Certain B and R repairs and camouflage painting to high rise building and OTM Accn including Depot area at 23 FAD Suranussi under AGE I SNS

Amount

M&L Demolition of brick work built in cement mortar including all quoins arches, pillars etc but including fair facing dressed stone work and precast concrete articles complete all as specified and as directed

M&L Demolition of cement concrete of any description and in any position not otherwise specifically provided for and pavings not exceeding 15 cm thick above or below ground level complete all as specified and as directed

Demolition of cement Concrete in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work cement concrete is reinforced (reinforcement cut as required to facilitate demolition) etc complete all as specified and as directed

Taking down cement or cement lime plaster of any description on brick or stone walls, etc incl raking out joints hacking for keys srubbing down with water etc complete all as specified and as directed

Taking down chowkats or frames with Shutters ( without taking off the shutter from the frame ) of area n.exc 1.50 Sqm each and removing from site complete all as specified and as directed

Taking down chowkats or frames with Shutters ( without taking off the shutter from the frame ) of area exc 1.50 Sqm but n.exc 4.00 Sqm & removing from site complete all as specified and as directed

Taking down shutters of any description exceeding 2.0 Sqm each complete all as specified and as directed

Taking down shutters of any description size exceeding 1 sqm and n.exc 2 sqm but refixing in the same opening complete all as specified and as directed

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings in roof covering completed specified and directed by engr-in-charge complete all as specified and as directed

M & L brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6.0m mean radius built in cement mortar 1:6 all as specified and directed by Engineer – in – Charge.

Ditto all as per item No 10 above but except brick work complete all as specified.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall ,fixed with J-type hook complete all as specified and as directed

S&F Pre- painted galvalume aluminum zinc coating GI based plain sheet ,sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall as in fire point,fixed with J-type hook complete all as specified and as directed

Dismantling posts or struts embedded in brick work/concrete (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground

S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering to Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to GdeFe 290(Gde E-165) complete all as specified and as directed

Supply & Fixing for steel windows 1.25 mm thick box type (primer coated) ERW hollow 'P' section of size 60mm x 25mm single rebate comprises of skeleton shutter ERW sec 50 x 20 mm & 1mm thick and openable leaf consisting two nos sash bar of T section 20x3mm complete welded to frame including cutting holes and making good dismanteled portion in cement concrete (1:2:4) type B-I four nos for each window including following fitting welded to shutter complete all as specified and as directed by Engineer-in-Charge :- (i) Hold fast 150mm long 12 mm x 3mm made to shape - 04 Nos each window. (ii) Handle of Z Section 20 x 25 mm, 100mm long 01 Nos each leaf. (iii) MS tower bolt 150 mm long-02 Nos each leaf. (iv) Z Section 20 x 25mm, 100 mm stopper - 01 Nos per leaf (v) Cleat 55 mm long of hollow square 15x20x63mm welded to hinges - 01 Nos per leaf. (vi) MS Box type hinges of size 75 X 12 mm - 02 Nos per leaf. (vii) MS Guard bars square 12mm dia @10 cm c/c with GI frame fixed to window frame. (viii) Fabrication and fixing Note : Glass and Wire gauge shall be measured and paid for separately.

Ditto all as per item No 16 above but with Gauged shutter

S&F galvanized mild steel wire cloth 0.56mm dia of wire and average width of aperture 1.18mm fixed with tinned tack or galvanised wire staple complete all as specified and as directed by engineer-in-charge.

S&F in 3mm th sheet glass ordinary quality glazing with oil putty in square n.exc 0.5 sqm in each pane

S & F Steel ventilator with top hung shutter including hinges, steel peg stay, incl glass and wire gauge complete all as specified and directed by engr-in-charge.

M&L for 35 mm thick 2nd clas hard wood,factory made Plain framed, panelled shutter with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated as specified in SSR Part I section 8 clause 8.2(a) complete all as specified and as directed

M&L for 35mm th IInd class Hard Wood glazed /gauged shutters open rebated and prepared to receive glass /gauge etc without sash bars edges of framing plain or chamfered rounded fitted with cut and mitred beads for securing glass/gauge etc all as specified in SSR Part I section 8 clause 8.2(a) including helical Door spring complete all as specified and as directed

S&F solid PVC door frame of size 50mmX 47mm made out of 5mm th plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed

S&F 30mm th factory made PVC door shutter solid panel consisting of frame made out of MS tubes for top & bottom rails .Ms frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC strip of 20mm width stuck inside with solvent cement for stiles and plain colourPVC sheet for top rail , lock rail &bottom rail on either side & as gap insert for top rail & bottom rail . Panelling of plain of plain colur PVC sheet to be fitted in the MS frame welded/sealed to stiles & rails with suitable PVC sheet beading and joined together with solvent cement ,etc all as specified and shown on drawings complete all as specified and as directed

S&F 30 mm th flush shutter solid core construction with block board core and plywood face panels commercial face on both faces complete all as specified and as directed

S&F in repair Vitreous china ware water closet Orissa pattern including connecting to trap and to flushing pipe anti Syphonage pipe etc complete , fixed as in repairs of size 580mm X 440mm complete all as specified. complete all as specified and as directed

S&F in repairs vitreous china water closet Padestal pattern( white ) includng trap but excluding fixing bolts, flushing cistern and flush pipe complete all as directed.

S&F in repairs PVC flushing cistern, 10 ltr capacity, valve less symphonic action type, low level, with intel, ball valve, float valve abd handle including brackets fixed in position, 32 mm dia PVC flush pipe and connection to water mains complete all as specified and directed by engineer-in-charge.

S&F in repairs vitreous china urinals Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with urinal spreader ,grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)complete all as specified and directed.

S& F in repair vitrious china wash hand basin flat back 550X400mm with padestal incl fixing bracket, pvc waste coupling and waste pipe,cp pillar tap swan neck etc all as specified and directed by engineer-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), rmoving servicable tiles to store and rubbish off the premises

M&L for Acid resistant/proof tiles 15 mm thick vitreous ceramic, unglazed, set, jointed and pointed in approved chemical resistant mortar, resin type, to match the shade of existing floors complete all as specified and directed by Engineer-in Charge

M&L for Acid resistant/proof tiles 10 mm thick vitreous ceramic, unglazed, set, jointed and pointed in approved chemical /chemical resistant mortar, resin type,to match the shade of existing walls complete all as specified and directed by Engineer-in Charge

M&L Non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over15 mm th screed or bedding layer in CM 1:6 complete all as specified and directed by Engineer-in Charge.

M&L for glazed ceramic tiles coloured of size 450mmx300mm x 7mm th on vertical surfaces such as in skirting, dado etc over 10 mm th backing coat in cm 1:4 complete all as specified and directed by Engineer-in Charge.

S & F Soap dish, any type, fixed to plugs with chromium plated brass screws

S&F in replacement 20 mm dia harrison rails stainless steel with decorative finish , with fixing stainles steel brackets , stops, rollers complete all as specified and as directed (two brackets per 1.5 M length and 08 Nos roller per 1.RM)

Taking down GI tubing and connections with all fittings 15 mm bore complete all as specified and as directed by engineer-in-charge.

Ditto all as per item No 39 above but 20mm bore.

S&F in repairs 15 mm dia GI tubing , medium grade, and connections fixed to wall or ceiling, laid in floor etc complete all as specified and as directed by engineer-in-charge.

S&F in repairs 20 mm dia GI tubing and connections fixed to wall or ceiling, laid in floor etc complete all as specified and as directed by engineer-in-charge.

S&F in repair PVC shower rose PTMT 15mm size fixed to iron pipe complete all as specified and as directed by engineer-in-charge.

S&F in repair pvc connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed by engineer-in-charge.

S&F in repair 15mm size stop valves ,Angle valve stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed PTMT high pressure screwed for iron pipe (make- Prayag) complete all as specified and as directed by engineer-in-charge.

S&F in repair 20 mm size stop valves Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixedPTMT high pressure screwed for iron pipe (make- Prayag) complete all as specified and as directed by engineer-in-charge.

S&F in repair 15 mm bore dia bib tap (long or short body) cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for union fancy type chromium plated concealed complete all as specified and as directed by engineer-in-charge.

S&F in repair towel rail 600mm long of PTMT incl cp brass srews andwooden/plasticcleats (Minimum weight 190 gms) complete all as specified

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

S&F in repairs Rotational moulded polythene water storage tanks double layer (cylinder each vertical with closed top) of capacity 500 Itrs, hoisted and fixed in position including pvc float valve 20mm size,specified in SSR Pt-1 Make : Sintex / Frontier / Polycon complete all as specified and as directed

S&F in repairs Rotational moulded polythene water storage tanks double layer (cylinder each vertical with closed top) of capacity 1000 Itrs, hoisted and fixed in position including pvc float valve 20mm size,specified in SSR Pt-1 Make : Sintex / Frontier / Polycon complete all as specified and as directed

Cleaning and removing all scale and dirt, etc, from tanks of capacity Exc 250 & n exc 500 Ltr and from mouths of circulating pipes, etc complete all as specified and directed by Engineer – in – Charge

Cleaning and removing all scale and dirt, etc, from tanks of capacity Exc 500 & n exc 1000 Ltr and from mouths of circulating pipes, etc complete all as specified and directed by Engineer – in – Charge

Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high complete all as specified and directed by engineer-in-charge.

Repair ,servicing and overhauling of rolling shutter gear operated type with chain wheel and hand chain of any size by oiling , greasing to gear box , guide channel , shaft , pully and minor repair to gear box, hood cover, pully etc and replacement of minor parts like spring ,pins, lathe etc and including securing guide channel to walls with PCC 1:2:4 type B1 and making gud the surfaces with CM (1:4) and making the rolling shutter functional to the entire satisfaction of the Engineer in charge all as specified and directed by Engineer-in Charge.(Any defected/ Broken part will be replaced without any cost and make rolling shutter fully functional complete all as specified and directed by engineer-in-charge.

S & F 1.25 mm thick of laths of steel rolling shutters, gear operated type with bevel gear box and crank handle as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type

M&L 15mm thick cement plastering in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified. (bldg ht may vary upto 10.00mtr).

M&L rendering 15mm thick on fair faces or other than fair faces of brick work in CM 1:4 finished even & smooth without using extra cement all as specified and directed by Engineer - in - Charge (bldg ht may vary upto 10.00mtr).

M&l for 5 mm th rendering in cement mortar in 1:3 on ceiling complete all as specified and as directed (bldg ht may vary upto 10.00mtr).

M&L for two coats of white wash on newly plastered surface of walls incl preparation of surface complete all as specified

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces (bldg ht may vary upto 10.00mtr).

M&L for three coats of white wash on newly plastered surface of ceiling incl preparation of surface complete all as specified (bldg ht may vary upto 10.00mtr).

M&L for removal of old paints and preparing old decorated plastered or unplastered surface of walls and applying Two coats of Apex paint (Exterior acrylic emulsion paint) in camouflaging pattern as per design given by Engineer-in-Charge on wall and roof, for similar articles etc. complete all as specified and directed by Engineer-in-Charge (bldg ht may vary upto 10.00mtr).

M&L preparing old surfaces of walls and applying one coat of oil bound distemper complete all as specified

M&L preparing old decorated surfaces of walls and applying one coat of white wash complete all as specified

M&L preparing old surfaces of walls and applying one coat of cement base paint complete all as specified

M&L for preparation of old painted steel surfaces of any description over 10cms width or girth and applying one coat of syntehtic enamel paint on steel surfaces in camouflaging pattern comple all as specified (bldg ht may vary upto 10.00mtr).

Dismantling brick tile or terracing tile single layer on roof complete all as specified and as directed by engineer-in-charge. (bldg ht may vary upto 10.00mtr).

Demolition of mud in roofs any thickness including plastering and leeping (weather full thickness removed or part there of) complete all as specified and as directed by engineer-in-charge. (bldg ht may vary upto 10.00mtr)..

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by engineer-in-charge..

M&L for 75 mm average consolidated thickness PCC 1:3:6 type C2 with using 20mm graded stone aggregate as in padding on flat roofs etc all as specified and directed. (bldg ht may vary upto 10.00mtr).

Supply only Integral water proofing compound complete all as specified and as directed by engineer-in-charge.

M&L for Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm over a coat of primer including cleaning surfaces complete all as specified and as directed by engineer-in-charge. (bldg ht may vary upto 10.00mtr).

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) laid on primed surface by torch application complete all as specified and as directed by engineer-in-charge. (bldg ht may vary upto 10.00mtr)..

M&L for 40mm thick brick tiles laid on cement mortar bed ( 1:3) with WPC and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement and pointed in CM (1:3) complete all as specified and as directed by engineer-in-charge. (bldg ht may vary upto 10.00mtr).

All as per item No above but except brick tiles

M&L Providing, cement concrete type B 1 (1:2:4) (using 20 mm aggregate), as in roof kerbs or mud stops, rounded or chamfered on edges parapets copings, bed plates, etc

Cutting grooves of size 75mm wide and 65mm deep in brick parapet wall for inserting APP membrane and making good the disturbed portion in CM (1:3)

Form work to soffits of suspended slab such as roof slab n exc 200mm thick (horizontal/sloping/vertical) with fair finished surface complete all as specified

Dismantling wrought iron or mild steel work of any description not otherwise provided for

M & L TMT bars 6mm to 8mm dia. cut to length bent to shape required including cranking, bending and binding with and including ms wire (annealed) n. less than 0.9mm dia or securing with clips complete all as specified

M&L Reinforced cement concrete (nominal mix) Type B-0 1:2:4 (12.5mm graded aggregate) in slabs supported on walls, beams, columns deck slabs and in shelves, the like all as specified and directed by Engineer - in - Charge .

M & L Reinforced cement concrete (nominal mix) Type B 0 1:2:4 (12.5mm graded aggregate) in Chajjas all as specified and directed by Engineer - in - Charge

M&L for 75 mm th cement concrete type C-2, 1:3:6 as in plinth protection with using 40mm graded stone aggregateincl making joints at every 2.5m and at corner filled with bitumen 85/25 and sand in ration 1:2 by weight etc complete all as specified and as directed by engineer-in-charge.

M&L for 40mm th PCC 1:2:4 type B1 (using 20mm graded aggregate) as in flooring incl finishing the surface even and smooth with using extra ement complete all as specified and as directed by Engineer-in-charge.

S&F Anodised aluminium frame powder coated with minimum thickness of power coating 50 micron for doors, windows, ventilators with one or more rebates including joining cleat for fixing, hinges etc. complete all as specified. Make:- INDAL/HINDALCO/JINDAL or equivalent as per IS.

S&F 0.71 mm thick Plain, Aluminium sheeting, Alloy 31000 H4 in doors, ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed)

S&F 300mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedon stapple plate complete all as specified

S & F 450 mm long aluminium anodised, skeleton tower bolts with plate, staples and bolt of extruded section and fixed

S & F 600 mm long aluminium anodised, skeleton tower bolts with plate, staples and bolt of extruded section and fixed

S&F 100 mm size mild steel butt hinges medium weight cold rolled complete all as specified and as directed by engineer-in-charge.

S & F Neoprene/ EPDM rubber gasket all as specified and as directed by engineer-in-charge.

S&F 150 mm size Aluminium handle fixed complete all as specified and as directed by engineer-in-charge.

Dismantling Matting, single or double any type including, if any

M & L for 3.2/3.3 mm thick Linoleum, plain coloured, laid dry in floors, linoleum is sealed down with an approved adhesiveincluding stretching, cutting and fitting complete all as specified and directed by Engineer-in Charge.

AAY KAY Constructions (BID ID -3094329)

KAMAL AGGARWAL (BID ID -3095379)

SONA BUILDERS (BID ID -3094298)