Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.7 LAccepted-AOC | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹26.4 L+₹10,812 (0.41%)Rejected-AOC | L2 | Rejected-AOC Rejected being L2 | |
| 3 | L3₹26.5 L+₹20,065 (0.76%)Rejected-AOC | L3 | Rejected-AOC Rejected being L3 | |
| 4 | L4₹26.7 L+₹42,371 (1.61%)Rejected-AOC 301 CHAMUNDA ENCLAVE PLOT NO 89 AIROLI SECTOR 8A NAVI MUMBAI 400 708 | THANE | MAHARASHTRA | 400708 | L4 | Rejected-AOC Rejected being L4 | |
| 5 | L5₹26.8 L+₹49,488 (1.88%)Rejected-AOC | L5 | Rejected-AOC Rejected being L5 |
Tender Value
Refer Docs
EMD Value
₹50,000
Closing Date
13 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer
GE 867 EWS Pin 913867 C/O 99 APO
REPAIR/MAINT OF EXTERNAL WATER SUPPLY LINES AND ACESSORIES, CLEANING OF UG SUMP, SERVICE TANK AND MISC ALLIED WORKS AT PEDONG, ALGARAH, AP ALGARAH, DALAPCHAND AND TEESTA TCP UNDER GE 867 EWS
2022_MES_564808_2
GE/867/43/TOKEN OF 2022-2023
Open Tender
Civil Works - Water Works
Item Wise
240 days
GE 867 EWS
As per tender documents
8 documents required · 8 mandatory
₹500
GE 867 EWS
₹50,000
23 Feb 2023
29 Dec 2022
16 Jan 2023
29 Dec 2022
13 Jan 2023
6 Jan 2023
29 Dec 2022 - 9 Jan 2023
Amount
M&L for Cleaning of semi under ground water sumps of 50,000 Gln Capacity of water, taking out solid residual loose dirt, scales, mud, fungus, vegetation growth, scrubbing the complete inner surface of wall and floor with wire brushes and cleaning with water and again cleaning and washing completely using bleaching powder and fresh water, drying the entire surface and applying two coats of lime wash internally and writing the date of cleaning on external surfaces with thick synthetic enamel paint in bold Capital letters (not exceeding 15 cm high) complete all as directed by the Engineer-in-Charge.
All as per Item No 01 here-in-before but 35,000 Gln capacity and all asspecified and directed by the Engineer-in-Charge
All as per Item No 01 here-in-before but 10,000 Gln capacity and all asspecified and directed by the Engineer-in-Charge
All as per Item No 01 here-in-before but 5,000 Gln capacity and all asspecified and directed by the Engineer-in-Charge
M&L for disconnecting existing PVC water tanks of 2000 Ltrs capacity, setting aside (or lowering if requried) cleaning and removing all scale, pollutants & dirt etc. from tanks and mouths of circulating pipes etc. by using bleaching powder and writing/marking MES Number and date of cleaning on external surfaces with thick synthetic enamel paint in bold capital letters (not exceeding 15 cm high) and hoisting if requried, re-connecting and re-fixing in position complete all as specified and directed by the Engineer-in-Charge.
All as per Item No 05 here-in-before but 1000 Ltrs capacity and all asspecified and directed by the Engineer-in-Charge
All as per Item No 05 here-in-before but 500 Ltrs capacity and all asspecified and directed by the Engineer-in-Charge
All as per Item No 05 here-in-before but 250 Ltrs capacity and all asspecified and directed by the Engineer-in-Charge
M&L for construction of Valve chamber of internal dimension/size 600 x 600 x 600 mm, with 200mm thick pre-cast PCC solid block masonry (made of PCC (1:3:6) type C-1 : using 20mm graded crushed stone aggregate) wall in cement mortar (1:6), with 1.6 mm thick MS sheet cover, fixed with 25x25x6 mm stiffner welded around, welded over angle iron frame of size 65 x 65 x 6 mm with locking arrangements including applying two coats of first grade synthetic enamel paint (of approved tint) over a coat of red oxide primer on steel surfaces, necessary earth work in soft/loose soil with and including 100 mm thick PCC (1:3:6) Type C-2 (using 40mm graded stone aggregete) as in foundation, 50 mm thick PCC (1:2:4),Type B-1 (using 20mm graded stone agregate) as in coping on top including rendering 10mm thick in cement mortar (1:6), finished even and fair and applying three coats of white wash on exposed surfaces, complete including demolition of existing unserviceable valve chamer complete all as specified and directed by the Engineer-in-Charge. (The chamber shall be 150 mm above the ground level).
All as per item No 9 above but Valve chamber of internal dimension/size 900 x 900 x 900 mm.
S&F gun metal, globe or gate valves of 50 mm bore dia., with iron wheel head, screwed both ends for iron pipes and fixed including taking down old unserviceable one.
All as per Item No 11 here-in-before but 40 mm bore dia and all asspecified and directed by the Engineer-in-Charge
All as per Item No 11 here-in-before but 25 mm bore dia and all asspecified and directed by the Engineer-in-Charge
All as per Item No 11 here-in-before but 20 mm bore dia and all asspecified and directed by the Engineer-in-Charge
Supply only Aquafit brand calcium hypo chlorite 65% to 70% chlorine content in granualr and tablet form complete all as specified and as directed. Make: As per E-in-C/Command approved make.
Dismantling of old unserviceable tank of any make existing PVC water tanks 2000 Ltrs capacity all as specified and as directed.
All as per Item No 16 here-in-before but 1000 Ltrs capacity and all asspecified and directed by the Engineer-in-Charge
All as per Item No 16 here-in-before but 500 Ltrs capacity and all asspecified and directed by the Engineer-in-Charge
All as per Item No 16 here-in-before but 250 Ltrs capacity and all asspecified and directed by the Engineer-in-Charge
S&F in replacement rotational moulded polythene water storage tank (cylindrical vertical with closed tops) hoisted and fixed in position of 2000 Ltrs capacity, all as specified and as directed. Make : Polycon/Sintex/Reno/Titaki.
All as per Item No 20 here-in-before but 1000 Ltrs capacity and all asspecified and directed by the Engineer-in-Charge
All as per Item No 20 here-in-before but 500 Ltrs capacity and all asspecified and directed by the Engineer-in-Charge
All as per Item No 20 here-in-before but 250 Ltrs capacity and all asspecified and directed by the Engineer-in-Charge
Taking up or down existing galvanized iron water tubing and connections, carefully without any damage from the trenches, ground or walls of the 80 mm bore sizes, including cleaning and stack at site for relaying all as specified and as directed(Excavation and earth work will be measured and paid seperately.
All as per Item No 24 here-in-before but 50 mm bore and all asspecified and directed by the Engineer-in-Charge
All as per Item No 24 here-in-before but 40 mm bore and all asspecified and directed by the Engineer-in-Charge
All as per Item No 24 here-in-before but 25 mm bore and all asspecified and directed by the Engineer-in-Charge
All as per Item No 24 here-in-before but 20 mm bore and all asspecified and directed by the Engineer-in-Charge
S&F in replacement steel water tubing of the 80 mm bore sizes, ‘Medium grade’, galvanized, with all fittings; laid in trenches or on ground.(Excavation and earth work measured and paid separately)
All as per Item No 29 here-in-before but 50 mm bore and all asspecified and directed by the Engineer-in-Charge
All as per Item No 29 here-in-before but 40 mm bore and all asspecified and directed by the Engineer-in-Charge
All as per Item No 29 here-in-before but 25 mm bore and all asspecified and directed by the Engineer-in-Charge
All as per Item No 29 here-in-before but 20 mm bore and all asspecified and directed by the Engineer-in-Charge
Re-fixing the old steel tubing and connections in new or old position in trenches, ground, of 80 mm bore sizes all asspecified and directed
All as per Item No 34 here-in-before but 50 mm bore and all asspecified and directed by the Engineer-in-Charge
All as per Item No 34 here-in-before but 40 mm bore and all asspecified and directed by the Engineer-in-Charge
All as per Item No 34 here-in-before but 25 mm bore and all asspecified and directed by the Engineer-in-Charge
All as per Item No 34 here-in-before but 20 mm bore and all asspecified and directed by the Engineer-in-Charge
Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr in depth; for foundation etc. and getting out in Soft/loose soil all as specified and directed by Engr-in-Charge.
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm in Soft/loose soil all as specified and directed by Engr-in-Charge.
Removing excavated material n.exc 50 mtr and depositing where directed at level n.exc 1.5 mtr above the starting point all as specified and directed
M & L for painting on old surfaces of GI/CI pipe lines including prepration of old surfaces with two coats of synthetic enamelled paint on a coat of red oxide primer complete all as specified and as directed.
S&F PVC cover for polythene water storage tanks of 2000 Ltrs capacity of different make like sintex/polycon or eqvli etc, with suitable nuts, bolts and locking arrangement incl removing the broken unserviceable one all as specified and directed by Engr-in-Charge.
All as per Item No 43 here-in-before but 1000 Ltrs and all asspecified and directed by the Engineer-in-Charge
All as per Item No 43 here-in-before but 500 Ltrs and all asspecified and directed by the Engineer-in-Charge
M&L for cutting existing steel tubing for alterations or additions (Each cut measured) and inserting new Tee, bend, elbow etc for upto 40 to 50 mm dia size GI tubing all as specified and directed by Engr-in-Charge.
All as per Item No 46 here-in-before but upto 25 mm dia and all asspecified and directed by the Engineer-in-Charge
S&F PVC float valve, high pressure with polythene float and fly nut complete screwed for PVC pipe and fixed in 25 mm dia bore pipe incl taking down old u/s one all asspecified and directed. Make : PRAYAG or eqvt approved by GE
All as per Item No 48 here-in-before but upto 20 mm dia and all asspecified and directed by the Engineer-in-Charge
Excavation in post holes (or similar holes) each not exceeding 0.5 CuM, getting out, retaining, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exceeding 50 mtr and making good surfaces complete all as specified.
M & L for Providing precast cement concrete solid building block over 10cm in width and setting in mortar (1:6) using pre cast cement concrete Block (1:3:6) type C1 using 20mm graded stone agg all as specified and directed.
M & L for cement concrete (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in foundation , filling and mass concrete complete all as specified and directed.
M & L PCC (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate) as in coping including weathering, slightly rounded or chamfered angles and throating , as directed and necessary from work complete all as specified and directed.
M & L 15 mm thick rendering in cement mortar (1:4) on fair faces of brick or concrete surfaces , rendering finished even and smooth without using extra cement complete all as specified and directed.
M & L preparation of new plastered surfaces of walls and applying two coats of white wash on walls complete all as specified and directed.
M & L for painting on new iron surfaces with two coats of synthetic enamelled paint on a coat of red oxide primer complete all as specified and directed by the Engineer-in-Charge.
Cutting of PCC making holes inserting GI pipe and making good to the disturbed surfaces all as specified and directed.
S&F in replacement butter Fly Valve lever operated conforming to IS 13095 of size upto 100 mm dia PN 1.6, connected with two end flanges suitable for connecting with GI Pipe medium grade, nut-bolts etc including taking down old unserviceable one complete with flanges nut - bolts etc all as specified and directed.
S&F in replacement butter Fly Valve lever operated conforming to IS 13095 of size upto 80 mm dia PN 1.6, connected with two end flanges suitable for connecting with GI Pipe medium grade, nut-bolts etc including taking down old unserviceable one complete with flanges nut - bolts etc all as specified and directed.
M&L for collecting the raw water sample from any location at Pedong military stn, chemical laboratory testing of water from local PHE department and submit the report to concerned JE (E/M)/Engr-in-Charge complete as directed.
Supply and fixing in replacement of oil immersed star delta starter heavy duty suitable for 60 HP 3 phase induction motor pump current rating 90-110 Amps manually operated complete all as specified and as directed.
S&F in replacement cast iron sluice valve PN 1.6 class of 150mm dia, both ends flanged, with iron wheel, brass spindle complete with jointing materials, nuts, bolts, washers and rubber sheet etc including dismantling old unserviceable one all as specified and directed.
S&F in replacement cast iron sluice valve PN 1.6 class of 100mm dia, both ends flanged, with iron wheel, brass spindle complete with jointing materials, nuts, bolts, washers and rubber sheet etc including dismantling old unserviceable one all as specified and directed.
S&F in replacement cast iron sluice valve PN 1.6 class of 80mm dia, both ends flanged, with iron wheel, brass spindle complete with jointing materials, nuts, bolts, washers and rubber sheet etc including dismantling old unserviceable one all as specified and directed.
M&L for replacement of old unserviceable sign board with LED glow sign board complete with arclic raise alongwith LED pasted of size 4.5x2 feet making as below mentioned in MES installation at Pedong military station incl suitable structure with metallic pillar on both side and provision of electric supply arrangement for fixing of LED sign board complete all as specified and as directed.
Taking down and dismantling the pump 415 volt, 3 phase, 50 HP/60HP capacity installed at pump house by removing allfoundation nut-bolts, coupling nut-bolts completely, removing and replacement of the unserviceable parts and resembling the pump, refitting with motor with necessary coupling joint, return back to existing pump house, refitting to its original position, electrically connection, testing and commission complete all as directed by Engr-in-Charge. Note: (i) Repairing of foundation, welding of base plate, metalling of shaft, spare parts for pump, repairing/overhauling of pump and motor, paiting of pump and motor shall be measured and paid separately (ii) Rates are inclusive to and fro transportation charges, cost of petty items like oil, grease, packing materials etc.
Taking down and dismantling the pump motor 415 volt, 3 phase, 37.5 kW/45 KW capacity by separating starter and rotor cleaning with super quality cleansing agent and taking out old unserviceable bearing, re-assembling the pump, refitting with motor with necessary coupling joint at existing position including electrical connection all as specified and directed. Note: (i) Repairing of foundation, welding of base plate, metalling of shaft, spare parts for pump, repairing/overhauling of pump and motor, paiting of pump and motor shall be measured and paid separately (ii) Rates are inclusive to and fro transportation charges, cost of petty items like oil, grease, packing materials etc.
Supply only bronze impeller including trimming of dia if required to match the exisitng with stainless steel key complete all as specified and directed.
Supply only impeller lock ring complete all as specified and as directed.
Supply only roller bearing complete all as specified and as directed.
Supply only ball bearing complete all as specified and as directed.
Supply only guide ring made of stainless steel for left and right side of impeller complete all as specified and as directed.
Supply only gland bush made of mild steel of superior grade including nuts bolts with washers and filling of gland packing complete all as specified and as directed.
Material and labour for opening up the motor 50/60 HP carefully and removing burnt windings from starter and rewinding with suitable gauge of super enamelled copper insulated wire and superior insulating material including varnishing, heating greasing replacement of wornout bearing reassembling the same including testing on full load upto entire satisfaction complete all as specified and as directed. Note: The cost of bearing will be measured and paid separately.
Repair to u/s sluice valve 150/100/80 mm bore by dismantling all the parts after removing from site and replacement of all parts like nuts, bolts, gasket, washer etc to make fully serviceable and refixing the same in original position including necessary connection.
Repairing of MS base of 50/60 HP centrifugal pumpset made with channel as per exisitng size with necessary cutting and welding of channel after taking out old u/s channel base from existing position and making good the disturbed surfaces including all nut bolts washers of any size.
Note: In case doubling/duplicancy of BOQ items , the lowest quoted rate shall be applicable for payment.
DEDUCTED AMOUNT OF SCHEDULE OF CREDIT
HEM RAJ GURUNG
ANTHONY PRADHAN
S K ENTERPRISES
MS MAYA PRAKASH GOEL AND SONS
SANJAY SAW MILL
DEEP CHANDRA JOSHI
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .