Repairs to RCC School Building (North Face) at Mookkampatty PUMS in Mookkampatty Panchayat

Amount

Special ceiling Plastering with cement mortor 1:3 mix 10mm thick including cost of conveyance of all materials to work site and all labour charges etc. complete.

Dismantiling One Course of Pressed Tile Roof finish in cement mortar

Finishing the top of the roof with one course of Machine PressedTiles of size 23x23x2 cm of approved quality laid in CEMENT MORTAR 1:3(One cement and three sand) 12 mm thick mixed with water proofing compound conforming to ISS by 2% weight of cement used and the joint pointed neatly to full depth of tiles with the same water proofing compound mixed with cement mortar,red oxide, etc., complete complying with standard specification

White washing two coats using shell lime including cost and conveyance and all labour charges etc

Painting two coats with approved Black Oxide for Old Black board syntactic enamel paint of approved quality and colour including ordinary scraping using brushes and neat finishing etc., complete complying with standard specification and as directed by the

Distempering the old walls and ceiling one coat with best oil bound distemper of approved quality including preparation of surfaces (the colour and quality should be got approved by the Executive Engineer before use) the rate includes cost of brushes, hig

Re Painting the walls with Two coats with first class quality Plastic Emulsion paint of approved colour over a priming coat including thorough scraping, clean removal of dirt. The rate includes cost of brushes, sand paper, plaster of parries, putty wherev

Painting the Old iron works two coats with syntactic enamel paint of approved quality and colour including ordinary scraping using brushes and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer

Wiring with 2x1.5 Sq.mm (22/0.3) PVC insulated SC unsheathed Cu. conductor of 1100v grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with T.W. swithc box and 5A F.T. switch with painting of suitable colour for open Light point (As per S.D. 21)

Supply of 3 plug point including all labour charges etc., completed (AS per S.D.36)

Supply and fixing of Tube 20W LED Tube Light for T8 Fitting (Single Side)

Supply and fixing of 1200mm(48") AC ceiling FAN complete with stepped etecronic 300w regulator with 300mm down rod on the existing clamp (As per SD 106)

Providing Cup-board Shutter with frame using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fitt

Brick work in CM 1:5 mix using country bricks ground moulded of size 22 x 11 x 7cm for the following including curing etc., complete complying with standard specifications.

Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putt

Supply and fixing of cuddapah slab 20-30mm for cubbord and thick and pointed with cm 1:3 mix 10thick etc., all complete

Provision for Bala Art Paint including all labour charges

GST Amount for providing Service to Government Contract Works for the above RENEWAL Works. { GST Amount is the Total GST Amount for overall quoted amount above this row in column "BB" for all works in this package} (Refer Clause 1.1 & 1.24 of Section 2 of Instruction to Bidders (ITB) of SBD)

K RAJKUMAR