge.

SETC of LED 5X GLASS LED MIRROR LIGHT DIM:L-560MM*H-70MM Make: Phillips, Lafit, Bajaj, osram or Aproved by Government Incharge.

SETC of GEP-400AB BRASS PICTURE LIGHT DIM:L-600MM*H*130MM*D*150MM Make: Phillips, Lafit, Bajaj, osram or Aproved by Government Incharge.

SETC of 8W PLI-151/12 600MM BLACK FIX TO CEILING E.27 FILAMENT LED LAMP LEDLUM Make: Phillips, Lafit, Bajaj, osram or Aproved by Government Incharge.

SETC of KL-8220/12W CLEAR GLASS CHANDELIER DIM:D-950MM*H-1700MM E.14 FILAMENT LED LAMP Make: Phillips, Lafit, Bajaj, osram or Aproved by Government Incharge.

SETC of 3W zoom Spot Surface mounted accent lighting luminaire in pressure diecast housing, with zoom Make: Phillips, Lafit, Bajaj, osram or Aproved by Government Incharge.

SETC of 7W COB, Elegant fixed spot with a focused 36 degree beam angle. Make: Phillips, Lafit, Bajaj, osram or Aproved by Government Incharge.

SETC of 12W COB, Elegant fixed spot with a focused 36 degree beam angle. Make: Phillips, Lafit, Bajaj, osram or Aproved by Government Incharge.

SETC of 18W COB, Elegant fixed spot with a focused 36 degree beam angle. Make: Phillips, Lafit, Bajaj, osram or Aproved by Government Incharge.

SETC of 22W COB, Elegant fixed spot with a focused 36 degree beam angle. Make: Phillips, Lafit, Bajaj, osram or Aproved by Government Incharge.

SETC of 600 Lumen High performance LED Downlights for commercial applications, 100 lumen / watt efficacy, Efficient heat sink (die cast) with Steel clips, Integrated driver control (for easy installation) Make: Phillips, Lafit, Bajaj, osram or Aproved by Government Incharge.

SETC of 1600 Lumen High performance LED Downlights for commercial applications, 100 lumen / watt efficacy, Efficient heat sink (die cast) with Steel clips, Integrated driver control (for easy installation) Make: Phillips, Lafit, Bajaj, osram or Aproved by Government Incharge.

SETC of 2000 Lumen High performance LED Downlights for commercial applications, 100 lumen / watt efficacy, Efficient heat sink (die cast) with Steel clips, Integrated driver control (for easy installation) Make: Phillips, Lafit, Bajaj, osram or Aproved by Government Incharge.

SETC of Simple Edison Lamp Hanging. Make: Phillips, Lafit, Bajaj, osram or Aproved by Government Incharge.

SETC OF 10W surface/ suspended cylindrical downlighting, extruded aluminium housing and a superior powder coated. Make: Phillips, Lafit, Bajaj, osram or Aproved by Government Incharge.

SETC OF 15W surface/ suspended cylindrical downlighting, extruded aluminium housing and a superior powder coated. Make: Phillips, Lafit, Bajaj, osram or Aproved by Government Incharge.

Otdoor Lighting Items Tree Uplighter - 5 - 7W SETC of LED Tree Uplighter/ Ground Burial, Embedded flood light (IP67), 1100-1400 Lumens. Make: Phillips, Lafit, Bajaj, osram or Aproved by Government Incharge.

Bollards SETC of LED Bollard Antique/ Heritage look with Base plate. with lumens pakages- 300 to 600, Height 700 to 1000mm, Ingress protection IP-65/66. Make: Phillips, Lafit, Bajaj, osram or Aproved by Government Incharge.

SETC of antique look heritage style post top lantern. Make: Phillips, Lafit, Bajaj, osram or Aproved by Government Incharge.

SETC of heritage style 3.5 mtr height pole. Make: Dia- Casting.

Fans & Related Item SETC of 1400mm Sweep Decorative Ceiling Fan. Make: Bajaj, Orient, Hevells or Approved by Government Incharge.

SETC of Decorative Wall Fan. Make: Bajaj, Orient, Hevells or Approved by Government Incharge.

Providing and erecting Approved make Power Saving / High Speed Max. 50 Watt Ceiling fan with double ball bearing ISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete having 3 blades with aluminium blades with canopy and 30 cms. down rod erected on existing hook or clamp with 24/0.2 , 3 core flexible wire with earthing. Make: Bajaj, Orient, Hevells or Approved by Government Incharge.

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly painted for fan complete with proper insulation without leakage and earthing.

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC bars up to 50mm length each side and pierced through a 16 Gauge M.S. box / Heavy Duty PVC box complete erected concealed in Ceiling with necessary finishing.

Supplying & erecting single phase approved make industrial exhaust fan suitable for medium duty ring mounted low noise operation suitable for medium duty having following dia size and maximum speed in RPM (a)305 mm dia 900 RPM Cat III Make: Havells, Orient, Orient or Equivalent.

Providing suitable M.S. louver shutter of the Exhaust fan. Make: Havells, Orient, Orient or Equivalent.

Supplying and erecting approved make pedestal fan A.C. 230V. 50 Cy/s. 400 mm sweep oscillating, type and adjustable, height complete with guard regulator, & standard lead flexible wires and plug top. Cat III Make: Havells, Orient, Orient or Equivalent.

Supply of Decorative Pedestal Fan With Basic Rate of Rs. 7500/-

Earthing System Providing and erecting required size HOT deep Galvanized iron strip for earthing of H.T. , OCB/ ACB/ Transformer LT pannel board, Motors etc. using proper clamp.

Providing and erecting required size Copper strip for earthing of H.T. OCB / ACB/ Transformer, LT panel board, Motors etc. using copper clamp.

Providing and erecting Annealed bare Copper wire 8 to 16 SWG.

Providing and erecting required 8 SWG size HOT deep Galvanized iron GI WIRE.

Supplying & erecting in earthpit of minimum bore dia. 225mm size approved make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising, connection terminal dia of 14 mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications with chamber and heavy duty cover.(approved make OEM has to submit test certificate including value of earth resistane of installation. (a) For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive Computer System(like Automation, SCADA)i.e. independent Earthing located in other than normal soil i.e. Soft Rock, Marshy Soil etc.. -Length of Pipe : 3 Mtrs. -Back filling Compound :2 nos Bags of 25 Kg. Make: Onyx, Ashlok, E-link or Approved by Government Incharge.

Providing one bag of 25 Kg. Additional Back Filling Compound (BFC) suitable for safe earthing device.

Supplying & erecting funnel type earthing having earth plate of following size burred in specifically prepared earth pit 3 mtr. below ground with 40 kg. charcoal and salt with alternate layers of charcoal & salt, 20mm.dia. G.I. pipe with Funnel with a wire mesh for watering & bricks masonry block, C.I. Cover complete as per para 7.3 of IS 3043 with necessary length of double Galvanised Iron / copper earth wire No 6 SWG bolted with lug to the plate and covered in 12 mm dia. G.I. pipe 2.5 mtr long complete connected to the nearest switch gear with end socket as per direction & duly tested by earth tester confirming to IS (As per drawing) with following specification (a) with 60 x 60x 0.315 cms. Copper earth Plate

SITC of Galvanized Steel Flat 25x6 mm thickness from earth electrode directly in ground as required. Zinc coating: 500 g/m square (Approx:70 micron coating) tested and used exclusively for lightning protection earthing system and ring equipotential bonding.

SITC of 14.2 mm dia 3 mtr long Earth electrode of High tensile steel electrode with 250 micron copper bonding & 1 bag of Carbon fill Based environment friendly backfill tested as per IEC 62561-7 in NABL accredited Laboratory and suitable stainless Steel double sided clamp. Eco Friendly rust proof heavy duty weather proof Polyethylene Earth Pit Chamber with following dimensions :254 mm dia (top), 330 mm dia (bottom) & 260 mm (height).

Water Coolers & Purifire Providing and erecting water cooler having storage capacity 80Ltr. & cooling capacity 40 Ltr.per hour @ an ambient temp of 450 C. The outlet temp. of the water should drop by 150 C within a hour, The water cooler should be comprising of hermetically sealed compressor, fan motor, condensing unit, water tank surrounded by evaporating coil, thermostats, relay etc. complete with necessary inlet & outlet connection. The body of water cooler will be made from Stainless Steel. (FSS) Make: Blue Star, AO Smith,voltas or Equivalent.

SITC of Water Purifire Make:Eureka Forbes, Kent, Pureit

SOLAR Water Heater Supplying, installing, testing & commissioning of SOLAR WATER heating system comprising of Solar flat locket collector, stainless steel hot water storage isolated tank with S.S. heat exchanger, absorber made of copper sheet & copper tube of following capacity in liter / day (LPD) with "B" size aluminium box collector with appropriate capacity electrical backup arrangement (Excluding inlet & outlet pipe lines) Make : Racold, Redren,Emmvee Solar System. Including Making Loop/Ring connection for all the Geysers.. (a) Capacity of 1000 LPD Make: STD or Approved by Government Incharge

CCTV of Buildings & External 2MP Dome / BULLET Camera 1/2.8" Progressive CMOS, ICR, 1920x1080:25fps(P)/30fps(N), H.265/H.264, 3D DNR, BLC, HLC, 2 VCA, IR range: up to 20m, DC12V & PoE Make: Hikvison, Honeywell, Infinova

16 ch NVR, 100Mbps Bit Rate Input Max (up to 16-ch IP video), 2 SATA interfaces, 380 1U case , 2 SATA; 160 Mbps incoming bandwidth; Make: Hikvison, Honeywell, Infinova

6TB HDD for 30 days recording Make: Western Digital, Seagate or Equivalent

WiFi Access Point , 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE) , 2.4 GHz, gain 2 dBi , Limited Lifetime Hardware Warranty Make: Cisco, HP, Aruba

24 port POE Switch , 24 10/100/1000 ports , 24 x Gigabit Ethernet, 4 Gigabit SFP, Power Consumption (with PoE) Make: Cisco, HP, Junipar

1G SFP Module Make: Cisco, HP, Junipar

5 x GE RJ45 ports (Including 1 x WAN port, 4 x Switch ports) Make: Cisco, Fortinet, Shopos

FortiGate-30E 3 Year Unified Threat Protection (UTP) (IPS, Advanced Malware Protection, Application Control, Web Filtering, Antispam Service, and 24x7 FortiCare) Make: Cisco, Fortinet, Shopos

24 port Patch Panel Make: D-Link, Commscope or Equivalent

1m cat-6 Patch Cord Make: D-Link, Commscope or Equivalent

6 Core Fiber Cable SM Make: D-Link, Commscope or Equivalent

12 Port Loaded LIU Make: D-Link, Commscope or Equivalent

Pigtails SM Make: D-Link, Commscope or Equivalent

3m Fiber Patch Cord SM Make: D-Link, Commscope or Equivalent

Work Station PC , Core i5-10500 6C 3.1Ghz / 8Gb ( 1 X 8 ) 2666MHz / 1TB SATA 7200RPM / UMA / DVDRW / Win 10 Pro 64 / VGA Port v2 / 260W / 3/3/3, HP 8GB DDR4-3200 UDIMM, NVIDIA Quadro P400 2GB Graphics Kit, w/2 mDP-to-DP Adapters Included, P22vb G4 FHD Make: HP, DELL, IBM

10m HDMI Cable

RJ-45 Connector Make: D-Link, Commscope or Equivalent

15U Wall Mount Rack with Accessories Make: Valrack, D- Link or Equivalent

42 U rack with Accessories 800x1000 Make: Valrack, D- Link or Equivalent

Fiber Splicing Charges

OTDR Testig

Fire Alarm System 2 Loop Micro processor based 2 wire fault tolerant loop, required loop networkable type (each loop accessing 99 detectors and 99 modules ) fire alarm/detection control panel.It shall be possible to connect a number of panels together to create a networked system up to a max 16 Loops.An optional RS485 network card shall be installed within each panel forming the network. The panel shall be able to give location of all fire/fault conditions of addressable units via the address codes. Further, the panel must be able to automatically switch ON /OFF respective control module when ever any alarm is triggered. The LCD should be high resolution, backlit 2 (lines) x 40 character.Six control keys shall be fitted for Evacuate, Show Alarm Zones, Extend Delay, System Reset Silence/Re-sound Alarms and Mute Buzzer. In addition two programmable function keys shall be provided. The Panel Shall be Sheet Steel Painted, selaed to IP30. The panel shall have a minimum of 20 fire zones and a maximum of 80 fire zones.The panel shall have a built in power supply and battery charger along with maintenance free 24 AH, 2 x 12 volt SMF Lead acid batteries capable of running for a minimum of 24 hours with battery charger complete as required. and conforming to BS5839 Standards and Duly Approved by EN54/LPCB as per specifications. Make: Honeywell, Siemens, Bosch

12V 7 Amp Battery Make: Exide, Amaron or Equivalent

Intelligent Analog Addressable Type Multicriteria Detector Complete with Dual LED, Hard Addressable Having rotary decade Address switches from 01-99, complete with Mounting Base Complete as required Conforming to BS 5839 Standards and Duly Approved by EN54/LPCB Make:Honeywell, Siemens, Bosch

Addressable Rate of Rise Heat Detector rated at 8.3 deg C/min. The detector shall have twin bi-colour LED for 360 deg viewing. Addressing shall be with user friendly rotary decimal switches. Make:Honeywell, Siemens, Bosch

Intelligent Analog Addressable Type Manual Call Point having Surface or flush mounting Option fully complaint to EN54 having Rotary Decade Switches for Addressing from 01-99 complete with Back Box for Mounting Complete as required conforming to BS5839 Standards and Duly Approved by EN54/LPCB Make:Honeywell, Siemens, Bosch

ddressable Type Loop Powered Hooter Cum Strobe complete with Mounting Base with 32 different tones support & as required conforming to BS5839 Standards and Duly Approved by EN54/LPCB Make:Honeywell, Siemens, Bosch

Addressable type fault Isolator for isolating shorted, de-linked and loose circuits between two successive fault isolators with automatic resetting arrangement to be interconnecting to loop cable complete as required conforming to BS5839 Standards and Duly Approved by EN54/LPCB Make:Honeywell, Siemens, Bosch

junction box for detector moaunt

System Instatllion, Testing & Commissioning Charges

Fire Alarm CU. Arm Cable- 2C X 1.5 sqmm. Make: RR, Polycab, KEI

EPABX ETERNITY PENX6SAC IP-PBX with Universal Connectivity and Mobile Extensions • Universal Slots: 6 • Max. IP Users: 100 • Max. TDM Ports: 48 • Built-in Ports: 5 IP Users*, 4 VoIP & 4 VOCODER Channels & Ethernet Make: Matrix, Cisco, Panacoinc

ETERNITY PE CARD CO2+SLT6 Make: Matrix, Cisco, Siemens

ETERNITY PE CARD CO2+SLT6 Make: Matrix, Cisco, Siemens

20 Pair Junction Box Make: Matrix, Cisco, Siemens

Telephone Make: Beetel, Citaaz, Motorola

Digital Phone Make: Matrix, Cisco, Siemens

IO Make: D-Link or Equivalent

Singel Face Plate Make: D-Link or Equivalent

Back box

System Instatllion, Testing & Commissioning Charges

Smart TVs SETC of 85 Inch BRAVIA XR, MASTER Series, Full Array LED, 8K, High Dynamic Range (HDR), Smart TV (Google TV), WI-FI, ETHERNET INPUTS, BLUETOOTH, CHROMECAST BUILT-IN,

4K Ultra HD Blu-ray™ Player | UBP-X700 with High-Resolution Audio Make: Sony, JBL or Approved Government by Incharge

SETC of 55 Inch, OLED, 4K Ultra HD, High Dynamic Range (HDR), Smart TV (Google TV), WI-FI, ETHERNET INPUTS, BLUETOOTH, With 3.1 ch Dolby Atmos®/DTS:X™ Soundbar Make: Sony, Sumsung, LG

SETC of 77 Inch, OLED, 4K Ultra HD, High Dynamic Range (HDR), Smart TV (Google TV), WI-FI, ETHERNET INPUTS, BLUETOOTH, With 3.1 ch Dolby Atmos®/DTS:X™ Soundbar Make: Sony, Sumsung, LG

SETC of 43 Inch, 4K Ultra HD, High Dynamic Range (HDR), Smart TV Make: Sony, Samsung, LG

Audio Visual System SETC of 4000L DLP projector with Laser Pointer & Supper Eco Lamp Life till 15000 hr. Make: ViewSonic or Approved by Government Incharge Model No.: PG706WU

SITC of full HD SXRD Home Cinema Projector 1800L brightness and white finish. Make: Sony VPL HW65ES or Equivalent

SETC of Ceiling mount kit For Projector Make: STD or Approved by Government Incharge

SITC of Projector Lift Make: STD or Approved by Government Incharge

SETC of 9'X6' instalock projector Screen Make: STD or Approved by Government Incharge

SITC of 120" Diagonal Tab Tension Moterized Screen 105"X59" Make: STD or Approved by Government Incharge

SETC of IR Microphone Make: STD or Approved by Government Incharge

SETC of gooseneck Microphone with Phantom Power Supply Make: Shrure or Approved by Government Incharge Model No.: CVG18

SETC of 6" 2-way Speaker Make: CKS or Approved by Government Incharge Model No.: CKW 601

SITC of Rockustic Outdoor Garden Omniplanter 6.5 Speaker Make: STD or Approved by Government Incharge

SITC of ultra flate aluminium line array element speaker. Make: K-ARRAY Vyper KV52 or Approved by Government Incharge

SITC of Stainless steel line array subwoofers. Make: K-ARRAY Rumble- KU210 or Approved by Government Incharge

SITC of all- in -one stainless steel amplifiers and processing solutions. Make: Kommander KA14 or Approved by Government Incharge

SETC of 160 W Amplifier Make: CKS or Approved by Government Incharge Model No.: CKA-1600U

SETC of Co-Axial cable Make: STD or Approved by Government Incharge

SETC of Speaker Cable Make: STD or Approved by Government Incharge

SETC of Microphone Cable Make: STD or Approved by Government Incharge

SETC of Connectors & Accessories & Converters Make: STD or Approved by Government Incharge

SETC of 5 Meter Length HDMI Cable Make: STD or Approved by Government Incharge

SETC of 15 Meter Length HDMI Cable Make: STD or Approved by Government Incharge

UPS SETC of True Online UPS System 15 KW Rating Single Phase Output @ 0.8 PF With Sealed Maintenance Free Batteries. Suitable for 30 Mins. Backup. Battery rack & interlink for battery connections. - Input voltage : 433 V, 3phase +/- 2% - Output voltage : 430 V, 1phase +/- 2% - Battery charger Auto / Manual float cum Boost .The rate shall include overvoltage cutoff , undervoltage trip. - Transfer time: Zero Second - The THD must be < 2% on linear load, < 5% on non linear load - Output neutral must be independent from mains neutral. - Noise level should be < 50db from 1 meter distance - Load capacity should be 100% @ 0.8 PF and overload capacity should be 125% for 10 min., 150% for 30 sec - Inverter efficiency should be > 90%. - Overall efficiency of UPS should be > 80% Make:Emerson, Socomec, Schneider Electric

SETC of True Online UPS System 7.5 KW Rating Single Phase Output @ 0.8 PF With Sealed Maintenance Free Batteries. Suitable for 30 Mins. Backup. Battery rack & interlink for battery connections. - Input voltage : 433 V, 3phase +/- 2% - Output voltage : 430 V, 1phase +/- 2% - Battery charger Auto / Manual float cum Boost .The rate shall include overvoltage cutoff , undervoltage trip. - Transfer time: Zero Second - The THD must be < 2% on linear load, < 5% on non linear load - Output neutral must be independent from mains neutral. - Noise level should be < 50db from 1 meter distance - Load capacity should be 100% @ 0.8 PF and overload capacity should be 125% for 10 min., 150% for 30 sec - Inverter efficiency should be > 90%. - Overall efficiency of UPS should be > 80% Make:Emerson, Socomec, Schneider Electric

Grid Connected SPV Rooftop Plant (Roofs & Parking Shed) Design & SETC of Grid Connected SPV Rooftop Plant with Five years comprehensive warranty, Maintenance and Operation of Grid Connected SPV Rooftop Plant under Net Metering without battery. Cabling up to PCC Panel (Ground Floor) from the SPV Rooftop system will be in the scope of the successful bidder(s). The cable length of 100m for solar power plant installed shall be in the scope of the bidder and supply of excess cable length if required shall be in the scope of purchaser. Including Performance testing of the complete system. The contractor will collect firm work order from the purchasers. The Invoice, technical details of module, PCU, etc. and its test report, testing and commissioning report of plant, Statement of Expenditure, Joint Inspection Report, Net Metering Work Completion & Synchronization reports, installed system photographs, and bill of material has to be submitted to consumer/purchaser, and uploading it government website for release of CFA of MNRE/State subsidy will be in contractor's scope. The SOP containing the details of Operation & Maintenance shall be provided to purchaser at successful handing over The contractor shall do necessary coordination with concerned agencies like Electrical Inspector/ GEB/ DISCOM for procuring necessary approvals on behalf of the Purchasers. Cost of approvals and bi- directional meter, CT/PT shall be borne by the Contractor only. Any Legal Charges will be borned by Purchaser. Make: Tata Power, Goldi Solar, Waaree

AIR-CONDITIONING WORK SITC OF AIR-COOLED ALL INVERTER VRF AIR-CONDITIONING OUTDOOR SYSTEM- R 410 A SITC of modular type Outdoor condensing VRF unit of the following capacity with R 410 gas based model with hermattically sealed Twin compressor 1 no. is inverter based with micro- computer control expansion valve. Microprocessor control base unit. Make: O-General, Hitachi, Blue Star (a)16 HP FRONT DISCHARGE

(b)12 HP FRONT DISCHARGE

(c)10 HP FRONT DISCHARGE

(d)8 HP FRONT DISCHARGE

SITC OF AIR-COOLED ALL INVERTER VRF AIR-CONDITIONING INDOOR SYSTEM- R 410 A SITC of VRF Indoor Units with High Fan speed, microprocessor control base with panel of the following capacity. Make: O-General, Hitachi, Blue Star (a) 2.5 TR. Wll Type Nominal Cooling Capacity

(b) 2.0 TR. Wall Type Nominal Cooling Capacity

(c) 1.8 TR. Wall Type Nominal Cooling Capacity

(d) 1.5 TR. Wall Type Nominal Cooling Capacity

(e) 4.0 TR. 4-Way Cassette Type Nominal Cooling Capacity

(f) 3.0 TR. 4-Way Cassette Type Nominal Cooling Capacity

(g) 2.5 TR. 4 Way Cassette Type Nominal Cooling Capacity

(h) 3.5 TR. 4 Way Cassette Type Nominal Cooling Capacity

Floor mounted tower type AC IDU Supplying & installing Floor mounted tower type AC having 3 ton capacity unit consisting of Scroll/ rotary compressor operating on 3 phase 415V / 50Hz duly filled with refrigerant (Green Gas) with remote control operation. Make: O-General, Hitachi, Blue Star

Supplying & installing Floor mounted tower type AC having 4 ton capacity unit consisting of Scroll/ rotary compressor operating on 3 phase 415V / 50Hz duly filled with refrigerant (Green Gas) having cooling capacity upto 48000btu/hr compatible with remote control operation. Make: O-General, Hitachi, Blue Star

False ceiling insulation with 25 mm thick Nitril rubber class O fire retardant. This Nitril rubber shall be firmy sticked over the external surface of all false ceiling grids with no air bubble left under this surface

ANTI CORROSIVE COATING OF EVEPORATIVE & CONDENSER COILS

Supply & laying of Copper flexible Control electrical cable duly laid over GI cable treys / neatly clamped & terminated with pressure glands with all nessasary hardwares etc. (a)1.5 sq mm copper shielded cable

Copper Refrigerant piping suitable for VRF refrigerant grade mirror polished surface finish on inside, duly insulated with Nitril rubber sleeves of 19 MM thickness duly laid over cable treys / clamped neatly. All such refrigerant piping running outside building shall be covered with UV glasscloth & surface coating. All refrigerant piping shall have steel ball valve at indoor connections. (1 Pair (Liq. Line + Gas Line) Make: Mexflow, uniflow

Copper refnet joints

Outdoor Joint- Large

Refrigerant R410 A

UPVC drain piping duly insulated with Nitrile sleeves having thickness of 13 mm, supported with GI rods & U clamps with slope in ratio of 4:1 with U air trap before leaving it over drain point provided. Make: Prince,Astral, (a) 40 mm Dia

(b) 25 mm Dia

Cordless Remote Control Unit

Exposed piping insulation to be covered with 1 layer of Silver aluminium foil tap 30 micron

SMART BMS MANAGER WITH DATA ANALYSER Displays all indoor unit in one screen Shows basic indoor unit settings on main screen Advance operation and master schedule functions- with calender Four concurrent users Energy monitoring and billing functions

Hydro-Dipping of Indoor Unit

(C) With General PLUS ADDITIONAL SPECIAL FEATURES attached herewith. Prem. Cat.

Supplying & erecting approved make Lift Announcing solid state system in the Passenger/ Stretcher lifts having AC2/ACVV/ACVF drives & automatic doors only. The system comprising following features & facilities. (i) Announcing floor message, message to close period (ii) Announcing ‘Emergency Message’ when lift is stuck between floors due to power failure or any other reason. (iii) Instrumental Music between floor announcing. (iv) Announcement in English / Hindi & Gujarati Languages.. (v) Flexible to accommodate special per-programmed message such as name of the building /office. (vi)Volume adjustment control

Providing & erecting approved make overload non-start feature & overload warning Indicator system in the lift with making use of sound isolated floating platform & micro switches on SI frame to get sensation of live load inside lift cage at any given moment, with provides new fixtures of overload warning inside lift cage with new relay in the existing control panel to activate ‘Overload Non-Start Function with carrying out additional wiring including laying of new travelling cable, include minor civil work & without changing the existing capacity speed stops, travel & operation of the desired lift

LIGHTENING ARRESTER SITC of Vertical Air Termination Solid aluminium with Base- 10 mm dia and 1000 mm long. Air Termination Base tested for conditioning, Ageing Test & Lightning impulse current withstand test: 100 kA of 10/350µs waveform in an accredited Third party laboratory as per 6.3 & 6.4 of IEC 62561-1 2017 protocol with MAST 34mm dia 3000 mm long- Cold Galvanized Make: OBO or Equivalent or Approved by Government Incharge

SITC of 8 mm dia solid Aluminium Conductor for roof top mesh grid and tested as per IEC 62561- 2 conducted in the Govt. accredited thirty party laboratory to meet the requirement of IS/IEC 62305 with Required Accessories - Aluminium Holding clamp at every 1 mtr distance, Aluminium/SS cross splicer at every crossing of Alu. conductor, Expansion piece with connectors at every 20 mtr distance, Aluminium straight Splicer to connect conductors. All Accessories should be tested as per IEC 62561-1 2018 Cl. 6.3 for conditioning & Ageing Test & 6.4 for Lightning impulse current withstand test: 100 kA of 10/350µs waveform(Ageing & Electrical test ) conducted in a sequence manner & tested in the Govt. accredited Third party laboratory to meet the requirements of IS/IEC 6230 Make: OBO or Equivalent or Approved by Government Incharge

SITC of 10 mm MS Round Solid Conductor having smooth surface Should be tested and use exclusively for lightning protection (Vertical Riser/Down Conductor which shall be concealed in Column) to meet the requirement of IS IEC 62305 With Accessories - Earthing stud of dimension SS-75mm OD plate with 10mm dia tail connector used in structural steel ring earthing system to meet the requirements of IS/IEC 62305. (For Interconnecting the Column and the Terrace AL Conductor / Strip/Flat), SS Cross Connector to connect Earth fixing point to vertical raiser/Down conductor, SS Straight Splicer at every 4 Mtr to connect MS conductor in column, Bonding /Rebar Clamp at every 3 mtr suitable for interconnecting round conductor with reinforcement inside the concrete for structural earthing system, SS connector -To connect external conductor 8- 10 mm with earth fixing point. All Accessories should be tested as per IEC 62561-1 2018 Cl. 6.3 for conditioning & Ageing Test & 6.4 for Lightning impulse current withstand test: 100 kA of 10/350µs waveform(Ageing & Electrical test ) conducted in a sequence manner & tested in the Govt. accredited Third party laboratory to meet the requirements of IS/IEC 6230 Make: OBO or Equivalent or Approved by Government Incharge

SITC of Galvanized Steel Flat 25x6 mm thickness from earth electrode directly in ground as required. Zinc coating: 500 g/m square (Approx:70 micron coating) tested and used exclusively for lightning protection earthing system and ring equipotential bonding.Make: OBO or Equivalent or Approved by Government Incharge

SITC of 14.2 mm dia 3 mtr long Earth electrode of High tensile steel electrode with 250 micron copper bonding & 1 bag of Carbon fill Based environment friendly backfill tested as per IEC 62561-7 in NABL accredited Laboratory and suitable stainless Steel double sided clamp. Eco Friendly rust proof heavy duty weather proof Polyethylene Earth Pit Chamber with following dimensions :254 mm dia (top), 330 mm dia (bottom) & 260 mm (height). Make: OBO or Equivalent or Approved by Government Incharge

Jeernodhar Conservators Pvt Ltd