Concretization of various roads in ward no 16 and Ward No 18 of Wagle Ward Committee area by UTWT Method in Package No 7

Amount

Excavation for roadway in soft rock, including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading or stacking as directed.

Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed.

Compacting the hard murum side widths including laying in layers on each side with power roller including artificial watering etc. complete.

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, plywood/steel formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Providing and laying concrete pipes of I.S.NP. class of 225mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.

Providing and laying concrete pipes of I.S.NP. class of 300mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.

Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, plywood/steel formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Intelligent Compactor with compaction analyzer and V-Sat attachment. to the required density. Grading II (Using Screening Type B (11.2 mm) Aggregate)

Providing and fixing in position TMT FE 500, tie bars precoated with anticorrosive epoxy paint of 12 mm dia. 70 cms.long and at 30.00 cm. C/C and wherever directed including handling, straightening wrapping with paper of approved quality for half length, necessary cutting, handling, straightening , supported by assembly of TMT FE 500, chairs with proper alignment etc. complete.

Milling upto 60 mm depth asphaltic surface by using milling machine incld. Transportation as directed. Note - for further passes of 60mm or part thereof, same rate will be applicable.

Providing and Laying M60 grade cement concrete of approved mix design with avg. Flextural strength of 4.4 MPa in 3 days from R.M.C. plant incld. use of micro silica/alcofine, approved make super plastiser and retarder, fibriliated 100 % virgin polypropylene fibres, fly ash and transported by transit mixer and placing at work site. Compacting, finishing, initial curing by approved curing compound/ contractors water and tarring the sides of slab with hot bitumen as specified and as directed (w/c ratio 0.28 max.). (vatta for curing will be paid separately) for Ultra thin White Topping (UTWT) pavement. etc completed.

Green Cutting of construction & dummy joints of concrete grade M 40 and above (UTWT) pavement by mechanical means within 10 to 12 hrs after casting of bay / slab upto 1/3 rd depth of pavement and 5 to 6 mm wide as directed

Providing and Placing 5mm thick Thermocole in dummy and construction joints immdtly after cutting of joints and removing the same before dressing of dummy and construction joint as directed etc. complt.

Providing and construction of cement vatta in C.M.1:10 at 0.6 M X 0.6 M c/c admeasuring 0.09 meter at bottom, 0.04 m at top and 0.075 m deep and maintaining the same throughout 7 days curing period and removing the same material as directed.

Sealing of M-35 & above new C.C. pavement dummy, transverse, longitudinal joints with hot rubberised sealing compound confirming to IS 1834-1984 after proper cleaning with compressed air, applying required primer & providing a layer of lime powder over hot sealing compound as directed. Sealing 5mm - 6 mm wide & avg. depth of 40 mm transverse & longitudinal joints

Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface- Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorizing glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.complete.

a ) White

b ) Yellow

Providing and constructing Brick Masonry inspection Chamber 90cm x 45cm including 1:4:8 C.C foundation, 1:2:4 C.C.channels/half round glazed stoneware pipe channel, salt glazed stone-ware intercepting trap with rodding pipe set in 1:4:8 cement concrete block, brick masonry plastering inside and Outside, with C.I. lead cover of 75 kg with frame fixed in cement concrete.

a) Add for every increase in depth of 30cm or part thereof

Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete

Dismantling the R.C.C. Work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete.

Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete.

Providing and Laying concrete pipes of I.S.NP.2 class of 450 mm dia half round pipe in proper line, level and slope including, nesessary collars, testing, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench etc. complete.

Supply of excavator cum loader machine (like JCB machine) etc complete

Transportation of excavated material including loading and unloading etc. complete.

a) Lead upto 1 Km

b) lead up to 3 km

c) lead up to 5 km

d) lead up to 7 km

e) lead up to 10 km

f) lead up to 15 km

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing and laying in situ / ready mix M25 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for RCC work in solid/ deck slab etc. including ramming, vibrating, curing, formwork, centering and finishing in cement plaster excluding reinforcement etc. complete. (height up to 4 meter with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer with Natural / VSI standard Artificial Sand)

Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 3.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary)

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.

P/F precast M-20 grade concrete water table size 50 cm X30cm X 10cm etc. complete.

Providing , supplying and fixing Precast Kerb stone of M-25 grade and applying 3 coats of flat oil paint etc. complete.

Providing and fixing on walls/ ceiling/ floors, ....... mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 1.48 Kg/metre with necessary fittings. remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

a) 15 mm dia

b) 25 mm dia

c) 40 mm dia

d) 50 mm dia

Providing and fixing on walls/ ceiling/ floor ...... mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

a) 15 mm dia

b) 25 mm dia

Providing and applying tack coat with bitumen emulsion (RS1) using emulsion pressure distributer at the rate of 0.20 kg per Sq.M. on the prepared bituminous cleaned with mechanical broom

DENSE BITUMINOUS MACADAM: Proving and laying dense bituminous macadam using crushed aggregates of grading 2, premixed with bituminous binder VG-30 Bitumen @ 4.50 per cent by weight of total mix and filler, transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired density for 50/75 mm compacted thickness .USING 80 TPH Batch mix type hot mix plant with SCADA, Sensor Paver, Intelligent Compactor with compaction analyzer and V-Sat attachment with Stone Dust filler.

BITUMINOUS CONCRETE:- Providing and laying bituminous concrete using crushed aggregates of grading 2, premixed with bituminous binder @ 5.20 per cent by weight of total mix and filler, transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction for 30/40 mm compacted thickness with VG-30 Bitumen,Excluding prime / tack coat. For Bitumen VG-30 bulk -- USING 80 TPH Batch mix type hot mix plant with SCADA, Sensor Paver, Intelligent Compactor with compaction analyzer and V-Sat attachment with Stone Dust filler

Providing and fixing in position steel fibre reinforced concrete (S.F.R.C.) frame and covers of approved make including laoding,unloading,transportation, all taxes,etc.completed as directed by Enginner-in-charge(20 tonnes capacity) b)560 mm dia.

Providing and fixing in position steel fibre reinforced concrete (S.F.R.C.) frame and covers of approved make including loading, unloading, transportation, all taxes, etc.completed as directed by Engineer-in-charge (20 tonnes capacity) d)90X60 mm

Raising or lowering Rectangular manhole cover to the required level upto 30 cm including all material, formwork etc. with 16 cm tk cement concrete M-15 (1:2:4) c.c. coping under frame and cover of manhole, incl curing etc. complete as specified and as directed

Raising or lowering Circular manhole cover to the required level upto 20 cm including all material, formwork etc. with 16 cm tk cement concrete M-15 (1:2:4) c.c. coping under frame and cover of manhole, incl curing etc. complete as specified and as directed

Providing and fixing of retro- reflectorised informatory sign board rectangular/Square in shape having area less than 0.9 square meter made out of 2mm aluminum sheet bonded with white retro reflective sheeting of Class B ( Type IV High intensity micro prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3, supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with two coats of grey stove enamel paint and supported on one no. mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt long firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25 cm width including GI fixures and transportation etc.complete.The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded. Class B ( Type IV High intensity micro- prismatic grade sheeting-HIP) sheeting shall have 7 years written warranty from the manufacturer and authorised

Providing and fixing Mandatory/Regulatory sign boards in circular shape of 900 mm dia made out of 2mm aluminum sheet bonded with white retro reflective sheeting of Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel paint and supported on one no. of M. S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the

Providing and laying in-situ M20 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate conforming to IS383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant/ non tilting mixer and Weigh batcher as per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver,compacted and finished in a continuous operation, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-in-charge. ( Reference MORTH 602)

Providing and laying Cast in situ/Ready Mix cement concrete M25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Providing & Fixing M. S. Grill of approved make and Size , including M20 grade Concrete support at the base as directed by engineer in charge

Tree Plantation

Metal I -Water absorption, Specific Gravity, Impact Value/Crushing Value

Metal I- Sieve Analysis

Metal I -Abrasion Value

Metal I- Flakiness Index & Elongation Index

Metal I- Stripping Value (for Bituminous work)

Metal II- Water absorption, Specific Gravity, Impact Value/Crushing Value

Metal II- Sieve Analysis

Metal II-Abrasion Value

Metal II-Flakiness Index & Elongation Index

Metal II-Stripping Value (for Bituminous work)

Water Bound Macadam-Grading, Water absorption, Specific Gravity, Impact Value/Crushing Value

Water Bound Macadam- Sieve Analysis

Water Bound Macadam- Abrasion Value

Water Bound Macadam- Flakiness Index & Elongation Index

Sand -i) Fineness Modulus (Sieve Analysis), Stilt & Clay Content

Bricks- Water Absorption(Set of 5 Bricks), Compressive Strength(Set of Brick), Efflorescence

Concrete- Concrete Mix Design (with all tests on basic materials

Concrete -Compressive Strength of C.C.Cube(Set of 3 Cubes) Concrete- M15

Concrete -Compressive Strength of C.C.Cube(Set of 3 Cubes) Concrete- M-20

Concrete -Compressive Strength of C.C.Cube(Set of 3 Cubes) Concrete- M-25

Concrete -Compressive Strength of C.C.Cube(Set of 3 Cubes) Concrete- M-60

Concrete -Compressive Strength of C.C.Cube(Set of 3 Cubes) Concrete- M-60 Flextural Strength (Beam)

Concrete- Permeability Test

Taking of Core samples in concrete pavement (Excluding Dead Journy Charges)

Wedge Shear Elelment Layer (Stone/Rubble)- Crushing Value/Compressive, Water absorption & Specific Gravity

Bitumen- Penestration,Softening Point,Flesh & Fire Point, Specific Gravity

Viscosity

Ductility/ Elastic Recovery

Extraction and Sieve Analysis of Bituminous mix (For BM/DBM/AC) (2 samples of extraction for one sieve analysis including extraction)

Water- PH Value, Sulphate & Chloride Content

G.I. Pipes- Weight per running meter, Diameter of pipe & wall thickness of pipe

Weight of Zinc coating per sq.m.

P.V.C. Pipes- Weight per running meter, Diameter of pipe & wall thickness of pipe

Steel Bar Testing- upto 16mm (Set of 3 Bars) (tensile strength, %, Elongation, Yield Stress, Weight-Per Meter, Bend/Rebend Test, Proof Stress.)- 8mm (Set of 3 Bars)

Steel Bar Testing- upto 16mm (Set of 3 Bars) (tensile strength, %, Elongation, Yield Stress, Weight-Per Meter, Bend/Rebend Test, Proof Stress.)- 10mm (Set of 3 Bars)

Steel Bar Testing- upto 16mm (Set of 3 Bars) (tensile strength, %, Elongation, Yield Stress, Weight-Per Meter, Bend/Rebend Test, Proof Stress.)- 12mm (Set of 3 Bars)

Steel Bar Testing- upto 16mm (Set of 3 Bars) (tensile strength, %, Elongation, Yield Stress, Weight-Per Meter, Bend/Rebend Test, Proof Stress.)- 16mm (Set of 3 Bars)

upto 16mm (Set of 3 Bars) (tensile strength, %, Elongation, Yield Stress, Weight-Per Meter, Bend/Rebend Test, Proof Stress.)- 20mm (Set of 3 Bars)

Steel Bar Testing- upto 16mm (Set of 3 Bars) (tensile strength, %, Elongation, Yield Stress, Weight-Per Meter, Bend/Rebend Test, Proof Stress.)- 25mm (Set of 3 Bars)

Non-Destructive Test- Rebound Hammer Test

M/s Shankar Mahadev and Co.

Bitcon India Infrastructure Developers Pvt Ltd