PROVIDING ELECTRICAL INSTALLATION IN NEWLY CONSTRUCTED PANCHYAT SAMITJ STAFF QUARTERS TYPE II 12 QRTS TYPE III6 QRTS AND TYPE V2 NOS UNDER HEAD 2515OTHER RURAL DEV PRCGRAMME 101 PANCHYATI RAJ 01 05 SUPPLYMENTRY FUND TO Z P FOR CONST OF RES). BLDGS

Supplying and erecting UPVC reinforced flexible conduit 20 mm in dia. conforming to I.S. with required number of couplings, PVC bushes, check nuts etc. com lete.

Supplying and erecting PVC trunkjng (PVC casing-n •capping) of size 25 mm with accessories on wa!l/ceiling as per specification No• WC. MAJCON.

Supplying and erecting PVC trunking (PVC casing-n-capping) of size 32 mm with accessories on wali/ceiling as per specification No: WG.MA/CCN.

Supplying & erecting mains With 2x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunkingfinside pole/Bus bars or any o:her places as per specification No: WG-MA/BW

Supplying & erecting mains with Ix1.5 sq.mm F.R copper PVC insulated green colour wire laid in provided conduit/trunking/inside po!e/Bus bars or any other places as per specification No: WGMA/BW. (Rates for the earth wire shall be calculated as one ha}f rate oi mains of bunch of two wire

Supplying & erecting mains with 2x2.S sq-mm F.R copper PVC insui3ted wire laid in provided conduit/trunkinghnside pole/Eus bars or any other places. as per specification No: WG.MA/BW

Supplying & erecting mains with Ix2.5 sq.mm F.R copper PVC insulated qraen colour wire laid in provided conduit/trunkingiinside pole/Bus bars or any other places. es per specification No: WGMA!EW. (Rates foe the earth wire shall be calcuiated as one half rate of mains of buncl: of

Supplying & erecting mains with 2x4 sq-mm F.R copper PVC insulated wite laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying & erecting mzins with •Ix4 sq.mm F.R copper PVC insulated greettco.'our wire laid in provided conduit/trunking/jnside pole/Bus bars cr any other places. as per specification No. WGMA/BW, (Rates for tho earth wire sha!l be cajcutated as onchatf rate of mains of bunch of

Supplying & erecting mains 4 with 4x6 sq.mm F.R 10 copper PVC insulated wire laid in provided 7 bars or any otherconduit/trunking/inside pole/Bus places as per specification No: WG.MA/BW. (Double the rate of two wire bunch for calculating rate of four wire bunch up to 10 sq.

Supplying and erecting PVC insulated PVC round pole/Bus places as per specification No: WG.MA/BW. (Double the rate of two wire bunch for calculating rate of four wire bunch up to 10 sq.

Supplying and erecting Ceiling rose f Batten holder i Slanting holder / hanging cord switch / 36.75 hanging bell push I pendent holder bakelite base GA. erected on filled polypropylene board or polished double wooden block/ PVC junction box.

Supplying and erectin'g 'iSl mark modular type switch 6A / IOA duly erected on provided plate and box with wirin connections com lete. Supplying and erecting ISI mark modu;ar type bell oush with indicator_ 2 modules 6A I IOA, duly erected on provided platé and box with wiring

Supplying and erecting is: mark type switch '16 / 20 A with indicator, duly erected on provided plate and box with wiring connections

Supplying and erecting ISI mark modular type 3 pin GA multi sockets with safety shutter, duly erected on provided plate and box with wi•ing

Supplying and erecting mark modular type 3 174.30 pin 6 / GA multi socket with safety shutter, duly erected on provided plate and box with wiring

Supplying and erecting ISI mark modular type 3 pin 6/16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type indicator lamp, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type 6/16A fuse unit, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type blanking plate one module, duly erected on provided plate & box.

Supplying and erecting PVC Surface mod.tar switch box with double mounting plate fc. 2 modulas duly erected.

Supplying and erecting PVC. Surface modular switch box with double mounting plate for 6 modules duly erected.

Supplying and erecting F'VC Surface modular switch box with double mounting & front plate for 8 modules complete duly connected.

socket, copper wiring and earthing as per specification No: WG-PW/SW. (Rate approved by S.E (Elect.) Pune Vide Lr.No.2906/2020 Dated-25-11-2020) Wiring for plug on board with Modular Switch

with 1.5 sq.mm (2+1E) FR grade copper wire. modular type switch, earthing and required accessories as per specification No: WG-PW/SW Point wiring in PVC trunking (casirg-capping) (Light Point)

Point wiring in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FR grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW (Fan Point) (Rate approved by S.E (Elect.) Pune Vide Lr.No.2906/2020 Dated-25-11-2020)

Supplying and erecting square / round shaped CRCA /die-cast aluminium powder coated housing LED panel (slim edge-lit) light suitable for 13W to 18W with provision for plane front frame with translucent cover fixed to the housing complete.

Supplying and erecting square rectangular shaped CRCA /die-cast aluminium powder coated housing LED panel (slim edge-lit) light suitable for 25 to 32W with provision for plane front frame with translucent cover fixed to the housing complete.

Supplying and erecting corridor/passage light fitting (2 feet) including 9W LED lamp, comprises of extruded channel in plastic silver grey colour & with same plastic end cap on provided PVC block/wooden board.

Supplying and erecting decorative oval bulk head edge-lit 10W LED luminaire comprising of high brightness LED Fitting on provided PVC block /wooden board.

Supplying & erecting LED 18W tube light fitting (4 feat) with polycarbonate housing, heat sink, integrated HF electronic driver complete.

Supplying & erecting LED 20W tube light fitting (4) fect) with aluminium housing, heat sink, integrated HF electronic driver complete.

Supplying and erecting LED Mirror Light with integrated driver including 7W to 9W lamp with polycarbonate housing and opal diffuser to be fixed above mirror or as required on clamps complete

Supplying and erecting a light fancy wall bracket with arm fabricated from brass duly lacquered with suitable holder and fancy glass shade duly wired erected on wall with suitable size of polished wooden/laminated board.

Supplying and erecting bakelite call boll with 6 cm buzzer with double coil suitable for 2.10V complete erected on PVC block.

Supplying and erecting ding dong / electronic musical type call bell with heavy duty coil suitable to operate on 230V A.C. supply erected on polished double wooden block/sunnica block of suitable size

Supplying and erecting luminous modular type call bell indicator with plastic body, heavy duty coil and indicator lamp working on 230V A.C supply with resetting arrangement complete lerected on double wooden/sunmica board

Supplying and erecting LED street light fitting suitable for 20 to 25W, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as per specification No FG-ODF/FLS-2.

Supplying and erecting LED Street light fitting 3828.30 suitable for above 40W to 48W lamp, including lamp. with FF > 0.95 class iP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No. FG-ODF/FLS2.

Supplying and erecting street light Wall bracket made from 40 mm. dia 'B' class G.I. pipe 1.2 m in total length complete as per specification no. FG-BKT/WB

Supplying & erecting 0.5W, 230V integral type LED Lamp suitable for B-22/E-27 base. (Night Light)

Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22/E-27 base

Supplying and erecting fresh air cum exhaust fan of light duty 250 V AC. 50 cycles 300mm. 1400 RPM rust proof body & blades, wire mesh, duly erected in an approved manner.

Supplying and erecting five star rated energy saving Ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FNICF

round bar grouted in RCC slab with making the site as original. Supplying and erecting fan hook of 10 mm. M.S. round bar grouted RCC slab with making the site as original.

Supplying and erecting storage type vertical water heater 50 litres capacity with BEE 5 star rating high impact resistance engineering plastic body on wall / loft complete duly tested and marking sr. no. and date of erection. specification no. AP-WH/STWH

Supplying and erecting chromium plated heavy duty brass stop cock for inlet pipe of water heater (15 mm. dia)

Providing fibre reinforced pvc flexible pipe upto 1m length with brass locking nuts and washers and clips at both ends suitable for hot water and cold water both (1set of 2 nos) complete.

Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification no. Sw-SWR/MCB

Supplying, erecting & marking SPMCB 6A to 32A, B-series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking DPMCB 6 A to 32 A B-series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking FPMCB 40A to 63A in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking TPN MCB 40A to 63A, C-series in provided distribution board as per specification no. SW-SWR/MCB

Supplying erecting and marking double pole isolator only switch version of miniature circuit breaker of 40A with required wiring connections and lugs etc. in provided distribution board complete

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/flush mounted SPMCB of 12 ways, on iron /GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB

Supplying and erecting single pole and neutral distribution board (SPNDB) surfad mounted with 2 ways for incoming and 6 ways for outgoing SP MCB's on iron/ Gl frame as per specification no. SW-SWR/MCBDB

Supplying and erecting single pole and neutral noard (SPNDB) surface/flush distribution mounted with 2 ways for incoming and 10 ways for outgoing SP MCB's on iron/ Gl frame as per specification no. SW-SWR/MCBDB

Supplying & erecting CRCA sheet metal one enclosures suitable for DP MCB ITP MCB IFP MCH erected on angle iron/GI frame complete.

Supplying & erecting porcelain/epoxy bus bar support complete erected in provided MS box for 100A complete.

Supplying and erecting bus bar chamber triple pole complete as per specification no. CP-BB with neutral with four aluminium pars, 500V, 100A

Supplying and erecting plywood 12 mm thick fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners supports, nuts bolts etc. complete. (1.2X1.2 SQ.MTR+0.8X0.8 SQ.MTR= 2.08 SQ.MTR.)

Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. For Type -II Quarters. (14 SWG [email protected]./Sq.Mtrs. 0.4x1x2+0.4x0.8x 2 + 0.8 * 1 * 2 = 3.04 sq.mirs. So 3.04 Sq.mtrx15.69Kgs.=47.70 Kgs. And for feeder pillar stand made from angle 50x50x6 7.4 * 2 + 0.8 * 2 + 1 * 4 = 6.4 Mtrs. @ 4.5 Kgs./Mtr.So 6 4 mtrs.x4.5 Kgs. =28.80 Kgs. back frame for meter angle 40x40x5 @3kg/mtr. 1.2x4 +support 0.3048 * 4 = 6.02 Mtr.x 3 kgs 18.0

6 kgs..+frunt [email protected]/mtr.1.2x4=4.8 1.2 * 4 = 4.8 0 mtr+0.3048x4=1.22 6.02mtrsx1.4kgs=8.43 kgs Total sheet & iron 7.7 + 28.8 + 18.05 + 8.43 = 102.99Kgs work For Type -III Quarters. (14 S'NG 0.8 * 2 + 0.8 * 0.8 * 2 = 2.56 sq.mtrs. So 2.56 Sq.mtrx15.69Kgs. 40.17 Kgs. And for feeder pillar stand made from angle 50x50x6 0.4 * 2 + 0.8 * 2 + 1 * 4 = 6.4 Mtrs. @ 4.5 Kgs./Mtr. So 6.4 mtrs.x4.5 Kgs.-28.80 Kgs. back frame for 0.4 * 0.8 * 2 + 0.4x 6-1-21

Supplying and erecting expanded metal jali enclosure made from Gl square mesh 15 SWG having 20/25 mm squares, properly fixed/welded and duly painted with one coat of red oxide and two coats of silver/enamel paint complete (size of jali or enclosure 12X1.2 SQ.MTR+0.8X0.8 SQ MTR 2.08 SQ.MTR)

Supplying, erecting & terminating XLPE arnoured cable 2 core 4 sq. mm, aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete etected with glands & lugs, on wall/ trusses/pole or ed in provided trench/ pipe as per specification no. CB-LT/AL (por connection 31 mtrs.so for 13 connection 13x31-403 mtrs.)

Supplying, erecting & terminating XLPE armoured cable 2 core 6 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no CB-LT/AL (per connection 31 mtrs.so for 7 connection 7x31-217 mirs.)

Supplying, erecting & terminating XLPE armoured 229.95 cable 3% core 25 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 4 core 6 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) earth wire complete erected with glands & lugs, on wal!! trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XPLE armoured cable 4 core 16 sq. mm. aluminium conductor with continuous 5.48 sq. ram. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying & erecting G.I. pipe 'A' class 50 mm dia, erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying & erecting cast iron cable indicator plate buried along with route of cable for PVC/XLPE armoured cable as per specification no. CB-CIP

Providing & erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 imm thick) Gl sheet of 300 min width & 75 mm height complete with necessary coupler plates & hardware in approved manner.

Providing & erecting Hot dipped galvanized cover suitable for perforated type cable tray manufactured from 18 swg (1.2 mm thick) Gl sheet of 300 mm width & 20 mm height complete with necessary hardware in approved manner.

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. ΕΑ-ΕΡ

Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials as per specification no. EA-EP

Making trench of suitable width and depth in hard murum tar road for laying provided LT cable up to and including 16 sq. mm cornplete as per specification no. CW-EXN-CTR

Making trench of suitable width and depth in hard murum / tar road for laying provided LT cable of 16 sq. inm & above and covered with half round hume pice complete as per specification no. CW-EXN-CTR