COMPREHENSIVE MAINTENANCE IN ZONE A AND REPLACEMENT OF MOORUM FILLING SAND BAGS AND ALLIED BR WORK IN TECH AREA AT AF STN SURATGARH

Amount

BOQ (COMPREHENSIVE MAINTENANCE IN ZONE A AND REPLACEMENT OF MOORUM FILLING, SAND BAGS AND ALLIED B/R WORK IN TECH AREA AT AF STN SURATGARH.)

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for glazed ceramic colour tiles in vertical surface 300mm x 450 mm x 7mm thick set over and including 10mm thick cement plaster in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 200mm X 300mm X 7mm thick as in vertical surfaces set over and including 10mm thick cement plaster in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for non-skid ceramic white tiles area of tiles exceeding 0.06sqm but not exceeding 0.11sqm and 7-8mm thick laid in floors, set including 15mm thick cement screed bed in CM 1:6, and jointed in neat cement slurry to match the shade over complete all as specified and directed.

M&L for non-skid ceramic white tiles area of tiles exceeding 0.11sqm but not exceeding 0.18sqm and 7-8mm thick laid in floors, over and including 15mm thick cement screed bed in CM 1:6, set and jointed in neat cement slurry to match the shade over complete all as specified and directed.

M&L for vitrified Ceramic tiles Light shade 10mm thick (square/rectanguler) Polished area of each tile not exceeding 0.36sqm in floor etc set over and including 15mm thick cement screed bed in CM 1:6, and jointed in neat cement slurry and pointed in white or coloured cement to match tiles complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including screed bed or bedding layer of mortar 20mm thick for laying of floor finishes in CM 1:6, including rubbing and polishing including demolition of stone slab and tiles of any description or thickness complete all as specified and directed.

M&L for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thick cement plaster in CM 1:4, set cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including demolition of stone slab and tiles of any description or thickness complete all as specified and directed.

M&L for granite tile 20mm thick machine cut, including screed bed or bedding layer of mortar 20mm thick for laying of floor finishes in CM 1:6, bedded and jointed with grey cement slurry and pointed with white/coloured cement with admixture of pigment to match the shade of granite store including cutting and polishing etc complete all as specified and directed.

All as per ser item No 9 here-in-before but on dado/skirting including 10mm thick cement plaster in CM 1:4, complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in platforms/stair case/ Countertop including screed bed or bedding layer of mortar 20mm thick for laying of floor finishes in CM 1:6, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding off/curving the edges of granite stone & polishing complete all as specified and directed.

Complete treating the old surface of granite and kota stone with grinding rubbing and beeswax polishing complete all as specified and directed.

Taking down chowkhats with shutter (without taking off shutter from the frame) exc 1.5Sqm but not exc 4Sqm each complete all as specified and directed.

Taking down chowkhats with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each complete all as specified and directed.

Taking down shutters of any description but exc 1sqm and not exc 2sqm each and refixing in same opening complete all as specified and directed.

Taking down chowkhats or frames exc 1.5sqm but not exc 4sqm each complete all as specified and directed.

S&F for pressed steel frames for doors with one or more related including necessary fixing lugs, hinges look strike plate etc. complete as specified size of frame105mm x 60mm complete all as specified and directed.

S&F for pressed steel frames for doors with one or more rebated including necessary fixing lugs, hinges strike plate etc. complete as specified size of frame 125mm X 60mm complete all as specified and directed.

M&L for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in hold fast iron fixing and back filing of pressed steel door frame including necessary form work complete all as specified and directed.

S&F for framed work of rolled mild steel conforming to Fe-290 (GdeE165) as in doors or gates of angle or other section with gusset plates, rails, braces, etc, drilled for fixing of steel sheeting or other covering; doors etc to be prepared for hanging or sliding with and including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting, running rails & guides) and hanging, fastening & fixing complete all as specified and directed.

S&F for 35mm thick 2nd class hard wood plain framed Plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F for 35mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkhats, complete all as specified and directed.

S&F for 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F for floor door stopper 150mm overall length of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F for small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like including all necessary labours, articles not exc 200Cu.cm each in 2nd class hard wood complete all as specified and directed.

S&F for mild steel butt hinges of size 100mm, medium weight, cold rolled complete all as specified and directed.

S&F for 300mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F for 200mm long mild steel barrel tower bolt, stove enamelled black with bright bolts complete all as specified and directed.

S&F for 150mm long mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.

M&L for preparation of new wood and wood based surfaces of any description, not otherwise described over 10cm width or girth and two coats of synthetic enamel painting over one coat of pink primer complete all as specified and directed.

S&F for steel window with side hung shutter including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F for steel ventilator with top hung shutter including hinges with steel peg stay, complete without glazing bars, complete all as specified and directed.

M&L for preparation of new steel surfaces and iron surfaces of any description, not otherwise described over 10cm width or girth and two coats of synthetic enamel painting over a coat of red oxide complete all as specified and directed.

Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, Windows ventilators and partitions (fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-chief.

Providing and fixing anodised aluminium (minimum thickness of powder coating 50 micron) work for doors, windows ventilators and partitions (fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Chief.

M&L for 12mm thick both sides prelaminated particle board, medium density, fixed with screws to frame work in cup board shutters, partitions, shelves complete all as specified and directed.

S&F for 4.8mm thick sheet glass, ordinary quality and in square exc 0.5sqm in each pane in any position complete all as specified and directed.

S&F in repair door closer hydraulically regulated, design No 3 universal type suitable for door shutter 851mm to 1000mm in width and of weight 61kg to 80kg each cast iron body complete all as specified and directed.

S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm thick PVC sheet reinforced with mild steel square tube complete all as specified and directed.

S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed.

S&F for 125mm long aluminium anodized ‘D’ type handles complete all as specified and directed.

S&F for 50mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F for 100mm long aluminium polished butt hinges type B12 complete all as specified and directed.

Demolition of brick work or stone/boulders masonry built in cement mortar complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

All as per ser item No 45 here-in-before but except brick complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in floor finished surfaces fair and even to receive tile complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 (using 40mm grade stone aggregate) as in plinth protection / paving finished fair and even without using extra cement complete all as specified and directed.

Demolition of RCC of any description in any position not otherwise specially provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L for providing reinforcement cement concrete 1:2:4 (using 20mm graded stone aggregate) as in slabs/ beams/column in floors balconies,canopies, desc slabs and the shelves and the like, complete all as specified and directed.

M&L for RCC chajjas 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in approved design all as directed by Engr-in-Charge

Use and waste of formwork to soffits of suspended slab such as roof slab, floor slab, landing and similar work n.exc 200mm thick (Horizontal or sloping) flat in fair finished surfaces of concrete complete all as specified and directed.

Use and waste of formwork to cornices and mouldings of any shape in cross section and any girth in fair finished surfaces of concrete complete all as specified and directed.

Use and waste of formwork to edges of concrete flats, treads breaks in floor, window cills, concrete railing, openings in concrete walls, floor and roofs and similar works exc 5cm but not exc 10cm wide rough finish surface of concrete, complete all as specified and directed.

Use and waste of formwork to edge of concrete flats, breaks in floors, opening in concrete walls, floors and roofs and side of RCC/PCC bands in walls ad similar works not exc 20cm thick, complete all as specified and directed.

S&F for mild steel TMT bars 10mm dia and over , cut to length, bent to shape required, including cranking bending and binding with mild steel (annealed) wire not less than 0.90mm dia, complete all as specified and directed.

S&F for mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking bending and binding with mild steel (annealed) wire not less than 0.90mm dia, complete all as specified and directed.

Dismantling existing water tank of capacity 500 ltrs capacity and removing to store, complete all as specified and directed.

S&F for rotational moulded polyethylene water storage tank of capacity 500 ltrs ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.

S&F in repairs 20mm bore dia nipple suitable for HDPE water tank. (minimum weight 20mm-45gms) complete all as specified and directed.

S&F in repair 20mm bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.

S&F in repair Ball valve of 20mm bore high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed, (Minimum weight 210 gms) complete all as specified and directed.

Dismantling structural steel work including doors, gates and plate but excluding framed truss etc complete all as specified and directed.

Dismantling asbestos cement sheets (Corrugated, Semi corrugated etc.) in roof coverings complete all as specified and directed.

S&F for MS steel work in tubular trusses including special shaped washers etc., complete using but ERW or induction butt welded tubes confirming to IS 1161- 1979 graded St 240 with one shop coat of zinc chromate primer paint, complete all as specified and directed.

S&F for rolled mild steel plates (plain or chequered) channels, square cut or notched, forming holes, with riveted, bolted or welded attachment confirming to Fe 410 - W, complete all as specified and directed.

S&F for mild steel framed structure like trussed, purlins, crane gantries, post rails and fastenings and heavy bracket framing (beam, tee, angle, channels, flat sections) including distance pieces, cleats etc conforming to Fe410-W (Gde-E-250) quality-A, complete all as specified and directed.

M&L for 6mm thick asbestos cement sheet, corrugated, or semi corrugated sheets in roofs, walls etc. and fixed with L hook or Cranked bolts, complete all as specified and directed.

M&L for pre painted galvalume aluminium zinc coating having GI based corrugated steel sheets 0.50mm thick of any colour as in tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screw complete all as specified and directed.

S&F for mild steel screws bolt (machine made) with hexagonal or square heads one end screwed , each screwed end have one washer and one nut, dia of shunk 11-15mm and length of bolt exc 5cm and not exc 10cm, complete all as specified and directed.

S&F for mild steel flat iron as in wind tie for roof including necessary drilling for securing bolts etc, complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid dry or laid dry and pointed, complete all as specified and directed.

M&L for coloured designer Chequered cement concrete tiles 300mm X 300mm X 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate)as in foundation , filling and mass concrete complete all as specified and directed.

Dismantling of wall and ceiling or insulation boards/ slabs / PVC panelling any thickness and in any position including frame grid and cover fillets and framework etc complete all as specified and directed.

S&F for 8mm thick hollow printed coloured PVC sheet wall lining/panelling/Ceiling including frame work (sample kept in GE office) made of 1mm thick PVC sheet in strips and channels feathered at the edges for fixing of wall lining inclusive of solvent cement and fixing at site, complete all as specified and directed.

Designer type gypsum ceiling board/mineral fibre board of size 595mm x 595mm x 7-8mm thick as in ceiling, fixed with screws on GI grid frame work of size 600mm x 600mm, GI T-section of size 25mm x 25mm x 1.25mm, GI L-section 25mm x 25mm x 1.25mm, hanging arrangements with roof with GI wire not less than 4.00mm dia, including applying two coats of distemper oil emulsion (of approve shade) after preparation of surface, including taking down existing ceiling board of any description complete as per manufactures instructions, complete all as specified and directed.

Taking down cement plaster on brick walls & concrete surfaces & the like including raking out joints, hacking for key, scrubbing down with water etc., any description, including removal of rubbish outside MoD land ,complete all as specified and directed by the Engineer in Charge.

M&L for rendering 5mm thick in CM 1:3 on concrete surfaces on ceiling / facia /RCC Chhaja etc & finished even & smooth without using extra cement complete all as specified and directed..

M&L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed.

Preparation of new plastered wall surfaces and applying two coats of exterior acrylic emulsion paint (weather proof) in camouflaging patterns (in multi colour shades as approved by GE) over and including one coat of primer (antifungal), complete all as specified and directed by the Engineer-in-Charge.

Preparation of old plastered wall surfaces like brooming down or steel wire brushing scraping down smoke soot, moulds mass and efflorescent salt and trading oil and greasy spots and applying two coats of exterior acrylic emulsion (weather proof treatment), in camouflaging patterns including one coat of primer (antifungal), complete all as specified and directed.

M&L for preparation of newly plastered surfaces on ceiling and applying three coat of white washing, complete all as specified and directed.

M&L for complete removal of existing treatment through mechanical scraper machine for any type of existing surface of walls/ceiling complete all as specified and directed.

M&L for 1.5mm thick birla/JK wall care putty to receive smooth finishes complete all as specified and directed.

M&L for painting of treated surfaces to receive two coat of dry distemper on surfaces of walls and ceiling complete all as specified and directed.

M&L for preparation of old decorated plastered surfaces of walls/kerb stone and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation newly steel surfaces exc 10cm width or girth with and one coat of synthetic enamel paint of approved tint, complete all as specified and directed.

All as per ser item No 92 here-in-before but on wooden surfaces, complete all as specified and directed.

S&F for aluminium chequered grills as on aluminium windows, weight n.exc .0.50 kg/sqm and fixed including taking down of old unserviceable grill, complete all as specified and directed.

M&L in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed.

S&F for rubber beading for doors of any required size and having a width not exc 30cm, complete all as specified and directed.

S&F for MS drapery curtain rods 25mm dia of approved quality with two number brackets and necessary rings fixed in brick/concrete wall and decorative knobs on each end of curtain rod complete all as specified and directed.

repair to broken brick/stone wall and ceiling plastering (area of plaster exc 1.0sqm but not exc 5.0sqm in each job) to wall etc in tech area of air force station suratgarh complete all as specified and directed. Note:- Any item/material which are required for repair work provided by the contractor like cement, sand, aggregate and white cement etc shall be deemed to be included in this item only.

M&L for machine cut kota stone 18-20mm thick in patches (each patch area upto 1.0sqm) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including screed bed or bedding layer of mortar 20mm thick for laying of floor finishes in CM 1:6, rubbing and polishing, complete all as specified and directed.

M&L for in repair non-skid ceramic coloured tiles in patches (each patch area upto 1.0sqm) 7mm to 8mm thick area of each tile exceeding 0.11sqm but not exceeding 0.18sqm, in floors etc.laid over and including 15mm thick cement screed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for in repair glazed ceramic colour tiles in patches (each patch area upto 1.0 sqm) in vertical surface of size 450mm X 300mm x 7mm thick,over and including 10mm thick cement plaster in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for in repair light coloured vitrified tiles, in patches (each patch area n exc 1.0sqm) 8mm to 10mm thick (square/rectangular) jointless , area of each tiles exceeding 0.36sqm but not exc 0.42Sqm, in floors etc laid over and including 15mm thick cement screed in CM 1:6, set and jointed complete all as specified and directed.

Cleaning of septic tank upto 2 metre depth and removal of sludge/silt etc in foul conditions to outside MOD land including testing of manholes by filling with water complete all as specified and directed by Engr-in-Charge.

S&F for wall hung WC of size 360mm X 540mm X 405mm with soft close seat cover complete all as specified & directed. Make : Jaquar Cat No.: FNS-WHT-40951 & FLV-1073C or equivalent of GROHE.

S&F for viterous china Counter top wash hand basin of size 700mm X 435mm X135mm complete all as specified and directed. Make : Jaquar Cat No.: ARS-WH-39903 or equivalent of GROHE.

S&F for CP brass 32mm dia waste coupling of 130mm height for WHB complete all as specified and directed. Make : Jaquar Cat No.: ALD-WHM-709 or equivalent of GROHE.

S&F CP brass 32mm bore bottle trap (with internal partition) with 300mm & 190mm long wall connection pipes & Wall flanges complete all as specified & directed. Make : Jaquar Cat No.: ALD-CHR-769L 300x190 or Equivalent of GROHE.

S&F for 600mm long braided hose with two 15mm nuts & O-ring rubber washer complete all as specified and directed. Make : Jaquar Cat No.: ALD-CHR-801B or equivalent of GROHE.

S&F for CP brass hand shower (health faucet) with 8mm dia 1m long flexible tube & wall hook complete all as specified and directed. Make : Jaquar Cat No.: ALD -579 or equivalent of GROHE.

S&F for slim concealed cistern with floor mounting frame, installation kit and 'P' type drain pipe connection set for wall hung WC (without flushing plate) complete all as specified and directed. Make : Jaquar Cat No: JCS-WHT-2431FS or equivalent of GROHE.

S&F for control plate segment chrome plated flushing plate for concealed flushing cistern complete all as specified and directed. Make : Jaquar Cat No.: JCP-CHR-102425 or equivalent of GROHE.

S&F in repair 0.65mm thick sunmica of the approved shade & pattern on the existing woodwork complete all as specified and directed.

S&F for 12mm thick teak plyboard with teak face veeners on one face on the existing wood work, complete all as specified and directed.

S&F for 18mm thick teak plyboard with teak face veeners on one face on the existing wood work complete all as specified and directed.

Procurement of empty new PVC sand bags and filling the bags with and including tibba sand / approved earth (as approved by GE) from sources outside defence land for forming embankments / area filling including raising. filling the bags with tibba sand / approved earth minimum 22Kg in each bags, sealed the sand bags with 6mm nylon rope and stacking the bags up to 8.00 metre height by head load in such manner and arrangement as directed including taking down old cement bags, small bushes if any, and making the surface of required shape for sand bag complete all as specified and directed by the Engineer in Charge. Note:- (i) Colour of bag shall be approved by GE. (ii) Tibba sand / Earth required for the item, shall be supplied by contractor from out side MOD land of any lead at his own arrangement. (iii) All cost of procurement of earth/tibba sand including cost of transportation, compaction, royalties, tax etc shall be deemed to be included in the unit rate quoted by the contractor.

M&L for over embankments area of traverse shall approved Sand filling around holes including raising and filling with approved sand or approved earth up to 8.00 metre height by head load in such manner and arrangement as directed including taking down damage portion and clean small bushes if any, and making the surface of required uniform shape complete all as specified and directed by the Engineer in Charge. Note:-(i) Tibba sand / Earth required for the item, shall be supplied by contractor from out side MOD land of any lead at his own arrangement. (ii) All cost of procurement of earth/tibba including cost of transportation, compaction, royalties, tax etc shall be deemed to be included in the unit rate quoted by the contractor.

Rough cast plaster over and including base coat of rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and fair on external surfaces of brick work, complete all as specified and directed.

Contract Amount shall be derived after affecting the amount of Schedule of Credit in General Summary on serial page No 17 of tender documents.

H S BUILDERS

Bhawani Enterprises

M/S Shree Ram Enterprises