Loading
Loading…
Loading…
Tender Value
₹2.2 Cr
EMD Value
₹3.3 L
Closing Date
23 Oct 2025, 10:00 pmClosed
Directorate of Municipal Administration
Rashmi AEE madam
9019672976
Construction of Proposed 50 TPD MRF centre Material Recovery Facility of Machinery Phase 1 at Raichur city
DMA/2025-26/IND5398
DMA/2025-26/IND5398
Open
Two Tender Document System(Two Cover)
DMA City Corporation Raichur
4 documents required · 4 mandatory
The tenderer should be a manufacturer OEM who must have manufactured tested and supplied minimum of 52 TPD Capacity Material Recovery Facility Municipal Solid Waste Processing Facility In a Single Work. however it will be 40 Min 20 TPD In a Single Work. with respect to valid Micro and Small Enterprises of similar type specified in the Schedule of Requirements to any Government dept ULB PSU or any other Government organizations in any one of the last 3 years financial year (2022-23 to 2024-25) and be in satisfactory operation for 12 months as on date of tender opening Performance Certificate must be issued by not below the rank of Executive Engineer.
The manufacturer furnishes authorization in the prescribed format assuring full guarantee and warranty obligations as per GCC and SCC.
The tenderer, as authorized representative distributors should have supplied, commissioned satisfactorily at least 16 TPD Material Recovery Facility/Municipal Solid Waste Processing Facility (In a Single Work). similar to the type specified in the Schedule of Requirements to Government Dept/ ULB/PSU/or any other Government organizations in any one of the last three financial years (2022-23 to 2024-25) (Performance Certificate Must be Issued by not below the rank of Executive Engineer)
The tenderer should furnish the information on all past supplies and satisfactory performance for both (a) and (b) above, in proforma under Section XII.
Tenderer/Manufacturer should submit Certificate of registration of the Company under the companies act, 1956 or GST, NISC registration or any other suitable registration certificate. Issued by Concerned Statutory Authorities under relevant act.
Tenderer offering to supply goods under the contract which the Tenderer did not manufacture of otherwise produce, the Tenderer has been duly authorized (as per authorization form in Section XIII) by the goods manufacturer or produce to supply the goods in India
The Bidders should have a turnover of minimum Rs. 219.00 Lakhs, in any two of last 3 Financial Years (2022-23 to 2024-25). (However, it will be 50 of the estimate cost of the quantity with respect to MSE in the last two preceding financial years) The Tenderer should submit turnover copy certified by Chartered Accountant with UDIN No along with profit & loss statement, Balance Sheet & IT Return File.
The tenderer should furnish details of local Service Centers, AMC charges after warranty period and information on service support facilities that would be provided after the warranty period in the Service Support Form given in Section XVII.
Tenderer firm/company should not be blacklisted by any government organization. The Tenderer shall furnish an Affidavit (Non judicial e-Stamp paper of Rs.200)/ for not having Black Listed earlier by the Firm / Company represented by its Proprietor / Partners / Directors / Chairman / Managing Director / Office Bearers in the Business Transactions of any Government /Semi-Government / Government Undertaking / Public Sector Organizations/ any other Departments.
₹5,000
₹3.3 L
3 Oct 2025
3 Oct 2025
24 Oct 2025
22 Oct 2025
16 Oct 2025
Fork lift 3 Stage Full Free Mast 4500mm MAST LOWERED HEIGHT 2100 mm WITHOUT BACK REST 1500 mm LONG FORKS 1070 mm FRONT & REAR SOLID TYRES REAR VIEW MIRROR,RIGHT AND LEFT SIDES STANDARD SEAT WITH SAFETY BELT LOAD BACKREST OVERHEAD GUARD TURN SIGNAL LIGHTS REAR LIGHTS BUCK-UP BUZZER STANDARD TOOL KIT ELECTRONIC ROTATING FLASHLIGHT (YELLOW)
Skid Steer Loader Skid steer loader Bull BULL SKID STEER LOADER - AV490 EQUIPPED WITH STD BUCKET, POWERED BY KUBOTA - 49.5 HP 4 CYLINDER LIQUID COOLED DIESEL ENGINE, HYDROSTATIC DRIVE WITH HYDRAULIC PILOT OPERATED VARIABLE DISPLACEMENT TANDEM PUMP WITH HEAVY DUTY.The rate includes the cost of transportation, supply, 1 year Insurance, RTO Charges, GST & any taxes if applicable.
Semi Electric Stacker Semi electric stacker (1000kg) SEMI ELECTRIC STACKER Capacity 1000kg, Mast Type Telescopic, Fork Length 1150mm, Fork outer width 560mm, Load center 600mm, Lowered Height of Fork 90mm, Lift Height Of Forks 200mm, Shut height of equipment 1600mm, Overall length of the equipment 1850mm, Overall width 850mm.The rate includes the cost of transportation, supply, installation, commissioning and GST including any other taxes if applicable.
Weighing Scale ESSAE DS 415N 1000KG CAPACITY 1000 X 1000MM PLATFORM, Frame MOC MS, Platter moc MSC, Connectivity RS 232. The rate includes the cost of transportation, supply, installation and GST including any other taxes if applicable
Pallet Truck - 2500 Kg Pallet truck (2500kg capacity) Detailed Specification. The rate includes the cost of transportation, supply, installation, commissioning and GST including any other taxes if applicable
Bag Opener Base frame Length 2000mm Rotor Diameter 600mm Width 1000mm Pulley Dia 500mm Rotor blade Angle 45 Deg.outer shaft 100mm Blade nos 50 q Blade Thickness 25 mm (high carbon steel) Outer hopper cover 3mm ms Material out let Screen 1000x 605mm Hole, Stand 100 x100 mm MS Pipe, Gear Motor 15 Hp (Crompton)The rate includes the cost of transportation, supply, installation, commissioning and GST including any other taxes if applicable.
Ballistic Separator Ballistic separator Detailed Specification In Annexure-3(Detailed Specifications have to be entered) (The rate includes the cost of transportation, supply, installation, commissioning and GST including any other taxes if applicable)
Transfer conveyor- underground & inclined M type conveyor 65 ft Transfer conveyor 65 feet With adjustable speed motor.Detailed specifications if applicable have to be entered.(The rate includes the cost of transportation, supply, installation, commissioning and GST including any other taxes if applicable)
Magnetic separator Model of machine DCC-C1000 Width of Belt 1000 mm Fabric of Belt Nylon - Nylon 400/4 ply Grade M-24(Top rubber 4mm Bottom 2mm) Belt Thickness 10 mm Thick Impact Idler Spacing 250 mm Type Of Conveyor V Type ( Idler Arrangment) Motor and Gear Box Branded /Imported Motor HP. (The rate includes the cost of transportation, supply, installation, commissioning and GST including any other taxes if applicable)
Horizontal Baler Machine Horizontal Baler. (The rate includes the cost of transportation, supply, installation, commissioning and GST including any other taxes if applicable)
Vertical Single box baler - 50 MT Capacity Vertical Single Box Baler 50 Tonner. (The rate includes the cost of transportation, supply, installation, commissioning and GST including any other taxes if applicable)
PVC Inclined Belt Conveyor 25ft - 7620 mm PVC inclined belt conveyor 25 feet Detailed Specification.(The rate includes the cost of transportation, supply, installation, commissioning and GST including any other taxes if applicable)
PVC Flat Belt Conveyor 45ft (Mezanine floor) for Secondary Sorting PVC insulated belt conveyor 45 feet (Mezzanine floor) PVC FLAT BELT CONVEYOR (MEZZANINE FLOOR) Dimension 15250 x 800 x 800 4500 LBH SS304 graded 2mm thickness frame & MS fabricated tubular legs Ciorino make 3mm thickness PVC nylon fabricated belts Bonvario 2HP motor, Bearings of UCF204 & Siemens VFD (The rate includes the cost of transportation, supply, installation, commissioning and GST including any other taxes if applicable)
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
MRF Raichur TENDER DOCUMENT (IND 5398call-3) DT 30.09.2025.pdf
Tender Document • 0.96 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].