GE/863/EWS-T-57 OF 2025-26

Amount

Dismanling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Naintal or similar pattern roof coverings complete all as specified and directed

S & F steel work in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc confirming to I.S.1161- 1979 Fe 410-W (GdeE- 250) complete all as specified and as directed by Engineer-In-charge

S & F rolled mild steel in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. Within 20mm of the length indicated)conforming to Fe 410 -W (Gde- E- 250) quality-A complete all as specified.

S&F Pre-painting galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strenght of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed

S&F Pre-painting galvatume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strenght of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed

M & L for preparation of new steel surface any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of red oxide all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness inclduding cover fillets.

Dismantling timber scantlings 40 sq.cm and over in section, in any positions as in framed work.

-Ditto- all as per item above but in fillets, rails, posts, rafters, purlins, etc under 40 sq.cm in section.

M & L for second class hardwood clean sawn scantlings as in timber framed and fixed complete all as specified and directed.

Ditto all as per item above but except timber

M & L for second class hardwood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads of sectional area exc 3 & n.exc 6 sq.cm complete all as specified and directed.

M & L for second class hardwood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads of sectional area exc 13 & n.exc 25 sq.cm complete all as specified and directed.

M & L for 6mm thick (No of ply 5) plywood, grade BWR, type BB, fixed with nails to timber frame work as in ceiling complete all as specified and directed.

M & L for preparation of new wooden surface any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

M & L for preparation of new wood and wood based materials , new or old surface of any description and girth not otherwise described and treated with two coats of creosote oil all as specified and directed.

Taking down chowkats or frames not exc 1.5 sq.m each but with shutters (without taking off shutters from the frames).

Taking down chowkats or frames exc 1.5 sq.m but n.exc 4 sq.m each but with shutters (without taking off shutters from the frames).

S & F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

S & F of 35 mm thick (Batten thickness) 2nd class hardwood plain, framed panelled shutters (any numbers of panels) with panels of timber flat on both sides (feather edged) or od veneered particle board of medium density , wood particle board with commercial face veneers and fitted to chaukhats complete all as specified and directed.

S & F of 35 mm thick (Batten thickness) 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, with plain, chamfered or rounded, mitered and rebated sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule part – I (Specifications - 2009) complete all as specified and directed.

S & F of 30 mm thick (Batten thickness) 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares, with plain, chamfered or rounded, mitered and rebated sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule part – I (Specifications - 2009) complete all as specified and directed.

S & F clamps, hold fast,hook washer & similar small articles conforming to Fe-290 Gde-E-165.

M & L for providing cement concrete type C1 1:3:6 using 20mm graded stone aggregate as in hold fast blocks.

S & F 125mm butt hinges, medium weight, cold rolled mild steel and fixed.

-Ditto- all as per item above but 75mm long.

S & F 300mm length aluminium alloy, anodised, sliding door bolt hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.

S & F 150mm Aluminium handles, cast type, anodised

S & F 125mm Aluminium handles, cast type, anodised

S & F 150mm aluminium, anodised, barrel tower bolts of extruded section and fixed.

S & F 125mm aluminium, anodised, barrel tower bolts of extruded section and fixed.

S & F mild steel 300mm ordinary rat tail rod pattern springs, including roller and roller plate complete.

M & L sheet glass, 4mm thick ordinary quality and glazing with oil putty or beadings in square not exc 0.5 sqm in each pane.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and directed.

M &L 75mm thick cement concrete type C2 1:3:6 using 40mm graded stone aggregate finishing surface even and smooth wuthout using extra cement a in plinth protection all as specified and directed.

M &L 75mm thick cement concrete type D2 1:4:8 in sub base floor complete all as specified and directed.

M &L chequered cement concrete tile 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry over 20mm thick scrred bed in cement mortar 1 :4 as in floors with grey cement and pigment complete all as specified and directed.

M & L for non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceding 0.18 sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortar 1:6 etc set and jointed in neat cement slurry and pointed in coloured cement to match the surface of tile completed all as specified and directed by E-in-Charge.

M & L for glazed ceramic coloured tiles in vertical surface 300 x 200 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick screed bed in cement mortar 1:4.

Demolition of brick work or stone / boulder massonary, build in cement mortar incl all quoins , pillers etc.

M & L for Precast cement concrete block massonary 1:3:6 type C1 with solid block exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed by E-in Charge.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc.

M & L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement plaster 1:6 and finished even and smooth (without using extra cement).

M & L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement plaster 1:4and finished even and smooth (without using extra cement).

M & L complete removal of existing treatment and applying 3mm thick Birla wall care putty and applying two coats of distemper oil emulsion over a coat of primer on wall complete all as specified and directed.

M & L for preparation of new plastered surface or previously untreated walls surfaces and applying two coats of cement base paint over coat of primer on wall complete all as specified and directed.

M & L for joint free glazed ceramic coloured tiles in vertical surface 350 x 250 x 7mm / 450mmx350mmx7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick screed bed in cement mortar 1:4.

M & L sheet glass, 4.8mm thick ordinary quality and glazing with oil putty or beadings in square not exc 0.5 sqm in each pane

M & L for non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortar 1:4 completed all as specified and directed by E-in-charge.

Taking up or down 15mm bore steel water tubing & connections, incl cleaning for existing or offrening credit as per sch of credit all as directed.

S&F in repair bib taps 15mm dia fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed. complete all as specified and directed by Engr In Charge.

S&F in repair 15mm dia stop valve chromium plated, fancy type screwed down, high pressure with crutch or butterfly handle screwed both end for iron pipe complete all as specified and directed by Engr In Charge.

S&F in repair PVC connections 45cm long and 15mm dia chromium plated brass nuts and PVC washers on both ends, complete all as specified and directed by Engr In Charge.

S&F in repair Vitreous China Urinal flat back size 465x355x265mm white with grating and union for discharge pipe incl fixing plug , bedding, urinal against wall in CM 1:2 securing urinal to plug pointing around back in cement fixing autmetic flushing cistern with bracket flush pipe grating and union for discharge pipe etc complete all as specified and directed by Engr In Charge.

S & F in repairs for Wash Hand basins, Vitreous China, white, flat back, size 550x440mm, including cutting for and pinning in ends of brackets or erecting stand, angle bracket (but exclusive of fixing of supply, waste pipe, taps) complete all as specified and directed.

S&Fin repairs PVC Valveless, syphonic action type, flushing cistern of 10ltr capacity, high or low level, white with inlet, ball valve, float and and handle incl brackets, and connections to flush pipes of polythelene of low or high density or PVC 32mm dia for low level cistern complete all as specified and directed by Engr-in-charge.

S&Fin repair Vitreous China wash down water closet pan ( pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) incl Plastic water closet seat, black, closed patern with flat bottom and cover and mild steel chromium plated or alumined hinging device vitrious Chaina pedestal pattern WC incl PVC seat cover and flush pipe etc complete all as specified and directed by engr-in-charge.

S&F in repair Soap dish, any type, fixed to plug with chromium plated brass screws embedded in the wall all as specified and directed by Engr-in-charge.

S&F in repair 20mm dia brass chromium plated tubular towel rail, D type, 60cm long b/w flanged and directed by Engr-in-charge.

S&F cast iron floor trap 75mm out let dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)..

S&F in Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guards and railing 60cm long complete all as specified and directed by Engr In Charge.

S&F 15mm bore galvanised steel tubes, 'medium grade' with all fitting and fixed complete to walls and ceiling or laid in floors completed all as specified and directed by E-in-Charge

Supply & fixing in repair 15mm pillar taps fancy type cast copper alloy, with capstan heads, chromium plated, screwed down , high pressure, with or without lettered 'Hot' or Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed. Bore of pipe in 15mm complete all as specified and directed by Engr In Charge..

S&F in repair 32mm dia PVC waste pipe for WHB complete all as specified.

S&F in repair C.P grating 100mm square/round with or without hole complete all as specified.

S & F 200mm length aluminium alloy, anodised, sliding door bolt hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.

M & L for preparing new plastered and applying 3mm thick Birla wall care putty and applying two coats of OBD white or tinned over coat of primer on wall complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc all as specified and directed by Engr-in-Charge

Taking down unserviceable submain wiring and service cable alongwith batten /PVC conduits etc. and making good disturbed surfaces of walls/floors and match the existing surface all as directed at site.

Taking down unserviceable main switches, DBs with MCB SP/Isolators by unscrewing form board complete all as specified and directed by Engineer-in-Charge

Matrial & Labour for point wiring using approved colour coding as per IS with using approved coper coding as per IS 1.5 Sqmm multistranded , 1100 volt grade copper conductor FRLS cable of PVC insulated and unsheathed type alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable for continuous earthing in & incl PVC casing & caping with accessories having ISI mark fixed on wall surfaces / ceiling including provision PCV Box on top for fixing switches sockets etc. all as specified for one light point / fan / Bell point controlled by one switch complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No 75 here-in-before but controlled with one 3 pin socket outlet 5 Amp on the same board with other switches with cables 1.5 Sqmm complete all as per specified and directed by Engineer-in-Charge.

All as per Srl item No 75 here-in-before but controlled with one 3 pin socket outlet 5 Amp on the independent board with cable 1.5sqmm including provision of 1.5 sqmm single core multistanded PCV insulated copper conductor as earth conducting conductor complete all as per specified and directed by Engineer-in-Charge.

All as per Srl item No 75 here-in-before but controlled with one 3 pin socket outlet 15 Amp, independent board with cable 2.5sqmm including provision of 2.5 sqmm single core multistanded PCV insulated copper conductor as earth conducting conductor complete all as per specified and directed by Engineer-in-Charge.

Supply and fixing of switch piano type 5 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge,

Supply and fixing of socket outlet 3 pin 5 Amp 2-in-one 230 Volt flush type complete all as specified and directed by Engineer -in-Charge.

Supply and fixing of switch piano type 15 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge,

Supply and fixing of Socket outlet 2 in 1, 3 pin, 5 and 15amp flush type single pole one way complete all as specified and directed by Engineer -in-Charge,

M&L Ceiling rose, 3 terminal with ISI mark all as specified and directed by Engr-In-Charge.

Material and labour for lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings. Make : Anchor/leader/havells

Supply and fix in replacement LED Batten 20W , 4 ft (Approx) length ultra slim square profile with extruded polycabonate, enviromenental friendly, energy efficient , connected with 23/.0076 twin core PVC flexible cable complete all as specified and directed. Make- Havells / Philips / Crompton

Supply and fixing 9 watts LED backup lamp of 4 hours backup, with auto switch on mechanism in case of power failure, works as regular 9w lamp in normal mode and a 4w lamp in backup mode all as specified and directed by Engg-in-Charge. Make: Havells

Supply & Fixing LED Bldg security light fitting 30 Watt with best in class design & robust heat sink along with class leading IP 65,IK & surge protection for long lasting performance connected with copper conductor cable of suitable size. Make Havells/Bajaj/Crompton. Note:- Sutable size bore of Security light suitable for GI Bracket measured and paid seperately in respective item.

Material and Labour street light bracket made out from GI Pipe 32 / 40 mm bore light grade 1.20 meter long bent to required shape and fixing to poles etc including fixing of clamps, nuts, bolts etc as specified and directed by Engr-in-Charge.

Supply and fixing of sheet metal enclosure double door for DBs single pole and neutral for 08 way 240 volt complete all as specified and directed by Engineer-in-Charge

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. (i) SP 5 to 32 Amp

(ii) SPN 63 AMP

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated 16 sqmm two core aluminium solid conductor , served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular

Supply and fixing House service bracket (hook type complete with 3.0m long G.I. pipe 40mm dia Med. Grade), with two nos of suitable size of clamp,nuts, bolts and wahers etc fixed to GI sheet roof complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below the ground level with top edge of the plate not less than 1.5 mtr below the normal ground level connected to the galvanised earth wire 4 mm dia by means of bolts, nuts hook nuts and washers of galvanization of steel all as shown in electrical plate no 3 connected to earthing testing point all as specified or indicated including testing on completions.

Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in onduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire

Supply and fixing surface & wall mounted LED 5 W tube light fitting batten, mirrorlite slim type with extruded aluminium housing alongwith 10W LED lamp PC body with all accessories all as specified and directed by Engg-in-Charge. Make: Havells / Philips / Crompton

Supply & Fixing LED light fitting 1 x 9 W/1 x 10 W bulkhead luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. Make havells/Bajaj

S&F in replacement exhaust fan, Steel body AC Single Phase, 230V of size 300 mm sweep, with blade and frame and louvres. complete all as per specified and directed by Engineer-in-Charge.

Supply,fixing, Testing water heater storage type with multifunctional safety valve, electric operated 230 V, Single Phase complete including one no of heating element, automatic, thermal cut out, fusible plug, anti vacum sys, built in presser release valve,thermostat, rust proof powder coated body, indicator lamps and all safety advices as per E-in-C's Branch technical instructions and of capacity 25 liters including provn of grouting bolts in walls including piller cock , pvc connection ect and making good disturbed surfaces. Make : CG/Racold/Havells/Bajaj/indo and all as specified and directed by Engineer-in-charge .

Supply and fixing surface & wall mounted LED 10 W tube light fitting batten, mirrorlite slim type with extruded aluminium housing alongwith 10W LED lamp PC body with all accessories all as specified and directed by Engg-in-Charge. Make: Havells / Philips / Crompton

Supply and fixing of sheet metal enclosure double door for DBs single pole and neutral for 04 way 240 volt complete all as specified and directed by Engineer-in-Charge

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated 10 sqmm two core aluminium solid conductor , served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular

Schedule of Credit

M/S Gulab Singh (BID ID -3489635)