AR MO to WSS Banikhet Surkhigalla in Tehsil Dalhousie Distt Chamba HP SH Repair of starter and automation panel at Padher

Repair and installation of VFD of 50 HP which wil operate one pump at a time i/c in built protection measures, like over load protection under load protection , under load protection, over voltage and under voltage protection, smoot runanad stop current limiter etc. It will be able to run in a large span of voltage variation within all lead and lifts.

Repair and installation of PLC for 10 HP starter panel which will operate the pumps in automatic and semi automaic mode as per direction of the site in charge.

Supply and installation of MCB 2 P 10A which will protect the panel circuit from any short circuit and also will act as safety switch.

Supply and installation of 1.5 HP 1 Phase starter for booster pump which includes the protection measure and starter stop command for the motor.

Supply and installation of on delay timer which will help the system work when the power failure is retained within all leads and lifts as per the direction of Engineer-in-Charge.

Supply and installation of contactor 220 V which will act as a power switch for passage of power from starter to motor terminals within all leads and lifts as per the Engineer-in-Charge.

Supply and installation of covered relay which will protect the motor from getting overloaded within all leads and lifts as per the direction of Engineer-in-Charge.

Supply and installation of Auxilary block in the conducter for the operation and feedback of particular contactor within all leads and lifts as per the direction of Engineer-in-Charge.

Supply and installation of glass relay 220 V which will take command from the push buttons and accordingly operate the starter totally in manual mode.

Supply and installation of 8 channel relay card with No and NC contacts inbult in order to pass the command from PLC to starter within all leads and lifts as per the direction of Engineer-in-Charge.

Supply and installation of voltage protection which will protect the system from over voltage and undervoltage scenarious within all leads and lifts as per the direction of Engineer-in-Charge.

Repair and installation of surge protection device which will protect the sytem from type-1 and type 2 without impacting the performance of the whole system within all leads and lifts as per the direction of Engineer-in-Charge.

Supply and installation of MCB 125 A at the incoming of starter panel and it will act as the main switch for the panel within all leads and lifts as per the direction of Engineer-in-Charge.

Supply and installation of control transformer order to generate neutral for the control system of the starter panel within all leads and lifts as per the direction of Engineer-in-Charge.

Supply and installation of float sensor to indicate the water level whetehr it is low or not and also it will avoid the dry run of the pump within all leads and lifts as per the direction of Engineer-in-Charge.

Supply and installation of round insulator for the completer protection of panel from the bus bars within all leads and lifts as per the direction of Engineer-in-Charge.

Supply and installation of output copper busbar to carry the heavy amount of current in the starter panel within all leads adn lifts as per the direction of Engineer-in-Charge.

Supply and installation of PVC Duct to make a better finishing touch within all leads and lifts as per the direction of Engineer-in-Charge.

Supply and installation of denril channel for the mounting of different item unsed in starter panels within all leads and lifts as per the direction of Engineer-in-Charge.

Supply and installation of GREEN PUSH BUTTON 220 VAC for the start operation of pumping machinery with green indication.

BUTTON 220 VAC for the stop operation of pumping machinery.

Supply and installation of YELLOW PUSH BUTTON 24 VDC for the reset operation of starter (VDF) with yellow indication with in all leads and lifts as per direction of Engineer-in-Charge.

RED INDICATION 220 VAC for the indication of R phase incoming supply with in all leads and lifts as per direction of Engineer-in-Charge.

Supply and installation of BLUE INDICATOR 220 VAC for the indication of 8 phase incoming supply.

Supply and installation of YELLOW INDICATOR 220 VAC for the indication of B Phase incoming supply.

Trip feed back so that the operator /engineer can know the status of starter (VFD) with in all leads and lifts as per direction of Engineer-in-Charger.

Supply and installation of NO Block for the operation and feed back of contractor used in starter panel with in all leads and lifts as per direction of Engineer-in-Charge.

Supply and installation of STOP BUTTON for the shut down of wholy system in emergency with in all leads and lifts as per direction of Engineer-in-Charge.

Supply and installation of SINGLE CORE CABLE FOR THE CONTROL SYSTEM OF STARTER AND PLC system with in all leads and lifts as per the direction of Engineer-in-Charger.

Supply and installation of SINGLE CORE CABLE FOR THE CONTROL SYSTEM OF STARTER AND PLC system with in all leads and lifts as per the direction of Engineer-in-Charger.

Supply and installation of SINGLE CORE CABLE FOR THE CONTROL SYSTEM OF STARTER AND PLC system with in all leads and lifts as per the direction of Engineer-in-Charger.

Supply and installation of SINGLE CORE CABLE for the control system of starter AND PLC system with in all leads and lifts as per direction of Engineer in Charge.

Labour charges for the repair and installation of above mentioned items in order to make the system work properly and as per the satisfaction of the Engineer-in-Charger.