REPAIR / MAINT SUBMERSIBLE PUMPING SETS, LT PANELS, WATER LEVEL INDICATORS, DOSING EQUIPMENT AND CERTAIN MISC WORK AT FATEHGARH CANTT UNDER AGE(I) FATEHGARH.

Amount

Supply & fix in replacement of DOL Starter 415 Volt suitable for 5 HP motor complete all as specified and directed,

Supply & fix in replacement of Contactor ML-3 rangge 50-70 Amp suitable to operate 40-45 HP submersible pumping set complete all as specified and directed. ( Make Havells and equvivalent as approved by the GE)

Supply & fix in replacement of Contactor ML-2 rangge 35-60 Amp suitable to operate 20-40 HP submersible pumping set complete all as specified and directed. ( Make Havells and equivalent as approved by the GE)

Supply & fix in replacement of Contactor ML-3 range 60-95 Amp suitable to operate 40-45 HP submersible pumping set complete all as specified and directed. ( Make Havells and equvivalent as approved by the AGE (I)

M&L for taking out unserviceable submersible pumping set complete with column pipe any capacity and any type from existing bore well carefully without damaging the p/set including connecting parts and lowering the same after repair including provision of suitable size of nut & bolts with washer and suitable packing for column pipes and connection of submersible cable complete all as directed. NOTE: (1) Chain pully block and clamps etc shall be provided by contractor. (2) Necessary safety pracaution will be responsibility of the contractor. (3) Parts replaced of submersible pump set shall be measured and paid seperately under relevant item here in after under as supply only. (4) No extra payment will be made to the contractor for note (1) and (2) above.

Dismantling of submersible motor 40 to 41 HP and taking out unserviceable spares and burnt copper binding wire complete. M&L for rewinding of submersible motor with insulated copper winding wire including sleeves as per original company and replacement of worn out parts, including grinding & polishing of rotor sleeves and refixing, testing & transport charges complete all as specified & directed Note:(Parts for following items shall be paid under relevent item here-in-after under as supply).

All as per item above but for motor 30 to 35 HP motor complete all as specified & directed

All as per item above but for motor 25 HP motor complete all as specified & directed

All as per item above but for motor 15 HP motor complete all as specified & directed

Supply only the following parts of the submersible pump and motor for capacity upto 15 HP of existing make/company complete all as specified & directed.

(a) Impeller

(b) Neck ring

(c ) Shaft sleeve

(d) Pump shaft

(e) Coupling

(f) Coupling key

(g) Impeller key

(h) Stud with nuts

(i) Thrust bearing

(j) Lower housing bush

(k) Upper housing bush

(l) Rotor shaft sleave

(m) Drain plug

(n) Water seal

(o) CI Bowl

(p) Rotor Shaft

(q) ball bush

Supply only the following parts of the submersible pump and motor for capacity upto 25 HP of existing make/company complete all as specified & directed.

(a) Impeller

(b) Neck ring

(c ) Shaft sleeve

(d) Pump shaft

(e) Coupling

(f) Coupling key

(g) Impeller key

(h) Stud with nuts

(i) Thrust bearing

(j) Lower housing bush

(k) Upper housing bush

(l) Rotor shaft sleave

(m) Drain plug

(n) Water seal

(o) CI Bowl

(p) Rotor Shaft

(q) ball bush

Supply only the following parts of the submersible pump and motor for capacity upto 30 to 35 HP of existing make/company complete all as specified & directed.

(a) Impeller

(b) Neck ring

(c ) Shaft sleeve

(d) Pump shaft

(e) Coupling

(f) Coupling key

(g) Impeller key

(h) Stud with nuts

(i) Thrust bearing

(j) Lower housing bush

(k) Upper housing bush

(l) Rotor shaft sleave

(m) Drain plug

(n) Water seal

(o) CI Bowl

(p) Rotor Shaft

(q) ball bush

Supply only the following parts of the submersible pump and motor for capacity upto 40 to 41 HP of existing make/company complete all as specified & directed.

(a) Impeller

(b) Neck ring

(c ) Shaft sleeve

(d) Pump shaft

(e) Coupling

(f) Coupling key

(g) Impeller key

(h) Stud with nuts

(i) Thrust bearing

(j) Lower housing bush

(k) Upper housing bush

(l) Rotor shaft sleave

(m) Drain plug

(n) Water seal

(o) CI Bowl

(p) Rotor Shaft

(q) ball bush

Supply & fix in replacement of Water pressure guage 100 mm dia in size ranging 0 to 25 kg/ sq cm calibration complete with size 3/8"X1/2" and brass cock 1/2" dia complete all as directed.

Supply & fix in replacement of electronic Timer for Star Delta Starter type ETSD2 Cat No TESD 2 timing range 3-30 sec complete all as specified and directed.

Supply & fix in replacement of Single Phase Preventor for 15/25/35/41 HP submersible pumping set motor complete all as specified and directed .

Supply & fix in replacement of overload protection relay for FASD starter ranging 28-42/30-35 Amp complete all as specified and directed .

S&F in replacement of Digital type ampere meter of size 96x96mm with CT 100/5 Amp,AC,3 phase,415 volts complete all as specified & directed.

S&F in replacement of Digital type voltmeter of size 96x96mm AC, 3P, 415 volts complete all as specified and directed.

Supply,fixing ,testing and commissioning submersible cable ,flat, 16 sqmm,3 core,PVC insulated and PVC sheathed with multi stranded, copper conductor,1100 Volts grade ,fixed to submersible motor column pipe ,using suitable size of clamps made out of stainless steel flat of size 20 x2 mm with steel nuts ,bolts & washer for every column pipe of 3 m length complete all as specified and directed.

M&L in replacement of star delta starter without sheet metal enclosure fixed in existing panel for FASD starter with relay ranging 45 to 70 Amps, suitable for submersible pumping 3 Phase,415 Volts,50 Hz including single phase preventor complete all as specified and directed.

S&F in replacement MCCB , 4 pole, 415 Volt, fixed type 315 amp with breaking capacity 35 kA including complete electrical connection using appropirate size of copper lugs complate all as specified and directed.

S&F MCCB , 4 pole, 415 Volt, adjustable type 250 Amp with breaking capacity 36kA including complete electrical connection using appropirate size of copper lugs complate all as specified and directed.

S&F in replacement MCCB , 4 pole, 415 Volt, fixed type 200 amp with breaking capacity 36 kA including complete electrical connection using appropirate size of copper lugs complate all as specified and directed.

S&F in replacement MCCB , 4 pole, 415 Volt, fixed type 160 amp with breaking capacity 36 kA including complete electrical connection using appropirate size of copper lugs complate all as specified and directed.

S&F in replacement MCCB , 4 pole, 415 Volt, fixed type 125 amp with breaking capacity 16 kA including complete electrical connection using appropirate size of copper lugs complate all as specified and directed.

S&F in replacement MCCB , 3 pole, 415 Volt, fixed type 100 amp with breaking capacity 16 kA including complete electrical connection using appropirate size of copper lugs complate all as specified and directed.

Supply Only in repair 15 mm dia Unplasticized PVC pipes of pressure rating 10 kgf/sq. cm fixed on wall with suitable size of pvc clamp complete all as specified and directed.

Supply Only of gate valve suitable for uPVC pipe 15 mm dia complete all as spcified and directed.

Supply Only gear oil SAE 80W/90 complete all as specified and directed.

Day to day checking, Calibration of pressure knob and Maintenance of chemical dozing plant/chloronome plant & BP dozer, minor repair/replacement of defective parts installed at New Kashim Bagh pump house complete all as specified and directed. NOTE : (i) Tools/ plant and safety equipment required to complete the job shall be provided by the contractor. (ii) Transportation for the personal deployed for attending the complaints to be provided by the contractor to avoid time delay

All as per item above but at Old Kashim Bagh pump house.

All as per item above but at New Rajput pump house.

All as per item above but at Old Rajput pump house

All as per itemabove but at Sub stock pump house.

All as per item above but at Yadunath pump house.

All as per item above but at Jora Line pump house.

All as per item above but at Moude Line pump house.

All as per itemabove but at Children School Pump house.

All as per item above but at Swimming Pool pump house.

(III) PANEL ACCESSORIES & CONTROL COMPONENT IP42 ENCLOSURES CONTROL MCB,DP,06A, CONTROL MCB,SP,06A 6" COOLING FAN 230VAC WITH JALI LOUVER WITH FILTER LED DOOR L/S-1NO+1NC PVC CHANNEL WITH COVER POWER WIRINNG & CONTROL WIRING WITH 1MM LEGEND/DANGER LOGO/YELLOW STICKER & FERRULE MISSCELL. ITEM-NUT BOLT /WASHER/SLEEV/INSULATOR (IV) PROTECTTION OVERVOLTAGE, UNDERVOLATGE, SINGLE PHASE, PHASE REVERS, OVERLOAD, PHASE UNBALANCE, LOAD UNBALANCE,

M/S S P CONSTRUCTION