Signalling works in connection with "Track Renewal works of TSR(P) and TRR(P) in Solapur Division of Central Railway."

02-SOR EXECUTION

03-NS SUPPLY AND EXECUTION

Item Breakup - 01-SOR SUPPLY

2.00 260430.00 color coding of insulation of inner core shall be in six color viz Blue, Red, Grey, Green,Brown & Black conforming to IRS 76/89 (Amd.3) or latest. ( Inspection by RDSO ) SOLAPUR DIVISION-S AND T/CENTRAL RLY

2.00 170848.00 color coding of insulation of inner core shall be in eight color viz Blue, Red, Grey, Green, Brown, Black, Yellow & White conforming to IRS 76/89 (Amd.3) or latest. ( Inspection by RDSO )

2.00 119222.00 core, multistrand 1x10 Sq.mm (80 conductor each diameter 0.40 +/- 0.01) as per IS 694/2010. with latest amendment if any with insulation thickness of 1.0 mm nominal conductor resistance 1.91 ohms/km and test parameters are as per IRS (S) 76/89 (Amd.3)or latest. ( Inspection by RDSO )

5.00 yellow, Brown, Black, White as per site engineer instruction) finolex/polycab/delton make. IRS:S-76/89 (Amd.3), BS: 4808 Part-2. Wire to be procured from RDSO approved vender. ( Inspection by RDSO )

50.00 secondary cells 2V 80AH as per spec. IRS 88/2004 version 1.0 with latest amendments. ( Inspection by RDSO )

10.00 (No.RSSK 3515/19) or functional equivalent without base plates. ( Inspection by RDSO )

10.00 (No.RSSK 31/0001) or functional equivalent without base plates. ( Inspection by RDSO )

30.00 24 VDC along with plug, board, retaining clip and connectors conforming to BRS:931A,IRS:S60/78 with Amendment no.1 , IRS:S34/68 with Amendment no.6 & IRS:S23/88 with Amendment no.1 ( Inspection by RDSO )

50.00 relay, 8F-8B, 24 VDC along with plug, board, retaining clip and connectors conforming to BRS:930, IRS:S60/78 with Amendment no.1 , IRS:S34/68 with Amendment no.6 & IRS:S23/88 with Amendment no.1 ( Inspection by RDSO )

22.00 up, 8F- 4B along with plug, board, retaining clip and connectors conforming to BRS:933 IRS:S60/78 with Amendment no.1 , IRS:S34/68 with Amendment no.6 & IRS:S23/88 with Amendment no.1) ( Inspection by RDSO )

42.00 Ohm, 2F.1B, along with plug, board, retaining clip and connectors conforming to BRS:939A, 966 & Appendix F2, IRS:S34/68 with Amendment no.6 & IRS:S23/88 with Amendment no.1) ( Inspection by RDSO )

30.00 2F-2B, contacts, 9 ohms. Complete with plug, board, retaining clip and connectors as per RDSO/SPN/84 Ver. 2.0 with Amendment No.1 or latest. ( Inspection by RDSO ) SOLAPUR DIVISION-S AND T/CENTRAL RLY

20.00 along with plug board, retaining clip and connectors conforming to BRB:935A. ( Inspection by RDSO )

300.00 working voltage 24V - Colour - Red/Yellow/Green. ( Inspection by Consignee )

2.00 61649.00 UFSBI system to work on back up media (either VF channel on OFC P/Mux or 2 Mbps E1 channel from STM or direct dark single mode optic fibre cable upto 30 km distance. ( Inspection by RDSO )

40.00 RST-11444/1(A), RDSO Drg No SA- 23460(AG), SA-23461(C) , RST-11445, SA 23456(P), SA 23477(G) & SA 23476-77 (IB) as applicable respectively with Latest Amendment. ( Inspection by Consignee )

28.00 11791 (STOP BOARD)/ RDSO Drg No 7235/B as per extent C.Rly practice. ( Inspection by Consignee )

38.00 Goods warning Board (SK-784) RDSO Drg No. SA 2380 (Adv), SA 2370/M-, Block section limit Board RDSO Drg No. SA 2373 - Paint and retroreflective arrangement as per Railways drawing. ( Inspection by Consignee )

40.00 lock with Three common keys. ( Inspection by Consignee )

1000.00 made of PBT Specn No.IRS/75/2006 (Rev - 2) with latest amendments and RDSO Drg.No.SA-23741A Alt.4., SA-23745 Alt.5, SA-23746, SA-23748 Alt.4, & SA-23756 Alt.3. ( Inspection by RDSO )

100.00 as per RDSO Drg No SA-23748 Alt 4, SA- 23749 & Spec No.IRS S 75/2006 Rev.02 with latest amendment. Fuse block shall be suitable for round head type voltage fuses. ( Inspection by RDSO )

200.00 type low voltage cartridge fuse as per specn No. IRS/S/78/92 with latest amendments - 2A/4A/6A capacity ( Inspection by RDSO )

8.00 Drg.No.CR/S&T/SK-815 ( Inspection by Consignee )

30.00 C.Rly Drg.No.RST 11509 made from fiber glass alongwith terminal blocks. ( Inspection by Consignee )

20.00 disc type 7.5/15/30 ohms as per RDSO Drg. No. SA 20161-66/M (Adv) with latest amendments ( with phenolic moulded base). ( Inspection by RDSO ) SOLAPUR DIVISION-S AND T/CENTRAL RLY

2.00 galvanised, 7 mm suitable for 4mm dia bonding wire as per spec No. IRS: S 17-75 Revision 3. ( Inspection by Consignee )

19000.00 lead connections. PVC jacketed wire rope should be of Galvanised steel wire rope 6mm dia (6x19 stranded wire with steel core of 6 mm dia) sheathed with PVC 2mm wall thickness, overall thickness being 10 mm. PVC sheath should be made of type 6 compound as per IS 5831 of 1984 Reaffirmed 2001 and steel wire rope as per IS: 2266:2019. Reclaimed for recycled material should not be used. ( Inspection by RITES )

3000.00 for track circuit rail bonding. As per IRS Specification S:13-62 ( Inspection by Consignee )

30.00 for measuring specific gravity of Battery Graded acid with mounting stand in location Boxses. Consignee inspection under manufacturer certificate. ( Inspection by Consignee )

140.00 set suitable for ground connection as per RDSO drg No T-10367, T-10368, T-10384 as applicable and to the spec IRS S 23/88 with Amendment No.01 & 40/84 with Amendment No.01 or latest amendments. ( Inspection by Consignee )

of Tongue insulation set consisting of one inlsulating plate as per Drg no: RST-106961 & 3 nos of Ferrules with collars to suite rodding supplied as per RDSO spec & Drg.no: RST- 10692 ( Inspection by Consignee )

140.00 as per RDSO drg No: T-10372 Alt2, T-10368, T-10371 Alt2, T-15083/88/Alt2 & T- 11690/Alt2 and to the spec IRS S 23/88 with Amendment No.01 & 40/84 with Amendment No.01 or latest amendments. ( Inspection by Consignee )

90.00 class as per spec. No.IS 1239 PT. 1/2004 or latest with sockets and fittings. TATA/JINDAL/ZENITH BIRLA make. ( Inspection by Consignee )

180.00 coupler and 'O' ring fire resistant, anti rodent, in 6 meter length of size 120 mm outer dia as per RDSO/SPN/204/2011 Ver 1.1 with Amd.1 or latest. ( Inspection by Consignee )

150.00 150mm dia outer and 100 mm dia internal 1 mtr long matching to IS No.458/2003 amendment-1 with Rev.4. ( Inspection by RITES ) SOLAPUR DIVISION-S AND T/CENTRAL RLY

30.00 along with all accesories, extinguisher testing certificate has to be supplied along with - Supply of ISI marked Carbon Dioxide type (BC) fire extinguisher of 4.5 Kg capacity confirming to IS 2878: 2004 from seamless cylinder, with IS marked control value, high pressure mtr., Long discharge hose and horn complete with initial gas charged with carrying handle and wall mounting bracket etc. as required by site Engineer. ( Inspection by Consignee ) Total 5603543.00

Item Breakup - 02-SOR EXECUTION

56.00 Board, goods warning board with contractors own material. The work shall be done as per instruction of Rly engineer at site.

1100.00 phenolic laminated sheets and fixing by Conductor stainless steel/brass nuts & bolts. This includes provision of two additional holes on the board on either side for cable conductor entry.

2200.00 terminal/fuse blocks in the apparatus cases/ Conductor cable termination rack. This includes all associated works of pulling out the cable from underground. The work shall be done as per location plans and instructions of Rly engineer at site.

2.00 foundation with contractors Anchor bolts, cement, ballast and other materials. The required scaffolding ferma etc for Casting of foundation will have to be brought by the contractor at his own cost. i) Single Case as per Drg No SK-803

2.00 foundation with contractors Anchor bolts, cement, ballast and other materials. The required scaffolding ferma etc for Casting of foundation will have to be brought by the contractor at his own cost. ii)Half Case as per Drg No SK-804

2.00 filling of location foundations and plastering .i)Single Case

2.00 filling of location foundations and plastering. ii)Half Case

2.00 chargers batteries etc. as applicable) & wiring of the same in apparatus cases as per location diagrams & circuit diagrams, as per Instruction of site incharge and practice. i) Single Case

2.00 chargers batteries etc. as applicable) & wiring of the same in apparatus cases as per location diagrams & circuit diagrams, as per Instruction of site incharge and practice. ii)Half Case SOLAPUR DIVISION-S AND T/CENTRAL RLY

8.00 per Drg.No.RE/S&T/SIG/Tender/SK726/85 including earth wire connected through GI wire 8 SWG supported on M.S. flat of size 6mm x 40 mm to earth electrode as per drg. No.CR/S&T/SK-815 for sigg. Equipment such as lever frames, apparatus case, signals, relay racks, block instruments, and etc. as per RE manual. The earth value should be less than 10 Ohms including the lead wire. The value should be measured in presence of Rly. supervisor. It should be documented and painted on earth enclosure made of concrete.( only earth electrode will be supplied by Railway). All other material required for provision of earthing will be brought by the contractor.

300.00 of MS flat clamps on girder bridges/rocky area on GI pipes/its coupler as per drawing with requisite no. of nut and bolts as per site requirement and as per the instructions of Railway Engineer at site.

700.00 jacketed wire rope for Track Lead connections. PVC jacketed wire rope should be of Galvanised steel wire rope 6 mm dia (6x19 stranded wire with steel core of 6mm dia) sheathed with PVC 2mm wall thickness, overall thickness being 10 mm. PVC sheath should be made of type 6 compound as per IS 5831 of 1984 Reaffirmed 2001 and steel wire rope as Per IS:2266:2019. Reclaimed or recycled material should not be used. This will include drilling of 7.1mm dia holes in rails (4 Nos) and provison of two jumpers for each bond, clipping of bonds etc. with contractors own materials and tools as per instruction of Rly engineer at site.

400.00 (8 SWG) for track jumper & fish plate joints bonds. This will include drilling of 7.1mm dia holes in rails (4 Nos) and provision of two jumpers for each bond, clipping of bonds etc. with contractors own tools as per instruction of Rly engineer at site.

400.00 route plan, 1.0 mt. deep and 300mm wide along side the track in normal soil/strata, conforming to distances as per cable route plan and refilling after cable laying. This work includes covering of cable laid to trench by loose soil for a layer of 50mm thickness after clearing of route, bushes etc. It shall be ensured that top of the cables laid is at a depth of 0.8 m or more. If it is less, then the width and depth shall be suitably increased and accordingly proportionate payment shall be made. In case depth of trench is not achievable due to site conditions, proportionate payment will be made as per procedure. The work shall be done as per extant practice on C.Rly & the instruction of Railway engineer at site. Drg No SK 805 SOLAPUR DIVISION-S AND T/CENTRAL RLY

200.00 route plan, 1.0 mt. deep and 300mm wide along side the track in hard soil, conforming to distances as per cable route plan and refilling after cable laying. This work includes covering of cable laid to trench by loose soil for a layer of 50mm thickness afer clearing of route, bushes etc. It shall be ensured that top of the cables laid is at a depth of 0.8 m or more. If it is less, then the width and depth shall be suitably increased and accordingly proportionate payment shall be made. In case depth of trench is not achievable due to site conditions, proportionate payment will be made as per procedure. The work shall be done as per extant practice on C.Rly & the instruction of Railway engineer at site. Drg No SK 805

70.00 (except concrete type) for trenching and excavation to depth of 300mmx300mm wide approx. and refilling after laying of RCC/GI/DWC pipe & to restore them to original condition. The work shall be done as per extant practice on C.Rly & the instruction of Railway engineer at site. Drg No SK 807

90.00 bridges etc. and concreting of ends with brick masonry at both ends as per the instruction of Rly engineer at site.

80.00 flange/road level (for LC) and, 0.3 Mtr to 0.6 Mtrs wide and back filling after placing of DWC/RCC/GI pipe. (Placing of DWC/RCC/GI pipe coverd separately). The ballast disturbed be screened and dressed as required by Engineer-in-charge or his representatives and road tarred immediately. Drg No SK 806

1410.00 RCC Half round pipes in trenches at places of track and road crossings, platform cutting etc.

8.00 various cores/sizes in trenches.

40.00 over one coat of primer on the following after scrapping and cleaning of the surface wherever necessary with contractor own supply of paints. Wherever required contractor shall apply coating of epoxy paint also as per instructions of site-in-charge. Epoxy will be supplied by Railways. NOTE:- The paint and primer should be from M/s Asian paints Co. Ltd.,. The paints will be primer (IS 5660 of 1970) the Aluminium synthetic black enamel (IS 2932 of 1974) brilliant white and yellow Painting two coats of enamel paint over one coat of primer. (i)Apparatus Cases Full size. SOLAPUR DIVISION-S AND T/CENTRAL RLY

40.00 over one coat of primer on the following after scrapping and cleaning of the surface wherever necessary with contractor own supply of paints. Wherever required contractor shall apply coating of epoxy paint also as per instructions of site-in-charge. Epoxy will be supplied by Railways. NOTE:- The paint and primer should be from M/s Asian paints Co. Ltd.,. The paints will be primer (IS 5660 of 1970) the Aluminium synthetic black enamel (IS 2932 of 1974) brilliant white and yellow Painting two coats of enamel paint over one coat of primer. (ii)Apparatus Cases Half size.

90.00 over one coat of primer on the following after scrapping and cleaning of the surface wherever necessary with contractor own supply of paints. Wherever required contractor shall apply coating of epoxy paint also as per instructions of site-in-charge. Epoxy will be supplied by Railways. NOTE:- The paint and primer should be from M/s Asian paints Co. Ltd.,. The paints will be primer (IS 5660 of 1970) the Aluminium synthetic black enamel (IS 2932 of 1974) brilliant white and yellow Painting two coats of enamel paint over one coat of primer. (v)Track lead Junction Box. (Black enamel outside only)

100.00 over one coat of primer on the following after scrapping and cleaning of the surface wherever necessary with contractor own supply of paints. Wherever required contractor shall apply coating of epoxy paint also as per instructions of site-in-charge. Epoxy will be supplied by Railways. NOTE:- The paint and primer should be from M/s Asian paints Co. Ltd.,. The paints will be primer (IS 5660 of 1970) the Aluminium synthetic black enamel (IS 2932 of 1974) brilliant white and yellow Painting two coats of enamel paint over one coat of primer. (vi)Point Machine with ground connections complete (Point Machine with Black enamel only outside and ground connections with Red Oxide)

80.00 over one coat of primer on the following after scrapping and cleaning of the surface wherever necessary with contractor own supply of paints. Wherever required contractor shall apply coating of epoxy paint also as per instructions of site-in-charge. Epoxy will be supplied by Railways. NOTE:- The paint and primer should be from M/s Asian paints Co. Ltd.,. The paints will be primer (IS 5660 of 1970) the Aluminium synthetic black enamel (IS 2932 of 1974) brilliant white and yellow Painting two coats of enamel paint over one coat of primer. (vii)Axle counter devices.

100.00 Machine, Track Lead junction Boxes, Block joints, Apparatus Cases etc.(each item to be taken as One Unit) This work will be carried out as per the standard practice being followed in Central Railway. SOLAPUR DIVISION-S AND T/CENTRAL RLY Total 891876.00

Item Breakup - 03-NS SUPPLY AND EXECUTION

Micro Controller Logic card no 3 ( MLB 1) of Numbers CEL make for SSDAC as per RDSO Spec. RDSO/SPN/177/2012 Ver 3 or latest. MAKE- CEL.(Inspection by RDSO)

Relay Drive card for CEL Make Single Section Numbers Digital Axle Counter (SSDAC) system as per RDSO Specn . No.RDSO/SPN/177/2012 / Ver. 3 or latest of CEL make.(Inspection by RDSO)

Micro Controller Logic card no4 (MLB 2) of Numbers CEL make for SSDAC as per RDSO Spec.RDSO/SPN/177/2012 Ver 3 or latest of CEL make. (Inspection by RDSO)

Signal conditioner card no. 1 (SCC1) for Numbers SSDAC as per RDSO Spec no- RDSO/SPN/177/2012 VER.3 or latest of CEL make.(Inspection by RDSO)

SCC2 Card for CEL MAKE SSDAC SYSTEM AS Numbers PER RDSO SPECN.No RDSO/SPN/177/2012 Ver.3 Latest or latest MAKE-CEL (Inspection by RDSO)

DC-DC CONVERTER CARD FOR CEL MAKE Numbers SSDAC as per RDSO Spec. no. RDSO/SPN /177/2012 Ver.3 or latest.Make -CEL (Inspection by RDSO)

MODEM CARD suitable for CEL MAKE SSDAC Numbers SYSTEM as per RDSO SPEC.NO RDSO/SPN/ 177/2012 Ver.3 or latest MAKE-CEL (Inspection by RDSO)

Execution of S & T work related to Job engineering /Signalling block of CTR/TTR/TSR or others, in one block, five unskilled manpower have to be provided during block for S&T connection removing & refixing as per Railway site engineer instruction.

AGROMEC Semi Electric Pallet Stacker. Numbers (UNIT-NUMBERS=PIECES) (Inspection by Consignee) SOLAPUR DIVISION-S AND T/CENTRAL RLY

Supply of Insulation set for Ground Set connection of high thrust point machine with 220mm throw and clamp type locking as per IRS S 24-2002.Ground connection specification is RDSO/S 3454.OEM/Authorised dealers guarantee certificate to be submitted at the time ofsupply Accepted offer : Insulation sets for Ground Connection, Made of Nylon66 for 220mm throw Point Machine as per IRS.S.40/84 or latest. One set consisting material of: a)Insulating washer Drg. No.-S- 8640=12Nos. b) Insulating Washer Drg. No.:- S-8640/1= 04Nos. c) Insulating Washer Drg. No.:-S8640/2=02Nos, d)Insulating Bush Drg. No.:- S 23199=10Nos, e) Insulating Bush Drg. No.:-S 3463=01Nos. f)Insulating Bush Drg. No.:-S 22179=02Nos g) Insulating Bush Drg. No.:-S8912=02Nos, h) Insulating Plate Drg. No.:-S-3404=02Nos, i) Insulating Bush Drg. No.:-S 8813=04Nos, j) Insulating Plate RH Drg. No.:-S 3265=01No, k. Insulating Plate LH Drg. No.:-S 3266=01No. Firm offer : make: TITANIA or similar. (Inspection by Consignee)

Maintenance Tool Kit for MSDAC ETU001 Set Eldyne make against the test certificate & guarantee certificate of OEM.Consisting of Items as listed below and as prescribed by OEM but not limited to:- 1. True RMS Digital Multimeter with probe set-01 no. 2. Extended wired socket to Interface with diagnostic plug- 01 no 3. Selector Switch on Panel Base- 01 no. 4. Adjustable Torque Wrench with 13 mm and 19 mm inserts-01 set 5. 19 mm Double ended spanner- 01 no. 6. Dummy Wheel-01 no. 7. Crimping Tool- 01no. Make/Brand - Eldyne Electro Systems Pvt Ltd, Kolkata. (Inspection by Consignee).

Self Ballasted LED Lamps for General Numbers Lighting Services 9 Watt, 2Star Brand: WIPRO or Similar (Inspection by Consignee).

Supply of Panel Button Complete with H Numbers contact for Siemens panel. Make Siemens, Sigdan or SEW. Colour Red, Yellow nos., Blue, grey, Blue with Dot. (Inspection by Consignee).

Supply of Tool Bag of size, Length 17Inch, Numbers Height 9 Inch and width 8 inch.Made of 410410 grade Taurpalin material of Wax coated, provided with 3 layer partitions. Stiched with heavy gauge ZIP Runners. Hand grip handles and shoulder grip Nylon belt.Suitable to accommodate Technician tools. Printed with Railway logo (INDIAN RAILWAYS, SOLAPUR DIVISION, S&T DEPARTMENT ). Sample to be approved before bulk supply. Make: Branded/Local Made/PAHAL/UNNDUN/AJAY/DENEERS (Inspection by Consignee)

JET WITH DEVICE Pallet Truck 2000 kilogram Numbers Kg.(UNIT-NUMBERS=PIECES) (Inspection by Consignee)

Supply of Hand Operated Track Drill Machine Numbers cycle gear type suitable for Drilling bond wire holes of size 9/32 inch in railway track. Make : Chandra, KI or equivalent.(UNIT- NUMBERS=PIECES). (Inspection by Consignee) SOLAPUR DIVISION-S AND T/CENTRAL RLY

Supply and Fixing of Nut Protection Device. Numbers (Inspection by Consignee)

Supply and Fixing of 100 mm Long MS Bolt Numbers (Dia 20 mm) As per IS:2585 or latest along with MS spring washer M-20-B As per IS:3063 or latest. (Inspection by Consignee)

Supply and Fixing of Spring Inserted Numbers Reusable Self Lock Anti Loose Nut M -20 (As Per IS:1363 or latest) Medium Carbon Steel for 100 mm Long MS Bolt(Dia 20 mm) As per IS:2585 orlatest. (Specifications: Model No. SP20 Pitch: 2.5 Hn:16.0Bn:30.0 Cn : 34.6 Ln:28.8Sn:30.0. Material: STS, S45C,SCM, Plating Electro Zinc Plating, Melted Zinc, Nickel,Chrome, Zinc Powder Plating.Make: SAPER LOCK or similar.( 1.Tenderer Must enclose NAS3350 Vibration Test Certificate along with tender. 2. Authorized Distributor Certificate must accompany the tender. 3.Past Performance/ CRN/IC/PO to be submitted along with tender.)(Inspection by Consignee).

Refiling of CO2 type Fire Extinguisher Numbers capacity-4.5 Kg. Painting of CO2 Fire gas cylinder Letter painting on cylinder's at re weight & weight with refill gas with description of accessories. (Inspection by Consignee).

HDPE Pipe 110 mm Diameter,PE63, Class Metre PN6, with confirming to IS4984 with ISI marked (or) Latest. (Inspection by Consignee)

Digital earth tester with in built rechargeable Numbers battery 3.5 digit LCD display, testing range 0.01 ohm to 2000 ohm & all accessories as four spikes, suitable length cable (10M, 20M, 30M, 40M)on winder, battery charger, carrying bag, operating manual, hammer etc. (Inspection by Consignee).

Drill Bit Size 7.14 MM HSS parallel shank Numbers twist drill (Jobber series) make addition or similar or better. (Inspection by Consignee).

High speed steel high cobalt contant drill bit Numbers 14 MM (Inspection by Consignee)

L Bracket insulation made of Nylon 66 as per Set specification No:IRS.S 40/84. One set consisting of 1)Insulating plate Drg no S.8804=1nos, 2) Insulating Bush drg no S.8813=2nos, 3) Insulating washer drg no S.8640=04 nos. accepted offer for "DIPAM UDYOG" or similar make. (Inspection by Consignee)

Electric track drilling machine equipment Numbers consisting of Heavy duty electric track drilling machine works on 110v 50Hz AC with suitable interchangeable track mounting stand with depth adjusting facility. Make of heavy duty electric drilling machine is of Rallies or Wolf or Bosch only. Detailed specification enclosed in Annexure. Make /Brand: Bosch model GBM13RE/Ralli wolf make. (Inspection by Consignee)

Input card compatible with Deltron make Numbers UFSBI system as per Specn. IRS-S-105/2012 Ver.0 or latest. Accepted Make: DELTRON (Inspection by RDSO) SOLAPUR DIVISION-S AND T/CENTRAL RLY

Supply of Output card compatible with Numbers existing UFSBI system as per specification IRS:S-105/2012 Ver 0.0 suitable for DELTRON MAKE (Inspection by RDSO )

Supply of Reset Card of Deltron make Numbers Universal Fail Safe Block Interface (UFSBI) equipment as per IRS:S-104/2012, Ver 0 or RDSO Spec. No. IRS:S-105/2012, Ver. 0 with latest amendments, suitable with existing installations of Ranchi division. Make-M/s DELTRON EQUIPMENTAND SYSTEMS PVT. LTD.-KOLKATA. Make- DELTRON (Inspection by RDSO )

Supply of CPU card compatable with existing Numbers UFSBI system as per specification IRS:S- 105/2012 Ver 0.0 (suitable for DELTRON MAKE).(Inspection by RDSO )

Supply of Control and communication card Numbers compatible with existing UFSBI system as per specification IRS:S105/2012 Ver 0.0 suitable for DELTRON MAKE (Inspection by RDSO )

Digital Current Clamp Meter to measure Numbers current leaks parasitic draws down to 1ma and electric loads from 1 ma to 100 Amp AC/DC and voltages from 0 to 600v AC/DC, small jaw size to measure current in signaling circuits, 4 digit display. Make Fluke/GTC/KOICO or superior with better specifications mentioned with all accessories like test lead, batteries, and carrying case, sample may got approved from consignee before supply.(Inspection by Consignee)

Event Logger for Single Section Digital Axle Numbers Counter (SSDAC), Make-G. G. Tronics, as per RDSO specn. no. RDSO/SPN/177/2012 (Ver.3) or latest, suitable with existing Single Section Digital Axle Counter (SSDAC). Make Brand GG TRONICS (Inspection by RDSO )

Supply of COM 1/2 communication card Numbers compatible for GG TRONICS make SSDAC as perRDSO Spec. no. RDSO/SPN/177/2012 (Ver.3) or Latest. Make Brand GG TRONICS (Inspection by RDSO)

Supply of RD Card (Relay Drive Card) Numbers suitable for G.G. Tronics make SSDAC as per RDSO Spec No. RDSO/SPN/177/2012 Ver 3.0 or latest. Make Brand GG TRONICS (Inspection by RDSO ) Total 3249334.59