REPAIR TO ELECTRICAL SUPPLY LT NETWORK, WATER SUPPLY, INTERNAL ELECTRIFICATION, DG SET, WOODEN FURNITURE AND SUMMER APPLIANCES AT CHAUHTAN HILL UNDER GE (AF) UTARLAI

Amount

Supplying, fixing and testing in replacement of Street lights LED type 45W pressure die cast aluminium housing luminaires complete including taking down old u/s street light any type as directed by Engr-in-Charge. Make: Philips /Havells / Crompton/Jaquar

Supplying, fixing and testing in replacement of Street lights LED type 60W pressure die cast aluminium housing luminaires complete including taking down old u/s street light any type as directed by Engr-in-Charge. Make: Philips /Havells / Crompton/Jaquar

Supplying, fixing and testing in replacement of Flood lights LED type 120W pressure die cast aluminium housing luminaires complete including taking down old u/s street light any type as directed by Engr-in-Charge. Make: Philips /Havells / Crompton/Jaquar

Decarburizing /cleaning complete LT 415 Volts 3 phase panel/ bus bar chamber with electrical connections, complete bus bar from the bus bar chamber, cleaning and ensure proper decarburizing, refixing the same after applying Backtol Red solution to the bus bar insulator & checking all the connections, tightening the nuts, bolts & thimbles of in-coming/out-going system complete incl replacement of defective rusted bolts & nuts all as specified and directed.

M&L for painting on out door/ indoor LT panels/Bus bar chamber, with removing rust by wire bushes, applying painting of panel surface of any description using synthetic enamel paint of two coats by using spray gun after preparation of old painted surfaces complete all as directed

Supply and fixing in replacement of MCCB 4 pole, 415 V, 160 Amps, 16 KA with thermal and magnetic releases including necessary modification in the panel complete including taking down old u/s MCCB any type all as specified and as directed. Make: Legrand/L&T/Havells/Indoasian

Supply and fixing in replacement of MCCB 4 pole, 415 V, 100 Amps, 16 KA with thermal and magnetic releases including necessary modification in the panel complete including taking down old u/s MCCB any type all as specified and as directed. Make: Legrand/L&T/Havells/Indoasian

Supply & Laying in replacement in trenches or fixing on wall or passing through pipe or in cable ducts, 1100 volts grade 3.5 core XLPE armoured, electric power cables (heavy duty) with aluminium conductor of the following size . Note: The rate quoted will be inclusive of termination at ends with suitable aluminium lugs wherever required and taking down old u/s cable any size and type.

35 sqmm 3.5 core

16 sqmm 4 core

Excavation in trenches not exceding 1.5m wide and not exceding 10.0 sq m on plan and not exceding 1.5m depth and getting out soft soil.

Returing filling in including spreding leveling watering and well ramming in layer not exceding 25 cm as in soil all as specified and dirceted.

Removing excavated material not exceding 50 m and depostingwhere directed at a level not exceding 1.5 m above the starting point.

M & L for sand cushioning all around the cable for protection by natural tibba sand

Supplying and Laying stone patti 40-50 mm thick, 25- 30 cm wide abutting each other for cable protection

S&F Outdoor type double door front and rear openable AMF panel made out of 3.15mm thick CRCA sheet powder coated comprising of incoming MCCB 4 Pole-02 Nos + 4 pole contractors - 02 Nos, auto changeover and manual changeover for bypass arrangement with operating relays, Outgoing MCCB 4P-01 No complete wiring including Digital multifunctional meter for measurement of Amp, Voltage, frequency & energy for the three phase supply complete with battery charger for DG Set suitable for DG Set of Capacity 15 KVA including connecting with existing electrical system testing and commissioning complete all as specified and directed by Engr-in-Charge.

Supply and fixing of LT heat shrinkable sleeves 19mm size 2mm thick made of silicon colour Red on deteriorated cable sleeves complete all as specified and directed.

Supply and fixing of LT heat shrinkable sleeves 19mm size 2mm thick made of silicon colour yellow on deteriorated cable sleeves complete all as specified and directed.

Supply and fixing of LT heat shrinkable sleeves 19mm size 2mm thick made of silicon colour blue on deteriorated cable sleeves complete all as specified and directed.

Supply and fixing of LT heat shrinkable sleeves 19mm size 2mm thick made of silicon colour black on deteriorated cable sleeves complete all as specified and directed.

M&L for monthly 'A' Check Inspection of DG sets of capacities as described in Ser Item No. 2.00 to 25.00 including alternator, electric panel board connection to DG set etc for smooth functioning and carrying out maintanance as required at site and directed by Engr-in Charge. Note: Items/ Spares required shall be measured and paid separately under respective item of BoQ (i) Checking engine oil level and topping up as and when required. (ii) Checking and adjusting the belt for tension and replacement of belt if required. (iii) Checking of oil bath air cleaner level (iv)Checking of exhaust system for leakage (v) Draining of sediment from fuel filter and fuel tank (vi) Cleaning of air cleaner elements (vii) Checking engine alternator coupling, mounting bolts and alignment (viii) Tighting all nuts, bolts, in altenator terminal block (ix) Checking of alternator carbon brushes and connections in alternator (x) Checking and tightening of all connection in DC control wiring. (xi) Checking of all radiator rubber hoses for leakage and replacement if required. (xii) Checking and recording oil pressure, water and oil temperarute for smooth functioning. (xiii) Checking anti vibration mounting pads for any deformation. (xiv) Checking throttle linkage for smooth operation. (xv) Checking battery for cell test, electrolyte level, gravity and topping up to required level (xvi) Routine check / repair work of panel, switches, MCCBs, main switch, all contactors, engine control unit etc. (xvii) Checking of AMF panel, all electrical connections etc. (xviii) Checking of earthing resistance (xix) Cleaning of vegitation around the DG set up to 1.5 mtr area. (xx) 'A' Check Service shall be carried out as described in ser No. 2.00 to 25.00

320 KVA Capacity, Make : Cummins, Location : Chauhtan Hill Top

100 KVA Capacity, Make : Ashok Layland, Location : Chautan Base

15 KVA Capacity, Make : Cummins, Location : Chauhtan Base

M&L for 'B' Check once in Six month OR 250 Hrs running whichever is earlier DG sets of capacities as mentioned under respective item of BOQ, inspection, maintenance and serviceing including alternator, electric panel board connection to DG set etc for smooth functioning and carrying out maintenance as per OEM instructions and as directed by Engr-in-Charge. Note: (i) 'B' Check Service shall be carried out as described in respective item of BOQ (ii) Items/ Spares including 'B' Check kit, coolent, lubricating oil required shall be measured and paid separately under respective item of BoQ (i) Repeat the activities of 'Á' Check services (ii) Replacment of lubricant oil. (iii) Replacing lubricant oil filters element with O rings (iv) Replacing fuel filters element with O rings (v) Replacing air filter elements with O rings (vi) Replacing coolant.

320 KVA Capacity, Location : Hill Top

100 KVA Capacity, Location : Base

15 KVA Capacity, Location : Base

Supply only 'B' check kit for DG set of following capacities as mentioned in respective item of BOQ. Note : It includes oil filters (1.00 Ltr/0.5 ltr), Diesel filters and air filters inner and outer as recommended by OEM

320 KVA Capacity, Location : Hill Top

100 KVA Capacity, Location : Base

15 KVA Capacity, Location : Base

Supply only coolent, K cool super plus 50-50 Premix

Supply only Battery water with electrolyte mix

Supply only Engine oil 15 W 40 turbo synthetic superior quality engine oil

Supply only radiator hose pipe set with clamps suitable for DG set of capacity 15 KVA

Supply only radiator hose pipe set with clamps suitable for DG set of capacity 100 KVA

Supply only fan belt set suitable for 15 KVA

Supply only fan belt set suitable for 100 KVA

Supply only fan belt set suitable for 320 KVA

Supply & Fix in replacement of battery 12 V, 90 AH, maintenance free battery, 12 Volt initially charged with suitable size of copper leads and brass terminals complete as directed by Engr-in-Charge. Make: Excide/ Amron/ Luminous

Supply & Fix in replacement of battery 12 V, 60 AH, maintenance free battery, 12 Volt initially charged with suitable size of copper leads and brass terminals complete as directed by Engr-in-Charge. Make: Excide/ Amron/ Luminous

M & L for complete checking of AMF panel, finding the fault, servicing complete including replacement of unserviceable spares with necessary wiring and testing complete for manual & Auto operations all as directed. (Note:- Items required for replacement are deemed to be included in the quoted rate

Repair to charging alternator assembly including replacement of carbon brushes and bushes complete and refixing all the components in position with necessary screws, nuts & bolts complete all as directed.

M & L for leakage rectification of radiator, cleaning, pressure testing complete as required and directed.

M & L for servicing of split type AC of capacity 1.5/2.0 TR of any by opening the outdoor unit fixed on roof top and Indoor unit fixed inside the building, and cleaning the complete outdoor unit and indoor unit including fins, checking of refrigerant standing pressure, topping of refrigerant upto the required level, complete all as directed by Engineer-in-Charge. Note : Refrigerant required for topping (R22 / R-32/R-134/ R410(a) shall be maesured and paid for separately as "supply only rates" under respective item of BOQ here-in-after

Supply only of Refrigerant gas R 22/ R-134/ R-410(a) in cylender complete all as specified and directed

S&F in replacement of Blade for condensing fan motor of split AC capacity 1.5/2.0 TR

S&F in replacement of blower of indoor unit of split AC capacity 1.5/2.0 TR

S&F in replacement of condensor fan moter of split type AC suitable for 1.5/2.0 Ton capacity of make Carrier / Hitachi / Voltage / Blue star, complete all as specified and directed.

S&F in replacement of blower fan moter of split type AC suitable for 1.5/2.0 Ton capacity of make Carrier / Hitachi / Voltage / Blue star, complete all as specified and directed.

S&F in replacement of rotery Compressor (Sealed Unit) of window / split type AC 2 TR capacity, single phase, 220 volt of make Kirloskar / Tecumseh / Carrier/Voltas including necessary modification of foudation as required to suit the compressor, vacumisation, pressure testing, leakage rectification including gas charging R-22/134 & testing complete complete all as specified and directed.

S&F in replacement of rotery sealed Compressor (Sealed Unit) of window / split type AC 1.5 TR capacity, single phase, 220 volt of make Kirloskar / Tecumseh / Carrier/voltas including necessary modification of foudation as required to suit the compressor, vacumisation, pressure testing, leakage rectification including gas charging R-22/134 & testing complete all as specified and directed.

S & F in replacement of wiring kit of split type AC complete with lugs, thimble complete all as directed.

S & F in replacement of Running Capacitor 45/50 Mfd all as specified and directed.

S & F in replacement of Running Capacitor 6 Mfd all as specified and directed.

S & F in replacement of Running Capacitor 2.5 Mfd all as specified and directed.

S & F in replacement of Running Capacitor 4 Mfd all as specified and directed.

S & F in replacement of Running Capacitor 1.5 Mfd all as specified and directed.

S & F in replacement of Running Capacitor 2 Mfd all as specified and directed.

S & F in replacement of Running Capacitor 3 Mfd all as specified and directed.

S & F in repairs PCB unit of split AC indoor unit of Capacity 1.5/2 TR as per existing make and model, removing old PCB sensor and refix with new PCB of same make & capacity and model in the same position complete all as directed by Engr in Charge.

S & F in replacement of plug and socket outlet industrial type 250 Volts with MCB SP 20 AMP complete all as specified and directed.

Material and labour for cleaning and painting to old steel surfaces of Desert cooler with two coats of synthetic enamel spray paint over one coat of red oxide on external surface & two coats of anti corrosive black paint inside the Body tank & side grills over a coat of Red Oxide primer including scraping/rubbing with wire brush on old surface of Desert cooler. and writing of MES NO etc complete all as specified and directed.

S&F in replacement Desert Cooler fan motor kit inlcuding steel blades of same make of capacity 200 Watt, speed, 1400 RPM single phase complete all as specified and directed. Cromption model No 500MMCKM-Mark1 and equivalent in Khaitan/Havells

S&F in replacement of water lift submersible pump plastic body of 18 Watts 220-240 Volts AC Supply single phase complete all as directed by Ein- Charge .

S&F in replacement of wood wool pad (set of three), minimum weight 0.60 Kg, fixed in side panels of desert coolers including GI wire mesh of 20 gauge wire and mesh size 100x100mm complete all as specified and directed.

S&F in replacement side penal (shutter) made out of 20 gauge PGI Sheet with suitable hand grip,and supporting jali of wood/wool chips pad set made out of hard MS wire and fitted in side louvers including painting to match with the existing desert cooler complete.

S&F in replacement of 20mm size of Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed including nipple and fixing accessories complete all as specified and directed.

S&F in replacement of 5 A switch piano type suitable for submersible pump of capacity 40Watt for desert cooler all as specified and directed.

Supply and fix in replacement of copper condensing coil for split AC 1.5/2.0 Ton as per existing make and model complete all as specified and directed

Taking down u/s perished point wiring any type for light/fan/socket/power complete including making good the disturbed surfaces complete all as specified and as directed

Material and labour for point wiring complete with 1.5 sqmm single core multistandard copper conductor fire resistant low smoke and low halogen (FRLS) PVC insulated and unsheathed cable 1100 Volts grade conforming to IS-694 drawn through non metallic rigid PVC heavy duty conduit in concealed (min 20mm dia (external) but shall be increased as per actual site requirement in accordance with clause No 19.125 of SSR Part I) ISI marked with wall thickness not less than 1.8mm including conduit accessories like bends, tees, junction boxes etx fixed concealed/recessed in wall or ceiling etc including 1.5mm FRLS PVC insulated unsheathed copper earth wire including sunken type pressed steel terminal boxes electro plated of suitable size with bakelite white/colored top sheet cover 3.0mm thick for :-

One light point controlled by one way switch.

One Ceiling Fan/Wall Mounted Fan/Exhaust Fan Point controlled by one way switch

One 3 pin 6 Amps socket outlet on same board

One 3 pin 6 Amps switch socket out on indipendent board

All as per tem Sl No-64 but with two run of 2.5 sqmm single core multistranded copper conductor for phase and neutral, and one 2.5 sqmm single core multistranded copper conductor for earth contunity conductor.

M&L Socket 6 Amp 2/3 pin combined 2 module complete all as specified and directed.

M&L in replacement of switch 5 Amp piano flush type single pole one way complete all as specified and directed.

M&L in replacement of switch socket combination flush type 5 Amps, 2/3 pin multipurpose complete all as specified and directed.

M&L in replacement of Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings

M&L for replacement of LED lamp 9 Watt more than 120 lumen per watt efficiency complete all as specified and directed. Make : Havells/Crompton/Syska/Orient

M&L in replacement of switch/socket combination outlet 2 in 1, 3 pin 5 Amps and 15 Amp flush type (Multi purpose) piano type AC 230 Volts.

M&L in replacement of stepped type electronic fan regulator flush type on the existing phenolic laminated sheet, etc as required complete all as specified and directed.

M&L in replacement of ceiling rose three terminal AC 230 volts complete all as specified.

S&F in replacement of Modular switch 1 way 6A, 1 module complete all as specified and directed. Make : Legrand/Phillips/Havells

S&F in replacement of Modular white cover plate with frame 6 module complete all as specified and directed. Make : Legrand/Phillips/Havells

S&F in replacement of Modular white cover plate with frame 2 module complete all as specified and directed. Make : Legrand/Phillips/Havells

S&F in replacement of Metal flush box 2 module complete all as specified and directed. Make : Legrand/Phillips/Havells

S&F in replacement of Metal flush box 6 module complete all as specified and directed. Make : Legrand/Phillips/Havells

M&L in replacement of LED tube light fitting 1 x 20w, 230v including LED (tube rod), 4 feet batten fitting fixtures, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size, complete all as specified and directed.

M&L in replacement of LED tube light fitting 1 x 10w, 230v including LED (tube rod), 2 feet decorative ultra slim LED fixture with high lumen output, environment friendly energy efficient complete with all accessoires pre wired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed.

M&L in replacement of LED tube rod 20w, 230v 4 feet complete all as specified and directed.

Taking down ceiling fan of any make & sweep by disconnecting clips, lock nuts etc. from existing position of any height in safe custody for repair & maintenance, complete all as specified and directed. (Note :- Repair & maintenance shall be paid saperately under relevant items)

Hanging only ceiling fan 1200mm/1400mm sweep after repair & maintenance with existing down rod, shackle, canopy, clips, lock nuts etc complete all as speficied and directed.

M&L for painting of ceiling fan complete, in situ/lying in store with synthetic enamel paint (white colour) by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and directed.

M&L for removing of old burnt winding wire of fan any type and rewinding the stator with suprior quality super enamelled copper wire of suitable size including insulation, drying after varnishing complete all as specified and directed.

S&F in replacement of bearing for ceiling fan 1200mm/1400mm sweep ISI marked complete all as specified and directed. NBC/SKF or equivalent

S&F in replacement of gun metal bush for ceiling fan 1200mm/1400mm sweep complete all as specified and directed.

S&F in replacement of rubber shackle and split pin with galvanised clamp complete with nuts, bolts and washers complete all as specified and directed

Taking down exhaust fan of any make & sweep and size from existing position of any height for repair, maintenance and refixing the same after necessary repair complete all as directed. Note : The defective parts to be replaced and shall be measured and paid separately under relevant item of Sch. (ii) cost of minor items i.e., Screws, nut & bolts etc shall be deemed to be included in the above item.

S&F in repair ball bearing (ISI mariked) for exaust fan of 450mm sweep capacities

S&F in repair ball bearing (ISI mariked) for exaust fan of 300/380mm sweep capacities

M&L for removing of old burnt winding of exhaust fan 450mm sweep motor and rewinding the same with superior quality super enamelled copper wire of suitable size including insulation, drying after varnishing complete all as directed and specified aby Engr-in-Charge. Note : Cost of dismentling all components of exhaust fan, greasing, re-assembling and complete testing shall be included in the quoted rate.

M&L for removing of old burnt winding of exhaust fan 300/380mm sweep motor and rewinding the same with superior quality super enamelled copper wire of suitable size including insulation, drying after varnishing complete all as directed and specified aby Engr-in-Charge. Note : Cost of dismentling all components of exhaust fan, greasing, re-assembling and complete testing shall be included in the quoted rate.

M&L for removing of old burnt winding of flame proof exhaust fan 450mm sweep motor and rewinding the same with superior quality super enamelled copper wire of suitable size including insulation, drying after varnishing complete all as directed and specified aby Engr-in-Charge. Note : Cost of dismentling all components of exhaust fan, greasing, re-assembling and complete testing shall be included in the quoted rate.

S&F in repairs of capacitors 3.15mfd ISI marked complete all as directed.

S&F in repairs of capacitors 4 mfd ISI marked complete all as directed.

Supply and fixing in replacement MCB SP, 6 to 32 Amps 10 KA single pole AC 230 volts 'B' curve complete all as specified

Supply and fixing in replacement MCB SPN 6 to 40 Amps 10 KA AC 230 volts 'B' curve complete all as specified

Supply and fixing in replacement MCB TPN 63 Amps 10 KA AC 230 volts 'B' curve complete all as specified

S/F in replacement of Sheet metal enclosures for fixing MCBs Single pole and neutral 8 way, 240 volts with 200 Amps rated bus bar with double door fixed on flush to the wall including making the hole in the wall and fixing the DB including cement work and plastering complete all as directedMake: C&S,LEGRANDSor equivalent

S/F in replacement of Sheet metal enclosures for fixing MCBs TPN 4 way, 240 volts withe 200 Amps rated bus bar withe double door fixed on flush to thee wall including making the hole in the wall and fixing thee DB including cement work and plastering complete all as directed Make: C&S,LEGRANDS or equivalent

M/L in replacement of submain wiring with 3 runs of 4.0 sqmm single core FRLS PVC insulated stranded copper conductor cable drawn through rigid non metallic PVC conduit with one run of 4.0 Sqmm PVC insulated copper conductor cable as earth continuity conductor and necessary connections all as directed. Note : 3 runs of 4 sqmm FRLS PVC insulated unsheathed copper conductor PVC insulated unsheathed copper conductor and 1 run of PVC conduit of size 20 mm will be measured as single run

M&L in replacement of Earthing complete with 600x600x6.00MM thick GI earth plate electrode burried directly in ground not less than 2.25 mtr below GL with the top edge of the plate at a depth not less than 1.5 mtr from GL, connected to GI earth lead wire of 4.0 mm dia by means of nuts, bolts, washers, checknuts etc, made out of galvanised iron or steel, earth wire protected by galvanised iron pipe 15mm dia, connected to main switch board complete including necessary earth work,excavation,PCC chamber, watering pipe, funnel, wiremesh, RCC chamber cover etc all as specified and directed.

M & L in replacement of Earthing complete with copper earth electrode 60×60cm ×3.00mm burried directly in ground vertically to depth not less than 2.25 m below normal ground level with top edge of the earth plate at a depth not less than 1.5 m below ground level connected to and including copper strip of size 20x3 mm by means of nut, bolt, check nut and washer etc made of copper alloy and connection to test point and earth dolly all as shown in electrical plate No. 3 SSR Part I 2009 and specified or indicated including excavation and earth work in any type of soil, (in any type of strata ) PCC (1:3:6) type C-1 in chamber, precast 50 mm thick in cement concrete (1:2:4) type B-1 with CI frame, funnel, GI Pipe 20 mm bore medium grade for watering and 40 mm bore GI Pipe middium grade for protection and test point complete Note:-(i) Copper strip 20 x 3 mm with GI pipe upto 7.5 mtr length shall be deemed to include in this items rate. (ii) On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost by the contractor.

M&L Socket 6/16 Amp 2/3 pin combined 2 module complete all as specified and directed.

Supply and fix in replacement of FLP/WP switch 16 Amp, 250V single pole ON/OFF rotary type with termination box in LM6 all as specified and directed by Engr-in-Charge.

Material and labour for repair of fire alarm panel to include burnt transformer, Ics, multi chips etc complete all as specified and directed.

Supplying, fixing and testing in replacement of Gate top light 24x0.5 W decorative LED post top warm white of Jaquar model Orbiss Gate Top or equivalent in Philips / Osram including taking down old u/s post top lantern any type complete all as specified and directed.

M&L for brazing of existing aluminium / copper strip including fixing of stainless steel nut, bolts & washers complete all as specified and directed.

S&F in repairs of capacitors 2.5 mfd ISI marked complete all as directed.

Supply and lay in replacement of steel water tubing GI medium grade ISI marked with all fittings laid in trenches, air/vertical on hill to be fixed with MS clamp of size 50x6mm and using nut bolts & washers etc complete for the following sizes including taking out old uerviceable pipe lines all as directed by Engr-in-Charge :-

25 mm bore

40 mm bore

50 mm bore

Supply and fix in replacement of Gun - metal, globe or gate valve ISI marked with iron wheel head, screwed at both ends for iron pipes and fixed with suitable size of union for the following sizes including taking out old uerviceable gate valves all as directed by Engr-in-Charge :- :-

25 mm dia bore

40 mm dia bore

50 mm dia bore

Repair and servicing of RO water plant 150 ltr per hr installed in ORs Mess with the following works :- (a) Replace the UV filter with assembly. (b) Dismantling of RO unit and cleaning RO water storage tank, removing inlet/outlet pipe line and replace the Chemical tube complete servising and cleaning the unit all as airby Engr-in- charge (c) Replacement of RO membrain. (d) Replacement of unsv motors of RO plant Note :- Cost of unserviceable spare parts deemed to be included in quoted rates

Repair and servising of RO water plant 150 ltr per hr installed in hill top Ops Room with the following works :- (a) Replace the UV filter with assembly. (b) Dismantling of RO unit and cleaning RO water storage tank, removing inlet/outlet pipe line and replace the Chemical tube complete servicing and cleaning the unit all as directed by Engr-in- charge (c) Replacement of RO membrain. (d) Replacement of unsv motors of RO plant Note :- Cost of unserviceable spare parts deemed to be included in quoted rates

M& L for testing of water of 02 x Borewells for potability and biological analysis etc from the specified lab complete all as specified and directed.

M&L repairing of Submersible pump set with multi stage, electric driven 415 volt,50Hz capacity 5 HP including taking up from borewell with column pipe and lowering down by using of tripod/lowring machine with chain pulley complete all as specified and directed. (a) Transportation of burnt motor to civil electric work shop. (b) Dismantling of motor, cutting and taking out burnt stator winding from motor cleaning the stator and rewinding with super enameled copper wire of original gauge / size with suitable for submersible motor, including tapping, Motor end shield, shaft sheild assembling and carrying to site including necessary connection, commissioning and testing on full load (Major spare parts will be measured and paid separately under respective items) (c) The nuts bolts/rubber gasket of column pipe will be replaced by new one. Note :- (i)Cost of minor spare parts deemed to have been included the quoted rates by the tenderer

S&F in replacement of following under mentioned worn out U/S parts of submersible pump set 5 HP for bore well complete all as specified and directed.

Bearing of suitable size

Strainer

Shaft seal

M&L repairing of Submersible pump set multi stage, electric driven 415 volt,50Hz capacity 10 HP including taking up from Under Ground borewell and refixing the same after repair by using tripad/ lowring machin with chain pulley Note: (a) Transportation of burnt motor to civil electric work shop. (b) Dismantling of motor, cutting and taking out burnt stator winding from motor cleaning the stator and rewinding with super enameled copper wire of original gaug suitable for submersible motor end shield, shaft sheild assembling and carrying to site including necessary connection, commissioning and testing on full load (Major spare parts will be measured and paid separately under respective items) Note :- The above quoted rates inclusive the cost of minor spare parts.

Supply and fixing in replacement of following under mentioned worn out U/S parts of submersible pump set 10 HP for UG sump all as directed.

Bearing of suitable size

Strainer

Shaft seal

M&L for valve pit chamber of size 1000x1000x1000 mm (internal) with PCC blick sasonary valve chamber, PCC foundation, plastering and necessary earth work in hard/dense soil, MS sheet cover 3.15mm thick alongwith angle iron frame of size 40x40x6mm with locking arangement, handle with necessary fixing materials like hinges, nut/bolts etc (valve chamber cover shall be opened in two halves) and painting to MS cover with one coat of red oxide and two coats of synthetic enamel paint etc complete all as specified and directed.

M&L repairing of Submersible pump set multi stage, electric driven 415 volt,50Hz capacity 20 HP including taking up from Under Ground sump and refixing the same after repair by using tripad/ lowring machin ewith chain pulley Note: (a) Transportation of burnt motor to civil electric work shop. (b) Dismantling of motor, cutting and taking out burnt stator winding from motor cleaning the stator and rewinding with super enameled copper wire of original gaug suitable for submersible moto,r end shield, shaft sheild assembling and carrying to site including necessary connection, commissioning and testing on full load (Major spare parts will be measured and paid separately under respective items) Note :- The above quoted rates inclusive the cost of minor spare parts.

Supply and fixing in replacement of following under mentioned worn out U/S parts of submersible pump set 20 HP for UG sump all as directed.

Bearing of suitable size

Strainer

Shaft seal

S&F in replacement of Outdoor type double door front and rear openable AMF panel made out of 3.15mm thick CRCA sheet powder coated comprising of incoming MCCB 4 Pole-02 Nos + 4 pole contractors - 02 Nos, auto changeover and manual changeover for bypass arrangement with operating relays, Outgoing MCCB 4P-01 No complete wiring including Digital multifunctional meter for measurement of Amp, Voltage, frequency & energy for the three phase supply complete with battery charger for DG Set suitable for DG Set of Capacity 100 KVA including connecting with existing electrical system testing and commissioning complete all as specified and directed by Engr-in-Charge.

Material and labour for repair of Diesel pump 6 HP to include replacement of valves, rings, engine oil, wheel bearings etc and testing complete all as specified and directed.

M&L for unlowering and lowering of Submersible pump set multi stage, electric driven 415 volt,50Hz capacity 5 HP including pipes complete by using tripad/ lowring machin with chain pulley etc complete all as specified and directed.

Supply and lowering of MS Pipes heavy grade 50mm dia with all fittings in borewell for reinstallation of submersible pump complete in replacement of GI pipe 50mm dia complete all as specfied and directed.

Supply and fixing Cross arms, bracings, supports, clamps and back plates fabricated from MS Sheet sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint

Cleaning of semi-UG sump of capacity 50000 ltrs, dewatering the tank below the suction pipe with submersible pump with suitable arrangements, desilting and removing of left obver water from bottom, cleaning tank surfaces by using bleaching powder approx 30 Kg and remove all foreign materials and clean with plain water and then after cleaning making white wash of the inner surface with the lime complete all as directed by the Engr-in-Charge. Note : (i) The job shall be completed within 08 hrs to avoid any interruption in distribution of water supply. (ii) The date of cleaning and due date should be written legible on the surface of the tank/sump as per existing old colour and font size.

Cleaning of semi-UG sump of capacity 20000 ltrs, dewatering the tank below the suction pipe with submersible pump with suitable arrangements, desilting and removing of left obver water from bottom, cleaning tank surfaces by using bleaching powder approx 25 Kg and remove all foreign materials and clean with plain water and then after cleaning making white wash of the inner surface with the lime complete all as directed by the Engr-in-Charge. Note : (i) The job shall be completed within 08 hrs to avoid any interruption in distribution of water supply. (ii) The date of cleaning and due date should be written legible on the surface of the tank/sump as per existing old colour and font size.

Cleaning of semi-UG sump of capacity 15000 ltrs, dewatering the tank below the suction pipe with submersible pump with suitable arrangements, desilting and removing of left obver water from bottom, cleaning tank surfaces by using bleaching powder approx 20 Kg and remove all foreign materials and clean with plain water and then after cleaning making white wash of the inner surface with the lime complete all as directed by the Engr-in-Charge. Note : (i) The job shall be completed within 08 hrs to avoid any interruption in distribution of water supply. (ii) The date of cleaning and due date should be written legible on the surface of the tank/sump as per existing old colour and font size.

M&L for disconnecting LT connections of defective voltage stabilizer of 100 KVA capacity, taking out with the help of crane and transporting voltage stabilizer to factory for repair & back after repairing to site including connecting, LT connection earth connecting leads, testing and commissioning at site all as directed. Note : (i) Rate quoted shall be inclusive of taking out and reinstallaing after repair of voltage stabilizer with the help of crane, including transportation to workshop and back including handling. (ii) U/S wornout items required replacement shall be measured and paid for separately under respective item of BOQ.

M&L for replacement of micro switch of existing stabilizer of any make and capacity complete all as specified and directed.

M&L for replacement of carbon bushes of existing stabilizer of any make and capacity complete all as specified and directed.

M&L in replacement of control panel switch

M&L in replacement of indicator lamp suitable for stabilizer complete all as directed.

MIL in replacement of control card suitable for existing stabilizer of any capacity complete all as directed.

M&L in replacement of CM torque motor for rotating of dimmer as per existing capacity and make for servo voltage stabilizer complete all as directed.

M&L in replacement of relay of voltage stabilizer as per existing capacity and make.

Material and labour for opening of top cover of voltage stabilizer, removal of burnt dimmer windings of any capacity, rewinding the dimmer with new super enameled copper wire of original gauge suitable for capacity of dimmer and refixing the same in existing position and testing complete all as specified and directed.

S&F onload Changeover switch 4 pole 160 Amp without enclosure in the feeder piller complete all as specified and directed.

M&L for painting on indoor type voltage stabilizer 100 KVA capacity, with removing rust by wire bushes, applying painting on outer surface by using synthetic enamel paint of two coats by using spray gun after preparation of old painted surfaces and writing MES No complete all as directed.

M&L for taking down water piping connection, descalling of solar water heater by applying descalling solution and reconnecting the water piping connection complete all as specified and directed.

Supply and fixing in replacement of 2 KW heating elements for solar water heater complete all as specified and directed.

S&F in replacement of MCB SP 6 Amp 10 KA, B Curve complete all as specified and directed.

S&F in replacement of 1 kVAr Resin Heavy duty 440 volts capacitor can type complete all as specified and directed.

S&F in replacement of 2 kVAr Resin Heavy duty 440 volts capacitor can type complete all as specified and directed.

S&F in replacement of 5 kVAr Resin Heavy duty 440 volts capacitor can type complete all as specified and directed.

S&F in replacement of 7.5 kVAr Resin Heavy duty 440 volts capacitor can type complete all as specified and directed.

S&F in replacement of 10 kVAr Resin Heavy duty 440 volts capacitor can type complete all as specified and directed.

S&F in replacement of 12.5 kVAr Resin Heavy duty 440 volts capacitor can type complete all as specified and directed.

Supply and installation in replacement of Heavy duty Chemical Dozing system plunger type suitable to iject solution upto 25 LPH working pressure 10 Kg/cm2 comprising dozing pump coupled with three three phase electric motor of capacity 0.5 HP, 1440 RPM assembly with agitator in one motor, agitator with SS sweep blade duly FRP coated, FRP tank 150 ltrs capacity, complete unit mounted on heavy duty MS fabricated frame duly anticorrosive paint complete with Chemical grade PVC NRV, alongwith Control panel for Dosing PUmp suitable for Model SSAPS/CDSPT/25 made of powder coated MS fabricated box consisting of LED indicator, digital volt meter, amp meter, single phase preventor, high voltage low voltage protection. Make : Sathya Sai model No SSAPS/CDSPT/25/ST or equivalent in Sathya sai aqua pure services

Supply and fixing stainless steel nut bolts and washers made of Stainless steel sheet SS-304 complete all as specified and directed

Material and labour for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed.

Material and labour for Cement concrete in foundations, filling and mass concrete 1:3:6 on stone masonary blocks for fixing arrangement of GI pipe Clamps etc complete all as specified and directed.

Removing the unserviceable/worn out components without damaging the existing components supply & fix new components given below. The new components shall be made out of 1st class hard wood (Indian teak wood) duly french polished to match the existing components as shown in drawing of following items in quarters/Messes, unit line , area of MES furniture yard etc complete all as specified. All as per item No.157.00 above but CHAIR DINING for the following items : Drg No:FD- 279

Front legs with PVC shoes

Rear legs with PVC shoes

Back rest

Stiffener (Side)

Stiffener (Centre)

Side rail of seat frame

Rear rail of seat frame

Front rail of seat frame

Material and labour for recanning of Chair dining with new vergin quality plastic cane of size 2mm wide white for weaving and 4mm wide plastic cane for borders as per Godrej pattern after removing the existing unserviceable cane all as specified and as directed by engr-in-charge.

M & L Preparation of polished wooden surfaces by sand paper & applying one coat of french polish on exposed surfaces .

All as per item No.157.00 above but Chair writing for following items :- Drg No: FD-250, 280

Front legs with PVC shoes

Rear legs with PVC shoes

Back rest

Stiffener (Side)

Stiffiner(Centre)

Side rail of seat frame

Rear rail of seat frame

Front rail of seat frame

Hand rest

Material and labour for recanning of Chair writing with new vergin quality plastic cane of size 2mm wide white for weaving and 4mm wide plastic cane for borders as per Godrej pattern after removing the existing unserviceable cane all as specified and as directed by engr-in-charge.

M & L Preparation of polished wooden surfaces by sand paper & applying one coat of french polish on exposed surfaces .

All as per item No.157.00 above but CHAIR EASY for the following items :- Drg No: FD- 229

Side rail of seat frame

Rear rail of seat frame

Front rail of seat frame

Front leg with PVC shoes

Rear leg with PVC shoes

Back rest side rail

Back rest upper/lower rail

Arm rest

Material and labour for recanning of Chair Easy plastic with new vergin quality plastic cane of size 2mm wide white for weaving and 4mm wide plastic cane for borders as per Godrej pattern after removing the existing unserviceable cane all as specified and as directed by engr-in-charge.

M & L Preparation of polished wooden surfaces by sand paper & applying one coat of french polish on exposed surfaces .

Devi Engineeing

GITANSH ENGINEERS AND COMPANY