Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.9 LAccepted-AOC 23 24 RADHA BAZAR STREET KOLKATA 700 001 | KOLKATA | KOLKATA | WEST BENGAL | 700001 | L1 | Accepted-AOC Lowest Rate | |
| 2 | L2₹20.0 L+₹10,352 (0.52%)Rejected-Finance FD 85 SALT LAKE CITY SECTOR III KOLKATA 700 091 W B | 24 PARAGANAS NORTH | WEST BENGAL | 700091 | L2 | Rejected-Finance Higher than L1 | |
| 3 | L3₹20.1 L+₹13,538 (0.68%)Rejected-Finance 138 CANNING STREET GROUND FLOOR KOLKATA | KOLKATA | WEST BENGAL | L3 | Rejected-Finance Higher than L1 | |
| 4 | L4₹20.1 L+₹22,240 (1.12%)Rejected-Finance | L4 | Rejected-Finance Higher than L1 |
Tender Value
Refer Docs
EMD Value
₹41,960
Closing Date
12 Dec 2022, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
The Executive Engineer
Raghunathpur, Jhargram.
WBPHE/EE/JMD/NIeT 19_1 OF 2022-2023
2022_PHED_423416_1
WBPHE/EE/JMD/NIeT 19 OF 2022-2023
Open Tender
Miscellaneous Works
Item Rate
30 days
Jhargram
Please refer Tender documents.
4 documents required · 4 mandatory
₹41,960
Yes
10 Jan 2023
22 Nov 2022
15 Dec 2022
22 Nov 2022
12 Dec 2022
23 Nov 2022
Amount
Dismantling and taken out all existing pipelines, damaged cables, wires, nipples, valves etc. from the chlorine room by hiring expert mechanic, technician, required nos. of skilled & unskilled labours by maintaining necessary safety measures all complete as per direction of E.I.C
Vacuum Regulator (wall / Cylinder Mounted) with auto switchover facility, Capacity - (0-4) Kg/hr max. (1 set contains 2 nos.) Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
S10K Scale Controller having capacity of 50 gm/hr to 1 kg/hr. scale with Manual Control. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
¾’’ injector suitable for 40 PSI back pressure. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
Liquid trap with isolation Valve. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
5/16" x 18 SWG ,1.5 mtr. long flexible annealed cadmium plated copper coil with suitable end connection.
Pressure indicator 0-16 Kg (Gas-Line) (Diaphragm) Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
Yoke Clamp with isolation Valve.
15 mm NB-CS sch-80 ASTM A-106 Gr. B Chlorine Gas pipe
15 mm NB sch-80 Elbow.
15 mm NB-CS sch-80 UPVC TEE
15 mm X 20mm NPT-CS sch-80 ASTM A-106 Gr. B CS Adopter.
Header line Isolation Valve.
25 mm sch-80 UPVC pipe conforming to ASTMD-1785. Make: Supreme/Astral/other approved make.
25 mm sch-80 UPVC Flange conforming to ASTMD-1785. Make: Supreme/Astral/other approved make.
25 mm sch-80 UPVC Elbow conforming to ASTMD-1785. Make: Supreme/Astral/other approved make.
25 mm sch-80 UPVC Tee conforming to ASTMD-1785. Make: Supreme/Astral/other approved make.
16 mm sch-80 UPVC pipe conforming to ASTMD-1785. Make: Supreme/Astral/other approved make.
16 mm Ball Valve (union type) Make: supreme/Oriplast/other approved make.
25 mm PVC NRV. Make: CPI/Ashirbad/other approved make.
16 mm sch-80 UPVC Elbow conforming to ASTMD-1785. Make: Supreme/Astral/other approved make.
15 mm sch-80 UPVC Tee conforming to ASTMD-1785. Make: Supreme/Astral/other approved make.
16 mm sch-80 UPVC union conforming to ASTMD-1785. Make: Supreme/Astral/other approved make.
16 mm sch-80 UPVC Long-Screw conforming to ASTMD-1785. Make: Supreme/Astral/other approved make.(150mm)
15 mm X 5/8’’ P.V.C Bush. Make: Supreme/Astral/other approved make.
1/2" X 5/8’’ Tubing Connecter.(Evoqua) Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
380 mm sweep specially designed metal blade Exhaust fan having powder coated long lasting finish with sturdy steel bird guard protection. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
Ammonia torch.
Canister type gas mask
100 kg capacity liquid chlorine filled baby cylinders of technical grade, industrial type including tested safety valve & accessories confirming to IS 7681 ; 1975 & duly certified & tested by the department of explosive & petrochemical industries, Govt. of India. N B: 1. All the T/C & warranty certificate are to be supplied before delivery. 2. First filling of liquid chlorine in the baby cylinder shall be done by agency.
415 volt , 2 mm thickness CRCA sheet enclosed ,IP 54 protection with PDB cum MCC panel having 63A incomer, three nos. of DOL starters (2 W+1 S) for running of chlorine pumps and other required feeders as per attached detailed technical specifications. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
LED street light luminarie IP 66 LM6-HPDC Housing Street light aerodynamically designed with better thermal management/ Potted driver is to be provided,the luminaire and housing should be from the same manufacturer(cat no- BRP052 LED 045 CW SLMR FG S1 PSU GR ,System Efficacy greater than 100 lumen/watt) Make-Philips OR Equivalent and same techinal specification of Havells.The manufacturer has to provide LM79/LM80 reports corresponding to the luminaire/LED Chip along with type test Certificate.Respectively the luminaire manufacturer should have an in house NABL Accredited testing facility.
240 V/415 V, 50 Hz, 63 Amp four pole MCB isolator with enclosure having AC-22 A, in accordance with IS/IEC 60947-3. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
6-32 Amp,10 kA, 240/415V, 50 Hz SP MCB conforming to IS / IEC: 60898-1, "C" characteristics. (6 Amp- 1 no., 16 Amp- 1 no.) Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019.
10 Amp, 10 kA, 240/415V, 50 Hz, SPN MCB conforming to IS / IEC: 60898-1, "C" characteristics. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019.
6 way SP&N Double Door horizontal Distribution Board (I/C 2 + O/C 4) conforming to IS 13032 & IS 8623 and IP42/43. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019.
1.1 KV grade 4 core, 10 sq.mm XLPE insulated armoured Al cable from main PDB panel to incomer of supplied chlorine panel. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments. Cable shall be procured as per site requirement.
1.1 KV grade 3 core, 4 sq.mm XLPE insulated armoured Al cable from installed panel to chlorine motor. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments. Cable shall be procured as per site requirement.
Installation of the above supplied item:- Installation of all supplied items (as in item no. 2 to 26) at desired position inside/outside of chlorine room to complete the gaseous chlorination arrangement by hiring expert Mechanic, technician, required nos. of skilled & unskilled labours and supply,fitting-fixing of required nos. of nuts, bolts, washers etc. as per entire satisfaction of E.I.C. This also includes the cost of fitting-fixing of supplied PDB cum MCC panel (as in item no. 31) on flat/angle iron frame at suitable position on wall by means of nuts, bolts, washers etc. with necessary earthing from nearest earth grid by S&F of 20 mm x 3 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles all complete.
Installation of the above panel board on wall at proper location inside the pump house by supplying and fitting fixing of required nos. of angle, fastners, nuts-bolts-washers in the wall with cement plaster complete and making double earthing arrangement by drawing suitable length 8 SWG G.I. wire from earth bus this also include the cost of Installation of the Isolator (as in item no.33), Distribution board (as in item no. 36 including item no.34,35) at desired position on wall of existing chlorine room by supplying required fixing materials all complete as per direction of E.I.C. This also includes the cost of fitting-fixing of supplied MCB within DB and interconnection by means of 2 x 36/0.3 (2.5 sqmm) stranded 'FRLSH' PVC insulated & unsheathed copper wire all complete as per entire satisfaction of E.I.C.
Making internal wiring/electrification of the chlorine room by (2x 22/0.3 (1.5 sqmm) + 1x 22/0.3 (1.5 sqmm) as ECC) single core PVC insulated multistrand FRLSH Grade flexible copper wire through 20 mm PVC conduit pipe/casing by supplying one no. 40 Amp, 10kA, 240/415V,50 Hz SPN/DP MCB Isolator conforming to IS / IEC: 60947-3, "C" characteristics. (As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019) with required module PVC Board & piano key type switch. (ave. run 6 mtr). i) LED Tube set point-2 nos., Bracket light - 1 no., Bulk Head light point- 1 no., 5 pin 6 Amps. Plug point- 1 no. ,16Amp switch & socket -1no,LED indicator-1no. with necessary Earthing arrangement, 2 nos. exhaust fan point (total point 9 nos. with one plug point) including drawing power by suitable gauge (2.5 mm2) of copper wire from installed cut-out to SPN/DP MCB within DB through 20 mm PVC casing capping (precision make) as per direction of EIC (fittings should be of Philips make & wiring should be with continuous earthing arrangement and 20W one no. 4 ft long LED tube light sets PHILIPS Astra Line, one no. bulk head (Endura WT202W LED6S NW PSU S2 PC), one no. 0-4 step fan regulator (Humfree), fittings etc to be supplied by agency). Connection of exhaust fans and other details shall be as per attached technical specification.
Laying of cable as in item no. 37 through existing covered masonry trench incl. taking out RC covers, setting them in order, mending good the damages filling the trench with fine dry sand incl. supplying sand all complete as per direction of E.I.C.
Laying of cable as in item no. 37 in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed all complete as per direction of E.I.C.
Laying of cable as in item no. 37 on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting all complete as per direction of E.I.C.
Laying of cable as in item no. 37 on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting all complete as per direction of E.I.C.
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : 4 Core 10 sq.mm as in item no. 37
3 Core 4 sq.mm as in item no. 38
Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 4 Core 10 sq.mm as in item no. 37
3 Core 4 sq.mm as in item no. 38
Earthing with 50 mm diameter G.I. pipe 3.64 mm thick x 3Mtr. (10ft.) long and 1 x 4 SWG G.I. wire (4Mtr.long) 13 mm diameter x 80mm (3inch) long G.I. Bolts, double nuts, washer including S & F of 15mm diameter G.I. pipe protection (1 Mtr. Long) to be filled with bitumen partly below ground level to an average depth of 3.65Mtr.(12ft.) below the ground level and restoring the surface duly rammed. i) For soft soil by ISI Medium GI pipe.
Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe.
Extra for treatment of soil by salt and charcoal coke for pipe electrode.
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.Length of busbar is 0.5 mtr.
Connecting the equipments body to earth busbar including S&F 20 mm x 3 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc. all complete as per direction of E.I.C.
S&F of 3" dia 1.5 mt minipole with baseplate to be fixed on rooftop incl. S&F of 1.5 mtr long arm bracket (removable type) incl. CC muffing (450X450X600) with 3mm. neat cement finish & painting incl. S&F 200x150x100 mm 16 SWG CI loop box including neccessery power connection by 3X22/.03 (1.5 Sqmm) (2 nos. Phase and Neutral and 1 no ECC) FRLS-H pvc insulated & unsheated copper wire (approved make) in 20 mm size PVC rigid conduit FRLS-H (precision Make) including necy. fittings as required as per direction of EIC. (for 12m length ) as directed by EIC.
Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter:38 cm(15")
Fixing only louver shutter/cowl on wall with necy. bolts & nuts (6 mm dia x 62 mm long) for 38 cm (15") Exhaust fan.
Add: 18% GST
Add: 1% CESS
ELECTRICAL AND MECHANICAL ENGINEERING CORPORATION
WEST BENGAL ENGINEERING CO.
UNIVERSAL ENTERPRISES
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .