Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.5 LAccepted-Finance | L1 | Accepted-Finance OK | |
| 2 | L2₹36.4 L+₹3.9 L (12.0%)Accepted-Finance E 138 VIJAY VIHAR PHASE 1 SECTOR 4 ROHINI DELHI 110085 | NORTH WEST | DELHI | 110085 | L2 | Accepted-Finance OK | |
| 3 | L3₹39.4 L+₹6.9 L (21.3%)Accepted-Finance | L3 | Accepted-Finance OK | |
| 4 | L4₹40.2 L+₹7.7 L (23.7%)Accepted-Finance | L4 | Accepted-Finance OK | |
| 5 | L5₹40.2 L+₹7.7 L (23.8%)Accepted-Finance | L5 | Accepted-Finance OK |
Tender Value
₹43.3 L
EMD Value
₹86,634
Closing Date
23 May 2026, 3:00 pmClosed
Executive Engineer, CBMD M321, PWD
Executive Engineer, CBMD M321, PWD, 1-A Battery Lane, Opposite Tirath Ram Shah Hospital, Delhi 110054
A/R and M/O to Delhi Vidhan Sabha during 2026-27. (SH Renovation of Various General Toilets at Delhi Vidhan Sabha.)
2026_PWD_291514_1
09/EE/CBMD M-321/2026-27 (R)
Open Tender
Civil Works - Buildings
Percentage
60 days
Delhi
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹86,634
23 May 2026
16 May 2026
23 May 2026
16 May 2026
23 May 2026
16 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | By Mechanical Transport including loading,unloading and stacking Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge.
Note - Item to be applicable in urban areas having directions for restricted hours for movement/plying of load carrying motor vehicle of 3.5 cum or more. | 65 | cum | 494.1 | ₹32,116.5 |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 12 | cum | 7,878.5 | ₹94,542 |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-Ill) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) | 12 | cum | 6,518.6 | ₹78,223.2 |
| 4 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite work | 156 | metre | 510.95 | ₹79,708.2 |
| 5 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood | 0.1 | cum | 1,42,949.7 | ₹14,294.97 |
| 6 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: Butt hinges and necessary screws shall be paid separately) Second class teak wood 35 mm thick shutters | 3 | sqm | 4,111.95 | ₹12,335.85 |
| 7 | Extra for providing frosted glass panes 4 mm thick (weight not less than 10 kg per sqm) instead of ordinary float glass panes 4 mm thick (weight not less than 10 kg per sqm) in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). | 2 | sqm | 176.4 | ₹352.8 |
| 8 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90 mm | 68 | each | 118.2 | ₹8,037.6 |
| 9 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. | 18 | each | 983.15 | ₹17,696.7 |
| 10 | Providing and laying Vitrified tiles in floor in diferent sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 1200 mm | 93 | sqm | 1,797.3 | ₹1,67,148.9 |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 12.87 MB
BOQ_386886.xls
BOQ • 0.47 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .